Message ID | 20200714094009.8654-2-yangx.jy@cn.fujitsu.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Make fstests support new behavior of DAX | expand |
On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: > 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option > 2) _require_dax_iflag() checks FS_XFLAG_DAX > > Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> > --- > > V5->V6: > Simplify _require_scratch_dax_mountopt because it is enough to only check > dax/dax=always mount option. See the following reasons: > 1) we cannot detect if underlying device supports dax by mounting dax=inode > or dax=never. > 2) dax=always, dax=inode, dax=never are always introduced together. > > common/rc | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/common/rc b/common/rc > index f17b19f2..aeec1f11 100644 > --- a/common/rc > +++ b/common/rc > @@ -3188,6 +3188,28 @@ _require_scratch_dax() > _scratch_unmount > } > > +# Only accept dax/dax=always mount option becasue dax=always, dax=inode > +# and dax=never are always introduced together. > +_require_scratch_dax_mountopt() > +{ > + local mountopt=$1 > + > + _require_scratch > + _scratch_mkfs > /dev/null 2>&1 > + _try_scratch_mount "-o $mountopt" > /dev/null 2>&1 || \ > + _notrun "mount $SCRATCH_DEV with $mountopt failed" > + > + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ > + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" > + > + _scratch_unmount > +} > + > +_require_dax_iflag() > +{ > + _require_xfs_io_command "chattr" "x" > +} > + > # Does norecovery support by this fs? > _require_norecovery() > { > -- > 2.21.0 > > >
On 2020/7/15 9:59, Ira Weiny wrote: > On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: >> 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option >> 2) _require_dax_iflag() checks FS_XFLAG_DAX >> >> Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> > Reviewed-by: Ira Weiny<ira.weiny@intel.com> Hi Ira, Do you want to check if invalid parameter is passed to _require_scratch_dax_mountopt? Thought I think it is not necessary(user should pass correct parament). Like this: [ "$mountopt" != "dax" ] && [ "$mountopt" != "dax=always" ] && _notrun "$mountopt is invalid" Best Regards, Xiao Yang >> --- >> >> V5->V6: >> Simplify _require_scratch_dax_mountopt because it is enough to only check >> dax/dax=always mount option. See the following reasons: >> 1) we cannot detect if underlying device supports dax by mounting dax=inode >> or dax=never. >> 2) dax=always, dax=inode, dax=never are always introduced together. >> >> common/rc | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> >> diff --git a/common/rc b/common/rc >> index f17b19f2..aeec1f11 100644 >> --- a/common/rc >> +++ b/common/rc >> @@ -3188,6 +3188,28 @@ _require_scratch_dax() >> _scratch_unmount >> } >> >> +# Only accept dax/dax=always mount option becasue dax=always, dax=inode >> +# and dax=never are always introduced together. >> +_require_scratch_dax_mountopt() >> +{ >> + local mountopt=$1 >> + >> + _require_scratch >> + _scratch_mkfs> /dev/null 2>&1 >> + _try_scratch_mount "-o $mountopt"> /dev/null 2>&1 || \ >> + _notrun "mount $SCRATCH_DEV with $mountopt failed" >> + >> + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ >> + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" >> + >> + _scratch_unmount >> +} >> + >> +_require_dax_iflag() >> +{ >> + _require_xfs_io_command "chattr" "x" >> +} >> + >> # Does norecovery support by this fs? >> _require_norecovery() >> { >> -- >> 2.21.0 >> >> >> > > . >
On Wed, Jul 15, 2020 at 11:19:58AM +0800, Xiao Yang wrote: > On 2020/7/15 9:59, Ira Weiny wrote: > > On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: > > > 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option > > > 2) _require_dax_iflag() checks FS_XFLAG_DAX > > > > > > Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> > > Reviewed-by: Ira Weiny<ira.weiny@intel.com> > Hi Ira, > > Do you want to check if invalid parameter is passed to > _require_scratch_dax_mountopt? Thought > I think it is not necessary(user should pass correct parament). > Like this: > [ "$mountopt" != "dax" ] && [ "$mountopt" != "dax=always" ] && _notrun > "$mountopt is invalid" I thought this patch was just checking if the filesystem/device supported DAX such that DAX tests could run using either old _or_ new dax support... But after thinking about it I think we need something more complicated. Something like: if ('-o dax=inode') // FS is DAX with per file support (ie ext4 || XFS kernel >= 5.8) else if ('-o dax') // FS is DAX (ie ext4 || XFS on kernel < 5.8) else // FS has no dax support. Do we do that with 2 functions? _require_scratch_dax_mountopt() _require_scratch_new_dax_mountopt() If both fail we are in the else clause above? We can use the dax=inode because it is a new option and is not necessarily the option used while running the tests. (I think. as I said my xfstests skills are not great so I'm not always sure of the correct patterns) Ira > > Best Regards, > Xiao Yang > > > --- > > > > > > V5->V6: > > > Simplify _require_scratch_dax_mountopt because it is enough to only check > > > dax/dax=always mount option. See the following reasons: > > > 1) we cannot detect if underlying device supports dax by mounting dax=inode > > > or dax=never. > > > 2) dax=always, dax=inode, dax=never are always introduced together. > > > > > > common/rc | 22 ++++++++++++++++++++++ > > > 1 file changed, 22 insertions(+) > > > > > > diff --git a/common/rc b/common/rc > > > index f17b19f2..aeec1f11 100644 > > > --- a/common/rc > > > +++ b/common/rc > > > @@ -3188,6 +3188,28 @@ _require_scratch_dax() > > > _scratch_unmount > > > } > > > > > > +# Only accept dax/dax=always mount option becasue dax=always, dax=inode > > > +# and dax=never are always introduced together. > > > +_require_scratch_dax_mountopt() > > > +{ > > > + local mountopt=$1 > > > + > > > + _require_scratch > > > + _scratch_mkfs> /dev/null 2>&1 > > > + _try_scratch_mount "-o $mountopt"> /dev/null 2>&1 || \ > > > + _notrun "mount $SCRATCH_DEV with $mountopt failed" > > > + > > > + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ > > > + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" > > > + > > > + _scratch_unmount > > > +} > > > + > > > +_require_dax_iflag() > > > +{ > > > + _require_xfs_io_command "chattr" "x" > > > +} > > > + > > > # Does norecovery support by this fs? > > > _require_norecovery() > > > { > > > -- > > > 2.21.0 > > > > > > > > > > > > > . > > > > >
On 2020/7/15 12:15, Ira Weiny wrote: > On Wed, Jul 15, 2020 at 11:19:58AM +0800, Xiao Yang wrote: >> On 2020/7/15 9:59, Ira Weiny wrote: >>> On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: >>>> 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option >>>> 2) _require_dax_iflag() checks FS_XFLAG_DAX >>>> >>>> Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> >>> Reviewed-by: Ira Weiny<ira.weiny@intel.com> >> Hi Ira, >> >> Do you want to check if invalid parameter is passed to >> _require_scratch_dax_mountopt? Thought >> I think it is not necessary(user should pass correct parament). >> Like this: >> [ "$mountopt" != "dax" ]&& [ "$mountopt" != "dax=always" ]&& _notrun >> "$mountopt is invalid" > I thought this patch was just checking if the filesystem/device supported DAX > such that DAX tests could run using either old _or_ new dax support... > But after thinking about it I think we need something more complicated. > > Something like: > > if ('-o dax=inode') > // FS is DAX with per file support (ie ext4 || XFS kernel>= 5.8) Hi Ira, dax=inode/dax=never cannot check if underlying device supports dax, so I perfer to use dax=always For example: XFS: # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ # mount | grep sda8 /dev/sda8 on /mnt/xfstests/test type xfs (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota) ... # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ # mount | grep sda8 /dev/sda8 on /mnt/xfstests/test type xfs (rw,relatime,seclabel,attr2,dax=never,inode64,logbufs=8,logbsize=32k,noquota) EXT4: # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ # mount | grep sda8 /dev/sda8 on /mnt/xfstests/test type ext4 (rw,relatime,seclabel,dax=inode) ... # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ mount: /mnt/xfstests/test: wrong fs type, bad option, bad superblock on /dev/sda8, missing codepage or helper program, or other error. # dmesg | grep DAX [597988.165120] EXT4-fs (sda8): DAX unsupported by block device. If we want to test new dax(i.e. dax=inode, dax=always or dax=never), so pass "dax=always" to _require_scratch_dax_mountopt If we want to test old dax or new dax=always(either of them), so pass "dax" to _require_scratch_dax_mountopt Best Regards, Xiao Yang > else if ('-o dax') > // FS is DAX (ie ext4 || XFS on kernel< 5.8) > else > // FS has no dax support. > > Do we do that with 2 functions? > > _require_scratch_dax_mountopt() > _require_scratch_new_dax_mountopt() > > If both fail we are in the else clause above? > > We can use the dax=inode because it is a new option and is not necessarily the > option used while running the tests. (I think. as I said my xfstests skills > are not great so I'm not always sure of the correct patterns) > > Ira > >> Best Regards, >> Xiao Yang >>>> --- >>>> >>>> V5->V6: >>>> Simplify _require_scratch_dax_mountopt because it is enough to only check >>>> dax/dax=always mount option. See the following reasons: >>>> 1) we cannot detect if underlying device supports dax by mounting dax=inode >>>> or dax=never. >>>> 2) dax=always, dax=inode, dax=never are always introduced together. >>>> >>>> common/rc | 22 ++++++++++++++++++++++ >>>> 1 file changed, 22 insertions(+) >>>> >>>> diff --git a/common/rc b/common/rc >>>> index f17b19f2..aeec1f11 100644 >>>> --- a/common/rc >>>> +++ b/common/rc >>>> @@ -3188,6 +3188,28 @@ _require_scratch_dax() >>>> _scratch_unmount >>>> } >>>> >>>> +# Only accept dax/dax=always mount option becasue dax=always, dax=inode >>>> +# and dax=never are always introduced together. >>>> +_require_scratch_dax_mountopt() >>>> +{ >>>> + local mountopt=$1 >>>> + >>>> + _require_scratch >>>> + _scratch_mkfs> /dev/null 2>&1 >>>> + _try_scratch_mount "-o $mountopt"> /dev/null 2>&1 || \ >>>> + _notrun "mount $SCRATCH_DEV with $mountopt failed" >>>> + >>>> + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ >>>> + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" >>>> + >>>> + _scratch_unmount >>>> +} >>>> + >>>> +_require_dax_iflag() >>>> +{ >>>> + _require_xfs_io_command "chattr" "x" >>>> +} >>>> + >>>> # Does norecovery support by this fs? >>>> _require_norecovery() >>>> { >>>> -- >>>> 2.21.0 >>>> >>>> >>>> >>> . >>> >> >> > > . >
On Wed, Jul 15, 2020 at 01:55:14PM +0800, Xiao Yang wrote: > On 2020/7/15 12:15, Ira Weiny wrote: > > On Wed, Jul 15, 2020 at 11:19:58AM +0800, Xiao Yang wrote: > > > On 2020/7/15 9:59, Ira Weiny wrote: > > > > On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: > > > > > 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option > > > > > 2) _require_dax_iflag() checks FS_XFLAG_DAX > > > > > > > > > > Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> > > > > Reviewed-by: Ira Weiny<ira.weiny@intel.com> > > > Hi Ira, > > > > > > Do you want to check if invalid parameter is passed to > > > _require_scratch_dax_mountopt? Thought > > > I think it is not necessary(user should pass correct parament). > > > Like this: > > > [ "$mountopt" != "dax" ]&& [ "$mountopt" != "dax=always" ]&& _notrun > > > "$mountopt is invalid" > > I thought this patch was just checking if the filesystem/device supported DAX > > such that DAX tests could run using either old _or_ new dax support... > > But after thinking about it I think we need something more complicated. > > > > Something like: > > > > if ('-o dax=inode') > > // FS is DAX with per file support (ie ext4 || XFS kernel>= 5.8) > Hi Ira, > > dax=inode/dax=never cannot check if underlying device supports dax, so I > perfer to use dax=always > For example: > XFS: > # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ > # mount | grep sda8 > /dev/sda8 on /mnt/xfstests/test type xfs > (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota) > ... > # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ > # mount | grep sda8 > /dev/sda8 on /mnt/xfstests/test type xfs > (rw,relatime,seclabel,attr2,dax=never,inode64,logbufs=8,logbsize=32k,noquota) > > EXT4: > # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ > # mount | grep sda8 > /dev/sda8 on /mnt/xfstests/test type ext4 (rw,relatime,seclabel,dax=inode) > ... > # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ > mount: /mnt/xfstests/test: wrong fs type, bad option, bad superblock on > /dev/sda8, missing codepage or helper program, or other error. > # dmesg | grep DAX > [597988.165120] EXT4-fs (sda8): DAX unsupported by block device. > > If we want to test new dax(i.e. dax=inode, dax=always or dax=never), so pass > "dax=always" to _require_scratch_dax_mountopt > If we want to test old dax or new dax=always(either of them), so pass "dax" > to _require_scratch_dax_mountopt That does seem like the only way to figure out if a fs/device combination supports dax. The valid arguments to the _require_scratch_dax* helpers are worth mentioning in a comment above the function, but I suspect that adding validation code is probably overkill. --D > Best Regards, > Xiao Yang > > else if ('-o dax') > > // FS is DAX (ie ext4 || XFS on kernel< 5.8) > > else > > // FS has no dax support. > > > > Do we do that with 2 functions? > > > > _require_scratch_dax_mountopt() > > _require_scratch_new_dax_mountopt() > > > > If both fail we are in the else clause above? > > > > We can use the dax=inode because it is a new option and is not necessarily the > > option used while running the tests. (I think. as I said my xfstests skills > > are not great so I'm not always sure of the correct patterns) > > > > Ira > > > > > Best Regards, > > > Xiao Yang > > > > > --- > > > > > > > > > > V5->V6: > > > > > Simplify _require_scratch_dax_mountopt because it is enough to only check > > > > > dax/dax=always mount option. See the following reasons: > > > > > 1) we cannot detect if underlying device supports dax by mounting dax=inode > > > > > or dax=never. > > > > > 2) dax=always, dax=inode, dax=never are always introduced together. > > > > > > > > > > common/rc | 22 ++++++++++++++++++++++ > > > > > 1 file changed, 22 insertions(+) > > > > > > > > > > diff --git a/common/rc b/common/rc > > > > > index f17b19f2..aeec1f11 100644 > > > > > --- a/common/rc > > > > > +++ b/common/rc > > > > > @@ -3188,6 +3188,28 @@ _require_scratch_dax() > > > > > _scratch_unmount > > > > > } > > > > > > > > > > +# Only accept dax/dax=always mount option becasue dax=always, dax=inode > > > > > +# and dax=never are always introduced together. > > > > > +_require_scratch_dax_mountopt() > > > > > +{ > > > > > + local mountopt=$1 > > > > > + > > > > > + _require_scratch > > > > > + _scratch_mkfs> /dev/null 2>&1 > > > > > + _try_scratch_mount "-o $mountopt"> /dev/null 2>&1 || \ > > > > > + _notrun "mount $SCRATCH_DEV with $mountopt failed" > > > > > + > > > > > + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ > > > > > + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" > > > > > + > > > > > + _scratch_unmount > > > > > +} > > > > > + > > > > > +_require_dax_iflag() > > > > > +{ > > > > > + _require_xfs_io_command "chattr" "x" > > > > > +} > > > > > + > > > > > # Does norecovery support by this fs? > > > > > _require_norecovery() > > > > > { > > > > > -- > > > > > 2.21.0 > > > > > > > > > > > > > > > > > > > . > > > > > > > > > > > > > > . > > > > >
On Wed, Jul 15, 2020 at 08:56:31AM -0700, Darrick J. Wong wrote: > On Wed, Jul 15, 2020 at 01:55:14PM +0800, Xiao Yang wrote: > > On 2020/7/15 12:15, Ira Weiny wrote: > > > On Wed, Jul 15, 2020 at 11:19:58AM +0800, Xiao Yang wrote: > > > > On 2020/7/15 9:59, Ira Weiny wrote: > > > > > On Tue, Jul 14, 2020 at 05:40:03PM +0800, Xiao Yang wrote: > > > > > > 1) _require_scratch_dax_mountopt() checks both old and new DAX mount option > > > > > > 2) _require_dax_iflag() checks FS_XFLAG_DAX > > > > > > > > > > > > Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com> > > > > > Reviewed-by: Ira Weiny<ira.weiny@intel.com> > > > > Hi Ira, > > > > > > > > Do you want to check if invalid parameter is passed to > > > > _require_scratch_dax_mountopt? Thought > > > > I think it is not necessary(user should pass correct parament). > > > > Like this: > > > > [ "$mountopt" != "dax" ]&& [ "$mountopt" != "dax=always" ]&& _notrun > > > > "$mountopt is invalid" > > > I thought this patch was just checking if the filesystem/device supported DAX > > > such that DAX tests could run using either old _or_ new dax support... > > > But after thinking about it I think we need something more complicated. > > > > > > Something like: > > > > > > if ('-o dax=inode') > > > // FS is DAX with per file support (ie ext4 || XFS kernel>= 5.8) > > Hi Ira, > > > > dax=inode/dax=never cannot check if underlying device supports dax, so I > > perfer to use dax=always > > For example: > > XFS: > > # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ > > # mount | grep sda8 > > /dev/sda8 on /mnt/xfstests/test type xfs > > (rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota) > > ... > > # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ > > # mount | grep sda8 > > /dev/sda8 on /mnt/xfstests/test type xfs > > (rw,relatime,seclabel,attr2,dax=never,inode64,logbufs=8,logbsize=32k,noquota) > > > > EXT4: > > # mount -o dax=inode /dev/sda8 /mnt/xfstests/test/ > > # mount | grep sda8 > > /dev/sda8 on /mnt/xfstests/test type ext4 (rw,relatime,seclabel,dax=inode) > > ... > > # mount -o dax=always /dev/sda8 /mnt/xfstests/test/ > > mount: /mnt/xfstests/test: wrong fs type, bad option, bad superblock on > > /dev/sda8, missing codepage or helper program, or other error. > > # dmesg | grep DAX > > [597988.165120] EXT4-fs (sda8): DAX unsupported by block device. > > > > If we want to test new dax(i.e. dax=inode, dax=always or dax=never), so pass > > "dax=always" to _require_scratch_dax_mountopt > > If we want to test old dax or new dax=always(either of them), so pass "dax" > > to _require_scratch_dax_mountopt > > That does seem like the only way to figure out if a fs/device > combination supports dax. > > The valid arguments to the _require_scratch_dax* helpers are worth > mentioning in a comment above the function, but I suspect that adding > validation code is probably overkill. Ok yes I see it now. You are both correct. I think a comment which indicates that one should pads '-o dax' to check for 'old support' vs '-o dax=always' for 'new support' and the test chooses which option to pass (based on the support it needs) to _require_scratch_dax_mountopt()... Sorry I was not completely following before! Ira
diff --git a/common/rc b/common/rc index f17b19f2..aeec1f11 100644 --- a/common/rc +++ b/common/rc @@ -3188,6 +3188,28 @@ _require_scratch_dax() _scratch_unmount } +# Only accept dax/dax=always mount option becasue dax=always, dax=inode +# and dax=never are always introduced together. +_require_scratch_dax_mountopt() +{ + local mountopt=$1 + + _require_scratch + _scratch_mkfs > /dev/null 2>&1 + _try_scratch_mount "-o $mountopt" > /dev/null 2>&1 || \ + _notrun "mount $SCRATCH_DEV with $mountopt failed" + + _fs_options $SCRATCH_DEV | egrep -q "dax(=always|,|$)" || \ + _notrun "$SCRATCH_DEV $FSTYP does not support -o $mountopt" + + _scratch_unmount +} + +_require_dax_iflag() +{ + _require_xfs_io_command "chattr" "x" +} + # Does norecovery support by this fs? _require_norecovery() {
1) _require_scratch_dax_mountopt() checks both old and new DAX mount option 2) _require_dax_iflag() checks FS_XFLAG_DAX Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> --- V5->V6: Simplify _require_scratch_dax_mountopt because it is enough to only check dax/dax=always mount option. See the following reasons: 1) we cannot detect if underlying device supports dax by mounting dax=inode or dax=never. 2) dax=always, dax=inode, dax=never are always introduced together. common/rc | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)