@@ -40,6 +40,10 @@
#define NUMPRINTCOLUMNS 32 /* # columns of data to print on each line */
+/* Operation flags */
+
+enum opflags { FL_NONE = 0, FL_SKIPPED = 1, FL_CLOSE_OPEN = 2, FL_KEEP_SIZE = 4 };
+
/*
* A log entry is an operation and a bunch of arguments.
*/
@@ -47,6 +51,7 @@
struct log_entry {
int operation;
int args[3];
+ enum opflags flags;
};
#define LOGSIZE 10000
@@ -73,9 +78,7 @@ int logcount = 0; /* total ops */
*
* When mapped read/writes are disabled, they are simply converted to normal
* reads and writes. When fallocate/fpunch calls are disabled, they are
- * converted to OP_SKIPPED. Hence OP_SKIPPED needs to have a number higher than
- * the operation selction matrix, as does the OP_CLOSEOPEN which is an
- * operation modifier rather than an operation in itself.
+ * skipped.
*
* Because of the "lite" version, we also need to have different "maximum
* operation" defines to allow the ops to be selected correctly based on the
@@ -98,10 +101,6 @@ int logcount = 0; /* total ops */
#define OP_INSERT_RANGE 9
#define OP_MAX_FULL 10
-/* operation modifiers */
-#define OP_CLOSEOPEN 100
-#define OP_SKIPPED 101
-
#undef PAGE_SIZE
#define PAGE_SIZE getpagesize()
#undef PAGE_MASK
@@ -222,17 +221,18 @@ prterr(char *prefix)
void
-log4(int operation, int arg0, int arg1, int arg2)
+log4(int operation, int arg0, int arg1, enum opflags flags)
{
struct log_entry *le;
le = &oplog[logptr];
le->operation = operation;
if (closeopen)
- le->operation = ~ le->operation;
+ flags |= FL_CLOSE_OPEN;
le->args[0] = arg0;
le->args[1] = arg1;
- le->args[2] = arg2;
+ le->args[2] = file_size;
+ le->flags = flags;
logptr++;
logcount++;
if (logptr >= LOGSIZE)
@@ -245,7 +245,6 @@ logdump(void)
{
int i, count, down;
struct log_entry *lp;
- char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"};
prt("LOG DUMP (%d total operations):\n", logcount);
if (logcount < LOGSIZE) {
@@ -261,9 +260,12 @@ logdump(void)
opnum = i+1 + (logcount/LOGSIZE)*LOGSIZE;
prt("%d(%3d mod 256): ", opnum, opnum%256);
lp = &oplog[i];
- if ((closeopen = lp->operation < 0))
- lp->operation = ~ lp->operation;
-
+
+ if (lp->flags & FL_SKIPPED) {
+ prt("SKIPPED (no operation)");
+ goto skipped;
+ }
+
switch (lp->operation) {
case OP_MAPREAD:
prt("MAPREAD 0x%x thru 0x%x\t(0x%x bytes)",
@@ -302,18 +304,24 @@ logdump(void)
prt("\t***WWWW");
break;
case OP_TRUNCATE:
- down = lp->args[0] < lp->args[1];
+ down = lp->args[1] < lp->args[2];
prt("TRUNCATE %s\tfrom 0x%x to 0x%x",
- down ? "DOWN" : "UP", lp->args[1], lp->args[0]);
- if (badoff >= lp->args[!down] &&
- badoff < lp->args[!!down])
+ down ? "DOWN" : "UP", lp->args[2], lp->args[1]);
+ if (badoff >= lp->args[1 + !down] &&
+ badoff < lp->args[1 + !!down])
prt("\t******WWWW");
break;
case OP_FALLOCATE:
/* 0: offset 1: length 2: where alloced */
- prt("FALLOC 0x%x thru 0x%x\t(0x%x bytes) %s",
+ prt("FALLOC 0x%x thru 0x%x\t(0x%x bytes) ",
lp->args[0], lp->args[0] + lp->args[1],
- lp->args[1], falloc_type[lp->args[2]]);
+ lp->args[1]);
+ if (lp->args[0] + lp->args[1] <= lp->args[2])
+ prt("INTERIOR");
+ else if (lp->flags & FL_KEEP_SIZE)
+ prt("PAST_EOF");
+ else
+ prt("EXTENDING");
if (badoff >= lp->args[0] &&
badoff < lp->args[0] + lp->args[1])
prt("\t******FFFF");
@@ -350,14 +358,12 @@ logdump(void)
lp->args[0] + lp->args[1])
prt("\t******IIII");
break;
- case OP_SKIPPED:
- prt("SKIPPED (no operation)");
- break;
default:
prt("BOGUS LOG ENTRY (operation code = %d)!",
lp->operation);
}
- if (closeopen)
+ skipped:
+ if (lp->flags & FL_CLOSE_OPEN)
prt("\n\t\tCLOSE/OPEN");
prt("\n");
i++;
@@ -549,17 +555,17 @@ doread(unsigned offset, unsigned size)
if (size == 0) {
if (!quiet && testcalls > simulatedopcount && !o_direct)
prt("skipping zero size read\n");
- log4(OP_SKIPPED, OP_READ, offset, size);
+ log4(OP_READ, offset, size, FL_SKIPPED);
return;
}
if (size + offset > file_size) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping seek/read past end of file\n");
- log4(OP_SKIPPED, OP_READ, offset, size);
+ log4(OP_READ, offset, size, FL_SKIPPED);
return;
}
- log4(OP_READ, offset, size, 0);
+ log4(OP_READ, offset, size, FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -628,17 +634,17 @@ domapread(unsigned offset, unsigned size)
if (size == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero size read\n");
- log4(OP_SKIPPED, OP_MAPREAD, offset, size);
+ log4(OP_MAPREAD, offset, size, FL_SKIPPED);
return;
}
if (size + offset > file_size) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping seek/read past end of file\n");
- log4(OP_SKIPPED, OP_MAPREAD, offset, size);
+ log4(OP_MAPREAD, offset, size, FL_SKIPPED);
return;
}
- log4(OP_MAPREAD, offset, size, 0);
+ log4(OP_MAPREAD, offset, size, FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -697,11 +703,11 @@ dowrite(unsigned offset, unsigned size)
if (size == 0) {
if (!quiet && testcalls > simulatedopcount && !o_direct)
prt("skipping zero size write\n");
- log4(OP_SKIPPED, OP_WRITE, offset, size);
+ log4(OP_WRITE, offset, size, FL_SKIPPED);
return;
}
- log4(OP_WRITE, offset, size, file_size);
+ log4(OP_WRITE, offset, size, FL_NONE);
gendata(original_buf, good_buf, offset, size);
if (file_size < offset + size) {
@@ -763,12 +769,12 @@ domapwrite(unsigned offset, unsigned size)
if (size == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero size write\n");
- log4(OP_SKIPPED, OP_MAPWRITE, offset, size);
+ log4(OP_MAPWRITE, offset, size, FL_SKIPPED);
return;
}
cur_filesize = file_size;
- log4(OP_MAPWRITE, offset, size, 0);
+ log4(OP_MAPWRITE, offset, size, FL_NONE);
gendata(original_buf, good_buf, offset, size);
if (file_size < offset + size) {
@@ -835,7 +841,7 @@ dotruncate(unsigned size)
prt("truncating to largest ever: 0x%x\n", size);
}
- log4(OP_TRUNCATE, size, (unsigned)file_size, 0);
+ log4(OP_TRUNCATE, 0, size, FL_NONE);
if (size > file_size)
memset(good_buf + file_size, '\0', size - file_size);
@@ -867,20 +873,20 @@ do_punch_hole(unsigned offset, unsigned length)
if (length == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero length punch hole\n");
- log4(OP_SKIPPED, OP_PUNCH_HOLE, offset, length);
+ log4(OP_PUNCH_HOLE, offset, length, FL_SKIPPED);
return;
}
if (file_size <= (loff_t)offset) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping hole punch off the end of the file\n");
- log4(OP_SKIPPED, OP_PUNCH_HOLE, offset, length);
+ log4(OP_PUNCH_HOLE, offset, length, FL_SKIPPED);
return;
}
end_offset = offset + length;
- log4(OP_PUNCH_HOLE, offset, length, 0);
+ log4(OP_PUNCH_HOLE, offset, length, FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -922,7 +928,8 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
if (length == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero length zero range\n");
- log4(OP_SKIPPED, OP_ZERO_RANGE, offset, length);
+ log4(OP_ZERO_RANGE, offset, length, FL_SKIPPED |
+ (keep_size ? FL_KEEP_SIZE : FL_NONE));
return;
}
@@ -940,7 +947,8 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
* 1: extending prealloc
* 2: interior prealloc
*/
- log4(OP_ZERO_RANGE, offset, length, (end_offset > file_size) ? (keep_size ? 0 : 1) : 2);
+ log4(OP_ZERO_RANGE, offset, length,
+ keep_size ? FL_KEEP_SIZE : FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -978,7 +986,7 @@ do_collapse_range(unsigned offset, unsigned length)
if (length == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero length collapse range\n");
- log4(OP_SKIPPED, OP_COLLAPSE_RANGE, offset, length);
+ log4(OP_COLLAPSE_RANGE, offset, length, FL_SKIPPED);
return;
}
@@ -986,11 +994,11 @@ do_collapse_range(unsigned offset, unsigned length)
if ((loff_t)end_offset >= file_size) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping collapse range behind EOF\n");
- log4(OP_SKIPPED, OP_COLLAPSE_RANGE, offset, length);
+ log4(OP_COLLAPSE_RANGE, offset, length, FL_SKIPPED);
return;
}
- log4(OP_COLLAPSE_RANGE, offset, length, 0);
+ log4(OP_COLLAPSE_RANGE, offset, length, FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -1030,18 +1038,18 @@ do_insert_range(unsigned offset, unsigned length)
if (length == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero length insert range\n");
- log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
+ log4(OP_INSERT_RANGE, offset, length, FL_SKIPPED);
return;
}
if ((loff_t)offset >= file_size) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping insert range behind EOF\n");
- log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
+ log4(OP_INSERT_RANGE, offset, length, FL_SKIPPED);
return;
}
- log4(OP_INSERT_RANGE, offset, length, 0);
+ log4(OP_INSERT_RANGE, offset, length, FL_NONE);
if (testcalls <= simulatedopcount)
return;
@@ -1083,7 +1091,8 @@ do_preallocate(unsigned offset, unsigned length, int keep_size)
if (length == 0) {
if (!quiet && testcalls > simulatedopcount)
prt("skipping zero length fallocate\n");
- log4(OP_SKIPPED, OP_FALLOCATE, offset, length);
+ log4(OP_FALLOCATE, offset, length, FL_SKIPPED |
+ (keep_size ? FL_KEEP_SIZE : FL_NONE));
return;
}
@@ -1101,7 +1110,8 @@ do_preallocate(unsigned offset, unsigned length, int keep_size)
* 1: extending prealloc
* 2: interior prealloc
*/
- log4(OP_FALLOCATE, offset, length, (end_offset > file_size) ? (keep_size ? 0 : 1) : 2);
+ log4(OP_FALLOCATE, offset, length,
+ keep_size ? FL_KEEP_SIZE : FL_NONE);
if (end_offset > file_size) {
memset(good_buf + file_size, '\0', end_offset - file_size);
@@ -1251,31 +1261,31 @@ test(void)
break;
case OP_FALLOCATE:
if (!fallocate_calls) {
- log4(OP_SKIPPED, OP_FALLOCATE, offset, size);
+ log4(OP_FALLOCATE, offset, size, FL_SKIPPED);
goto out;
}
break;
case OP_PUNCH_HOLE:
if (!punch_hole_calls) {
- log4(OP_SKIPPED, OP_PUNCH_HOLE, offset, size);
+ log4(OP_PUNCH_HOLE, offset, size, FL_SKIPPED);
goto out;
}
break;
case OP_ZERO_RANGE:
if (!zero_range_calls) {
- log4(OP_SKIPPED, OP_ZERO_RANGE, offset, size);
+ log4(OP_ZERO_RANGE, offset, size, FL_SKIPPED);
goto out;
}
break;
case OP_COLLAPSE_RANGE:
if (!collapse_range_calls) {
- log4(OP_SKIPPED, OP_COLLAPSE_RANGE, offset, size);
+ log4(OP_COLLAPSE_RANGE, offset, size, FL_SKIPPED);
goto out;
}
break;
case OP_INSERT_RANGE:
if (!insert_range_calls) {
- log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+ log4(OP_INSERT_RANGE, offset, size, FL_SKIPPED);
goto out;
}
break;
@@ -1326,7 +1336,7 @@ test(void)
offset = offset & ~(block_size - 1);
size = size & ~(block_size - 1);
if (size == 0) {
- log4(OP_SKIPPED, OP_COLLAPSE_RANGE, offset, size);
+ log4(OP_COLLAPSE_RANGE, offset, size, FL_SKIPPED);
goto out;
}
do_collapse_range(offset, size);
@@ -1337,11 +1347,11 @@ test(void)
offset = offset & ~(block_size - 1);
size = size & ~(block_size - 1);
if (size == 0) {
- log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+ log4(OP_INSERT_RANGE, offset, size, FL_SKIPPED);
goto out;
}
if (file_size + size > maxfilelen) {
- log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
+ log4(OP_INSERT_RANGE, offset, size, FL_SKIPPED);
goto out;
}
Add FL_SKIPPED, FL_CLOSE_OPEN, and FL_KEEP_SIZE flags to the log entries. Use FL_SKIPPED to indicate that an operation was skipped. Use FL_CLOSE_OPEN to encode when an operation is followed by a close/open cycle. Use FL_KEEP_SIZE to indicate when the OP_ZERO_RANGE and OP_FALLOCATE operations should keep the file size unchanged and put the current file size into args[2] so that we can tell which operation was actually called from the log. After that, arg2 of log4 is always either unused or the current file size, so remove it and unconditionally remember the current file size. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> --- ltp/fsx.c | 122 +++++++++++++++++++++++++++++++++----------------------------- 1 file changed, 66 insertions(+), 56 deletions(-)