diff mbox

[v3,12/21] drm/sun4i: tcon: Fix tcon channel 1 backporch calculation

Message ID e4c28363d94e8966866792df3bbd786332c8e931.1495006350.git-series.maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard May 17, 2017, 7:40 a.m. UTC
It seems like what's called a backporch in the datasheet is actually the
backporch plus the sync period. Fix that in our driver.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 74aa01e75e32..931dd374552e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -269,7 +269,7 @@  void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
 
 	/* Set horizontal display timings */
-	bp = mode->crtc_htotal - mode->crtc_hsync_end;
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
 	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
 			 mode->htotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
@@ -277,7 +277,7 @@  void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
 
 	/* Set vertical display timings */
-	bp = mode->crtc_vtotal - mode->crtc_vsync_end;
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
 	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
 			 mode->vtotal, bp);
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,