| Message ID | 152182408130.14523.7755991950980642374.stgit@magnolia (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Mar 23, 2018 at 09:54:41AM -0700, Darrick J. Wong wrote: > From: Darrick J. Wong <darrick.wong@oracle.com> > > >From the kernel patch that this test examines ("xfs: detect agfl count > corruption and reset agfl"): > > "The struct xfs_agfl v5 header was originally introduced with > unexpected padding that caused the AGFL to operate with one less > slot than intended. The header has since been packed, but the fix > left an incompatibility for users who upgrade from an old kernel > with the unpacked header to a newer kernel with the packed header > while the AGFL happens to wrap around the end. The newer kernel > recognizes one extra slot at the physical end of the AGFL that the > previous kernel did not. The new kernel will eventually attempt to > allocate a block from that slot, which contains invalid data, and > cause a crash. > > "This condition can be detected by comparing the active range of the > AGFL to the count. While this detects a padding mismatch, it can > also trigger false positives for unrelated flcount corruption. Since > we cannot distinguish a size mismatch due to padding from unrelated > corruption, we can't trust the AGFL enough to simply repopulate the > empty slot. > > "Instead, avoid unnecessarily complex detection logic and and use a > solution that can handle any form of flcount corruption that slips > through read verifiers: distrust the entire AGFL and reset it to an > empty state. Any valid blocks within the AGFL are intentionally > leaked. This requires xfs_repair to rectify (which was already > necessary based on the state the AGFL was found in). The reset > mitigates the side effect of the padding mismatch problem from a > filesystem crash to a free space accounting inconsistency." > > This test exercises the reset code by mutating a fresh filesystem to > contain an agfl with various list configurations of correctly wrapped, > incorrectly wrapped, not wrapped, and actually corrupt free lists; then > checks the success of the reset operation by fragmenting the free space > btrees to exercise the agfl. Kernels without this reset fix will shut > down the filesystem with corruption errors. > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > --- Reviewed-by: Brian Foster <bfoster@redhat.com> > common/rc | 27 +++++- > tests/xfs/709 | 258 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/709.out | 13 +++ > tests/xfs/group | 1 > 4 files changed, 295 insertions(+), 4 deletions(-) > create mode 100755 tests/xfs/709 > create mode 100644 tests/xfs/709.out > > > diff --git a/common/rc b/common/rc > index 2c29d55..18a438a 100644 > --- a/common/rc > +++ b/common/rc > @@ -3440,6 +3440,28 @@ _get_device_size() > grep `_short_dev $1` /proc/partitions | awk '{print $3}' > } > > +# Make sure we actually have dmesg checking set up. > +_require_check_dmesg() { > + test -w /dev/kmsg || \ > + _notrun "Test requires writable /dev/kmsg." > +} > + > +# Return the dmesg log since the start of this test. Caller must ensure that > +# /dev/kmsg was writable when the test was started so that we can find the > +# beginning of this test's log messages; _require_check_dmesg does this. > +_dmesg_since_test_start() { > + # search the dmesg log of last run of $seqnum for possible failures > + # use sed \cregexpc address type, since $seqnum contains "/" > + dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ > + tac > +} > + > +# check dmesg log for a specific string, subject to the same requirements as > +# _dmesg_since_test_start. > +_check_dmesg_for() { > + _dmesg_since_test_start | egrep -q "$1" > +} > + > # check dmesg log for WARNING/Oops/etc. > _check_dmesg() > { > @@ -3453,10 +3475,7 @@ _check_dmesg() > # filter out intentional WARNINGs or Oopses > filter=${1:-cat} > > - # search the dmesg log of last run of $seqnum for possible failures > - # use sed \cregexpc address type, since $seqnum contains "/" > - dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ > - tac | $filter >$seqres.dmesg > + _dmesg_since_test_start | $filter >$seqres.dmesg > egrep -q -e "kernel BUG at" \ > -e "WARNING:" \ > -e "BUG:" \ > diff --git a/tests/xfs/709 b/tests/xfs/709 > new file mode 100755 > index 0000000..fa83039 > --- /dev/null > +++ b/tests/xfs/709 > @@ -0,0 +1,258 @@ > +#! /bin/bash > +# FS QA Test No. 709 > +# > +# Make sure XFS can fix a v5 AGFL that wraps over the last block. > +# Refer to commit 96f859d52bcb ("libxfs: pack the agfl header structure so > +# XFS_AGFL_SIZE is correct") for details on the original on-disk format error > +# and the patch "xfs: detect agfl count corruption and reset agfl") for details > +# about the fix. > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2018 Oracle, Inc. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +# > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 > +trap "_cleanup; rm -f $tmp.*; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +rm -f $seqres.full > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# real QA test starts here > +_supported_fs xfs > +_supported_os Linux > + > +_require_check_dmesg > +_require_scratch > +_require_test_program "punch-alternating" > + > +# This is only a v5 filesystem problem > +_require_scratch_xfs_crc > + > +mount_loop() { > + if ! _try_scratch_mount >> $seqres.full 2>&1; then > + echo "scratch mount failed" >> $seqres.full > + return > + fi > + > + # Trigger agfl fixing by fragmenting free space enough to cause > + # a bnobt split > + blksz=$(_get_file_block_size ${SCRATCH_MNT}) > + bno_maxrecs=$(( blksz / 8 )) > + filesz=$((bno_maxrecs * 3 * blksz)) > + rm -rf $SCRATCH_MNT/a > + $XFS_IO_PROG -f -c "falloc 0 $filesz" $SCRATCH_MNT/a >> $seqres.full 2>&1 > + test -e $SCRATCH_MNT/a && ./src/punch-alternating $SCRATCH_MNT/a > + rm -rf $SCRATCH_MNT/a > + > + _scratch_unmount 2>&1 | _filter_scratch > +} > + > +dump_ag0() { > + _scratch_xfs_db -c 'sb 0' -c 'p' -c 'agf 0' -c 'p' -c 'agfl 0' -c 'p' > +} > + > +runtest() { > + cmd="$1" > + > + # Format filesystem > + echo "TEST $cmd" | tee /dev/ttyprintk > + echo "TEST $cmd" >> $seqres.full > + _scratch_mkfs >> $seqres.full > + > + # Record what was here before > + echo "FS BEFORE" >> $seqres.full > + dump_ag0 > $tmp.before > + cat $tmp.before >> $seqres.full > + > + sectsize=$(_scratch_xfs_get_metadata_field "sectsize" "sb 0") > + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0") > + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0") > + flcount=$(_scratch_xfs_get_metadata_field "flcount" "agf 0") > + > + # Due to a padding bug in the original v5 struct xfs_agfl, > + # XFS_AGFL_SIZE could be 36 on 32-bit or 40 on 64-bit. On a system > + # with 512b sectors, this means that the AGFL length could be > + # ((512 - 36) / 4) = 119 entries on 32-bit or ((512 - 40) / 4) = 118 > + # entries on 64-bit. > + # > + # We now have code to figure out if the AGFL list wraps incorrectly > + # according to the kernel's agfl size and fix it by resetting the agfl > + # to zero length. Mutate ag 0's agfl to be in various configurations > + # and see if we can trigger the reset. > + # > + # Don't hardcode the numbers, calculate them. > + > + # Have to have at least three agfl items to test full wrap > + test "$flcount" -ge 3 || _notrun "insufficient agfl flcount" > + > + # mkfs should be able to make us a nice neat flfirst < fllast setup > + test "$flfirst" -lt "$fllast" || _notrun "fresh agfl already wrapped?" > + > + bad_agfl_size=$(( (sectsize - 40) / 4 )) > + good_agfl_size=$(( (sectsize - 36) / 4 )) > + agfl_size= > + case "$1" in > + "fix_end") # fllast points to the end w/ 40-byte padding > + new_flfirst=$(( bad_agfl_size - flcount )) > + agfl_size=$bad_agfl_size;; > + "fix_start") # flfirst points to the end w/ 40-byte padding > + new_flfirst=$(( bad_agfl_size - 1)) > + agfl_size=$bad_agfl_size;; > + "fix_wrap") # list wraps around end w/ 40-byte padding > + new_flfirst=$(( bad_agfl_size - (flcount / 2) )) > + agfl_size=$bad_agfl_size;; > + "start_zero") # flfirst points to the start > + new_flfirst=0 > + agfl_size=$good_agfl_size;; > + "good_end") # fllast points to the end w/ 36-byte padding > + new_flfirst=$(( good_agfl_size - flcount )) > + agfl_size=$good_agfl_size;; > + "good_start") # flfirst points to the end w/ 36-byte padding > + new_flfirst=$(( good_agfl_size - 1 )) > + agfl_size=$good_agfl_size;; > + "good_wrap") # list wraps around end w/ 36-byte padding > + new_flfirst=$(( good_agfl_size - (flcount / 2) )) > + agfl_size=$good_agfl_size;; > + "bad_start") # flfirst points off the end > + new_flfirst=$good_agfl_size > + agfl_size=$good_agfl_size;; > + "no_move") # whatever mkfs formats (flfirst points to start) > + new_flfirst=$flfirst > + agfl_size=$good_agfl_size;; > + "simple_move") # move list arbitrarily > + new_flfirst=$((fllast + 1)) > + agfl_size=$good_agfl_size;; > + *) > + _fail "Internal test error";; > + esac > + new_fllast=$(( (new_flfirst + flcount - 1) % agfl_size )) > + > + # Log what we're doing... > + cat >> $seqres.full << ENDL > +sector size: $sectsize > +bad_agfl_size: $bad_agfl_size [0 - $((bad_agfl_size - 1))] > +good_agfl_size: $good_agfl_size [0 - $((good_agfl_size - 1))] > +agfl_size: $agfl_size > +flfirst: $flfirst > +fllast: $fllast > +flcount: $flcount > +new_flfirst: $new_flfirst > +new_fllast: $new_fllast > +ENDL > + > + # Remap the agfl blocks > + echo "$((good_agfl_size - 1)) 0xffffffff" > $tmp.remap > + seq "$flfirst" "$fllast" | while read f; do > + list_pos=$((f - flfirst)) > + dest_pos=$(( (new_flfirst + list_pos) % agfl_size )) > + bno=$(_scratch_xfs_get_metadata_field "bno[$f]" "agfl 0") > + echo "$dest_pos $bno" >> $tmp.remap > + done > + > + cat $tmp.remap | while read dest_pos bno junk; do > + _scratch_xfs_set_metadata_field "bno[$dest_pos]" "$bno" \ > + "agfl 0" >> $seqres.full > + done > + > + # Set new flfirst/fllast > + _scratch_xfs_set_metadata_field "fllast" "$new_fllast" \ > + "agf 0" >> $seqres.full > + _scratch_xfs_set_metadata_field "flfirst" "$new_flfirst" \ > + "agf 0" >> $seqres.full > + > + echo "FS AFTER" >> $seqres.full > + dump_ag0 > $tmp.corrupt 2> /dev/null > + diff -u $tmp.before $tmp.corrupt >> $seqres.full > + > + # Mount and see what happens > + mount_loop > + > + # Did we end up with a non-wrapped list? > + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0" 2>/dev/null) > + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0" 2>/dev/null) > + echo "flfirst=${flfirst} fllast=${fllast}" >> $seqres.full > + if [ "${flfirst}" -ge "$((good_agfl_size - 1))" ]; then > + echo "ASSERT flfirst < good_agfl_size - 1" | tee -a $seqres.full > + fi > + if [ "${fllast}" -ge "$((good_agfl_size - 1))" ]; then > + echo "ASSERT fllast < good_agfl_size - 1" | tee -a $seqres.full > + fi > + if [ "${flfirst}" -ge "${fllast}" ]; then > + echo "ASSERT flfirst < fllast" | tee -a $seqres.full > + fi > + > + echo "FS MOUNTLOOP" >> $seqres.full > + dump_ag0 > $tmp.mountloop 2> /dev/null > + diff -u $tmp.corrupt $tmp.mountloop >> $seqres.full > + > + # Let's see what repair thinks > + echo "REPAIR" >> $seqres.full > + _scratch_xfs_repair >> $seqres.full 2>&1 > + > + echo "FS REPAIR" >> $seqres.full > + dump_ag0 > $tmp.repair 2> /dev/null > + diff -u $tmp.mountloop $tmp.repair >> $seqres.full > + > + # Exercise the filesystem again to make sure there aren't any lasting > + # ill effects from either the agfl reset or the recommended subsequent > + # repair run. > + mount_loop > + > + echo "FS REMOUNT" >> $seqres.full > + dump_ag0 > $tmp.remount 2> /dev/null > + diff -u $tmp.repair $tmp.remount >> $seqres.full > +} > + > +runtest fix_end > +runtest fix_start > +runtest fix_wrap > +runtest start_zero > +runtest good_end > +runtest good_start > +runtest good_wrap > +runtest bad_start > +runtest no_move > +runtest simple_move > + > +# Did we get the kernel warning too? > +warn_str='WARNING: Reset corrupted AGFL' > +_check_dmesg_for "${warn_str}" || echo "Missing dmesg string \"${warn_str}\"." > + > +# Now run the regular dmesg check, filtering out the agfl warning > +filter_agfl_reset_printk() { > + grep -v "${warn_str}" > +} > +_check_dmesg filter_agfl_reset_printk > + > +status=0 > +exit 0 > diff --git a/tests/xfs/709.out b/tests/xfs/709.out > new file mode 100644 > index 0000000..f1fa9a3 > --- /dev/null > +++ b/tests/xfs/709.out > @@ -0,0 +1,13 @@ > +QA output created by 709 > +TEST fix_end > +TEST fix_start > +TEST fix_wrap > +TEST start_zero > +TEST good_end > +TEST good_start > +TEST good_wrap > +TEST bad_start > +ASSERT flfirst < good_agfl_size - 1 > +ASSERT flfirst < fllast > +TEST no_move > +TEST simple_move > diff --git a/tests/xfs/group b/tests/xfs/group > index e2397fe..472120e 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -441,3 +441,4 @@ > 441 auto quick clone quota > 442 auto stress clone quota > 443 auto quick ioctl fsr > +709 auto quick > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/rc b/common/rc index 2c29d55..18a438a 100644 --- a/common/rc +++ b/common/rc @@ -3440,6 +3440,28 @@ _get_device_size() grep `_short_dev $1` /proc/partitions | awk '{print $3}' } +# Make sure we actually have dmesg checking set up. +_require_check_dmesg() { + test -w /dev/kmsg || \ + _notrun "Test requires writable /dev/kmsg." +} + +# Return the dmesg log since the start of this test. Caller must ensure that +# /dev/kmsg was writable when the test was started so that we can find the +# beginning of this test's log messages; _require_check_dmesg does this. +_dmesg_since_test_start() { + # search the dmesg log of last run of $seqnum for possible failures + # use sed \cregexpc address type, since $seqnum contains "/" + dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ + tac +} + +# check dmesg log for a specific string, subject to the same requirements as +# _dmesg_since_test_start. +_check_dmesg_for() { + _dmesg_since_test_start | egrep -q "$1" +} + # check dmesg log for WARNING/Oops/etc. _check_dmesg() { @@ -3453,10 +3475,7 @@ _check_dmesg() # filter out intentional WARNINGs or Oopses filter=${1:-cat} - # search the dmesg log of last run of $seqnum for possible failures - # use sed \cregexpc address type, since $seqnum contains "/" - dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | \ - tac | $filter >$seqres.dmesg + _dmesg_since_test_start | $filter >$seqres.dmesg egrep -q -e "kernel BUG at" \ -e "WARNING:" \ -e "BUG:" \ diff --git a/tests/xfs/709 b/tests/xfs/709 new file mode 100755 index 0000000..fa83039 --- /dev/null +++ b/tests/xfs/709 @@ -0,0 +1,258 @@ +#! /bin/bash +# FS QA Test No. 709 +# +# Make sure XFS can fix a v5 AGFL that wraps over the last block. +# Refer to commit 96f859d52bcb ("libxfs: pack the agfl header structure so +# XFS_AGFL_SIZE is correct") for details on the original on-disk format error +# and the patch "xfs: detect agfl count corruption and reset agfl") for details +# about the fix. +# +#----------------------------------------------------------------------- +# Copyright (c) 2018 Oracle, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 +trap "_cleanup; rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +rm -f $seqres.full + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs xfs +_supported_os Linux + +_require_check_dmesg +_require_scratch +_require_test_program "punch-alternating" + +# This is only a v5 filesystem problem +_require_scratch_xfs_crc + +mount_loop() { + if ! _try_scratch_mount >> $seqres.full 2>&1; then + echo "scratch mount failed" >> $seqres.full + return + fi + + # Trigger agfl fixing by fragmenting free space enough to cause + # a bnobt split + blksz=$(_get_file_block_size ${SCRATCH_MNT}) + bno_maxrecs=$(( blksz / 8 )) + filesz=$((bno_maxrecs * 3 * blksz)) + rm -rf $SCRATCH_MNT/a + $XFS_IO_PROG -f -c "falloc 0 $filesz" $SCRATCH_MNT/a >> $seqres.full 2>&1 + test -e $SCRATCH_MNT/a && ./src/punch-alternating $SCRATCH_MNT/a + rm -rf $SCRATCH_MNT/a + + _scratch_unmount 2>&1 | _filter_scratch +} + +dump_ag0() { + _scratch_xfs_db -c 'sb 0' -c 'p' -c 'agf 0' -c 'p' -c 'agfl 0' -c 'p' +} + +runtest() { + cmd="$1" + + # Format filesystem + echo "TEST $cmd" | tee /dev/ttyprintk + echo "TEST $cmd" >> $seqres.full + _scratch_mkfs >> $seqres.full + + # Record what was here before + echo "FS BEFORE" >> $seqres.full + dump_ag0 > $tmp.before + cat $tmp.before >> $seqres.full + + sectsize=$(_scratch_xfs_get_metadata_field "sectsize" "sb 0") + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0") + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0") + flcount=$(_scratch_xfs_get_metadata_field "flcount" "agf 0") + + # Due to a padding bug in the original v5 struct xfs_agfl, + # XFS_AGFL_SIZE could be 36 on 32-bit or 40 on 64-bit. On a system + # with 512b sectors, this means that the AGFL length could be + # ((512 - 36) / 4) = 119 entries on 32-bit or ((512 - 40) / 4) = 118 + # entries on 64-bit. + # + # We now have code to figure out if the AGFL list wraps incorrectly + # according to the kernel's agfl size and fix it by resetting the agfl + # to zero length. Mutate ag 0's agfl to be in various configurations + # and see if we can trigger the reset. + # + # Don't hardcode the numbers, calculate them. + + # Have to have at least three agfl items to test full wrap + test "$flcount" -ge 3 || _notrun "insufficient agfl flcount" + + # mkfs should be able to make us a nice neat flfirst < fllast setup + test "$flfirst" -lt "$fllast" || _notrun "fresh agfl already wrapped?" + + bad_agfl_size=$(( (sectsize - 40) / 4 )) + good_agfl_size=$(( (sectsize - 36) / 4 )) + agfl_size= + case "$1" in + "fix_end") # fllast points to the end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - flcount )) + agfl_size=$bad_agfl_size;; + "fix_start") # flfirst points to the end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - 1)) + agfl_size=$bad_agfl_size;; + "fix_wrap") # list wraps around end w/ 40-byte padding + new_flfirst=$(( bad_agfl_size - (flcount / 2) )) + agfl_size=$bad_agfl_size;; + "start_zero") # flfirst points to the start + new_flfirst=0 + agfl_size=$good_agfl_size;; + "good_end") # fllast points to the end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - flcount )) + agfl_size=$good_agfl_size;; + "good_start") # flfirst points to the end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - 1 )) + agfl_size=$good_agfl_size;; + "good_wrap") # list wraps around end w/ 36-byte padding + new_flfirst=$(( good_agfl_size - (flcount / 2) )) + agfl_size=$good_agfl_size;; + "bad_start") # flfirst points off the end + new_flfirst=$good_agfl_size + agfl_size=$good_agfl_size;; + "no_move") # whatever mkfs formats (flfirst points to start) + new_flfirst=$flfirst + agfl_size=$good_agfl_size;; + "simple_move") # move list arbitrarily + new_flfirst=$((fllast + 1)) + agfl_size=$good_agfl_size;; + *) + _fail "Internal test error";; + esac + new_fllast=$(( (new_flfirst + flcount - 1) % agfl_size )) + + # Log what we're doing... + cat >> $seqres.full << ENDL +sector size: $sectsize +bad_agfl_size: $bad_agfl_size [0 - $((bad_agfl_size - 1))] +good_agfl_size: $good_agfl_size [0 - $((good_agfl_size - 1))] +agfl_size: $agfl_size +flfirst: $flfirst +fllast: $fllast +flcount: $flcount +new_flfirst: $new_flfirst +new_fllast: $new_fllast +ENDL + + # Remap the agfl blocks + echo "$((good_agfl_size - 1)) 0xffffffff" > $tmp.remap + seq "$flfirst" "$fllast" | while read f; do + list_pos=$((f - flfirst)) + dest_pos=$(( (new_flfirst + list_pos) % agfl_size )) + bno=$(_scratch_xfs_get_metadata_field "bno[$f]" "agfl 0") + echo "$dest_pos $bno" >> $tmp.remap + done + + cat $tmp.remap | while read dest_pos bno junk; do + _scratch_xfs_set_metadata_field "bno[$dest_pos]" "$bno" \ + "agfl 0" >> $seqres.full + done + + # Set new flfirst/fllast + _scratch_xfs_set_metadata_field "fllast" "$new_fllast" \ + "agf 0" >> $seqres.full + _scratch_xfs_set_metadata_field "flfirst" "$new_flfirst" \ + "agf 0" >> $seqres.full + + echo "FS AFTER" >> $seqres.full + dump_ag0 > $tmp.corrupt 2> /dev/null + diff -u $tmp.before $tmp.corrupt >> $seqres.full + + # Mount and see what happens + mount_loop + + # Did we end up with a non-wrapped list? + flfirst=$(_scratch_xfs_get_metadata_field "flfirst" "agf 0" 2>/dev/null) + fllast=$(_scratch_xfs_get_metadata_field "fllast" "agf 0" 2>/dev/null) + echo "flfirst=${flfirst} fllast=${fllast}" >> $seqres.full + if [ "${flfirst}" -ge "$((good_agfl_size - 1))" ]; then + echo "ASSERT flfirst < good_agfl_size - 1" | tee -a $seqres.full + fi + if [ "${fllast}" -ge "$((good_agfl_size - 1))" ]; then + echo "ASSERT fllast < good_agfl_size - 1" | tee -a $seqres.full + fi + if [ "${flfirst}" -ge "${fllast}" ]; then + echo "ASSERT flfirst < fllast" | tee -a $seqres.full + fi + + echo "FS MOUNTLOOP" >> $seqres.full + dump_ag0 > $tmp.mountloop 2> /dev/null + diff -u $tmp.corrupt $tmp.mountloop >> $seqres.full + + # Let's see what repair thinks + echo "REPAIR" >> $seqres.full + _scratch_xfs_repair >> $seqres.full 2>&1 + + echo "FS REPAIR" >> $seqres.full + dump_ag0 > $tmp.repair 2> /dev/null + diff -u $tmp.mountloop $tmp.repair >> $seqres.full + + # Exercise the filesystem again to make sure there aren't any lasting + # ill effects from either the agfl reset or the recommended subsequent + # repair run. + mount_loop + + echo "FS REMOUNT" >> $seqres.full + dump_ag0 > $tmp.remount 2> /dev/null + diff -u $tmp.repair $tmp.remount >> $seqres.full +} + +runtest fix_end +runtest fix_start +runtest fix_wrap +runtest start_zero +runtest good_end +runtest good_start +runtest good_wrap +runtest bad_start +runtest no_move +runtest simple_move + +# Did we get the kernel warning too? +warn_str='WARNING: Reset corrupted AGFL' +_check_dmesg_for "${warn_str}" || echo "Missing dmesg string \"${warn_str}\"." + +# Now run the regular dmesg check, filtering out the agfl warning +filter_agfl_reset_printk() { + grep -v "${warn_str}" +} +_check_dmesg filter_agfl_reset_printk + +status=0 +exit 0 diff --git a/tests/xfs/709.out b/tests/xfs/709.out new file mode 100644 index 0000000..f1fa9a3 --- /dev/null +++ b/tests/xfs/709.out @@ -0,0 +1,13 @@ +QA output created by 709 +TEST fix_end +TEST fix_start +TEST fix_wrap +TEST start_zero +TEST good_end +TEST good_start +TEST good_wrap +TEST bad_start +ASSERT flfirst < good_agfl_size - 1 +ASSERT flfirst < fllast +TEST no_move +TEST simple_move diff --git a/tests/xfs/group b/tests/xfs/group index e2397fe..472120e 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -441,3 +441,4 @@ 441 auto quick clone quota 442 auto stress clone quota 443 auto quick ioctl fsr +709 auto quick