diff mbox

[1/3] btrfs: add test for an incremental send after moving directories around

Message ID 1467462728-14495-1-git-send-email-fdmanana@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Filipe Manana July 2, 2016, 12:32 p.m. UTC
From: Filipe Manana <fdmanana@suse.com>

Test that an incremental send operation works after doing radical changes
in the directory hierarchy that involve switching the inode that directory
entries point to.

This test exercises scenarios used to fail in btrfs and are fixed by the
following patches for the linux kernel:

 "Btrfs: send, fix failure to move directories with the same name around"
 "Btrfs: incremental send, fix invalid paths for rename operations"

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 tests/btrfs/124     | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/124.out |   2 +
 tests/btrfs/group   |   1 +
 3 files changed, 264 insertions(+)
 create mode 100755 tests/btrfs/124
 create mode 100644 tests/btrfs/124.out

Comments

Eryu Guan July 12, 2016, 3:58 a.m. UTC | #1
On Sat, Jul 02, 2016 at 01:32:08PM +0100, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Test that an incremental send operation works after doing radical changes
> in the directory hierarchy that involve switching the inode that directory
> entries point to.
> 
> This test exercises scenarios used to fail in btrfs and are fixed by the
> following patches for the linux kernel:
> 
>  "Btrfs: send, fix failure to move directories with the same name around"
>  "Btrfs: incremental send, fix invalid paths for rename operations"
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>  tests/btrfs/124     | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/124.out |   2 +
>  tests/btrfs/group   |   1 +
>  3 files changed, 264 insertions(+)
>  create mode 100755 tests/btrfs/124
>  create mode 100644 tests/btrfs/124.out
> 
> diff --git a/tests/btrfs/124 b/tests/btrfs/124
> new file mode 100755
> index 0000000..38635a3
> --- /dev/null
> +++ b/tests/btrfs/124
> @@ -0,0 +1,261 @@
> +#! /bin/bash
> +# FS QA Test No. btrfs/124
> +#
> +# Test that an incremental send operation works after doing radical changes
> +# in the directory hierarchy that involve switching the inode that directory
> +# entries point to.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (C) 2016 SUSE Linux Products GmbH. All Rights Reserved.
> +# Author: Filipe Manana <fdmanana@suse.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
	cd /
to make it consistent with other _cleanup :)

> +	rm -fr $send_files_dir
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_fssum
> +
> +send_files_dir=$TEST_DIR/btrfs-test-$seq

These three tests all take use of $TEST_DIR, but don't _require_test, I
think we need it in these tests.

> +
> +rm -f $seqres.full
> +rm -fr $send_files_dir
> +mkdir $send_files_dir
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +# case 1
> +mkdir -p $SCRATCH_MNT/case_1/d/p1
> +mkdir $SCRATCH_MNT/case_1/p1
> +
> +# case 2
> +mkdir -p $SCRATCH_MNT/case_2/a
> +mkdir $SCRATCH_MNT/case_2/d
> +mkdir $SCRATCH_MNT/case_2/e
> +mkdir $SCRATCH_MNT/case_2/f
> +mkdir $SCRATCH_MNT/case_2/ance
> +mkdir $SCRATCH_MNT/case_2/d/ance
> +mkdir $SCRATCH_MNT/case_2/a/c
> +mv $SCRATCH_MNT/case_2/e $SCRATCH_MNT/case_2/d/ance
> +mv $SCRATCH_MNT/case_2/f $SCRATCH_MNT/case_2/d/ance
> +mv $SCRATCH_MNT/case_2/ance $SCRATCH_MNT/case_2/d/ance
> +
> +# case 3
> +mkdir -p $SCRATCH_MNT/case_3/d
> +mkdir $SCRATCH_MNT/case_3/a
> +mkdir $SCRATCH_MNT/case_3/waiting_dir
> +mkdir -p $SCRATCH_MNT/case_3/pre/ance
> +mkdir $SCRATCH_MNT/case_3/d/ance
> +mkdir $SCRATCH_MNT/case_3/a/c
> +mv $SCRATCH_MNT/case_3/waiting_dir $SCRATCH_MNT/case_3/d/ance
> +
> +# case 4
> +mkdir -p $SCRATCH_MNT/case_4/tmp
> +mkdir $SCRATCH_MNT/case_4/below_ance
> +mkdir -p $SCRATCH_MNT/case_4/pre/wait_dir
> +mkdir $SCRATCH_MNT/case_4/desc
> +mkdir $SCRATCH_MNT/case_4/ance
> +mv $SCRATCH_MNT/case_4/below_ance $SCRATCH_MNT/case_4/ance
> +mkdir $SCRATCH_MNT/case_4/other_dir
> +
> +# Filesystem looks like:
> +#
> +# .                                                                  (ino 256)
> +# |--- case_1/                                                       (ino 257)
> +# |       |---- d/                                                   (ino 258)
> +# |       |     |--- p1/                                             (ino 259)
> +# |       |
> +# |       |---- p1/                                                  (ino 260)
> +# |
> +# |--- case_2/                                                       (ino 261)
> +# |       |---- a/                                                   (ino 262)
> +# |       |     |---- c/                                             (ino 268)
> +# |       |
> +# |       |---- d/                                                   (ino 263)
> +# |             |---- ance/                                          (ino 267)
> +# |                     |---- e/                                     (ino 264)
> +# |                     |---- f/                                     (ino 265)
> +# |                     |---- ance/                                  (ino 266)
> +# |
> +# |--- case_3/                                                       (ino 269)
> +# |       |---- a/                                                   (ino 271)
> +# |       |     |---- c/                                             (ino 276)
> +# |       |
> +# |       |---- d/                                                   (ino 270)
> +# |       |     |---- ance/                                          (ino 275)
> +# |       |             |---- waiting_dir/                           (ino 272)
> +# |       |
> +# |       |---- pre/                                                 (ino 273)
> +# |              |---- ance/                                         (ino 274)
> +# |
> +# |--- case_4/                                                       (ino 277)
> +#         |---- tmp/                                                 (ino 278)
> +#         |---- pre/                                                 (ino 280)
> +#         |      |---- wait_dir/                                     (ino 281)
> +#         |
> +#         |---- desc/                                                (ino 282)
> +#         |---- ance/                                                (ino 283)
> +#         |       |---- below_ance/                                  (ino 279)
> +#         |
> +#         |---- other_dir/                                           (ino 284)
> +#
> +_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1

Please avoid using _run_btrfs_util_prog and run_check, as Dave explained
before (and I summarized them in this email
http://www.spinics.net/lists/fstests/msg03311.html :-)

So just dump the output and do necessary filters to match golden image.
I think this also makes it easier to know what's failing, the diff
output shows it directly, there's no need to check $seqres.full again.

And this test failed due to memory allocation, is this expected?

At subvol /mnt/testarea/scratch/mysnap2
ERROR: send ioctl failed with -12: Cannot allocate memory
failed: '/usr/bin/btrfs send -p /mnt/testarea/scratch/mysnap1 /mnt/testarea/scratch/mysnap2 -f /mnt/testarea/test/btrfs-test-127/2.snap'

I'm using btrfs-progs v4.6

Otherwise these three tests look good to me.

Thanks,
Eryu
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Filipe Manana July 12, 2016, 8:36 a.m. UTC | #2
On Tue, Jul 12, 2016 at 4:58 AM, Eryu Guan <eguan@redhat.com> wrote:
> On Sat, Jul 02, 2016 at 01:32:08PM +0100, fdmanana@kernel.org wrote:
>> From: Filipe Manana <fdmanana@suse.com>
>>
>> Test that an incremental send operation works after doing radical changes
>> in the directory hierarchy that involve switching the inode that directory
>> entries point to.
>>
>> This test exercises scenarios used to fail in btrfs and are fixed by the
>> following patches for the linux kernel:
>>
>>  "Btrfs: send, fix failure to move directories with the same name around"
>>  "Btrfs: incremental send, fix invalid paths for rename operations"
>>
>> Signed-off-by: Filipe Manana <fdmanana@suse.com>
>> ---
>>  tests/btrfs/124     | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/btrfs/124.out |   2 +
>>  tests/btrfs/group   |   1 +
>>  3 files changed, 264 insertions(+)
>>  create mode 100755 tests/btrfs/124
>>  create mode 100644 tests/btrfs/124.out
>>
>> diff --git a/tests/btrfs/124 b/tests/btrfs/124
>> new file mode 100755
>> index 0000000..38635a3
>> --- /dev/null
>> +++ b/tests/btrfs/124
>> @@ -0,0 +1,261 @@
>> +#! /bin/bash
>> +# FS QA Test No. btrfs/124
>> +#
>> +# Test that an incremental send operation works after doing radical changes
>> +# in the directory hierarchy that involve switching the inode that directory
>> +# entries point to.
>> +#
>> +#-----------------------------------------------------------------------
>> +# Copyright (C) 2016 SUSE Linux Products GmbH. All Rights Reserved.
>> +# Author: Filipe Manana <fdmanana@suse.com>
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +tmp=/tmp/$$
>> +status=1     # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>         cd /
> to make it consistent with other _cleanup :)
>
>> +     rm -fr $send_files_dir
>> +     rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# real QA test starts here
>> +_supported_fs btrfs
>> +_supported_os Linux
>> +_require_scratch
>> +_require_fssum
>> +
>> +send_files_dir=$TEST_DIR/btrfs-test-$seq
>
> These three tests all take use of $TEST_DIR, but don't _require_test, I
> think we need it in these tests.
>
>> +
>> +rm -f $seqres.full
>> +rm -fr $send_files_dir
>> +mkdir $send_files_dir
>> +
>> +_scratch_mkfs >>$seqres.full 2>&1
>> +_scratch_mount
>> +
>> +# case 1
>> +mkdir -p $SCRATCH_MNT/case_1/d/p1
>> +mkdir $SCRATCH_MNT/case_1/p1
>> +
>> +# case 2
>> +mkdir -p $SCRATCH_MNT/case_2/a
>> +mkdir $SCRATCH_MNT/case_2/d
>> +mkdir $SCRATCH_MNT/case_2/e
>> +mkdir $SCRATCH_MNT/case_2/f
>> +mkdir $SCRATCH_MNT/case_2/ance
>> +mkdir $SCRATCH_MNT/case_2/d/ance
>> +mkdir $SCRATCH_MNT/case_2/a/c
>> +mv $SCRATCH_MNT/case_2/e $SCRATCH_MNT/case_2/d/ance
>> +mv $SCRATCH_MNT/case_2/f $SCRATCH_MNT/case_2/d/ance
>> +mv $SCRATCH_MNT/case_2/ance $SCRATCH_MNT/case_2/d/ance
>> +
>> +# case 3
>> +mkdir -p $SCRATCH_MNT/case_3/d
>> +mkdir $SCRATCH_MNT/case_3/a
>> +mkdir $SCRATCH_MNT/case_3/waiting_dir
>> +mkdir -p $SCRATCH_MNT/case_3/pre/ance
>> +mkdir $SCRATCH_MNT/case_3/d/ance
>> +mkdir $SCRATCH_MNT/case_3/a/c
>> +mv $SCRATCH_MNT/case_3/waiting_dir $SCRATCH_MNT/case_3/d/ance
>> +
>> +# case 4
>> +mkdir -p $SCRATCH_MNT/case_4/tmp
>> +mkdir $SCRATCH_MNT/case_4/below_ance
>> +mkdir -p $SCRATCH_MNT/case_4/pre/wait_dir
>> +mkdir $SCRATCH_MNT/case_4/desc
>> +mkdir $SCRATCH_MNT/case_4/ance
>> +mv $SCRATCH_MNT/case_4/below_ance $SCRATCH_MNT/case_4/ance
>> +mkdir $SCRATCH_MNT/case_4/other_dir
>> +
>> +# Filesystem looks like:
>> +#
>> +# .                                                                  (ino 256)
>> +# |--- case_1/                                                       (ino 257)
>> +# |       |---- d/                                                   (ino 258)
>> +# |       |     |--- p1/                                             (ino 259)
>> +# |       |
>> +# |       |---- p1/                                                  (ino 260)
>> +# |
>> +# |--- case_2/                                                       (ino 261)
>> +# |       |---- a/                                                   (ino 262)
>> +# |       |     |---- c/                                             (ino 268)
>> +# |       |
>> +# |       |---- d/                                                   (ino 263)
>> +# |             |---- ance/                                          (ino 267)
>> +# |                     |---- e/                                     (ino 264)
>> +# |                     |---- f/                                     (ino 265)
>> +# |                     |---- ance/                                  (ino 266)
>> +# |
>> +# |--- case_3/                                                       (ino 269)
>> +# |       |---- a/                                                   (ino 271)
>> +# |       |     |---- c/                                             (ino 276)
>> +# |       |
>> +# |       |---- d/                                                   (ino 270)
>> +# |       |     |---- ance/                                          (ino 275)
>> +# |       |             |---- waiting_dir/                           (ino 272)
>> +# |       |
>> +# |       |---- pre/                                                 (ino 273)
>> +# |              |---- ance/                                         (ino 274)
>> +# |
>> +# |--- case_4/                                                       (ino 277)
>> +#         |---- tmp/                                                 (ino 278)
>> +#         |---- pre/                                                 (ino 280)
>> +#         |      |---- wait_dir/                                     (ino 281)
>> +#         |
>> +#         |---- desc/                                                (ino 282)
>> +#         |---- ance/                                                (ino 283)
>> +#         |       |---- below_ance/                                  (ino 279)
>> +#         |
>> +#         |---- other_dir/                                           (ino 284)
>> +#
>> +_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1
>
> Please avoid using _run_btrfs_util_prog and run_check, as Dave explained
> before (and I summarized them in this email
> http://www.spinics.net/lists/fstests/msg03311.html :-)

Yeah, I know that.
But for snapshot creation we always do it like that or, like in some
older tests something like:

$BTRFS_UTIL_PROG subvolume snapshot $1 $SNAPNAME > /dev/null || _fail
"snapshot create failed"

That's because the output of the snapshot command in the tools has
changed many times in the past (and sometimes radically).

>
> So just dump the output and do necessary filters to match golden image.
> I think this also makes it easier to know what's failing, the diff
> output shows it directly, there's no need to check $seqres.full again.
>
> And this test failed due to memory allocation, is this expected?

Yes. Infinite path build loops keep allocating memory in each
iteration, that's why you get enomem.

>
> At subvol /mnt/testarea/scratch/mysnap2
> ERROR: send ioctl failed with -12: Cannot allocate memory
> failed: '/usr/bin/btrfs send -p /mnt/testarea/scratch/mysnap1 /mnt/testarea/scratch/mysnap2 -f /mnt/testarea/test/btrfs-test-127/2.snap'
>
> I'm using btrfs-progs v4.6

Doesn't matter, it's exclusively a kernel side issue.

>
> Otherwise these three tests look good to me.

thanks

>
> Thanks,
> Eryu
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/btrfs/124 b/tests/btrfs/124
new file mode 100755
index 0000000..38635a3
--- /dev/null
+++ b/tests/btrfs/124
@@ -0,0 +1,261 @@ 
+#! /bin/bash
+# FS QA Test No. btrfs/124
+#
+# Test that an incremental send operation works after doing radical changes
+# in the directory hierarchy that involve switching the inode that directory
+# entries point to.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2016 SUSE Linux Products GmbH. All Rights Reserved.
+# Author: Filipe Manana <fdmanana@suse.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	rm -fr $send_files_dir
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_fssum
+
+send_files_dir=$TEST_DIR/btrfs-test-$seq
+
+rm -f $seqres.full
+rm -fr $send_files_dir
+mkdir $send_files_dir
+
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+# case 1
+mkdir -p $SCRATCH_MNT/case_1/d/p1
+mkdir $SCRATCH_MNT/case_1/p1
+
+# case 2
+mkdir -p $SCRATCH_MNT/case_2/a
+mkdir $SCRATCH_MNT/case_2/d
+mkdir $SCRATCH_MNT/case_2/e
+mkdir $SCRATCH_MNT/case_2/f
+mkdir $SCRATCH_MNT/case_2/ance
+mkdir $SCRATCH_MNT/case_2/d/ance
+mkdir $SCRATCH_MNT/case_2/a/c
+mv $SCRATCH_MNT/case_2/e $SCRATCH_MNT/case_2/d/ance
+mv $SCRATCH_MNT/case_2/f $SCRATCH_MNT/case_2/d/ance
+mv $SCRATCH_MNT/case_2/ance $SCRATCH_MNT/case_2/d/ance
+
+# case 3
+mkdir -p $SCRATCH_MNT/case_3/d
+mkdir $SCRATCH_MNT/case_3/a
+mkdir $SCRATCH_MNT/case_3/waiting_dir
+mkdir -p $SCRATCH_MNT/case_3/pre/ance
+mkdir $SCRATCH_MNT/case_3/d/ance
+mkdir $SCRATCH_MNT/case_3/a/c
+mv $SCRATCH_MNT/case_3/waiting_dir $SCRATCH_MNT/case_3/d/ance
+
+# case 4
+mkdir -p $SCRATCH_MNT/case_4/tmp
+mkdir $SCRATCH_MNT/case_4/below_ance
+mkdir -p $SCRATCH_MNT/case_4/pre/wait_dir
+mkdir $SCRATCH_MNT/case_4/desc
+mkdir $SCRATCH_MNT/case_4/ance
+mv $SCRATCH_MNT/case_4/below_ance $SCRATCH_MNT/case_4/ance
+mkdir $SCRATCH_MNT/case_4/other_dir
+
+# Filesystem looks like:
+#
+# .                                                                  (ino 256)
+# |--- case_1/                                                       (ino 257)
+# |       |---- d/                                                   (ino 258)
+# |       |     |--- p1/                                             (ino 259)
+# |       |
+# |       |---- p1/                                                  (ino 260)
+# |
+# |--- case_2/                                                       (ino 261)
+# |       |---- a/                                                   (ino 262)
+# |       |     |---- c/                                             (ino 268)
+# |       |
+# |       |---- d/                                                   (ino 263)
+# |             |---- ance/                                          (ino 267)
+# |                     |---- e/                                     (ino 264)
+# |                     |---- f/                                     (ino 265)
+# |                     |---- ance/                                  (ino 266)
+# |
+# |--- case_3/                                                       (ino 269)
+# |       |---- a/                                                   (ino 271)
+# |       |     |---- c/                                             (ino 276)
+# |       |
+# |       |---- d/                                                   (ino 270)
+# |       |     |---- ance/                                          (ino 275)
+# |       |             |---- waiting_dir/                           (ino 272)
+# |       |
+# |       |---- pre/                                                 (ino 273)
+# |              |---- ance/                                         (ino 274)
+# |
+# |--- case_4/                                                       (ino 277)
+#         |---- tmp/                                                 (ino 278)
+#         |---- pre/                                                 (ino 280)
+#         |      |---- wait_dir/                                     (ino 281)
+#         |
+#         |---- desc/                                                (ino 282)
+#         |---- ance/                                                (ino 283)
+#         |       |---- below_ance/                                  (ino 279)
+#         |
+#         |---- other_dir/                                           (ino 284)
+#
+_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1
+
+# case 1
+#
+# The directory named "d" (inode 257) has in both snapshots an entry with the
+# name "p1" but it refers to different inodes in both snapshots (inode 258 in
+# the parent snapshot and inode 259 in the send snapshot). When attempting to
+# move inode 258, the operation is delayed because its new parent, inode 259,
+# was not yet moved/renamed (as the stream is currently processing inode 258).
+# Later on when processing inode 259, btrfs' send also ended up delaying the
+# move/rename operation for this inode, so that it would happen after inode 258
+# was processed, creating a circular dependency that resulted in the send stream
+# terminating without issuing a rename operations for the inodes 258 and 259.
+#
+mv $SCRATCH_MNT/case_1/d/p1 $SCRATCH_MNT/case_1/p1
+mv $SCRATCH_MNT/case_1/p1 $SCRATCH_MNT/case_1/d
+
+# case 2
+#
+# When the inode 265 is processed, the path for inode 267 is computed, which at
+# that time corresponds to "case_2/d/ance", and it was stored in the name cache
+# (to avoid recomputing it again later when needed).
+# Later on when processing inode 266, btrfs' send end up orphanizing (renaming
+# to a name matching the pattern o<ino>-<gen>-<seq>) inode 267 because it has
+# the same name as inode 266 and at that time it's a child of the new parent
+# directory (inode 263) for inode 266. After the orphanization and while still
+# processing inode 266, a rename operation for inode 266 was generated. However
+# the source path for that rename operation was incorrect because it ended up
+# using the old, pre-orphanization, name of inode 267.
+#
+mv $SCRATCH_MNT/case_2/a/c $SCRATCH_MNT/case_2
+mv $SCRATCH_MNT/case_2/d/ance $SCRATCH_MNT/case_2/c
+mv $SCRATCH_MNT/case_2/c/ance/ance $SCRATCH_MNT/case_2/d
+mv $SCRATCH_MNT/case_2/c/ance/f $SCRATCH_MNT/case_2
+mv $SCRATCH_MNT/case_2/c/ance/e $SCRATCH_MNT/case_2/f
+
+# case 3
+#
+# This is similar to cases 1 and 2, but adding more complexity just to exercise
+# btrfs' incremental send correctness.
+#
+mv $SCRATCH_MNT/case_3/d/ance $SCRATCH_MNT/case_3/a
+mv $SCRATCH_MNT/case_3/a/c $SCRATCH_MNT/case_3
+mv $SCRATCH_MNT/case_3/a/ance/waiting_dir $SCRATCH_MNT/case_3/c
+mv $SCRATCH_MNT/case_3/pre/ance $SCRATCH_MNT/case_3/d
+mv $SCRATCH_MNT/case_3/pre $SCRATCH_MNT/case_3/c/waiting_dir
+
+# case 4
+#
+# When attempting to rename inode 283, the incremental send stream included an
+# invalid destination path for the rename command. This was due to a missing
+# path loop detection in the send code that made the rename of inode 283 happen
+# without waiting for the rename of inode 284 to happen first (since it's an
+# ancestor in the send snapshot that is beyond the current progress and it was
+# also renamed/moved).
+#
+mv $SCRATCH_MNT/case_4/other_dir $SCRATCH_MNT/case_4/tmp
+mv $SCRATCH_MNT/case_4/ance/below_ance $SCRATCH_MNT/case_4/tmp/other_dir
+mv $SCRATCH_MNT/case_4/pre/wait_dir $SCRATCH_MNT/case_4/tmp/other_dir
+mv $SCRATCH_MNT/case_4/pre $SCRATCH_MNT/case_4/tmp/other_dir/below_ance
+mv $SCRATCH_MNT/case_4/desc $SCRATCH_MNT/case_4/tmp/other_dir/wait_dir
+mv $SCRATCH_MNT/case_4/ance $SCRATCH_MNT/case_4/tmp/other_dir/wait_dir/desc
+
+# Filesystem now looks like:
+#
+# .                                                                  (ino 256)
+# |--- case_1/                                                       (ino 257)
+# |        |--- d/                                                   (ino 258)
+# |             |--- p1/                                             (ino 260)
+# |                   |--- p1/                                       (ino 259)
+# |
+# |--- case_2/                                                       (ino 261)
+# |       |---- a/                                                   (ino 262)
+# |       |---- c/                                                   (ino 268)
+# |       |     |---- ance/                                          (ino 267)
+# |       |
+# |       |---- d/                                                   (ino 263)
+# |       |     |---- ance/                                          (ino 266)
+# |       |
+# |       |---- f/                                                   (ino 265)
+# |             |---- e/                                             (ino 264)
+# |
+# |--- case_3/                                                       (ino 269)
+# |       |---- a/                                                   (ino 271)
+# |       |     |---- ance/                                          (ino 275)
+# |       |
+# |       |---- c/                                                   (ino 276)
+# |       |     |---- waiting_dir/                                   (ino 272)
+# |       |                   |---- pre/                             (ino 273)
+# |       |
+# |       |---- d/                                                   (ino 270)
+# |             |---- ance/                                          (ino 274)
+# |
+# |--- case_4/                                                       (ino 277)
+#         |---- tmp/                                                 (ino 278)
+#                |---- other_dir/                                    (ino 284)
+#                            |---- below_ance/                       (ino 279)
+#                            |            |---- pre/                 (ino 280)
+#                            |
+#                            |---- wait_dir/                         (ino 281)
+#                                       |---- desc/                  (ino 282)
+#                                               |---- ance/          (ino 283)
+#
+_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2
+
+run_check $FSSUM_PROG -A -f -w $send_files_dir/1.fssum $SCRATCH_MNT/mysnap1
+run_check $FSSUM_PROG -A -f -w $send_files_dir/2.fssum \
+	-x $SCRATCH_MNT/mysnap2/mysnap1 $SCRATCH_MNT/mysnap2
+
+_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap
+_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \
+	-f $send_files_dir/2.snap
+
+# Now recreate the filesystem by receiving both send streams and verify we get
+# the same content that the original filesystem had.
+_scratch_unmount
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
+run_check $FSSUM_PROG -r $send_files_dir/1.fssum $SCRATCH_MNT/mysnap1
+_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/2.snap
+run_check $FSSUM_PROG -r $send_files_dir/2.fssum $SCRATCH_MNT/mysnap2
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/btrfs/124.out b/tests/btrfs/124.out
new file mode 100644
index 0000000..d7339e6
--- /dev/null
+++ b/tests/btrfs/124.out
@@ -0,0 +1,2 @@ 
+QA output created by 124
+Silence is golden
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 5a26ed7..19f4688 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -126,3 +126,4 @@ 
 121 auto quick snapshot qgroup
 122 auto quick snapshot qgroup
 123 auto quick qgroup
+124 auto quick send