| Message ID | 154877864538.9277.6249607598508212314.stgit@magnolia (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] xfs/093: make sure the scratch directory still exists after repair | expand |
On Tue, Jan 29, 2019 at 08:17:25AM -0800, Darrick J. Wong wrote: > From: Darrick J. Wong <darrick.wong@oracle.com> > > Refactor the kmemleak code to work correctly with sections. This Thanks for the fix! > requires changing the report location to use RESULT_DIR instead of > RESULT_BASE, and clarifying which functions get used when. But I didn't see any RESULT_DIR related changes in this patch. > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > --- > check | 4 ++-- > common/rc | 32 ++++++++++++++++++++++---------- > 2 files changed, 24 insertions(+), 12 deletions(-) > > > diff --git a/check b/check > index c0eee0aa..b9eb86cb 100755 > --- a/check > +++ b/check > @@ -509,7 +509,7 @@ _expunge_test() > return 0 > } > > -_init_kmemleak > +_detect_kmemleak > _prepare_test_list > > if $OPTIONS_HAVE_SECTIONS; then > @@ -793,8 +793,8 @@ for section in $HOST_OPTIONS_SECTIONS; do > # and log messages that shouldn't be there. > _check_filesystems > _check_dmesg || err=true > - _check_kmemleak || err=true > fi > + _check_kmemleak || err=true So we check for kmemleak after each test even when the test already failed, better to have some comments here to explain why this is necessary. > > # test ends after all checks are done. > $timestamp && _timestamp > diff --git a/common/rc b/common/rc > index 19e947df..75771f31 100644 > --- a/common/rc > +++ b/common/rc > @@ -3514,7 +3514,7 @@ _check_dmesg() > # capture the kmemleak report > _capture_kmemleak() > { > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > + local kern_knob="$DEBUGFS_MNT/kmemleak" Just wondering why the "{}" are removed in this patch? > local leak_file="$1" > > # Tell the kernel to scan for memory leaks. Apparently the write > @@ -3535,17 +3535,20 @@ ENDL > echo "clear" > "$kern_knob" > } > > -# set up kmemleak > -_init_kmemleak() > +# Figure out if the running kernel supports kmemleak; if it does, clear out > +# anything that leaked before we even started testing. The leak checker only > +# needs to be primed like this once per ./check invocation. > +_detect_kmemleak() > { > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > + local kern_knob="$DEBUGFS_MNT/kmemleak" > + KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak" So we're checking the "/tmp/check_kmemleak" file instead of ${RESULT_BASE}/check_kmemleak now, but from the commit log it seems that it should be ${RESULT_DIR}/check_kmemleak? > > # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is > # disabled, but returns EBUSY on write. So instead of relying on > # existance of writable knob file, we use a test file to indicate that > # _check_kmemleak() is enabled only if we actually managed to write to > # the knob file. > - rm -f ${RESULT_BASE}/check_kmemleak > + rm -f "$KMEMLEAK_CHECK_FILE" > > if [ ! -w "$kern_knob" ]; then > return 0 > @@ -3555,17 +3558,26 @@ _init_kmemleak() > # then dump all the leaks recorded so far. > if echo "scan=off" > "$kern_knob" 2>/dev/null; then > _capture_kmemleak /dev/null > - touch ${RESULT_BASE}/check_kmemleak > + touch "$KMEMLEAK_CHECK_FILE" > fi > } > > -# check kmemleak log > +# Kick the kmemleak checker to scan for leaks. Background leak scan mode is > +# not enabled, so we must call the kernel to ask for a scan and deal with the > +# results appropriately. This we do after every test completes, whether or not > +# it was successful. > _check_kmemleak() > { > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > - local leak_file="${seqres}.kmemleak" > + local kern_knob="$DEBUGFS_MNT/kmemleak" > + local leak_file="$seqres.kmemleak" > > - if [ ! -f ${RESULT_BASE}/check_kmemleak ]; then > + if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then > + return 0 > + fi > + > + # Not enabled, so discard any report of leaks found. > + if [ "$USE_KMEMLEAK" != "yes" ]; then > + _capture_kmemleak /dev/null New knob requires new documentation in README :) Thanks, Eryu > return 0 > fi > >
On Sun, Feb 03, 2019 at 05:10:49PM +0800, Eryu Guan wrote: > On Tue, Jan 29, 2019 at 08:17:25AM -0800, Darrick J. Wong wrote: > > From: Darrick J. Wong <darrick.wong@oracle.com> > > > > Refactor the kmemleak code to work correctly with sections. This > > Thanks for the fix! > > > requires changing the report location to use RESULT_DIR instead of > > RESULT_BASE, and clarifying which functions get used when. > > But I didn't see any RESULT_DIR related changes in this patch. I forgot to update the commit log. :( > > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > > --- > > check | 4 ++-- > > common/rc | 32 ++++++++++++++++++++++---------- > > 2 files changed, 24 insertions(+), 12 deletions(-) > > > > > > diff --git a/check b/check > > index c0eee0aa..b9eb86cb 100755 > > --- a/check > > +++ b/check > > @@ -509,7 +509,7 @@ _expunge_test() > > return 0 > > } > > > > -_init_kmemleak > > +_detect_kmemleak > > _prepare_test_list > > > > if $OPTIONS_HAVE_SECTIONS; then > > @@ -793,8 +793,8 @@ for section in $HOST_OPTIONS_SECTIONS; do > > # and log messages that shouldn't be there. > > _check_filesystems > > _check_dmesg || err=true > > - _check_kmemleak || err=true > > fi > > + _check_kmemleak || err=true > > So we check for kmemleak after each test even when the test already > failed, better to have some comments here to explain why this is > necessary. I'll add this in the next version: # Scan for memory leaks after every test so that associating # a leak to a particular test will be as accurate as possible. > > > > # test ends after all checks are done. > > $timestamp && _timestamp > > diff --git a/common/rc b/common/rc > > index 19e947df..75771f31 100644 > > --- a/common/rc > > +++ b/common/rc > > @@ -3514,7 +3514,7 @@ _check_dmesg() > > # capture the kmemleak report > > _capture_kmemleak() > > { > > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > > + local kern_knob="$DEBUGFS_MNT/kmemleak" > > Just wondering why the "{}" are removed in this patch? Making the variable dereferencing consistent with the rest of fstests. > > local leak_file="$1" > > > > # Tell the kernel to scan for memory leaks. Apparently the write > > @@ -3535,17 +3535,20 @@ ENDL > > echo "clear" > "$kern_knob" > > } > > > > -# set up kmemleak > > -_init_kmemleak() > > +# Figure out if the running kernel supports kmemleak; if it does, clear out > > +# anything that leaked before we even started testing. The leak checker only > > +# needs to be primed like this once per ./check invocation. > > +_detect_kmemleak() > > { > > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > > + local kern_knob="$DEBUGFS_MNT/kmemleak" > > + KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak" > > So we're checking the "/tmp/check_kmemleak" file instead of Right. > ${RESULT_BASE}/check_kmemleak now, but from the commit log it seems that > it should be ${RESULT_DIR}/check_kmemleak? Er... oops. I'll update the changelog. :) > > > > # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is > > # disabled, but returns EBUSY on write. So instead of relying on > > # existance of writable knob file, we use a test file to indicate that > > # _check_kmemleak() is enabled only if we actually managed to write to > > # the knob file. > > - rm -f ${RESULT_BASE}/check_kmemleak > > + rm -f "$KMEMLEAK_CHECK_FILE" > > > > if [ ! -w "$kern_knob" ]; then > > return 0 > > @@ -3555,17 +3558,26 @@ _init_kmemleak() > > # then dump all the leaks recorded so far. > > if echo "scan=off" > "$kern_knob" 2>/dev/null; then > > _capture_kmemleak /dev/null > > - touch ${RESULT_BASE}/check_kmemleak > > + touch "$KMEMLEAK_CHECK_FILE" > > fi > > } > > > > -# check kmemleak log > > +# Kick the kmemleak checker to scan for leaks. Background leak scan mode is > > +# not enabled, so we must call the kernel to ask for a scan and deal with the > > +# results appropriately. This we do after every test completes, whether or not > > +# it was successful. > > _check_kmemleak() > > { > > - local kern_knob="${DEBUGFS_MNT}/kmemleak" > > - local leak_file="${seqres}.kmemleak" > > + local kern_knob="$DEBUGFS_MNT/kmemleak" > > + local leak_file="$seqres.kmemleak" > > > > - if [ ! -f ${RESULT_BASE}/check_kmemleak ]; then > > + if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then > > + return 0 > > + fi > > + > > + # Not enabled, so discard any report of leaks found. > > + if [ "$USE_KMEMLEAK" != "yes" ]; then > > + _capture_kmemleak /dev/null > > New knob requires new documentation in README :) Will do. Happy New Year, by the way! --D > Thanks, > Eryu > > > return 0 > > fi > > > >
diff --git a/check b/check index c0eee0aa..b9eb86cb 100755 --- a/check +++ b/check @@ -509,7 +509,7 @@ _expunge_test() return 0 } -_init_kmemleak +_detect_kmemleak _prepare_test_list if $OPTIONS_HAVE_SECTIONS; then @@ -793,8 +793,8 @@ for section in $HOST_OPTIONS_SECTIONS; do # and log messages that shouldn't be there. _check_filesystems _check_dmesg || err=true - _check_kmemleak || err=true fi + _check_kmemleak || err=true # test ends after all checks are done. $timestamp && _timestamp diff --git a/common/rc b/common/rc index 19e947df..75771f31 100644 --- a/common/rc +++ b/common/rc @@ -3514,7 +3514,7 @@ _check_dmesg() # capture the kmemleak report _capture_kmemleak() { - local kern_knob="${DEBUGFS_MNT}/kmemleak" + local kern_knob="$DEBUGFS_MNT/kmemleak" local leak_file="$1" # Tell the kernel to scan for memory leaks. Apparently the write @@ -3535,17 +3535,20 @@ ENDL echo "clear" > "$kern_knob" } -# set up kmemleak -_init_kmemleak() +# Figure out if the running kernel supports kmemleak; if it does, clear out +# anything that leaked before we even started testing. The leak checker only +# needs to be primed like this once per ./check invocation. +_detect_kmemleak() { - local kern_knob="${DEBUGFS_MNT}/kmemleak" + local kern_knob="$DEBUGFS_MNT/kmemleak" + KMEMLEAK_CHECK_FILE="/tmp/check_kmemleak" # Since kernel v4.19-rc3, the kmemleak knob exists even if kmemleak is # disabled, but returns EBUSY on write. So instead of relying on # existance of writable knob file, we use a test file to indicate that # _check_kmemleak() is enabled only if we actually managed to write to # the knob file. - rm -f ${RESULT_BASE}/check_kmemleak + rm -f "$KMEMLEAK_CHECK_FILE" if [ ! -w "$kern_knob" ]; then return 0 @@ -3555,17 +3558,26 @@ _init_kmemleak() # then dump all the leaks recorded so far. if echo "scan=off" > "$kern_knob" 2>/dev/null; then _capture_kmemleak /dev/null - touch ${RESULT_BASE}/check_kmemleak + touch "$KMEMLEAK_CHECK_FILE" fi } -# check kmemleak log +# Kick the kmemleak checker to scan for leaks. Background leak scan mode is +# not enabled, so we must call the kernel to ask for a scan and deal with the +# results appropriately. This we do after every test completes, whether or not +# it was successful. _check_kmemleak() { - local kern_knob="${DEBUGFS_MNT}/kmemleak" - local leak_file="${seqres}.kmemleak" + local kern_knob="$DEBUGFS_MNT/kmemleak" + local leak_file="$seqres.kmemleak" - if [ ! -f ${RESULT_BASE}/check_kmemleak ]; then + if [ ! -f "$KMEMLEAK_CHECK_FILE" ]; then + return 0 + fi + + # Not enabled, so discard any report of leaks found. + if [ "$USE_KMEMLEAK" != "yes" ]; then + _capture_kmemleak /dev/null return 0 fi