Message ID | 1487236435-6222-8-git-send-email-xzhou@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Feb 16, 2017 at 11:13 AM, Xiong Zhou <xzhou@redhat.com> wrote: > Lower dir comes from another overlayfs dir, then > accessing files in it should work. > > CC: Miklos Szeredi <mszeredi@redhat.com> > Signed-off-by: Xiong Zhou <xzhou@redhat.com> > --- > tests/overlay/029 | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/overlay/029.out | 3 ++ > tests/overlay/group | 1 + > 3 files changed, 96 insertions(+) > create mode 100755 tests/overlay/029 > create mode 100644 tests/overlay/029.out > > diff --git a/tests/overlay/029 b/tests/overlay/029 > new file mode 100755 > index 0000000..aedd141 > --- /dev/null > +++ b/tests/overlay/029 > @@ -0,0 +1,92 @@ > +#! /bin/bash > +# FS QA Test 029 > +# > +# There are dirs/files in lower dir and upper dir before > +# mounting overlayfs. After mounting, use dir in overlayfs > +# mountpoint as lowerdir to mount another overlayfs, then > +# access old files through the second overlayfs. It was > +# not working, kernel commit below fixed it. > +# > +# c4fcfc1619ea ovl: fix d_real() for stacked fs > +# > +# This reproducer was originally written by > +# Miklos Szeredi <mszeredi@redhat.com> > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2017 Red Hat Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs overlay > +_supported_os Linux > +_require_scratch > + > +# Remove all files from previous tests > +_scratch_mkfs > + > +# Preparing files > +upperdir=$SCRATCH_DEV/$OVERLAY_UPPER_DIR > +lowerdir=$SCRATCH_DEV/$OVERLAY_LOWER_DIR > +mkdir -p $upperdir/up > +echo foo > $upperdir/up/foo > +mkdir -p $lowerdir/low > +echo bar > $lowerdir/low/bar > + > +# mount overlay in SCRATCH_MNT > +_scratch_mount > + > +mkdir -p $tmp/{upper,mnt,work} > +# mount overlay again using lower dir from SCRATCH_MNT dir > +_overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \ comment and code mismatch lower vs. up > + overlay $tmp/mnt > +# accessing file in the second mount > +cat $tmp/mnt/foo > +$UMOUNT_PROG $tmp/mnt > + cleanup mount and $tmp/mnt on cleanup() > +# mount overlay again using upper dir from SCRATCH_MNT dir > +_overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \ comment and code mismatch upper vs. low > + overlay $tmp/mnt > +cat $tmp/mnt/bar > +$UMOUNT_PROG $tmp/mnt > + Suggesting to add: _overlay_mount_dirs $SCRATCH_MNT/ $tmp/{upper,work} \ overlay $tmp/mnt cat $tmp/mnt/up/foo cat $tmp/mnt/low/bar This differs from the 2 tests above in 2 ways: 1. $SCRATCH_MNT/ is an overlay root 2. $SCRATCH_MNT/ is a merge dir You may want to further split these 2 cases by creating up and low under a common 'ovl' base dir and testing both on $SCRATCH_MNT/ and $SCRATCH_MNT/ovl - not critical IMO. > +# success, all done > +status=0 > +exit > diff --git a/tests/overlay/029.out b/tests/overlay/029.out > new file mode 100644 > index 0000000..870fcd9 > --- /dev/null > +++ b/tests/overlay/029.out > @@ -0,0 +1,3 @@ > +QA output created by 029 > +foo > +bar > diff --git a/tests/overlay/group b/tests/overlay/group > index cf058fc..7e72a30 100644 > --- a/tests/overlay/group > +++ b/tests/overlay/group > @@ -31,3 +31,4 @@ > 026 auto attr quick > 027 auto quick perms > 028 auto copyup quick > +029 auto quick > -- > 1.8.3.1 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Feb 16, 2017 at 02:21:45PM +0200, Amir Goldstein wrote: > On Thu, Feb 16, 2017 at 11:13 AM, Xiong Zhou <xzhou@redhat.com> wrote: > > Lower dir comes from another overlayfs dir, then > > accessing files in it should work. > > > > CC: Miklos Szeredi <mszeredi@redhat.com> > > Signed-off-by: Xiong Zhou <xzhou@redhat.com> > > --- > > tests/overlay/029 | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/overlay/029.out | 3 ++ > > tests/overlay/group | 1 + > > 3 files changed, 96 insertions(+) > > create mode 100755 tests/overlay/029 > > create mode 100644 tests/overlay/029.out > > > > diff --git a/tests/overlay/029 b/tests/overlay/029 > > new file mode 100755 > > index 0000000..aedd141 > > --- /dev/null > > +++ b/tests/overlay/029 > > @@ -0,0 +1,92 @@ > > +#! /bin/bash > > +# FS QA Test 029 > > +# > > +# There are dirs/files in lower dir and upper dir before > > +# mounting overlayfs. After mounting, use dir in overlayfs > > +# mountpoint as lowerdir to mount another overlayfs, then > > +# access old files through the second overlayfs. It was > > +# not working, kernel commit below fixed it. > > +# > > +# c4fcfc1619ea ovl: fix d_real() for stacked fs > > +# > > +# This reproducer was originally written by > > +# Miklos Szeredi <mszeredi@redhat.com> > > +# > > +#----------------------------------------------------------------------- > > +# Copyright (c) 2017 Red Hat Inc. All Rights Reserved. > > +# > > +# This program is free software; you can redistribute it and/or > > +# modify it under the terms of the GNU General Public License as > > +# published by the Free Software Foundation. > > +# > > +# This program is distributed in the hope that it would be useful, > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +# GNU General Public License for more details. > > +# > > +# You should have received a copy of the GNU General Public License > > +# along with this program; if not, write the Free Software Foundation, > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > +#----------------------------------------------------------------------- > > +# > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > + > > +# remove previous $seqres.full before test > > +rm -f $seqres.full > > + > > +# real QA test starts here > > + > > +# Modify as appropriate. > > +_supported_fs overlay > > +_supported_os Linux > > +_require_scratch > > + > > +# Remove all files from previous tests > > +_scratch_mkfs > > + > > +# Preparing files > > +upperdir=$SCRATCH_DEV/$OVERLAY_UPPER_DIR > > +lowerdir=$SCRATCH_DEV/$OVERLAY_LOWER_DIR > > +mkdir -p $upperdir/up > > +echo foo > $upperdir/up/foo > > +mkdir -p $lowerdir/low > > +echo bar > $lowerdir/low/bar > > + > > +# mount overlay in SCRATCH_MNT > > +_scratch_mount > > + > > +mkdir -p $tmp/{upper,mnt,work} > > +# mount overlay again using lower dir from SCRATCH_MNT dir > > +_overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \ > > comment and code mismatch lower vs. up > > > + overlay $tmp/mnt > > +# accessing file in the second mount > > +cat $tmp/mnt/foo > > +$UMOUNT_PROG $tmp/mnt > > + > > cleanup mount and $tmp/mnt on cleanup() mounting again shortly.. > > > +# mount overlay again using upper dir from SCRATCH_MNT dir > > +_overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \ > > comment and code mismatch upper vs. low > > > + overlay $tmp/mnt > > +cat $tmp/mnt/bar > > +$UMOUNT_PROG $tmp/mnt > > + > > > Suggesting to add: > _overlay_mount_dirs $SCRATCH_MNT/ $tmp/{upper,work} \ > overlay $tmp/mnt > cat $tmp/mnt/up/foo > cat $tmp/mnt/low/bar > > This differs from the 2 tests above in 2 ways: > 1. $SCRATCH_MNT/ is an overlay root > 2. $SCRATCH_MNT/ is a merge dir Good point! Thanks! > > You may want to further split these 2 cases by creating up and low under > a common 'ovl' base dir and testing both on $SCRATCH_MNT/ and > $SCRATCH_MNT/ovl - not critical IMO. > > > > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/overlay/029.out b/tests/overlay/029.out > > new file mode 100644 > > index 0000000..870fcd9 > > --- /dev/null > > +++ b/tests/overlay/029.out > > @@ -0,0 +1,3 @@ > > +QA output created by 029 > > +foo > > +bar > > diff --git a/tests/overlay/group b/tests/overlay/group > > index cf058fc..7e72a30 100644 > > --- a/tests/overlay/group > > +++ b/tests/overlay/group > > @@ -31,3 +31,4 @@ > > 026 auto attr quick > > 027 auto quick perms > > 028 auto copyup quick > > +029 auto quick > > -- > > 1.8.3.1 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe fstests" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/overlay/029 b/tests/overlay/029 new file mode 100755 index 0000000..aedd141 --- /dev/null +++ b/tests/overlay/029 @@ -0,0 +1,92 @@ +#! /bin/bash +# FS QA Test 029 +# +# There are dirs/files in lower dir and upper dir before +# mounting overlayfs. After mounting, use dir in overlayfs +# mountpoint as lowerdir to mount another overlayfs, then +# access old files through the second overlayfs. It was +# not working, kernel commit below fixed it. +# +# c4fcfc1619ea ovl: fix d_real() for stacked fs +# +# This reproducer was originally written by +# Miklos Szeredi <mszeredi@redhat.com> +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Red Hat Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs overlay +_supported_os Linux +_require_scratch + +# Remove all files from previous tests +_scratch_mkfs + +# Preparing files +upperdir=$SCRATCH_DEV/$OVERLAY_UPPER_DIR +lowerdir=$SCRATCH_DEV/$OVERLAY_LOWER_DIR +mkdir -p $upperdir/up +echo foo > $upperdir/up/foo +mkdir -p $lowerdir/low +echo bar > $lowerdir/low/bar + +# mount overlay in SCRATCH_MNT +_scratch_mount + +mkdir -p $tmp/{upper,mnt,work} +# mount overlay again using lower dir from SCRATCH_MNT dir +_overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \ + overlay $tmp/mnt +# accessing file in the second mount +cat $tmp/mnt/foo +$UMOUNT_PROG $tmp/mnt + +# mount overlay again using upper dir from SCRATCH_MNT dir +_overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \ + overlay $tmp/mnt +cat $tmp/mnt/bar +$UMOUNT_PROG $tmp/mnt + +# success, all done +status=0 +exit diff --git a/tests/overlay/029.out b/tests/overlay/029.out new file mode 100644 index 0000000..870fcd9 --- /dev/null +++ b/tests/overlay/029.out @@ -0,0 +1,3 @@ +QA output created by 029 +foo +bar diff --git a/tests/overlay/group b/tests/overlay/group index cf058fc..7e72a30 100644 --- a/tests/overlay/group +++ b/tests/overlay/group @@ -31,3 +31,4 @@ 026 auto attr quick 027 auto quick perms 028 auto copyup quick +029 auto quick
Lower dir comes from another overlayfs dir, then accessing files in it should work. CC: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Xiong Zhou <xzhou@redhat.com> --- tests/overlay/029 | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++ tests/overlay/029.out | 3 ++ tests/overlay/group | 1 + 3 files changed, 96 insertions(+) create mode 100755 tests/overlay/029 create mode 100644 tests/overlay/029.out