@@ -8,20 +8,19 @@
# write the value 0, each bit and finally the entry beyond the maximum legal
# value. Also makes sure a core write and hex input still work.
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
+# test exit cleanup goes here
+cleanup() { :; }
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# include test specific environments here
+_supported_fs xfs
+_supported_os Linux
+_require_scratch_nocheck
+_require_xfs_mkfs_crc
_do_bit_test()
{
@@ -39,18 +38,6 @@ _do_bit_test()
echo
}
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# real QA test starts here
-
-# Modify as appropriate.
-_supported_fs xfs
-_supported_os Linux
-_require_scratch_nocheck
-_require_xfs_mkfs_crc
-
_scratch_mkfs -m crc=0 >/dev/null 2>&1
_scratch_mount
@@ -79,5 +66,4 @@ _scratch_xfs_db -x -c "inode $FILE_INO" -c "write core.gen 0xa5"
_scratch_xfs_db -x -c "inode $FILE_INO" -c "write core.gen 0"
_scratch_xfs_db -x -c "inode $FILE_INO" -c "write core.gen #5a5a"
_scratch_xfs_db -x -c "inode $FILE_INO" -c "write core.gen #a5a5"
-status=0
-exit
+_success
@@ -13,26 +13,15 @@
# for further explanation. (NB: while the commit log was good, the
# patch had a bug which was subsequently fixed)
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# Modify as appropriate.
+. common/setup_test
+
+# test exit cleanup goes here
+cleanup() { :; }
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# include test specific environments here
_supported_fs xfs
_supported_os Linux
_require_scratch_nocheck
@@ -41,8 +30,6 @@ _require_no_large_scratch_dev
# So we can explicitly turn it _off_:
_require_xfs_mkfs_crc
-rm -f $seqres.full
-
_scratch_mkfs_xfs -m crc=0 -d size=128m >> $seqres.full 2>&1 || _fail "mkfs failed"
# Scribble past a couple V4 secondary superblocks to populate sb_crc
@@ -56,6 +43,4 @@ _scratch_mount
# This should pass
$XFS_GROWFS_PROG $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "growfs failed"
-# success, all done
-status=0
-exit
+_success
@@ -6,20 +6,15 @@
#
# exercise xfs_db bug #784078
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
+# test exit cleanup goes here
+cleanup() { :; }
-tmp=/tmp/$$
-here=`pwd`
-status=0 # success is the default!
-trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
+# remove previous $seqres.full before test
+rm -f $seqres.full
-# real QA test starts here
+# include test specific environments here
_supported_fs xfs
_supported_os Linux
_require_test
@@ -67,3 +62,5 @@ test_done
echo "=== TEST 7 ==="
xfs_db -r -c 'ring' $TEST_DEV
test_done
+
+_success
@@ -6,21 +6,19 @@
#
# exercise xfs_db bug #789674 and other freesp functionality
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=0
+# test exit cleanup goes here
+cleanup() { :; }
-_cleanup()
-{
- _scratch_unmount
- rm -f $tmp.*
- exit $status
-}
-trap "_cleanup" 0 1 2 3 15
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# include test specific environments here
+_supported_fs xfs
+_supported_os Linux
+_require_scratch
+_require_no_large_scratch_dev
_populate_scratch()
{
@@ -36,19 +34,6 @@ _populate_scratch()
_scratch_mount # and then remount
}
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# real QA test starts here
-_supported_fs xfs
-_supported_os Linux
-
-_require_scratch
-_require_no_large_scratch_dev
-
-rm -f $seqres.full
-
_populate_scratch
eval `$DF_PROG -P --block-size=512 $SCRATCH_MNT 2>&1 \
@@ -84,7 +69,7 @@ then
echo "Error: $SCRATCH_DEV: freesp mismatch: $ans"
echo "xfs_db output ..."
cat $tmp.xfs_db
- status=1
+ exit
fi
# check the 'pct' field from freesp command is good
@@ -103,7 +88,7 @@ then
echo "Error: $SCRATCH_DEV: pct mismatch: $ans (expected 100)"
echo "xfs_db output ..."
cat $tmp.xfs_db
- status=1
+ exit
fi
-exit
+_success
@@ -10,34 +10,20 @@
# inadvertently caused primary SB CRC failures to not error out, this
# is a regression test for that fix.
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
+# test exit cleanup goes here
+cleanup() { :; }
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
+# remove previous $seqres.full before test
+rm -f $seqres.full
-# Modify as appropriate.
+# include test specific environments here
_supported_fs xfs
_supported_os Linux
-
_require_scratch_nocheck
_require_xfs_mkfs_crc
-rm -f $seqres.full
-
_scratch_mkfs_xfs -m crc=1 >> $seqres.full 2>&1 || _fail "mkfs failed"
# Zap the crc. xfs_db updates the CRC post-write, so poke it directly
@@ -46,6 +32,4 @@ $XFS_IO_PROG -c "pwrite 224 4" -c fsync $SCRATCH_DEV | _filter_xfs_io
# should FAIL, the crc is bad; golden output contains mount failure
_try_scratch_mount 2>&1 | _filter_error_mount
-# success, all done
-status=0
-exit
+_success
@@ -7,31 +7,18 @@
# Test xfs' "fail at unmount" error handling configuration. Stop
# XFS from retrying to writeback forever at unmount.
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
+# test exit cleanup goes here
+cleanup() {
_dmerror_cleanup
}
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-. ./common/dmerror
-
# remove previous $seqres.full before test
rm -f $seqres.full
-# real QA test starts here
+# include test specific environments here
+. ./common/dmerror
_supported_fs xfs
_supported_os Linux
_require_scratch
@@ -83,6 +70,4 @@ _dmerror_load_working_table
_dmerror_mount
_dmerror_unmount
-# success, all done
-status=0
-exit
+_success
@@ -6,35 +6,21 @@
#
# Test to verify Q_XQUOTARM functionality.
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
+# test exit cleanup goes here
+cleanup() { :; }
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
+# remove previous $seqres.full before test
+rm -f $seqres.full
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
+# include test specific environments here
. ./common/quota
-
-# Modify as appropriate.
_supported_fs xfs
_supported_os Linux
-
_require_scratch
_require_xfs_quota
-rm -f $seqres.full
-
_scratch_mkfs_xfs | _filter_mkfs > /dev/null 2> $tmp.mkfs
. $tmp.mkfs
@@ -83,6 +69,4 @@ _qmount
_require_prjquota $SCRATCH_DEV
do_test uquotino $PQUOTINO up
-# success, all done
-status=0
-exit
+_success
@@ -6,32 +6,29 @@
#
# randholes test
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
+. common/setup_test
-here=`pwd`
-tmp=/tmp/$$
-status=0 # success is the default!
-pgsize=`$here/src/feature -s`
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- rm -f $tmp.*
- rm -rf $TEST_DIR/randholes.$$.*
+# test exit cleanup goes here
+cleanup() {
+ rm -rf $TEST_DIR/randholes.$$.*
}
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# include test specific environments here
+_supported_fs xfs
+_supported_os Linux
+_require_test
+
+pgsize=`$here/src/feature -s`
+
_filter()
{
sed -e "s/-b $pgsize/-b PGSIZE/g" \
-e "s/-l .* -c/-l FSIZE -c/g"
}
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
_do_test()
{
_n="$1"
@@ -64,17 +61,9 @@ _do_test()
echo "$_n - output from bmap:" >>$seqres.full
echo "--------------------------------------" >>$seqres.full
xfs_bmap -vvv $out >>$seqres.full
- status=1
fi
}
-# real QA test starts here
-_supported_fs xfs
-_supported_os Linux
-_require_test
-
-rm -f $seqres.full
-
# Note on special numbers here.
#
# We are trying to create roughly 50 or 100 holes in a file
@@ -95,5 +84,4 @@ _do_test 5 100 "-d -l `expr 400 \* $pgsize` -c 100 -b $pgsize"
# todo: realtime.
-# success, all done
-exit
+_success
@@ -6,24 +6,25 @@
#
# XFS allocator test (preallocation - allocp, resvsp ,etc)
#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
+. common/setup_test
+
+# test exit cleanup goes here
+cleanup() { :; }
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# include test specific environments here
+_supported_fs xfs
+_supported_os Linux
+_require_scratch
+
+_supported_fs generic
+_supported_os Linux
+
# This isn't really related to fs block size, it's just what
# alloc uses for the "block" unit in it's input parameters...
bsize=4096
-
-_cleanup()
-{
- echo "*** unmount"
- _scratch_unmount
-}
-
_block_filter()
{
sed \
@@ -54,16 +55,6 @@ _filesize()
ls -l $1 | $AWK_PROG '{print "filesize = " $5}'
}
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# real QA test starts here
-_supported_fs xfs
-_supported_os Linux
-
-_require_scratch
-
_init
out=$SCRATCH_MNT/$$.tmp
@@ -167,5 +158,6 @@ EOF
_filesize $out
-status=0
-exit
+echo "*** unmount"
+_scratch_unmount
+_success