diff mbox series

[4/4] xfs: test upgrading filesystem to bigtime

Message ID 161896460627.776452.15178871770338402214.stgit@magnolia (mailing list archive)
State New
Headers show
Series fstests: widen timestamps to deal with y2038+ | expand

Commit Message

Darrick J. Wong April 21, 2021, 12:23 a.m. UTC
From: Darrick J. Wong <djwong@kernel.org>

Test that we can upgrade an existing filesystem to use bigtime.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
 common/xfs        |   16 ++++++
 tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/908.out |   29 ++++++++++
 tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/909.out |    6 ++
 tests/xfs/group   |    2 +
 6 files changed, 319 insertions(+)
 create mode 100755 tests/xfs/908
 create mode 100644 tests/xfs/908.out
 create mode 100755 tests/xfs/909
 create mode 100644 tests/xfs/909.out

Comments

Amir Goldstein April 21, 2021, 6:18 a.m. UTC | #1
On Wed, Apr 21, 2021 at 3:23 AM Darrick J. Wong <djwong@kernel.org> wrote:
>
> From: Darrick J. Wong <djwong@kernel.org>
>
> Test that we can upgrade an existing filesystem to use bigtime.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
>  common/xfs        |   16 ++++++
>  tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/908.out |   29 ++++++++++
>  tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/909.out |    6 ++
>  tests/xfs/group   |    2 +
>  6 files changed, 319 insertions(+)
>  create mode 100755 tests/xfs/908
>  create mode 100644 tests/xfs/908.out
>  create mode 100755 tests/xfs/909
>  create mode 100644 tests/xfs/909.out
>
>
> diff --git a/common/xfs b/common/xfs
> index cb6a1978..253a31e5 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -1184,3 +1184,19 @@ _xfs_timestamp_range()
>                         awk '{printf("%s %s", $1, $2);}'
>         fi
>  }
> +
> +# Require that the scratch device exists, that mkfs can format with bigtime
> +# enabled, that the kernel can mount such a filesystem, and that xfs_info
> +# advertises the presence of that feature.
> +_require_scratch_xfs_bigtime()
> +{
> +       _require_scratch
> +
> +       _scratch_mkfs -m bigtime=1 &>/dev/null || \
> +               _notrun "mkfs.xfs doesn't support bigtime feature"
> +       _try_scratch_mount || \
> +               _notrun "kernel doesn't support xfs bigtime feature"
> +       $XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
> +               _notrun "bigtime feature not advertised on mount?"
> +       _scratch_unmount
> +}
> diff --git a/tests/xfs/908 b/tests/xfs/908
> new file mode 100755
> index 00000000..004a8563
> --- /dev/null
> +++ b/tests/xfs/908
> @@ -0,0 +1,117 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 908
> +#
> +# Check that we can upgrade a filesystem to support bigtime and that inode
> +# timestamps work properly after the upgrade.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +       cd /
> +       rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +_require_scratch_xfs_bigtime
> +_require_xfs_repair_upgrade bigtime
> +
> +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> +       _notrun "Userspace does not support dates past 2038."
> +
> +rm -f $seqres.full
> +
> +# Make sure we can't upgrade a V4 filesystem
> +_scratch_mkfs -m crc=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +
> +# Make sure we're required to specify a feature status
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime 2>> $seqres.full
> +
> +# Can we add bigtime and inobtcount at the same time?
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
> +
> +# Format V5 filesystem without bigtime support and populate it
> +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo before upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_unmount
> +_check_scratch_fs
> +
> +# Now upgrade to bigtime support
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +_check_scratch_fs
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +
> +# Mount again, look at our files
> +_scratch_mount >> $seqres.full
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Bump one of the timestamps but stay under 2038
> +touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +
> +echo after upgrade and bump:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the bumped timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, bump, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Modify the other timestamp to stretch beyond 2038
> +touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
> +
> +echo after upgrade and extension:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, extension, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/908.out b/tests/xfs/908.out
> new file mode 100644
> index 00000000..5e05854d
> --- /dev/null
> +++ b/tests/xfs/908.out
> @@ -0,0 +1,29 @@
> +QA output created by 908
> +Running xfs_repair to upgrade filesystem.
> +Large timestamp feature only supported on V5 filesystems.
> +FEATURES: BIGTIME:NO
> +Running xfs_repair to upgrade filesystem.
> +Running xfs_repair to upgrade filesystem.
> +Adding inode btree counts to filesystem.
> +Adding large timestamp support to filesystem.
> +before upgrade:
> +915909559
> +915909559
> +Running xfs_repair to upgrade filesystem.
> +Adding large timestamp support to filesystem.
> +FEATURES: BIGTIME:YES
> +after upgrade:
> +915909559
> +915909559
> +after upgrade and bump:
> +915995959
> +915909559
> +after upgrade, bump, and remount:
> +915995959
> +915909559

Did you design those following days timestamps to look so cool? ;-)

> +after upgrade and extension:
> +915995959
> +7956915742
> +after upgrade, extension, and remount:
> +915995959
> +7956915742

Consider this test reviewed-by-me
I'd like more eyes on the quota grace period test, so not providing
a reviewed-by tag for the entire patch.

Thanks,
Amir.
Darrick J. Wong April 21, 2021, 4:41 p.m. UTC | #2
On Wed, Apr 21, 2021 at 09:18:33AM +0300, Amir Goldstein wrote:
> On Wed, Apr 21, 2021 at 3:23 AM Darrick J. Wong <djwong@kernel.org> wrote:
> >
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > Test that we can upgrade an existing filesystem to use bigtime.
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> >  common/xfs        |   16 ++++++
> >  tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/908.out |   29 ++++++++++
> >  tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/909.out |    6 ++
> >  tests/xfs/group   |    2 +
> >  6 files changed, 319 insertions(+)
> >  create mode 100755 tests/xfs/908
> >  create mode 100644 tests/xfs/908.out
> >  create mode 100755 tests/xfs/909
> >  create mode 100644 tests/xfs/909.out
> >
> >
> > diff --git a/common/xfs b/common/xfs
> > index cb6a1978..253a31e5 100644
> > --- a/common/xfs
> > +++ b/common/xfs
> > @@ -1184,3 +1184,19 @@ _xfs_timestamp_range()
> >                         awk '{printf("%s %s", $1, $2);}'
> >         fi
> >  }
> > +
> > +# Require that the scratch device exists, that mkfs can format with bigtime
> > +# enabled, that the kernel can mount such a filesystem, and that xfs_info
> > +# advertises the presence of that feature.
> > +_require_scratch_xfs_bigtime()
> > +{
> > +       _require_scratch
> > +
> > +       _scratch_mkfs -m bigtime=1 &>/dev/null || \
> > +               _notrun "mkfs.xfs doesn't support bigtime feature"
> > +       _try_scratch_mount || \
> > +               _notrun "kernel doesn't support xfs bigtime feature"
> > +       $XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
> > +               _notrun "bigtime feature not advertised on mount?"
> > +       _scratch_unmount
> > +}
> > diff --git a/tests/xfs/908 b/tests/xfs/908
> > new file mode 100755
> > index 00000000..004a8563
> > --- /dev/null
> > +++ b/tests/xfs/908
> > @@ -0,0 +1,117 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 908
> > +#
> > +# Check that we can upgrade a filesystem to support bigtime and that inode
> > +# timestamps work properly after the upgrade.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +       cd /
> > +       rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> > +_require_scratch_xfs_bigtime
> > +_require_xfs_repair_upgrade bigtime
> > +
> > +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> > +       _notrun "Userspace does not support dates past 2038."
> > +
> > +rm -f $seqres.full
> > +
> > +# Make sure we can't upgrade a V4 filesystem
> > +_scratch_mkfs -m crc=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> > +_check_scratch_xfs_features BIGTIME
> > +
> > +# Make sure we're required to specify a feature status
> > +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime 2>> $seqres.full
> > +
> > +# Can we add bigtime and inobtcount at the same time?
> > +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
> > +
> > +# Format V5 filesystem without bigtime support and populate it
> > +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +_scratch_mount >> $seqres.full
> > +
> > +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
> > +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo before upgrade:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_unmount
> > +_check_scratch_fs
> > +
> > +# Now upgrade to bigtime support
> > +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> > +_check_scratch_xfs_features BIGTIME
> > +_check_scratch_fs
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +
> > +# Mount again, look at our files
> > +_scratch_mount >> $seqres.full
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# Bump one of the timestamps but stay under 2038
> > +touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
> > +
> > +echo after upgrade and bump:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_cycle_mount
> > +
> > +# Did the bumped timestamp survive the remount?
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade, bump, and remount:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# Modify the other timestamp to stretch beyond 2038
> > +touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
> > +
> > +echo after upgrade and extension:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_cycle_mount
> > +
> > +# Did the timestamp survive the remount?
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade, extension, and remount:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/908.out b/tests/xfs/908.out
> > new file mode 100644
> > index 00000000..5e05854d
> > --- /dev/null
> > +++ b/tests/xfs/908.out
> > @@ -0,0 +1,29 @@
> > +QA output created by 908
> > +Running xfs_repair to upgrade filesystem.
> > +Large timestamp feature only supported on V5 filesystems.
> > +FEATURES: BIGTIME:NO
> > +Running xfs_repair to upgrade filesystem.
> > +Running xfs_repair to upgrade filesystem.
> > +Adding inode btree counts to filesystem.
> > +Adding large timestamp support to filesystem.
> > +before upgrade:
> > +915909559
> > +915909559
> > +Running xfs_repair to upgrade filesystem.
> > +Adding large timestamp support to filesystem.
> > +FEATURES: BIGTIME:YES
> > +after upgrade:
> > +915909559
> > +915909559
> > +after upgrade and bump:
> > +915995959
> > +915909559
> > +after upgrade, bump, and remount:
> > +915995959
> > +915909559
> 
> Did you design those following days timestamps to look so cool? ;-)

No, the repeated 5s and 9s weren't intended.

> > +after upgrade and extension:
> > +915995959
> > +7956915742
> > +after upgrade, extension, and remount:
> > +915995959
> > +7956915742
> 
> Consider this test reviewed-by-me
> I'd like more eyes on the quota grace period test, so not providing
> a reviewed-by tag for the entire patch.

Ok.

--D

> 
> Thanks,
> Amir.
Allison Henderson April 22, 2021, 9:16 p.m. UTC | #3
On 4/20/21 5:23 PM, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
> 
> Test that we can upgrade an existing filesystem to use bigtime.
> 
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Ok, I think it looks good.  The comments help a lot
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>

> ---
>   common/xfs        |   16 ++++++
>   tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
>   tests/xfs/908.out |   29 ++++++++++
>   tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>   tests/xfs/909.out |    6 ++
>   tests/xfs/group   |    2 +
>   6 files changed, 319 insertions(+)
>   create mode 100755 tests/xfs/908
>   create mode 100644 tests/xfs/908.out
>   create mode 100755 tests/xfs/909
>   create mode 100644 tests/xfs/909.out
> 
> 
> diff --git a/common/xfs b/common/xfs
> index cb6a1978..253a31e5 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -1184,3 +1184,19 @@ _xfs_timestamp_range()
>   			awk '{printf("%s %s", $1, $2);}'
>   	fi
>   }
> +
> +# Require that the scratch device exists, that mkfs can format with bigtime
> +# enabled, that the kernel can mount such a filesystem, and that xfs_info
> +# advertises the presence of that feature.
> +_require_scratch_xfs_bigtime()
> +{
> +	_require_scratch
> +
> +	_scratch_mkfs -m bigtime=1 &>/dev/null || \
> +		_notrun "mkfs.xfs doesn't support bigtime feature"
> +	_try_scratch_mount || \
> +		_notrun "kernel doesn't support xfs bigtime feature"
> +	$XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
> +		_notrun "bigtime feature not advertised on mount?"
> +	_scratch_unmount
> +}
> diff --git a/tests/xfs/908 b/tests/xfs/908
> new file mode 100755
> index 00000000..004a8563
> --- /dev/null
> +++ b/tests/xfs/908
> @@ -0,0 +1,117 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 908
> +#
> +# Check that we can upgrade a filesystem to support bigtime and that inode
> +# timestamps work properly after the upgrade.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +_require_scratch_xfs_bigtime
> +_require_xfs_repair_upgrade bigtime
> +
> +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> +	_notrun "Userspace does not support dates past 2038."
> +
> +rm -f $seqres.full
> +
> +# Make sure we can't upgrade a V4 filesystem
> +_scratch_mkfs -m crc=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +
> +# Make sure we're required to specify a feature status
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime 2>> $seqres.full
> +
> +# Can we add bigtime and inobtcount at the same time?
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
> +
> +# Format V5 filesystem without bigtime support and populate it
> +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo before upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_unmount
> +_check_scratch_fs
> +
> +# Now upgrade to bigtime support
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +_check_scratch_fs
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +
> +# Mount again, look at our files
> +_scratch_mount >> $seqres.full
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Bump one of the timestamps but stay under 2038
> +touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +
> +echo after upgrade and bump:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the bumped timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, bump, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Modify the other timestamp to stretch beyond 2038
> +touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
> +
> +echo after upgrade and extension:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, extension, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/908.out b/tests/xfs/908.out
> new file mode 100644
> index 00000000..5e05854d
> --- /dev/null
> +++ b/tests/xfs/908.out
> @@ -0,0 +1,29 @@
> +QA output created by 908
> +Running xfs_repair to upgrade filesystem.
> +Large timestamp feature only supported on V5 filesystems.
> +FEATURES: BIGTIME:NO
> +Running xfs_repair to upgrade filesystem.
> +Running xfs_repair to upgrade filesystem.
> +Adding inode btree counts to filesystem.
> +Adding large timestamp support to filesystem.
> +before upgrade:
> +915909559
> +915909559
> +Running xfs_repair to upgrade filesystem.
> +Adding large timestamp support to filesystem.
> +FEATURES: BIGTIME:YES
> +after upgrade:
> +915909559
> +915909559
> +after upgrade and bump:
> +915995959
> +915909559
> +after upgrade, bump, and remount:
> +915995959
> +915909559
> +after upgrade and extension:
> +915995959
> +7956915742
> +after upgrade, extension, and remount:
> +915995959
> +7956915742
> diff --git a/tests/xfs/909 b/tests/xfs/909
> new file mode 100755
> index 00000000..66587aa7
> --- /dev/null
> +++ b/tests/xfs/909
> @@ -0,0 +1,149 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 909
> +#
> +# Check that we can upgrade a filesystem to support bigtime and that quota
> +# timers work properly after the upgrade.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +_require_quota
> +_require_scratch_xfs_bigtime
> +_require_xfs_repair_upgrade bigtime
> +
> +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> +	_notrun "Userspace does not support dates past 2038."
> +
> +rm -f $seqres.full
> +
> +# Format V5 filesystem without bigtime support and populate it
> +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> +_qmount_option "usrquota"
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +# Force the block counters for uid 1 and 2 above zero
> +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/a >> $seqres.full
> +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/b >> $seqres.full
> +sync
> +chown 1 $SCRATCH_MNT/a
> +chown 2 $SCRATCH_MNT/b
> +
> +# Set quota limits on uid 1 before upgrading
> +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=12k bhard=1m 1' $SCRATCH_MNT
> +
> +# Make sure the grace period is at /some/ point in the future.  We have to
> +# use bc because not all bashes can handle integer comparisons with 64-bit
> +# numbers.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace="$(cat $tmp.repquota | grep '^#1' | awk '{print $6}')"
> +now="$(date +%s)"
> +res="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test $res -eq 1 || echo "Expected timer expiry (${grace}) to be after now (${now})."
> +
> +_scratch_unmount
> +
> +# Now upgrade to bigtime support
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +_check_scratch_fs
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +
> +# Mount again, see if our quota timer survived
> +_scratch_mount
> +
> +# Set a very generous grace period and quota limits on uid 2 after upgrading
> +$XFS_QUOTA_PROG -x -c 'timer -u -b -d 2147483647' $SCRATCH_MNT
> +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=10000 bhard=150000 2' $SCRATCH_MNT
> +
> +# Query the grace periods to see if they got set properly after the upgrade.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +now="$(date +%s)"
> +
> +# Make sure that uid 1's expiration is in the future...
> +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> +
> +# ...and that uid 2's expiration is after uid 1's...
> +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> +
> +# ...and that uid 2's expiration is after 2038 if right now is far enough
> +# past 1970 that our generous grace period would provide for that.
> +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> +
> +_scratch_cycle_mount
> +
> +# Query the grace periods to see if they survived a remount.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +now="$(date +%s)"
> +
> +# Make sure that uid 1's expiration is in the future...
> +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> +
> +# ...and that uid 2's expiration is after uid 1's...
> +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> +
> +# ...and that uid 2's expiration is after 2038 if right now is far enough
> +# past 1970 that our generous grace period would provide for that.
> +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> +
> +# Now try setting uid 2's expiration to Feb 22 22:22:22 UTC 2222
> +new_expiry=$(date -d 'Feb 22 22:22:22 UTC 2222' +%s)
> +now=$(date +%s)
> +test $now -ge $new_expiry && \
> +	echo "Now is after February 2222?  Expect problems."
> +expiry_delta=$((new_expiry - now))
> +
> +echo "setting expiration to $new_expiry - $now = $expiry_delta" >> $seqres.full
> +$XFS_QUOTA_PROG -x -c "timer -u $expiry_delta 2" -c 'report' $SCRATCH_MNT >> $seqres.full
> +
> +# Did we get an expiration within 5s of the target range?
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +echo "grace2 is $grace2" >> $seqres.full
> +_within_tolerance "grace2 expiry" $grace2 $new_expiry 5 -v
> +
> +_scratch_cycle_mount
> +
> +# ...and is it still within 5s after a remount?
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +echo "grace2 is $grace2" >> $seqres.full
> +_within_tolerance "grace2 expiry after remount" $grace2 $new_expiry 5 -v
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/909.out b/tests/xfs/909.out
> new file mode 100644
> index 00000000..72bf2416
> --- /dev/null
> +++ b/tests/xfs/909.out
> @@ -0,0 +1,6 @@
> +QA output created by 909
> +Running xfs_repair to upgrade filesystem.
> +Adding large timestamp support to filesystem.
> +FEATURES: BIGTIME:YES
> +grace2 expiry is in range
> +grace2 expiry after remount is in range
> diff --git a/tests/xfs/group b/tests/xfs/group
> index b4e29bab..49bc4016 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -526,5 +526,7 @@
>   768 auto quick repair
>   770 auto repair
>   773 auto quick repair
> +908 auto quick bigtime
> +909 auto quick bigtime quota
>   910 auto quick inobtcount
>   911 auto quick bigtime
>
Eryu Guan April 25, 2021, 7:21 a.m. UTC | #4
On Tue, Apr 20, 2021 at 05:23:26PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
> 
> Test that we can upgrade an existing filesystem to use bigtime.
> 
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
>  common/xfs        |   16 ++++++
>  tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/908.out |   29 ++++++++++
>  tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/909.out |    6 ++

I saw the quota test failed as below, is that expected? I was testing
with v5.12-rc7 kernel and latest xfsprogs from for-next branch.


 Running xfs_repair to upgrade filesystem.
 Adding large timestamp support to filesystem.
 FEATURES: BIGTIME:YES
-grace2 expiry is in range
-grace2 expiry after remount is in range
+grace2 expiry has value of 18446744073076532766
+grace2 expiry is NOT in range 7956915737 .. 7956915747
+grace2 expiry after remount has value of 18446744073076532768
+grace2 expiry after remount is NOT in range 7956915737 .. 7956915747

Thanks,
Eryu

P.S. I've applied the first 3 patches.

>  6 files changed, 319 insertions(+)
>  create mode 100755 tests/xfs/908
>  create mode 100644 tests/xfs/908.out
>  create mode 100755 tests/xfs/909
>  create mode 100644 tests/xfs/909.out
> 
> 
> diff --git a/common/xfs b/common/xfs
> index cb6a1978..253a31e5 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -1184,3 +1184,19 @@ _xfs_timestamp_range()
>  			awk '{printf("%s %s", $1, $2);}'
>  	fi
>  }
> +
> +# Require that the scratch device exists, that mkfs can format with bigtime
> +# enabled, that the kernel can mount such a filesystem, and that xfs_info
> +# advertises the presence of that feature.
> +_require_scratch_xfs_bigtime()
> +{
> +	_require_scratch
> +
> +	_scratch_mkfs -m bigtime=1 &>/dev/null || \
> +		_notrun "mkfs.xfs doesn't support bigtime feature"
> +	_try_scratch_mount || \
> +		_notrun "kernel doesn't support xfs bigtime feature"
> +	$XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
> +		_notrun "bigtime feature not advertised on mount?"
> +	_scratch_unmount
> +}
> diff --git a/tests/xfs/908 b/tests/xfs/908
> new file mode 100755
> index 00000000..004a8563
> --- /dev/null
> +++ b/tests/xfs/908
> @@ -0,0 +1,117 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 908
> +#
> +# Check that we can upgrade a filesystem to support bigtime and that inode
> +# timestamps work properly after the upgrade.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +_require_scratch_xfs_bigtime
> +_require_xfs_repair_upgrade bigtime
> +
> +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> +	_notrun "Userspace does not support dates past 2038."
> +
> +rm -f $seqres.full
> +
> +# Make sure we can't upgrade a V4 filesystem
> +_scratch_mkfs -m crc=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +
> +# Make sure we're required to specify a feature status
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime 2>> $seqres.full
> +
> +# Can we add bigtime and inobtcount at the same time?
> +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> +_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
> +
> +# Format V5 filesystem without bigtime support and populate it
> +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo before upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_unmount
> +_check_scratch_fs
> +
> +# Now upgrade to bigtime support
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +_check_scratch_fs
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +
> +# Mount again, look at our files
> +_scratch_mount >> $seqres.full
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Bump one of the timestamps but stay under 2038
> +touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
> +
> +echo after upgrade and bump:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the bumped timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, bump, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# Modify the other timestamp to stretch beyond 2038
> +touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
> +
> +echo after upgrade and extension:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +_scratch_cycle_mount
> +
> +# Did the timestamp survive the remount?
> +ls -la $SCRATCH_MNT/* >> $seqres.full
> +
> +echo after upgrade, extension, and remount:
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/908.out b/tests/xfs/908.out
> new file mode 100644
> index 00000000..5e05854d
> --- /dev/null
> +++ b/tests/xfs/908.out
> @@ -0,0 +1,29 @@
> +QA output created by 908
> +Running xfs_repair to upgrade filesystem.
> +Large timestamp feature only supported on V5 filesystems.
> +FEATURES: BIGTIME:NO
> +Running xfs_repair to upgrade filesystem.
> +Running xfs_repair to upgrade filesystem.
> +Adding inode btree counts to filesystem.
> +Adding large timestamp support to filesystem.
> +before upgrade:
> +915909559
> +915909559
> +Running xfs_repair to upgrade filesystem.
> +Adding large timestamp support to filesystem.
> +FEATURES: BIGTIME:YES
> +after upgrade:
> +915909559
> +915909559
> +after upgrade and bump:
> +915995959
> +915909559
> +after upgrade, bump, and remount:
> +915995959
> +915909559
> +after upgrade and extension:
> +915995959
> +7956915742
> +after upgrade, extension, and remount:
> +915995959
> +7956915742
> diff --git a/tests/xfs/909 b/tests/xfs/909
> new file mode 100755
> index 00000000..66587aa7
> --- /dev/null
> +++ b/tests/xfs/909
> @@ -0,0 +1,149 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 909
> +#
> +# Check that we can upgrade a filesystem to support bigtime and that quota
> +# timers work properly after the upgrade.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +_require_quota
> +_require_scratch_xfs_bigtime
> +_require_xfs_repair_upgrade bigtime
> +
> +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> +	_notrun "Userspace does not support dates past 2038."
> +
> +rm -f $seqres.full
> +
> +# Format V5 filesystem without bigtime support and populate it
> +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> +_qmount_option "usrquota"
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +# Force the block counters for uid 1 and 2 above zero
> +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/a >> $seqres.full
> +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/b >> $seqres.full
> +sync
> +chown 1 $SCRATCH_MNT/a
> +chown 2 $SCRATCH_MNT/b
> +
> +# Set quota limits on uid 1 before upgrading
> +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=12k bhard=1m 1' $SCRATCH_MNT
> +
> +# Make sure the grace period is at /some/ point in the future.  We have to
> +# use bc because not all bashes can handle integer comparisons with 64-bit
> +# numbers.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace="$(cat $tmp.repquota | grep '^#1' | awk '{print $6}')"
> +now="$(date +%s)"
> +res="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test $res -eq 1 || echo "Expected timer expiry (${grace}) to be after now (${now})."
> +
> +_scratch_unmount
> +
> +# Now upgrade to bigtime support
> +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> +_check_scratch_xfs_features BIGTIME
> +_check_scratch_fs
> +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> +
> +# Mount again, see if our quota timer survived
> +_scratch_mount
> +
> +# Set a very generous grace period and quota limits on uid 2 after upgrading
> +$XFS_QUOTA_PROG -x -c 'timer -u -b -d 2147483647' $SCRATCH_MNT
> +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=10000 bhard=150000 2' $SCRATCH_MNT
> +
> +# Query the grace periods to see if they got set properly after the upgrade.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +now="$(date +%s)"
> +
> +# Make sure that uid 1's expiration is in the future...
> +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> +
> +# ...and that uid 2's expiration is after uid 1's...
> +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> +
> +# ...and that uid 2's expiration is after 2038 if right now is far enough
> +# past 1970 that our generous grace period would provide for that.
> +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> +
> +_scratch_cycle_mount
> +
> +# Query the grace periods to see if they survived a remount.
> +repquota -upn $SCRATCH_MNT > $tmp.repquota
> +cat $tmp.repquota >> $seqres.full
> +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +now="$(date +%s)"
> +
> +# Make sure that uid 1's expiration is in the future...
> +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> +
> +# ...and that uid 2's expiration is after uid 1's...
> +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> +
> +# ...and that uid 2's expiration is after 2038 if right now is far enough
> +# past 1970 that our generous grace period would provide for that.
> +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> +
> +# Now try setting uid 2's expiration to Feb 22 22:22:22 UTC 2222
> +new_expiry=$(date -d 'Feb 22 22:22:22 UTC 2222' +%s)
> +now=$(date +%s)
> +test $now -ge $new_expiry && \
> +	echo "Now is after February 2222?  Expect problems."
> +expiry_delta=$((new_expiry - now))
> +
> +echo "setting expiration to $new_expiry - $now = $expiry_delta" >> $seqres.full
> +$XFS_QUOTA_PROG -x -c "timer -u $expiry_delta 2" -c 'report' $SCRATCH_MNT >> $seqres.full
> +
> +# Did we get an expiration within 5s of the target range?
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +echo "grace2 is $grace2" >> $seqres.full
> +_within_tolerance "grace2 expiry" $grace2 $new_expiry 5 -v
> +
> +_scratch_cycle_mount
> +
> +# ...and is it still within 5s after a remount?
> +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> +echo "grace2 is $grace2" >> $seqres.full
> +_within_tolerance "grace2 expiry after remount" $grace2 $new_expiry 5 -v
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/909.out b/tests/xfs/909.out
> new file mode 100644
> index 00000000..72bf2416
> --- /dev/null
> +++ b/tests/xfs/909.out
> @@ -0,0 +1,6 @@
> +QA output created by 909
> +Running xfs_repair to upgrade filesystem.
> +Adding large timestamp support to filesystem.
> +FEATURES: BIGTIME:YES
> +grace2 expiry is in range
> +grace2 expiry after remount is in range
> diff --git a/tests/xfs/group b/tests/xfs/group
> index b4e29bab..49bc4016 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -526,5 +526,7 @@
>  768 auto quick repair
>  770 auto repair
>  773 auto quick repair
> +908 auto quick bigtime
> +909 auto quick bigtime quota
>  910 auto quick inobtcount
>  911 auto quick bigtime
Darrick J. Wong April 25, 2021, 3:42 p.m. UTC | #5
On Sun, Apr 25, 2021 at 03:21:23PM +0800, Eryu Guan wrote:
> On Tue, Apr 20, 2021 at 05:23:26PM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> > 
> > Test that we can upgrade an existing filesystem to use bigtime.
> > 
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> >  common/xfs        |   16 ++++++
> >  tests/xfs/908     |  117 ++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/908.out |   29 ++++++++++
> >  tests/xfs/909     |  149 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/909.out |    6 ++
> 
> I saw the quota test failed as below, is that expected? I was testing
> with v5.12-rc7 kernel and latest xfsprogs from for-next branch.
> 
> 
>  Running xfs_repair to upgrade filesystem.
>  Adding large timestamp support to filesystem.
>  FEATURES: BIGTIME:YES
> -grace2 expiry is in range
> -grace2 expiry after remount is in range
> +grace2 expiry has value of 18446744073076532766
> +grace2 expiry is NOT in range 7956915737 .. 7956915747
> +grace2 expiry after remount has value of 18446744073076532768
> +grace2 expiry after remount is NOT in range 7956915737 .. 7956915747

I think you need a version of quota-tools with commit 16b60cb9e315ed;
v4.06 should do.  I'll make a note of that in xfs/909 and resubmit.

--D

> Thanks,
> Eryu
> 
> P.S. I've applied the first 3 patches.
> 
> >  6 files changed, 319 insertions(+)
> >  create mode 100755 tests/xfs/908
> >  create mode 100644 tests/xfs/908.out
> >  create mode 100755 tests/xfs/909
> >  create mode 100644 tests/xfs/909.out
> > 
> > 
> > diff --git a/common/xfs b/common/xfs
> > index cb6a1978..253a31e5 100644
> > --- a/common/xfs
> > +++ b/common/xfs
> > @@ -1184,3 +1184,19 @@ _xfs_timestamp_range()
> >  			awk '{printf("%s %s", $1, $2);}'
> >  	fi
> >  }
> > +
> > +# Require that the scratch device exists, that mkfs can format with bigtime
> > +# enabled, that the kernel can mount such a filesystem, and that xfs_info
> > +# advertises the presence of that feature.
> > +_require_scratch_xfs_bigtime()
> > +{
> > +	_require_scratch
> > +
> > +	_scratch_mkfs -m bigtime=1 &>/dev/null || \
> > +		_notrun "mkfs.xfs doesn't support bigtime feature"
> > +	_try_scratch_mount || \
> > +		_notrun "kernel doesn't support xfs bigtime feature"
> > +	$XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
> > +		_notrun "bigtime feature not advertised on mount?"
> > +	_scratch_unmount
> > +}
> > diff --git a/tests/xfs/908 b/tests/xfs/908
> > new file mode 100755
> > index 00000000..004a8563
> > --- /dev/null
> > +++ b/tests/xfs/908
> > @@ -0,0 +1,117 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 908
> > +#
> > +# Check that we can upgrade a filesystem to support bigtime and that inode
> > +# timestamps work properly after the upgrade.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +	cd /
> > +	rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> > +_require_scratch_xfs_bigtime
> > +_require_xfs_repair_upgrade bigtime
> > +
> > +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> > +	_notrun "Userspace does not support dates past 2038."
> > +
> > +rm -f $seqres.full
> > +
> > +# Make sure we can't upgrade a V4 filesystem
> > +_scratch_mkfs -m crc=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> > +_check_scratch_xfs_features BIGTIME
> > +
> > +# Make sure we're required to specify a feature status
> > +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime 2>> $seqres.full
> > +
> > +# Can we add bigtime and inobtcount at the same time?
> > +_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
> > +_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
> > +
> > +# Format V5 filesystem without bigtime support and populate it
> > +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +_scratch_mount >> $seqres.full
> > +
> > +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
> > +touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo before upgrade:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_unmount
> > +_check_scratch_fs
> > +
> > +# Now upgrade to bigtime support
> > +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> > +_check_scratch_xfs_features BIGTIME
> > +_check_scratch_fs
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +
> > +# Mount again, look at our files
> > +_scratch_mount >> $seqres.full
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# Bump one of the timestamps but stay under 2038
> > +touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
> > +
> > +echo after upgrade and bump:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_cycle_mount
> > +
> > +# Did the bumped timestamp survive the remount?
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade, bump, and remount:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# Modify the other timestamp to stretch beyond 2038
> > +touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
> > +
> > +echo after upgrade and extension:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +_scratch_cycle_mount
> > +
> > +# Did the timestamp survive the remount?
> > +ls -la $SCRATCH_MNT/* >> $seqres.full
> > +
> > +echo after upgrade, extension, and remount:
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
> > +TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/908.out b/tests/xfs/908.out
> > new file mode 100644
> > index 00000000..5e05854d
> > --- /dev/null
> > +++ b/tests/xfs/908.out
> > @@ -0,0 +1,29 @@
> > +QA output created by 908
> > +Running xfs_repair to upgrade filesystem.
> > +Large timestamp feature only supported on V5 filesystems.
> > +FEATURES: BIGTIME:NO
> > +Running xfs_repair to upgrade filesystem.
> > +Running xfs_repair to upgrade filesystem.
> > +Adding inode btree counts to filesystem.
> > +Adding large timestamp support to filesystem.
> > +before upgrade:
> > +915909559
> > +915909559
> > +Running xfs_repair to upgrade filesystem.
> > +Adding large timestamp support to filesystem.
> > +FEATURES: BIGTIME:YES
> > +after upgrade:
> > +915909559
> > +915909559
> > +after upgrade and bump:
> > +915995959
> > +915909559
> > +after upgrade, bump, and remount:
> > +915995959
> > +915909559
> > +after upgrade and extension:
> > +915995959
> > +7956915742
> > +after upgrade, extension, and remount:
> > +915995959
> > +7956915742
> > diff --git a/tests/xfs/909 b/tests/xfs/909
> > new file mode 100755
> > index 00000000..66587aa7
> > --- /dev/null
> > +++ b/tests/xfs/909
> > @@ -0,0 +1,149 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 909
> > +#
> > +# Check that we can upgrade a filesystem to support bigtime and that quota
> > +# timers work properly after the upgrade.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +	cd /
> > +	rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/quota
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> > +_require_quota
> > +_require_scratch_xfs_bigtime
> > +_require_xfs_repair_upgrade bigtime
> > +
> > +date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
> > +	_notrun "Userspace does not support dates past 2038."
> > +
> > +rm -f $seqres.full
> > +
> > +# Format V5 filesystem without bigtime support and populate it
> > +_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
> > +_qmount_option "usrquota"
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +_scratch_mount >> $seqres.full
> > +
> > +# Force the block counters for uid 1 and 2 above zero
> > +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/a >> $seqres.full
> > +_pwrite_byte 0x61 0 64k $SCRATCH_MNT/b >> $seqres.full
> > +sync
> > +chown 1 $SCRATCH_MNT/a
> > +chown 2 $SCRATCH_MNT/b
> > +
> > +# Set quota limits on uid 1 before upgrading
> > +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=12k bhard=1m 1' $SCRATCH_MNT
> > +
> > +# Make sure the grace period is at /some/ point in the future.  We have to
> > +# use bc because not all bashes can handle integer comparisons with 64-bit
> > +# numbers.
> > +repquota -upn $SCRATCH_MNT > $tmp.repquota
> > +cat $tmp.repquota >> $seqres.full
> > +grace="$(cat $tmp.repquota | grep '^#1' | awk '{print $6}')"
> > +now="$(date +%s)"
> > +res="$(echo "${grace} > ${now}" | $BC_PROG)"
> > +test $res -eq 1 || echo "Expected timer expiry (${grace}) to be after now (${now})."
> > +
> > +_scratch_unmount
> > +
> > +# Now upgrade to bigtime support
> > +_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
> > +_check_scratch_xfs_features BIGTIME
> > +_check_scratch_fs
> > +_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
> > +
> > +# Mount again, see if our quota timer survived
> > +_scratch_mount
> > +
> > +# Set a very generous grace period and quota limits on uid 2 after upgrading
> > +$XFS_QUOTA_PROG -x -c 'timer -u -b -d 2147483647' $SCRATCH_MNT
> > +$XFS_QUOTA_PROG -x -c 'limit -u bsoft=10000 bhard=150000 2' $SCRATCH_MNT
> > +
> > +# Query the grace periods to see if they got set properly after the upgrade.
> > +repquota -upn $SCRATCH_MNT > $tmp.repquota
> > +cat $tmp.repquota >> $seqres.full
> > +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> > +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> > +now="$(date +%s)"
> > +
> > +# Make sure that uid 1's expiration is in the future...
> > +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> > +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> > +
> > +# ...and that uid 2's expiration is after uid 1's...
> > +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> > +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> > +
> > +# ...and that uid 2's expiration is after 2038 if right now is far enough
> > +# past 1970 that our generous grace period would provide for that.
> > +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> > +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> > +
> > +_scratch_cycle_mount
> > +
> > +# Query the grace periods to see if they survived a remount.
> > +repquota -upn $SCRATCH_MNT > $tmp.repquota
> > +cat $tmp.repquota >> $seqres.full
> > +grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
> > +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> > +now="$(date +%s)"
> > +
> > +# Make sure that uid 1's expiration is in the future...
> > +res1="$(echo "${grace} > ${now}" | $BC_PROG)"
> > +test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
> > +
> > +# ...and that uid 2's expiration is after uid 1's...
> > +res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
> > +test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
> > +
> > +# ...and that uid 2's expiration is after 2038 if right now is far enough
> > +# past 1970 that our generous grace period would provide for that.
> > +res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
> > +test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
> > +
> > +# Now try setting uid 2's expiration to Feb 22 22:22:22 UTC 2222
> > +new_expiry=$(date -d 'Feb 22 22:22:22 UTC 2222' +%s)
> > +now=$(date +%s)
> > +test $now -ge $new_expiry && \
> > +	echo "Now is after February 2222?  Expect problems."
> > +expiry_delta=$((new_expiry - now))
> > +
> > +echo "setting expiration to $new_expiry - $now = $expiry_delta" >> $seqres.full
> > +$XFS_QUOTA_PROG -x -c "timer -u $expiry_delta 2" -c 'report' $SCRATCH_MNT >> $seqres.full
> > +
> > +# Did we get an expiration within 5s of the target range?
> > +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> > +echo "grace2 is $grace2" >> $seqres.full
> > +_within_tolerance "grace2 expiry" $grace2 $new_expiry 5 -v
> > +
> > +_scratch_cycle_mount
> > +
> > +# ...and is it still within 5s after a remount?
> > +grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
> > +echo "grace2 is $grace2" >> $seqres.full
> > +_within_tolerance "grace2 expiry after remount" $grace2 $new_expiry 5 -v
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/909.out b/tests/xfs/909.out
> > new file mode 100644
> > index 00000000..72bf2416
> > --- /dev/null
> > +++ b/tests/xfs/909.out
> > @@ -0,0 +1,6 @@
> > +QA output created by 909
> > +Running xfs_repair to upgrade filesystem.
> > +Adding large timestamp support to filesystem.
> > +FEATURES: BIGTIME:YES
> > +grace2 expiry is in range
> > +grace2 expiry after remount is in range
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index b4e29bab..49bc4016 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -526,5 +526,7 @@
> >  768 auto quick repair
> >  770 auto repair
> >  773 auto quick repair
> > +908 auto quick bigtime
> > +909 auto quick bigtime quota
> >  910 auto quick inobtcount
> >  911 auto quick bigtime
diff mbox series

Patch

diff --git a/common/xfs b/common/xfs
index cb6a1978..253a31e5 100644
--- a/common/xfs
+++ b/common/xfs
@@ -1184,3 +1184,19 @@  _xfs_timestamp_range()
 			awk '{printf("%s %s", $1, $2);}'
 	fi
 }
+
+# Require that the scratch device exists, that mkfs can format with bigtime
+# enabled, that the kernel can mount such a filesystem, and that xfs_info
+# advertises the presence of that feature.
+_require_scratch_xfs_bigtime()
+{
+	_require_scratch
+
+	_scratch_mkfs -m bigtime=1 &>/dev/null || \
+		_notrun "mkfs.xfs doesn't support bigtime feature"
+	_try_scratch_mount || \
+		_notrun "kernel doesn't support xfs bigtime feature"
+	$XFS_INFO_PROG "$SCRATCH_MNT" | grep -q -w "bigtime=1" || \
+		_notrun "bigtime feature not advertised on mount?"
+	_scratch_unmount
+}
diff --git a/tests/xfs/908 b/tests/xfs/908
new file mode 100755
index 00000000..004a8563
--- /dev/null
+++ b/tests/xfs/908
@@ -0,0 +1,117 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 908
+#
+# Check that we can upgrade a filesystem to support bigtime and that inode
+# timestamps work properly after the upgrade.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_command "$XFS_ADMIN_PROG" "xfs_admin"
+_require_scratch_xfs_bigtime
+_require_xfs_repair_upgrade bigtime
+
+date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
+	_notrun "Userspace does not support dates past 2038."
+
+rm -f $seqres.full
+
+# Make sure we can't upgrade a V4 filesystem
+_scratch_mkfs -m crc=0 >> $seqres.full
+_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
+_check_scratch_xfs_features BIGTIME
+
+# Make sure we're required to specify a feature status
+_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O bigtime 2>> $seqres.full
+
+# Can we add bigtime and inobtcount at the same time?
+_scratch_mkfs -m crc=1,bigtime=0,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O bigtime=1,inobtcount=1 2>> $seqres.full
+
+# Format V5 filesystem without bigtime support and populate it
+_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
+_scratch_mount >> $seqres.full
+
+touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/a
+touch -d 'Jan 9 19:19:19 UTC 1999' $SCRATCH_MNT/b
+ls -la $SCRATCH_MNT/* >> $seqres.full
+
+echo before upgrade:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+_scratch_unmount
+_check_scratch_fs
+
+# Now upgrade to bigtime support
+_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
+_check_scratch_xfs_features BIGTIME
+_check_scratch_fs
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
+
+# Mount again, look at our files
+_scratch_mount >> $seqres.full
+ls -la $SCRATCH_MNT/* >> $seqres.full
+
+echo after upgrade:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+# Bump one of the timestamps but stay under 2038
+touch -d 'Jan 10 19:19:19 UTC 1999' $SCRATCH_MNT/a
+
+echo after upgrade and bump:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+_scratch_cycle_mount
+
+# Did the bumped timestamp survive the remount?
+ls -la $SCRATCH_MNT/* >> $seqres.full
+
+echo after upgrade, bump, and remount:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+# Modify the other timestamp to stretch beyond 2038
+touch -d 'Feb 22 22:22:22 UTC 2222' $SCRATCH_MNT/b
+
+echo after upgrade and extension:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+_scratch_cycle_mount
+
+# Did the timestamp survive the remount?
+ls -la $SCRATCH_MNT/* >> $seqres.full
+
+echo after upgrade, extension, and remount:
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/a
+TZ=UTC stat -c '%Y' $SCRATCH_MNT/b
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/908.out b/tests/xfs/908.out
new file mode 100644
index 00000000..5e05854d
--- /dev/null
+++ b/tests/xfs/908.out
@@ -0,0 +1,29 @@ 
+QA output created by 908
+Running xfs_repair to upgrade filesystem.
+Large timestamp feature only supported on V5 filesystems.
+FEATURES: BIGTIME:NO
+Running xfs_repair to upgrade filesystem.
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Adding large timestamp support to filesystem.
+before upgrade:
+915909559
+915909559
+Running xfs_repair to upgrade filesystem.
+Adding large timestamp support to filesystem.
+FEATURES: BIGTIME:YES
+after upgrade:
+915909559
+915909559
+after upgrade and bump:
+915995959
+915909559
+after upgrade, bump, and remount:
+915995959
+915909559
+after upgrade and extension:
+915995959
+7956915742
+after upgrade, extension, and remount:
+915995959
+7956915742
diff --git a/tests/xfs/909 b/tests/xfs/909
new file mode 100755
index 00000000..66587aa7
--- /dev/null
+++ b/tests/xfs/909
@@ -0,0 +1,149 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 909
+#
+# Check that we can upgrade a filesystem to support bigtime and that quota
+# timers work properly after the upgrade.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# real QA test starts here
+_supported_fs xfs
+_require_command "$XFS_ADMIN_PROG" "xfs_admin"
+_require_quota
+_require_scratch_xfs_bigtime
+_require_xfs_repair_upgrade bigtime
+
+date --date='Jan 1 00:00:00 UTC 2040' > /dev/null 2>&1 || \
+	_notrun "Userspace does not support dates past 2038."
+
+rm -f $seqres.full
+
+# Format V5 filesystem without bigtime support and populate it
+_scratch_mkfs -m crc=1,bigtime=0 >> $seqres.full
+_qmount_option "usrquota"
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
+_scratch_mount >> $seqres.full
+
+# Force the block counters for uid 1 and 2 above zero
+_pwrite_byte 0x61 0 64k $SCRATCH_MNT/a >> $seqres.full
+_pwrite_byte 0x61 0 64k $SCRATCH_MNT/b >> $seqres.full
+sync
+chown 1 $SCRATCH_MNT/a
+chown 2 $SCRATCH_MNT/b
+
+# Set quota limits on uid 1 before upgrading
+$XFS_QUOTA_PROG -x -c 'limit -u bsoft=12k bhard=1m 1' $SCRATCH_MNT
+
+# Make sure the grace period is at /some/ point in the future.  We have to
+# use bc because not all bashes can handle integer comparisons with 64-bit
+# numbers.
+repquota -upn $SCRATCH_MNT > $tmp.repquota
+cat $tmp.repquota >> $seqres.full
+grace="$(cat $tmp.repquota | grep '^#1' | awk '{print $6}')"
+now="$(date +%s)"
+res="$(echo "${grace} > ${now}" | $BC_PROG)"
+test $res -eq 1 || echo "Expected timer expiry (${grace}) to be after now (${now})."
+
+_scratch_unmount
+
+# Now upgrade to bigtime support
+_scratch_xfs_admin -O bigtime=1 2>> $seqres.full
+_check_scratch_xfs_features BIGTIME
+_check_scratch_fs
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
+
+# Mount again, see if our quota timer survived
+_scratch_mount
+
+# Set a very generous grace period and quota limits on uid 2 after upgrading
+$XFS_QUOTA_PROG -x -c 'timer -u -b -d 2147483647' $SCRATCH_MNT
+$XFS_QUOTA_PROG -x -c 'limit -u bsoft=10000 bhard=150000 2' $SCRATCH_MNT
+
+# Query the grace periods to see if they got set properly after the upgrade.
+repquota -upn $SCRATCH_MNT > $tmp.repquota
+cat $tmp.repquota >> $seqres.full
+grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
+grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
+now="$(date +%s)"
+
+# Make sure that uid 1's expiration is in the future...
+res1="$(echo "${grace} > ${now}" | $BC_PROG)"
+test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
+
+# ...and that uid 2's expiration is after uid 1's...
+res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
+test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
+
+# ...and that uid 2's expiration is after 2038 if right now is far enough
+# past 1970 that our generous grace period would provide for that.
+res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
+test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
+
+_scratch_cycle_mount
+
+# Query the grace periods to see if they survived a remount.
+repquota -upn $SCRATCH_MNT > $tmp.repquota
+cat $tmp.repquota >> $seqres.full
+grace1="$(repquota -upn $SCRATCH_MNT | grep '^#1' | awk '{print $6}')"
+grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
+now="$(date +%s)"
+
+# Make sure that uid 1's expiration is in the future...
+res1="$(echo "${grace} > ${now}" | $BC_PROG)"
+test "${res1}" -eq 1 || echo "Expected uid 1 expiry (${grace1}) to be after now (${now})."
+
+# ...and that uid 2's expiration is after uid 1's...
+res2="$(echo "${grace2} > ${grace1}" | $BC_PROG)"
+test "${res2}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after uid 1 (${grace1})."
+
+# ...and that uid 2's expiration is after 2038 if right now is far enough
+# past 1970 that our generous grace period would provide for that.
+res3="$(echo "(${now} < 100) || (${grace2} > 2147483648)" | $BC_PROG)"
+test "${res3}" -eq 1 || echo "Expected uid 2 expiry (${grace2}) to be after 2038."
+
+# Now try setting uid 2's expiration to Feb 22 22:22:22 UTC 2222
+new_expiry=$(date -d 'Feb 22 22:22:22 UTC 2222' +%s)
+now=$(date +%s)
+test $now -ge $new_expiry && \
+	echo "Now is after February 2222?  Expect problems."
+expiry_delta=$((new_expiry - now))
+
+echo "setting expiration to $new_expiry - $now = $expiry_delta" >> $seqres.full
+$XFS_QUOTA_PROG -x -c "timer -u $expiry_delta 2" -c 'report' $SCRATCH_MNT >> $seqres.full
+
+# Did we get an expiration within 5s of the target range?
+grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
+echo "grace2 is $grace2" >> $seqres.full
+_within_tolerance "grace2 expiry" $grace2 $new_expiry 5 -v
+
+_scratch_cycle_mount
+
+# ...and is it still within 5s after a remount?
+grace2="$(repquota -upn $SCRATCH_MNT | grep '^#2' | awk '{print $6}')"
+echo "grace2 is $grace2" >> $seqres.full
+_within_tolerance "grace2 expiry after remount" $grace2 $new_expiry 5 -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/909.out b/tests/xfs/909.out
new file mode 100644
index 00000000..72bf2416
--- /dev/null
+++ b/tests/xfs/909.out
@@ -0,0 +1,6 @@ 
+QA output created by 909
+Running xfs_repair to upgrade filesystem.
+Adding large timestamp support to filesystem.
+FEATURES: BIGTIME:YES
+grace2 expiry is in range
+grace2 expiry after remount is in range
diff --git a/tests/xfs/group b/tests/xfs/group
index b4e29bab..49bc4016 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -526,5 +526,7 @@ 
 768 auto quick repair
 770 auto repair
 773 auto quick repair
+908 auto quick bigtime
+909 auto quick bigtime quota
 910 auto quick inobtcount
 911 auto quick bigtime