Message ID | 1501761914-16445-1-git-send-email-yangx.jy@cn.fujitsu.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 8/3/17 7:05 AM, Xiao Yang wrote: > 1) When crc is not supported or disabled, this case could not indicate > any expected error. Running all tests without crc makes no sense. It's still fine to run the test. The description indicates that errors may be seen on crc filesystems, but there's nothing wrong with a test which iterates over "type" commands in xfs_db, even without crcs. It's possible that some other error could be found in the future. So perhaps the description should be updated; it does not "check for that false crc error," it simply checks that setting types causes /no/ error. > 2) When finobt is disabled, xfs_db fails to get current address of > free_root, as below: > xfs_db -c "agi" -c "addr free_root" -c "daddr" /dev/sda11 > Metadata CRC error detected at xfs_inobt block 0x0/0x1000 > ... I agree that the test should not be trying to set types that do not exist on the filesystem. But I think the right approach is to let the test run over whatever MKFS_OPTIONS have been specified, and be sure that the test can handle it properly, rather than forcing the test to run only with a certain set of options enabled. Thanks, -Eric > Running related tests without finobt makes no sense. > > We add check to fix it. > > Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> > --- > tests/xfs/424 | 16 ++++++++++++---- > 1 file changed, 12 insertions(+), 4 deletions(-) > > diff --git a/tests/xfs/424 b/tests/xfs/424 > index 0a1eef9..165c390 100755 > --- a/tests/xfs/424 > +++ b/tests/xfs/424 > @@ -55,9 +55,15 @@ rm -f $seqres.full > _supported_os Linux > _supported_fs xfs > _require_scratch > +_require_xfs_mkfs_crc > > echo "Silence is golden." > > +crc_finobt_enabled="crc=1,finobt=0" > + > +[ _scratch_mkfs_xfs_supported -m crc=1,finobt=1 >/dev/null 2>&1 ] && \ > + crc_finobt_enabled="crc=1,finobt=1" > + > # real QA test starts here > > # for different sector sizes, ensure no CRC errors are falsely reported. > @@ -77,7 +83,7 @@ while [ $sec_sz -le 4096 ]; do > done > > for SECTOR_SIZE in $sector_sizes; do > - $MKFS_XFS_PROG -f -s size=$SECTOR_SIZE $SCRATCH_DEV > /dev/null > + $MKFS_XFS_PROG -f -m "$crc_finobt_enabled" -s size=$SECTOR_SIZE $SCRATCH_DEV > /dev/null > > for TYPE in agf agi agfl sb; do > DADDR=`_scratch_xfs_db -c "$TYPE" -c "daddr" | filter_dbval` > @@ -96,9 +102,11 @@ for SECTOR_SIZE in $sector_sizes; do > DADDR=`_scratch_xfs_db -c "agi" -c "addr root" -c "daddr" | > filter_dbval` > _scratch_xfs_db -c "daddr $DADDR" -c "type inobt" > - DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | > - filter_dbval` > - _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" > + if [[ "$crc_finobt_enabled" =~ 'finobt=1' ]]; then > + DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | > + filter_dbval` > + _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" > + fi > > _scratch_xfs_db -c "daddr $DADDR" -c "type text" > _scratch_xfs_db -c "daddr $DADDR" -c "type data" > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2017/08/03 22:57, Eric Sandeen wrote: > On 8/3/17 7:05 AM, Xiao Yang wrote: >> 1) When crc is not supported or disabled, this case could not indicate >> any expected error. Running all tests without crc makes no sense. > It's still fine to run the test. The description indicates > that errors may be seen on crc filesystems, but there's nothing > wrong with a test which iterates over "type" commands in xfs_db, > even without crcs. It's possible that some other error could > be found in the future. > > So perhaps the description should be updated; it does not "check for > that false crc error," it simply checks that setting types causes > /no/ error. Hi Eric, Agreed. We can just update the description. > >> 2) When finobt is disabled, xfs_db fails to get current address of >> free_root, as below: >> xfs_db -c "agi" -c "addr free_root" -c "daddr" /dev/sda11 >> Metadata CRC error detected at xfs_inobt block 0x0/0x1000 >> ... > I agree that the test should not be trying to set types that do > not exist on the filesystem. > > But I think the right approach is to let the test run over whatever > MKFS_OPTIONS have been specified, and be sure that the test can handle > it properly, rather than forcing the test to run only with a certain > set of options enabled. OK, i will change the check for finobt as you suggested. Thanks a lot for your comments. Thanks, Xiao Yang. > Thanks, > -Eric > >> Running related tests without finobt makes no sense. >> >> We add check to fix it. >> >> Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> >> --- >> tests/xfs/424 | 16 ++++++++++++---- >> 1 file changed, 12 insertions(+), 4 deletions(-) >> >> diff --git a/tests/xfs/424 b/tests/xfs/424 >> index 0a1eef9..165c390 100755 >> --- a/tests/xfs/424 >> +++ b/tests/xfs/424 >> @@ -55,9 +55,15 @@ rm -f $seqres.full >> _supported_os Linux >> _supported_fs xfs >> _require_scratch >> +_require_xfs_mkfs_crc >> >> echo "Silence is golden." >> >> +crc_finobt_enabled="crc=1,finobt=0" >> + >> +[ _scratch_mkfs_xfs_supported -m crc=1,finobt=1>/dev/null 2>&1 ]&& \ >> + crc_finobt_enabled="crc=1,finobt=1" >> + >> # real QA test starts here >> >> # for different sector sizes, ensure no CRC errors are falsely reported. >> @@ -77,7 +83,7 @@ while [ $sec_sz -le 4096 ]; do >> done >> >> for SECTOR_SIZE in $sector_sizes; do >> - $MKFS_XFS_PROG -f -s size=$SECTOR_SIZE $SCRATCH_DEV> /dev/null >> + $MKFS_XFS_PROG -f -m "$crc_finobt_enabled" -s size=$SECTOR_SIZE $SCRATCH_DEV> /dev/null >> >> for TYPE in agf agi agfl sb; do >> DADDR=`_scratch_xfs_db -c "$TYPE" -c "daddr" | filter_dbval` >> @@ -96,9 +102,11 @@ for SECTOR_SIZE in $sector_sizes; do >> DADDR=`_scratch_xfs_db -c "agi" -c "addr root" -c "daddr" | >> filter_dbval` >> _scratch_xfs_db -c "daddr $DADDR" -c "type inobt" >> - DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | >> - filter_dbval` >> - _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" >> + if [[ "$crc_finobt_enabled" =~ 'finobt=1' ]]; then >> + DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | >> + filter_dbval` >> + _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" >> + fi >> >> _scratch_xfs_db -c "daddr $DADDR" -c "type text" >> _scratch_xfs_db -c "daddr $DADDR" -c "type data" >> > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > . > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eric, When finobt is disabled, xfs_db gets double crc errors on upstream xfsporgs-dev. as below(e.g. block size is 4096): ... xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 Metadata corruption detected at xfs_inobt block 0x10/0x1000 Metadata corruption detected at xfs_inobt block 0x10/0x1000 Is this expected behavor? Because xfs_db gets one crc error on v4.5 xfsprogs-dev. as below(e.g. block size is 4096): ... xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 Metadata CRC error detected at xfs_inobt block 0x10/0x200 Thanks, Xiao Yang. On 2017/08/03 22:57, Eric Sandeen wrote: > On 8/3/17 7:05 AM, Xiao Yang wrote: >> 1) When crc is not supported or disabled, this case could not indicate >> any expected error. Running all tests without crc makes no sense. > It's still fine to run the test. The description indicates > that errors may be seen on crc filesystems, but there's nothing > wrong with a test which iterates over "type" commands in xfs_db, > even without crcs. It's possible that some other error could > be found in the future. > > So perhaps the description should be updated; it does not "check for > that false crc error," it simply checks that setting types causes > /no/ error. > >> 2) When finobt is disabled, xfs_db fails to get current address of >> free_root, as below: >> xfs_db -c "agi" -c "addr free_root" -c "daddr" /dev/sda11 >> Metadata CRC error detected at xfs_inobt block 0x0/0x1000 >> ... > I agree that the test should not be trying to set types that do > not exist on the filesystem. > > But I think the right approach is to let the test run over whatever > MKFS_OPTIONS have been specified, and be sure that the test can handle > it properly, rather than forcing the test to run only with a certain > set of options enabled. > > Thanks, > -Eric > >> Running related tests without finobt makes no sense. >> >> We add check to fix it. >> >> Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> >> --- >> tests/xfs/424 | 16 ++++++++++++---- >> 1 file changed, 12 insertions(+), 4 deletions(-) >> >> diff --git a/tests/xfs/424 b/tests/xfs/424 >> index 0a1eef9..165c390 100755 >> --- a/tests/xfs/424 >> +++ b/tests/xfs/424 >> @@ -55,9 +55,15 @@ rm -f $seqres.full >> _supported_os Linux >> _supported_fs xfs >> _require_scratch >> +_require_xfs_mkfs_crc >> >> echo "Silence is golden." >> >> +crc_finobt_enabled="crc=1,finobt=0" >> + >> +[ _scratch_mkfs_xfs_supported -m crc=1,finobt=1>/dev/null 2>&1 ]&& \ >> + crc_finobt_enabled="crc=1,finobt=1" >> + >> # real QA test starts here >> >> # for different sector sizes, ensure no CRC errors are falsely reported. >> @@ -77,7 +83,7 @@ while [ $sec_sz -le 4096 ]; do >> done >> >> for SECTOR_SIZE in $sector_sizes; do >> - $MKFS_XFS_PROG -f -s size=$SECTOR_SIZE $SCRATCH_DEV> /dev/null >> + $MKFS_XFS_PROG -f -m "$crc_finobt_enabled" -s size=$SECTOR_SIZE $SCRATCH_DEV> /dev/null >> >> for TYPE in agf agi agfl sb; do >> DADDR=`_scratch_xfs_db -c "$TYPE" -c "daddr" | filter_dbval` >> @@ -96,9 +102,11 @@ for SECTOR_SIZE in $sector_sizes; do >> DADDR=`_scratch_xfs_db -c "agi" -c "addr root" -c "daddr" | >> filter_dbval` >> _scratch_xfs_db -c "daddr $DADDR" -c "type inobt" >> - DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | >> - filter_dbval` >> - _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" >> + if [[ "$crc_finobt_enabled" =~ 'finobt=1' ]]; then >> + DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | >> + filter_dbval` >> + _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" >> + fi >> >> _scratch_xfs_db -c "daddr $DADDR" -c "type text" >> _scratch_xfs_db -c "daddr $DADDR" -c "type data" >> > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > . > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8/4/17 2:20 AM, Xiao Yang wrote: > Hi Eric, > > When finobt is disabled, xfs_db gets double crc errors on upstream xfsporgs-dev. > as below(e.g. block size is 4096): > ... > xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 > Metadata corruption detected at xfs_inobt block 0x10/0x1000 > Metadata corruption detected at xfs_inobt block 0x10/0x1000 > > Is this expected behavor? Because xfs_db gets one crc error on v4.5 xfsprogs-dev. > as below(e.g. block size is 4096): > ... > xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 > Metadata CRC error detected at xfs_inobt block 0x10/0x200 So, errors is expected because you finobt is disabled, and you are asking it to print a not-finobt block as a finobt. I think the double printing is because upstream the code actually sets the cursor twice after the commit which tried to fix the type-setting, it's on my list to fix. Thanks, -Eric > Thanks, > Xiao Yang. -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2017/08/04 22:37, Eric Sandeen wrote: > On 8/4/17 2:20 AM, Xiao Yang wrote: >> Hi Eric, >> >> When finobt is disabled, xfs_db gets double crc errors on upstream xfsporgs-dev. >> as below(e.g. block size is 4096): >> ... >> xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 >> Metadata corruption detected at xfs_inobt block 0x10/0x1000 >> Metadata corruption detected at xfs_inobt block 0x10/0x1000 >> >> Is this expected behavor? Because xfs_db gets one crc error on v4.5 xfsprogs-dev. >> as below(e.g. block size is 4096): >> ... >> xfs_db -c "daddr 16" -c "type finobt" /dev/sda11 >> Metadata CRC error detected at xfs_inobt block 0x10/0x200 > So, errors is expected because you finobt is disabled, and you are asking > it to print a not-finobt block as a finobt. > > I think the double printing is because upstream the code actually sets > the cursor twice after the commit which tried to fix the type-setting, > it's on my list to fix. Hi Eric, Thanks for your detailed explanation, and i got it. Could you help me review the v2 patch. Thanks a lot! Thanks, Xiao Yang > Thanks, > -Eric > >> Thanks, >> Xiao Yang. > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/xfs/424 b/tests/xfs/424 index 0a1eef9..165c390 100755 --- a/tests/xfs/424 +++ b/tests/xfs/424 @@ -55,9 +55,15 @@ rm -f $seqres.full _supported_os Linux _supported_fs xfs _require_scratch +_require_xfs_mkfs_crc echo "Silence is golden." +crc_finobt_enabled="crc=1,finobt=0" + +[ _scratch_mkfs_xfs_supported -m crc=1,finobt=1 >/dev/null 2>&1 ] && \ + crc_finobt_enabled="crc=1,finobt=1" + # real QA test starts here # for different sector sizes, ensure no CRC errors are falsely reported. @@ -77,7 +83,7 @@ while [ $sec_sz -le 4096 ]; do done for SECTOR_SIZE in $sector_sizes; do - $MKFS_XFS_PROG -f -s size=$SECTOR_SIZE $SCRATCH_DEV > /dev/null + $MKFS_XFS_PROG -f -m "$crc_finobt_enabled" -s size=$SECTOR_SIZE $SCRATCH_DEV > /dev/null for TYPE in agf agi agfl sb; do DADDR=`_scratch_xfs_db -c "$TYPE" -c "daddr" | filter_dbval` @@ -96,9 +102,11 @@ for SECTOR_SIZE in $sector_sizes; do DADDR=`_scratch_xfs_db -c "agi" -c "addr root" -c "daddr" | filter_dbval` _scratch_xfs_db -c "daddr $DADDR" -c "type inobt" - DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | - filter_dbval` - _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" + if [[ "$crc_finobt_enabled" =~ 'finobt=1' ]]; then + DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | + filter_dbval` + _scratch_xfs_db -c "daddr $DADDR" -c "type finobt" + fi _scratch_xfs_db -c "daddr $DADDR" -c "type text" _scratch_xfs_db -c "daddr $DADDR" -c "type data"
1) When crc is not supported or disabled, this case could not indicate any expected error. Running all tests without crc makes no sense. 2) When finobt is disabled, xfs_db fails to get current address of free_root, as below: xfs_db -c "agi" -c "addr free_root" -c "daddr" /dev/sda11 Metadata CRC error detected at xfs_inobt block 0x0/0x1000 ... Running related tests without finobt makes no sense. We add check to fix it. Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> --- tests/xfs/424 | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)