Message ID | 1491595783-16079-1-git-send-email-martin@omnibond.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, 7 Apr 2017, Martin Brandenburg wrote: > The filesystem was renamed OrangeFS from PVFS2 recently. The mount -t > type remains pvfs2, so I have used that name throughout despite the > kernel module being named orangefs. > > We've been maintaining this as a patch for quite some time. > > The easiest way to use is to setup a single server installation with > multiple filesystems orangefs and scratch, put the following in > /etc/xfsqa.config, and run ./check -pvfs2 -g quick. > > TEST_DIR=/mnt > TEST_DEV=tcp://server1vm:3334/orangefs > SCRATCH_MNT=/scratch > SCRATCH_DEV=tcp://server1vm:3334/scratch > > Signed-off-by: Martin Brandenburg <martin@omnibond.com> > --- > check | 2 ++ > common/attr | 4 +++- > common/rc | 31 ++++++++++++++++++++++++++++++- > 3 files changed, 35 insertions(+), 2 deletions(-) > > diff --git a/check b/check > index 2fcf385..9cef58b 100755 > --- a/check > +++ b/check > @@ -68,6 +68,7 @@ check options > -glusterfs test GlusterFS > -cifs test CIFS > -overlay test overlay > + -pvfs2 test PVFS2 > -tmpfs test TMPFS > -l line mode diff > -udiff show unified diff (default) > @@ -264,6 +265,7 @@ while [ $# -gt 0 ]; do > -glusterfs) FSTYP=glusterfs ;; > -cifs) FSTYP=cifs ;; > -overlay) FSTYP=overlay; export OVERLAY=true ;; > + -pvfs2) FSTYP=pvfs2 ;; > -tmpfs) FSTYP=tmpfs ;; > > -g) group=$2 ; shift ; > diff --git a/common/attr b/common/attr > index 08643e6..ac139e6 100644 > --- a/common/attr > +++ b/common/attr > @@ -254,7 +254,7 @@ _sort_getfattr_output() > } > > # set maximum total attr space based on fs type > -if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" ]; then > +if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" -o "$FSTYP" == "pvfs2" ]; then > MAX_ATTRS=1000 > else # Assume max ~1 block of attrs > BLOCK_SIZE=`_get_block_size $TEST_DIR` > @@ -267,6 +267,8 @@ export MAX_ATTRS > # Set max attr value size based on fs type > if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" -o "$FSTYP" == "btrfs" ]; then > MAX_ATTRVAL_SIZE=64 > +elif [ "$FSTYP" == "pvfs2" ]; then > + MAX_ATTRVAL_SIZE=8192 > else # Assume max ~1 block of attrs > BLOCK_SIZE=`_get_block_size $TEST_DIR` > # leave a little overhead > diff --git a/common/rc b/common/rc > index e1ab2c6..be2bc26 100644 > --- a/common/rc > +++ b/common/rc > @@ -174,6 +174,8 @@ case "$FSTYP" in > reiser4) > [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found" > ;; > + pvfs2) > + ;; > esac > > if [ ! -z "$REPORT_LIST" ]; then > @@ -714,6 +716,9 @@ _test_mkfs() > overlay) > # do nothing for overlay > ;; > + pvfs2) > + # do nothing for pvfs2 > + ;; > udf) > $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null > ;; > @@ -738,6 +743,9 @@ _mkfs_dev() > overlay) > # do nothing for overlay > ;; > + pvfs2) > + # do nothing for pvfs2 > + ;; > udf) > $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd > ;; > @@ -793,7 +801,7 @@ _scratch_mkfs() > local mkfs_status > > case $FSTYP in > - nfs*|cifs|ceph|overlay|glusterfs) > + nfs*|cifs|ceph|overlay|glusterfs|pvfs2) > # unable to re-create this fstyp, just remove all files in > # $SCRATCH_MNT to avoid EEXIST caused by the leftover files > # created in previous runs > @@ -1513,6 +1521,14 @@ _require_scratch_nocheck() > _notrun "this test requires a valid \$SCRATCH_MNT" > fi > ;; > + pvfs2) > + echo $SCRATCH_DEV | grep -q "://" > /dev/null 2>&1 > + if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then > + _notrun "this test requires a valid \$SCRATCH_DEV" > + fi > + if [ ! -d "$SCRATCH_MNT" ]; then > + _notrun "this test requires a valid \$SCRATCH_MNT" > + fi Of course we need ;; here.... > cifs) > echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1 > if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then > @@ -1610,6 +1626,15 @@ _require_test() > _notrun "this test requires a valid \$TEST_DIR" > fi > ;; > + pvfs2) > + echo $TEST_DEV | grep -q "://" > /dev/null 2>&1 > + if [ -z "$TEST_DEV" -o "$?" != "0" ]; then > + _notrun "this test requires a valid \$TEST_DIR" > + fi > + if [ ! -d "$TEST_DIR" ]; then > + _notrun "this test requires a valid \$TEST_DIR" > + fi > + ;; > overlay) > if [ -z "$OVL_BASE_TEST_DIR" -o ! -d "$OVL_BASE_TEST_DIR" ]; then > _notrun "this test requires a valid \$TEST_DIR as ovl base dir" > @@ -2451,6 +2476,8 @@ _check_test_fs() > overlay) > # no way to check consistency for overlay > ;; > + pvfs2) > + ;; > udf) > # do nothing for now > ;; > @@ -2501,6 +2528,8 @@ _check_scratch_fs() > overlay) > # no way to check consistency for overlay > ;; > + pvfs2) > + ;; > btrfs) > _check_btrfs_filesystem $device > ;; > -- > 2.1.4 > > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/check b/check index 2fcf385..9cef58b 100755 --- a/check +++ b/check @@ -68,6 +68,7 @@ check options -glusterfs test GlusterFS -cifs test CIFS -overlay test overlay + -pvfs2 test PVFS2 -tmpfs test TMPFS -l line mode diff -udiff show unified diff (default) @@ -264,6 +265,7 @@ while [ $# -gt 0 ]; do -glusterfs) FSTYP=glusterfs ;; -cifs) FSTYP=cifs ;; -overlay) FSTYP=overlay; export OVERLAY=true ;; + -pvfs2) FSTYP=pvfs2 ;; -tmpfs) FSTYP=tmpfs ;; -g) group=$2 ; shift ; diff --git a/common/attr b/common/attr index 08643e6..ac139e6 100644 --- a/common/attr +++ b/common/attr @@ -254,7 +254,7 @@ _sort_getfattr_output() } # set maximum total attr space based on fs type -if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" ]; then +if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" -o "$FSTYP" == "pvfs2" ]; then MAX_ATTRS=1000 else # Assume max ~1 block of attrs BLOCK_SIZE=`_get_block_size $TEST_DIR` @@ -267,6 +267,8 @@ export MAX_ATTRS # Set max attr value size based on fs type if [ "$FSTYP" == "xfs" -o "$FSTYP" == "udf" -o "$FSTYP" == "btrfs" ]; then MAX_ATTRVAL_SIZE=64 +elif [ "$FSTYP" == "pvfs2" ]; then + MAX_ATTRVAL_SIZE=8192 else # Assume max ~1 block of attrs BLOCK_SIZE=`_get_block_size $TEST_DIR` # leave a little overhead diff --git a/common/rc b/common/rc index e1ab2c6..be2bc26 100644 --- a/common/rc +++ b/common/rc @@ -174,6 +174,8 @@ case "$FSTYP" in reiser4) [ "$MKFS_REISER4_PROG" = "" ] && _fatal "mkfs.reiser4 not found" ;; + pvfs2) + ;; esac if [ ! -z "$REPORT_LIST" ]; then @@ -714,6 +716,9 @@ _test_mkfs() overlay) # do nothing for overlay ;; + pvfs2) + # do nothing for pvfs2 + ;; udf) $MKFS_UDF_PROG $MKFS_OPTIONS $* $TEST_DEV > /dev/null ;; @@ -738,6 +743,9 @@ _mkfs_dev() overlay) # do nothing for overlay ;; + pvfs2) + # do nothing for pvfs2 + ;; udf) $MKFS_UDF_PROG $MKFS_OPTIONS $* 2>$tmp_dir.mkfserr 1>$tmp_dir.mkfsstd ;; @@ -793,7 +801,7 @@ _scratch_mkfs() local mkfs_status case $FSTYP in - nfs*|cifs|ceph|overlay|glusterfs) + nfs*|cifs|ceph|overlay|glusterfs|pvfs2) # unable to re-create this fstyp, just remove all files in # $SCRATCH_MNT to avoid EEXIST caused by the leftover files # created in previous runs @@ -1513,6 +1521,14 @@ _require_scratch_nocheck() _notrun "this test requires a valid \$SCRATCH_MNT" fi ;; + pvfs2) + echo $SCRATCH_DEV | grep -q "://" > /dev/null 2>&1 + if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then + _notrun "this test requires a valid \$SCRATCH_DEV" + fi + if [ ! -d "$SCRATCH_MNT" ]; then + _notrun "this test requires a valid \$SCRATCH_MNT" + fi cifs) echo $SCRATCH_DEV | grep -q "//" > /dev/null 2>&1 if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]; then @@ -1610,6 +1626,15 @@ _require_test() _notrun "this test requires a valid \$TEST_DIR" fi ;; + pvfs2) + echo $TEST_DEV | grep -q "://" > /dev/null 2>&1 + if [ -z "$TEST_DEV" -o "$?" != "0" ]; then + _notrun "this test requires a valid \$TEST_DIR" + fi + if [ ! -d "$TEST_DIR" ]; then + _notrun "this test requires a valid \$TEST_DIR" + fi + ;; overlay) if [ -z "$OVL_BASE_TEST_DIR" -o ! -d "$OVL_BASE_TEST_DIR" ]; then _notrun "this test requires a valid \$TEST_DIR as ovl base dir" @@ -2451,6 +2476,8 @@ _check_test_fs() overlay) # no way to check consistency for overlay ;; + pvfs2) + ;; udf) # do nothing for now ;; @@ -2501,6 +2528,8 @@ _check_scratch_fs() overlay) # no way to check consistency for overlay ;; + pvfs2) + ;; btrfs) _check_btrfs_filesystem $device ;;
The filesystem was renamed OrangeFS from PVFS2 recently. The mount -t type remains pvfs2, so I have used that name throughout despite the kernel module being named orangefs. We've been maintaining this as a patch for quite some time. The easiest way to use is to setup a single server installation with multiple filesystems orangefs and scratch, put the following in /etc/xfsqa.config, and run ./check -pvfs2 -g quick. TEST_DIR=/mnt TEST_DEV=tcp://server1vm:3334/orangefs SCRATCH_MNT=/scratch SCRATCH_DEV=tcp://server1vm:3334/scratch Signed-off-by: Martin Brandenburg <martin@omnibond.com> --- check | 2 ++ common/attr | 4 +++- common/rc | 31 ++++++++++++++++++++++++++++++- 3 files changed, 35 insertions(+), 2 deletions(-)