| Message ID | 1430388527-16700-2-git-send-email-anand.jain@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Apr 30, 2015 at 06:08:45PM +0800, Anand Jain wrote: > Controlled EIO from the device is achieved using the dm device. > Helper functions are at common/dmerror. > > Broadly steps will include calling _init_dm_error_dev() with a blk > device as an argument, typically this device can be a device pealed > from the SCRATCH_DEV_POOL, and init_dm_error_dev() will use > this blk device as backing store of dm linear device and assign > DM_ERROR_DEV to /dev/mapper/error-dev, which then can be assigned back > to the SCRATCH_DEV_POOL. Don't play games with device pools like this. Create a single error device from the SCRATCH_DEV, just like the dm-flakey code does. That way this code can be used by any filesystem. And like the dmflakey code, build the dm tables at init time so you don't need all the blockdev variables to built them later on. > When test script is read to get EIO, the test cases can call ^^^^ ready? > _load_dm_error_table() which then it will load the dm error. > so that reading DM_ERROR_DEV will cause EIO. After the test case is > complete, cleanup must be done by calling _cleanup_dm_error_dev(). > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > --- > common/dmerror | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > common/rc | 18 ++++++++++++++++ > 2 files changed, 83 insertions(+) > create mode 100644 common/dmerror > > diff --git a/common/dmerror b/common/dmerror > new file mode 100644 > index 0000000..e1f92e6 > --- /dev/null > +++ b/common/dmerror > @@ -0,0 +1,65 @@ > +##/bin/bash > +# > +# Copyright (c) 2015 Oracle. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +# > +# > +# common functions for setting up and tearing down a dmerror device > + > +_init_dm_error_dev() > +{ > + DM_ERROR_DEV='' > + $DMSETUP_PROG remove error-dev > /dev/null 2>&1 > + DM_BLK_DEV=$1 > + [ -b $DM_BLK_DEV ] || _fatal "$DM_BLK_DEV is not a block device" This has already been checked in the _require function, right? > + DM_DEV_SIZE=`blockdev --getsz $DM_BLK_DEV` > + [ $? -ne 0 ] && _fatal "failed to failed to read block dev size" And so this will never fail. > + LINEAR_TABLE="0 $DM_DEV_SIZE linear $DM_BLK_DEV 0" > + $DMSETUP_PROG create error-dev --table "$LINEAR_TABLE" || \ > + _fatal "failed to create dm linear device" > + > + DM_ERROR_DEV='/dev/mapper/error-dev' > + blockdev --setra 0 $DM_ERROR_DEV > + [ $? -ne 0 ] && _fatal "failed to failed to setra for $DM_ERROR_DEV" Why are you doing this here, and, FWIW, it can't fail, either. > +} > + > +_cleanup_dm_error_dev() > +{ > + DM_ERROR_DEV='' > + $DMSETUP_PROG remove error-dev > /dev/null 2>&1 > +} > + > +_load_dm_error_table() > +{ > + [ -z $DM_BLK_DEV ] && _fatal "DM_BLK_DEV is not set" > + [ -z $DM_ERROR_DEV ] && _fatal "DM_ERROR_DEV is not set" > + [ -z $DM_DEV_SIZE ] && _fatal "DM_DEV_SIZE is not set call init_error_dev first" These are not necessary if the tables are already built. > + > + ERROR_TABLE="0 $DM_DEV_SIZE error $DM_BLK_DEV 0" > + $DMSETUP_PROG load error-dev --table "$ERROR_TABLE" > + [ $? -ne 0 ] && _fatal "failed to load table into error-dev" > + > + $DMSETUP_PROG resume error-dev > + [ $? -ne 0 ] && _fatal "failed to resume error-dev" > + > + dd if=$DM_ERROR_DEV of=/dev/null count=1 > /dev/null 2>&1 > + [ $? -ne 0 ] || _fatal "failed to fail IO to $DM_ERROR_DEV" There is no need to test the dm-error device like this. If it's not failing IO, then the caller is going to fail because the filesystem failed to fail like expected... > diff --git a/common/rc b/common/rc > index c5db0dd..2a50491 100644 > --- a/common/rc > +++ b/common/rc > @@ -1305,6 +1305,24 @@ _require_block_device() > fi > } > > +# this test requires the device mapper error target > +# > +_require_dm_error() > +{ > + DM_BACKSTORE_DEV=$1 > + # require SCRATCH_DEV to be a valid block device > + _require_block_device $DM_BACKSTORE_DEV > + _require_command "$DMSETUP_PROG" dmsetup 8 space tabs, please, and this function can go in common/dmerror, too. > + > + $DMSETUP_PROG targets | grep error >/dev/null 2>&1 > + if [ $? -eq 0 ] > + then > + : > + else > + _notrun "This test requires dm error support" > + fi if [...]; then else fi Cheers, Dave.
diff --git a/common/dmerror b/common/dmerror new file mode 100644 index 0000000..e1f92e6 --- /dev/null +++ b/common/dmerror @@ -0,0 +1,65 @@ +##/bin/bash +# +# Copyright (c) 2015 Oracle. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# +# common functions for setting up and tearing down a dmerror device + +_init_dm_error_dev() +{ + DM_ERROR_DEV='' + $DMSETUP_PROG remove error-dev > /dev/null 2>&1 + DM_BLK_DEV=$1 + [ -b $DM_BLK_DEV ] || _fatal "$DM_BLK_DEV is not a block device" + + DM_DEV_SIZE=`blockdev --getsz $DM_BLK_DEV` + [ $? -ne 0 ] && _fatal "failed to failed to read block dev size" + + LINEAR_TABLE="0 $DM_DEV_SIZE linear $DM_BLK_DEV 0" + $DMSETUP_PROG create error-dev --table "$LINEAR_TABLE" || \ + _fatal "failed to create dm linear device" + + DM_ERROR_DEV='/dev/mapper/error-dev' + blockdev --setra 0 $DM_ERROR_DEV + [ $? -ne 0 ] && _fatal "failed to failed to setra for $DM_ERROR_DEV" +} + +_cleanup_dm_error_dev() +{ + DM_ERROR_DEV='' + $DMSETUP_PROG remove error-dev > /dev/null 2>&1 +} + +_load_dm_error_table() +{ + [ -z $DM_BLK_DEV ] && _fatal "DM_BLK_DEV is not set" + [ -z $DM_ERROR_DEV ] && _fatal "DM_ERROR_DEV is not set" + [ -z $DM_DEV_SIZE ] && _fatal "DM_DEV_SIZE is not set call init_error_dev first" + + echo 3 > /proc/sys/vm/drop_caches + $DMSETUP_PROG suspend error-dev + [ $? -ne 0 ] && _fatal "failed to suspend error-dev" + + ERROR_TABLE="0 $DM_DEV_SIZE error $DM_BLK_DEV 0" + $DMSETUP_PROG load error-dev --table "$ERROR_TABLE" + [ $? -ne 0 ] && _fatal "failed to load table into error-dev" + + $DMSETUP_PROG resume error-dev + [ $? -ne 0 ] && _fatal "failed to resume error-dev" + + dd if=$DM_ERROR_DEV of=/dev/null count=1 > /dev/null 2>&1 + [ $? -ne 0 ] || _fatal "failed to fail IO to $DM_ERROR_DEV" +} diff --git a/common/rc b/common/rc index c5db0dd..2a50491 100644 --- a/common/rc +++ b/common/rc @@ -1305,6 +1305,24 @@ _require_block_device() fi } +# this test requires the device mapper error target +# +_require_dm_error() +{ + DM_BACKSTORE_DEV=$1 + # require SCRATCH_DEV to be a valid block device + _require_block_device $DM_BACKSTORE_DEV + _require_command "$DMSETUP_PROG" dmsetup + + $DMSETUP_PROG targets | grep error >/dev/null 2>&1 + if [ $? -eq 0 ] + then + : + else + _notrun "This test requires dm error support" + fi +} + # this test requires the device mapper flakey target # _require_dm_flakey()
Controlled EIO from the device is achieved using the dm device. Helper functions are at common/dmerror. Broadly steps will include calling _init_dm_error_dev() with a blk device as an argument, typically this device can be a device pealed from the SCRATCH_DEV_POOL, and init_dm_error_dev() will use this blk device as backing store of dm linear device and assign DM_ERROR_DEV to /dev/mapper/error-dev, which then can be assigned back to the SCRATCH_DEV_POOL. When test script is read to get EIO, the test cases can call _load_dm_error_table() which then it will load the dm error. so that reading DM_ERROR_DEV will cause EIO. After the test case is complete, cleanup must be done by calling _cleanup_dm_error_dev(). Signed-off-by: Anand Jain <anand.jain@oracle.com> --- common/dmerror | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ common/rc | 18 ++++++++++++++++ 2 files changed, 83 insertions(+) create mode 100644 common/dmerror