@@ -122,11 +122,7 @@ _acl_list()
{
_file1=$1
- if [ $HOSTOS = "IRIX" ]; then
- ls -dD $_file1 | _acl_filter_id
- else
- chacl -l $_file1 | _acl_filter_id
- fi
+ chacl -l $_file1 | _acl_filter_id
}
# create an ACL with n ACEs in it
@@ -52,15 +52,10 @@
export LANG=C
export LC_ALL=C
-# Warning: don't put freeware before /usr/bsd on IRIX coz you'll
-# get the wrong hostname and set your system name to -s :)
-[ -d /usr/bsd ] && PATH=$PATH:/usr/bsd
-[ -d /usr/freeware/bin ] && PATH=$PATH:/usr/freeware/bin
PATH=".:$PATH"
export HOST=`hostname -s`
export HOSTOS=`uname -s`
-[ "$HOSTOS" = "IRIX64" ] && export HOSTOS="IRIX"
export MODULAR=0 # using XFS as a module or not
export BOOT="/boot" # install target for kernels
@@ -219,13 +214,6 @@ fi
export UDEV_SETTLE_PROG
case "$HOSTOS" in
- IRIX*)
- export MKFS_XFS_PROG="`set_prog_path mkfs_xfs`"
- export MKFS_UDF_PROG="`set_prog_path mkfs_udf`"
- export XFS_FSR_PROG="`set_prog_path /usr/etc/fsr_xfs`"
- export MKFS_NFS_PROG="false"
- export MKFS_CIFS_PROG="false"
- ;;
Linux)
export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
@@ -395,8 +395,6 @@ End-of-File
_mk_fillconfig_perm()
{
- # dir_guid: ugo=rwx,g+s on dir is for IRIX chmod(1)
-
cat <<End-of-File >$tmp.config
# pathname size/dir user group mode
#
@@ -406,7 +404,7 @@ file_sticky 10 $nobody $nobody 01777
file_mix1 10 $nobody $nobody 761
file_mix2 10 $nobody $nobody 642
dir_suid d $nobody $nobody 04777
-dir_guid d $nobody $nobody ugo=rwx,g+s
+dir_guid d $nobody $nobody 02777
dir_sticky d $nobody $nobody 01777
dir_mix1 d $nobody $nobody 761
dir_mix2 d $nobody $nobody 642
@@ -798,25 +796,6 @@ _ls_filter()
| sed -e 's/total [0-9][0-9]*/total TOTAL/'
}
-#
-# Filtering of Irix character hwgraph device names
-# e.g.
-# chardev: /hw/node/xtalk/15/pci/0/scsi_ctlr/0/target/1/lun/0/disk/partition/4/char
-# blkdev: /dev/dsk/dks0d1s4
-#
-_filter_devchar()
-{
- $AWK_PROG '
- /\/hw\/node/ {
- sub(/\/hw.*scsi_ctlr\//,"/dev/dsk/dks") # blah blah /dev/dsk/dks0/target/1/....
- sub(/\/target\//,"d") # blah blah /dev/dsk/dks0d1/lun/0/disk.....
- sub(/\/lun.*partition\//,"s") # blah blah /dev/dsk/dks0d1s4/char
- sub(/\/char/,"") # blah blah /dev/dsk/dks0d1s4
- }
- { print }
- '
-}
-
#
# Filter out the non-deterministic dump msgs from
@@ -824,7 +803,6 @@ _filter_devchar()
#
_dump_filter_main()
{
- _filter_devchar |\
sed \
-e "s#$__XFSDUMP_PROG#xfsdump#" \
-e "s#$XFSRESTORE_PROG#xfsrestore#" \
@@ -1191,7 +1169,7 @@ _do_restore_toc()
echo "Contents of dump ..."
opts="$_restore_debug$restore_args -f $dump_file -t"
echo "xfsrestore $opts" | _dir_filter
- cd $SCRATCH_MNT # for IRIX which needs xfs cwd
+ cd $SCRATCH_MNT
$XFSRESTORE_PROG $opts 2>&1 | tee -a $seqres.full | _dump_filter_main |\
_check_quota_file |\
_check_quota_entries |\
@@ -1484,25 +1462,14 @@ _check_quota_entries()
# xfsrestore: user quota information written to ...'
# xfsrestore: group quota information written to ...'
# xfsrestore: project quota information written to ...'
-#
-# If on IRIX then look for:
-# xfsrestore: use 'edquota' to restore quotas
-# Else look for:
# xfsrestore: use 'xfs_quota' to restore quotas
#
_check_quota_dumprestore()
{
- if [ "$HOSTOS" == "IRIX" ]; then
_check_quota 'user quota information' \
'group quota information' \
'project quota information' | \
- sed "/xfsrestore:.*use 'edquota' to restore quotas/d"
- else
- _check_quota 'user quota information' \
- 'group quota information' \
- 'project quota information' | \
- sed "/xfsrestore:.*use 'xfs_quota' to restore quotas/d"
- fi
+ sed "/xfsrestore:.*use 'xfs_quota' to restore quotas/d"
}
#
@@ -21,35 +21,12 @@
_check_filestreams_support()
{
- local irix_timeout_sysvar="xfs_mfstream_timeout"
- local linux_timeout_procvar="/proc/sys/fs/xfs/filestream_centisecs"
- local streams_avail=""
- if [ "$HOSTOS" == "IRIX" ]; then
- # check for the filestreams timeout systune variable in irix
- streams_avail=`systune $irix_timeout_sysvar 2>&1 |
- perl -ne 'if (/'$irix_timeout_sysvar'\s+=\s+\d+/) {print "true"}'`
- else
- # check for the filestreams timeout proc entry in linux
- [ -f $linux_timeout_procvar ] && streams_avail="true"
- fi
-
- if [ "$streams_avail" == "true" ]; then
- return 0
- else
- return 1
- fi
+ [ -f /proc/sys/fs/xfs/filestream_centisecs ]
}
_set_stream_timeout_centisecs()
{
- local new_timeout_csecs=$1
- local irix_timeout_sysvar="xfs_mfstream_timeout"
- local linux_timeout_procvar="/proc/sys/fs/xfs/filestream_centisecs"
- if [ "$HOSTOS" == "IRIX" ]; then
- echo y | systune -r $irix_timeout_sysvar $new_timeout_csecs >/dev/null
- else
- echo $new_timeout_csecs > $linux_timeout_procvar
- fi
+ echo $1 > /proc/sys/fs/xfs/filestream_centisecs
}
_do_stream()
@@ -63,22 +40,14 @@ _do_stream()
local blocks_in_file=`expr $file_size / $bsize`
mkdir $directory_name
- if [ "$iflag" = "1" -a "$HOSTOS" != "IRIX" ]; then
+ if [ "$iflag" = "1" ]; then
$XFS_IO_PROG -x -c "chattr +S" $directory_name \
|| _fail "chattr of filestream flag"
fi
cd $directory_name
- local dd_cmd=""
- if [ "$HOSTOS" == "IRIX" ]; then
- # for irix use lmdd
- dd_cmd="lmdd"
- [ "$dio" = "1" ] && dd_cmd="$dd_cmd odirect=1"
- else
- # for linux use dd
- dd_cmd="dd"
- [ "$dio" = "1" ] && dd_cmd="$dd_cmd oflag=direct"
- fi
+ local dd_cmd="dd"
+ [ "$dio" = "1" ] && dd_cmd="$dd_cmd oflag=direct"
dd_cmd="$dd_cmd if=/dev/zero bs=${bsize} count=${blocks_in_file}"
local i=1
@@ -140,7 +109,7 @@ _test_streams() {
_scratch_mkfs_xfs -dsize=$size,agcount=$agcount >/dev/null 2>&1 \
|| _fail "mkfs failed"
- if [ "$use_iflag" = "0" -o "$HOSTOS" == "IRIX" ]; then
+ if [ "$use_iflag" = "0" ]; then
# mount using filestreams mount option
_scratch_mount "-o filestreams" \
|| _fail "filestreams mount failed"
@@ -314,7 +314,6 @@ _print_operation()
# and may not match with the FS mounted at a different LR size
# => xlog_do_recovery_pass() can not handle the different hdr sizes
# it assumes them all to be the same between the start..finish
-# NB: On IRIX there is no UMOUNT record and so we could start from -s 0.
_print_transaction_inode()
{
@@ -235,7 +235,7 @@ _scratch_options()
case $type in
mkfs)
- [ "$HOSTOS" != "IRIX" ] && SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
+ SCRATCH_OPTIONS="$SCRATCH_OPTIONS -f"
rt_opt="-r"
log_opt="-l"
;;
@@ -284,14 +284,7 @@ _mount_ops_filter()
[ $last_index -gt 0 ] && shift $last_index
FS_ESCAPED=$1
- # irix is fussy about how it is fed its mount options
- # - multiple -o's are not allowed
- # - no spaces between comma delimitered options
- # the sed script replaces all -o's (except the first) with a comma
- # not required for linux, but won't hurt
-
- echo $params | sed -e 's/[[:space:]]\+-o[[:space:]]*/UnIqUe/1; s/[[:space:]]\+-o[[:space:]]*/,/g; s/UnIqUe/ -o /1' \
- | sed -e 's/dmapi/dmi/' \
+ echo $params | sed -e 's/dmapi/dmi/' \
| $PERL_PROG -ne "s#mtpt=[^,|^\n|^\s]*#mtpt=$FS_ESCAPED\1\2#; print;"
}
@@ -2042,12 +2035,7 @@ s,^\s*$,,;
_user_do()
{
- if [ "$HOSTOS" == "IRIX" ]
- then
- echo $1 | /bin/bash "su $qa_user 2>&1" | _filter_user_do
- else
echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do
- fi
}
_require_xfs_io_command()
@@ -2606,9 +2594,7 @@ _full_platform_details()
_get_os_name()
{
- if [ "`uname`" == "IRIX64" ] || [ "`uname`" == "IRIX" ]; then
- echo 'irix'
- elif [ "`uname`" == "Linux" ]; then
+ if [ "`uname`" == "Linux" ]; then
echo 'linux'
else
echo Unknown operating system: `uname`
@@ -3172,9 +3158,6 @@ run_check()
_require_test_symlinks()
{
- # IRIX UDF does not support symlinks
- [ "$HOSTOS" = "IRIX" -a "$FSTYP" = 'udf' ] && \
- _notrun "Require symlinks support"
target=`mktemp -p $TEST_DIR`
link=`mktemp -p $TEST_DIR -u`
ln -s `basename $target` $link