diff mbox

[2/2] drm/i915: Implement Link Rate fallback on Link training failure

Message ID d796cc0c2814d668a47ef43c464f9a4089d46d64.1481883920.git.jani.nikula@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jani Nikula Dec. 16, 2016, 10:29 a.m. UTC
From: Manasi Navare <manasi.d.navare@intel.com>

If link training at a link rate optimal for a particular
mode fails during modeset's atomic commit phase, then we
let the modeset complete and then retry. We save the link rate
value at which link training failed, update the link status property
to "BAD" and use a lower link rate to prune the modes. It will redo
the modeset on the current mode at lower link rate or if the current
mode gets pruned due to lower link constraints then, it will send a
hotplug uevent for userspace to handle it.

This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
4.3.1.6.

v9:
* Use the trimmed max values of link rate/lane count based on
link train fallback (Daniel Vetter)
v8:
* Set link_status to BAD first and then call mode_valid (Jani Nikula)
v7:
Remove the redundant variable in previous patch itself
v6:
* Obtain link rate index from fallback_link_rate using
the helper intel_dp_link_rate_index (Jani Nikula)
* Include fallback within intel_dp_start_link_train (Jani Nikula)
v5:
* Move set link status to drm core (Daniel Vetter, Jani Nikula)
v4:
* Add fallback support for non DDI platforms too
* Set connector->link status inside set_link_status function
(Jani Nikula)
v3:
* Set link status property to BAd unconditionally (Jani Nikula)
* Dont use two separate variables link_train_failed and link_status
to indicate same thing (Jani Nikula)
v2:
* Squashed a few patches (Jani Nikula)

Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c               | 27 +++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp_link_training.c | 22 ++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h              |  3 +++
 3 files changed, 50 insertions(+), 2 deletions(-)

Comments

Daniel Vetter March 1, 2017, 3:44 p.m. UTC | #1
On Fri, Dec 16, 2016 at 12:29:07PM +0200, Jani Nikula wrote:
> From: Manasi Navare <manasi.d.navare@intel.com>
> 
> If link training at a link rate optimal for a particular
> mode fails during modeset's atomic commit phase, then we
> let the modeset complete and then retry. We save the link rate
> value at which link training failed, update the link status property
> to "BAD" and use a lower link rate to prune the modes. It will redo
> the modeset on the current mode at lower link rate or if the current
> mode gets pruned due to lower link constraints then, it will send a
> hotplug uevent for userspace to handle it.
> 
> This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
> 4.3.1.6.
> 
> v9:
> * Use the trimmed max values of link rate/lane count based on
> link train fallback (Daniel Vetter)
> v8:
> * Set link_status to BAD first and then call mode_valid (Jani Nikula)
> v7:
> Remove the redundant variable in previous patch itself
> v6:
> * Obtain link rate index from fallback_link_rate using
> the helper intel_dp_link_rate_index (Jani Nikula)
> * Include fallback within intel_dp_start_link_train (Jani Nikula)
> v5:
> * Move set link status to drm core (Daniel Vetter, Jani Nikula)
> v4:
> * Add fallback support for non DDI platforms too
> * Set connector->link status inside set_link_status function
> (Jani Nikula)
> v3:
> * Set link status property to BAd unconditionally (Jani Nikula)
> * Dont use two separate variables link_train_failed and link_status
> to indicate same thing (Jani Nikula)
> v2:
> * Squashed a few patches (Jani Nikula)
> 
> Acked-by: Tony Cheng <tony.cheng@amd.com>
> Acked-by: Harry Wentland <Harry.wentland@amd.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pushed to drm-misc-next after a quick irc chat with Manasi.

Thanks, Daniel

> ---
>  drivers/gpu/drm/i915/intel_dp.c               | 27 +++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dp_link_training.c | 22 ++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_drv.h              |  3 +++
>  3 files changed, 50 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 45ebc9632633..97d1e03d22b8 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5671,6 +5671,29 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>  	return false;
>  }
>  
> +static void intel_dp_modeset_retry_work_fn(struct work_struct *work)
> +{
> +	struct intel_connector *intel_connector;
> +	struct drm_connector *connector;
> +
> +	intel_connector = container_of(work, typeof(*intel_connector),
> +				       modeset_retry_work);
> +	connector = &intel_connector->base;
> +	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
> +		      connector->name);
> +
> +	/* Grab the locks before changing connector property*/
> +	mutex_lock(&connector->dev->mode_config.mutex);
> +	/* Set connector link status to BAD and send a Uevent to notify
> +	 * userspace to do a modeset.
> +	 */
> +	drm_mode_connector_set_link_status_property(connector,
> +						    DRM_MODE_LINK_STATUS_BAD);
> +	mutex_unlock(&connector->dev->mode_config.mutex);
> +	/* Send Hotplug uevent so userspace can reprobe */
> +	drm_kms_helper_hotplug_event(connector->dev);
> +}
> +
>  bool
>  intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  			struct intel_connector *intel_connector)
> @@ -5683,6 +5706,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  	enum port port = intel_dig_port->port;
>  	int type;
>  
> +	/* Initialize the work for modeset in case of link train failure */
> +	INIT_WORK(&intel_connector->modeset_retry_work,
> +		  intel_dp_modeset_retry_work_fn);
> +
>  	if (WARN(intel_dig_port->max_lanes < 1,
>  		 "Not enough lanes (%d) for DP on port %c\n",
>  		 intel_dig_port->max_lanes, port_name(port)))
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index 0048b520baf7..955b239e7c2d 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -313,6 +313,24 @@ void intel_dp_stop_link_train(struct intel_dp *intel_dp)
>  void
>  intel_dp_start_link_train(struct intel_dp *intel_dp)
>  {
> -	intel_dp_link_training_clock_recovery(intel_dp);
> -	intel_dp_link_training_channel_equalization(intel_dp);
> +	struct intel_connector *intel_connector = intel_dp->attached_connector;
> +
> +	if (!intel_dp_link_training_clock_recovery(intel_dp))
> +		goto failure_handling;
> +	if (!intel_dp_link_training_channel_equalization(intel_dp))
> +		goto failure_handling;
> +
> +	DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d",
> +		      intel_dp->link_rate, intel_dp->lane_count);
> +	return;
> +
> + failure_handling:
> +	DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d",
> +		      intel_dp->link_rate, intel_dp->lane_count);
> +	if (!intel_dp_get_link_train_fallback_values(intel_dp,
> +						     intel_dp->link_rate,
> +						     intel_dp->lane_count))
> +		/* Schedule a Hotplug Uevent to userspace to start modeset */
> +		schedule_work(&intel_connector->modeset_retry_work);
> +	return;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 362f698af2a0..6e01870ea79b 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -315,6 +315,9 @@ struct intel_connector {
>  	void *port; /* store this opaque as its illegal to dereference it */
>  
>  	struct intel_dp *mst_port;
> +
> +	/* Work struct to schedule a uevent on link train failure */
> +	struct work_struct modeset_retry_work;
>  };
>  
>  struct dpll {
> -- 
> 2.1.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 45ebc9632633..97d1e03d22b8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5671,6 +5671,29 @@  static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	return false;
 }
 
+static void intel_dp_modeset_retry_work_fn(struct work_struct *work)
+{
+	struct intel_connector *intel_connector;
+	struct drm_connector *connector;
+
+	intel_connector = container_of(work, typeof(*intel_connector),
+				       modeset_retry_work);
+	connector = &intel_connector->base;
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
+		      connector->name);
+
+	/* Grab the locks before changing connector property*/
+	mutex_lock(&connector->dev->mode_config.mutex);
+	/* Set connector link status to BAD and send a Uevent to notify
+	 * userspace to do a modeset.
+	 */
+	drm_mode_connector_set_link_status_property(connector,
+						    DRM_MODE_LINK_STATUS_BAD);
+	mutex_unlock(&connector->dev->mode_config.mutex);
+	/* Send Hotplug uevent so userspace can reprobe */
+	drm_kms_helper_hotplug_event(connector->dev);
+}
+
 bool
 intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 			struct intel_connector *intel_connector)
@@ -5683,6 +5706,10 @@  intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	enum port port = intel_dig_port->port;
 	int type;
 
+	/* Initialize the work for modeset in case of link train failure */
+	INIT_WORK(&intel_connector->modeset_retry_work,
+		  intel_dp_modeset_retry_work_fn);
+
 	if (WARN(intel_dig_port->max_lanes < 1,
 		 "Not enough lanes (%d) for DP on port %c\n",
 		 intel_dig_port->max_lanes, port_name(port)))
diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
index 0048b520baf7..955b239e7c2d 100644
--- a/drivers/gpu/drm/i915/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
@@ -313,6 +313,24 @@  void intel_dp_stop_link_train(struct intel_dp *intel_dp)
 void
 intel_dp_start_link_train(struct intel_dp *intel_dp)
 {
-	intel_dp_link_training_clock_recovery(intel_dp);
-	intel_dp_link_training_channel_equalization(intel_dp);
+	struct intel_connector *intel_connector = intel_dp->attached_connector;
+
+	if (!intel_dp_link_training_clock_recovery(intel_dp))
+		goto failure_handling;
+	if (!intel_dp_link_training_channel_equalization(intel_dp))
+		goto failure_handling;
+
+	DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d",
+		      intel_dp->link_rate, intel_dp->lane_count);
+	return;
+
+ failure_handling:
+	DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d",
+		      intel_dp->link_rate, intel_dp->lane_count);
+	if (!intel_dp_get_link_train_fallback_values(intel_dp,
+						     intel_dp->link_rate,
+						     intel_dp->lane_count))
+		/* Schedule a Hotplug Uevent to userspace to start modeset */
+		schedule_work(&intel_connector->modeset_retry_work);
+	return;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 362f698af2a0..6e01870ea79b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -315,6 +315,9 @@  struct intel_connector {
 	void *port; /* store this opaque as its illegal to dereference it */
 
 	struct intel_dp *mst_port;
+
+	/* Work struct to schedule a uevent on link train failure */
+	struct work_struct modeset_retry_work;
 };
 
 struct dpll {