diff mbox series

[v5.1,1/1] xfs: test that the needsrepair feature works as advertised

Message ID 20210422004913.GG3122235@magnolia (mailing list archive)
State New, archived
Headers show
Series [v5.1,1/1] xfs: test that the needsrepair feature works as advertised | expand

Commit Message

Darrick J. Wong April 22, 2021, 12:49 a.m. UTC
From: Darrick J. Wong <djwong@kernel.org>

Make sure that the needsrepair feature flag can be cleared only by
repair and that mounts are prohibited when the feature is set.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
v5.1: add a little randomness to x/770, fix the hook check function
---
 common/xfs        |   29 +++++++++++++++++
 tests/xfs/768     |   80 +++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/768.out |    4 ++
 tests/xfs/770     |   91 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/770.out |    2 +
 tests/xfs/group   |    2 +
 6 files changed, 208 insertions(+)
 create mode 100755 tests/xfs/768
 create mode 100644 tests/xfs/768.out
 create mode 100755 tests/xfs/770
 create mode 100644 tests/xfs/770.out

Comments

Brian Foster April 22, 2021, 11:26 a.m. UTC | #1
On Wed, Apr 21, 2021 at 05:49:13PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
> 
> Make sure that the needsrepair feature flag can be cleared only by
> repair and that mounts are prohibited when the feature is set.
> 
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> v5.1: add a little randomness to x/770, fix the hook check function
> ---

Looks good, thanks for the tweaks:

Reviewed-by: Brian Foster <bfoster@redhat.com>

>  common/xfs        |   29 +++++++++++++++++
>  tests/xfs/768     |   80 +++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/768.out |    4 ++
>  tests/xfs/770     |   91 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/770.out |    2 +
>  tests/xfs/group   |    2 +
>  6 files changed, 208 insertions(+)
>  create mode 100755 tests/xfs/768
>  create mode 100644 tests/xfs/768.out
>  create mode 100755 tests/xfs/770
>  create mode 100644 tests/xfs/770.out
> 
> diff --git a/common/xfs b/common/xfs
> index 2e78fd4f..ba6523ad 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -312,6 +312,14 @@ _scratch_xfs_check()
>  	_xfs_check $SCRATCH_OPTIONS $* $SCRATCH_DEV
>  }
>  
> +# Check for secret debugging hooks in xfs_repair
> +_require_libxfs_debug_flag() {
> +	local hook="$1"
> +
> +	grep -q "$hook" "$(type -P xfs_repair)" || \
> +		_notrun "libxfs debug hook $hook not detected?"
> +}
> +
>  _scratch_xfs_repair()
>  {
>  	SCRATCH_OPTIONS=""
> @@ -1099,3 +1107,24 @@ _xfs_get_cowgc_interval() {
>  		_fail "Can't find cowgc interval procfs knob?"
>  	fi
>  }
> +
> +# Print the status of the given features on the scratch filesystem.
> +# Returns 0 if all features are found, 1 otherwise.
> +_check_scratch_xfs_features()
> +{
> +	local features="$(_scratch_xfs_db -c 'version')"
> +	local output=("FEATURES:")
> +	local found=0
> +
> +	for feature in "$@"; do
> +		local status="NO"
> +		if echo "${features}" | grep -q -w "${feature}"; then
> +			status="YES"
> +			found=$((found + 1))
> +		fi
> +		output+=("${feature}:${status}")
> +	done
> +
> +	echo "${output[@]}"
> +	test "${found}" -eq "$#"
> +}
> diff --git a/tests/xfs/768 b/tests/xfs/768
> new file mode 100755
> index 00000000..84c54a6e
> --- /dev/null
> +++ b/tests/xfs/768
> @@ -0,0 +1,80 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 768
> +#
> +# Make sure that the kernel won't mount a filesystem if repair forcibly sets
> +# NEEDSREPAIR while fixing metadata.  Corrupt a directory in such a way as
> +# to force repair to write an invalid dirent value as a sentinel to trigger a
> +# repair activity in a later phase.  Use a debug knob in xfs_repair to abort
> +# the repair immediately after forcing the flag on.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_scratch_nocheck
> +_require_scratch_xfs_crc		# needsrepair only exists for v5
> +_require_libxfs_debug_flag LIBXFS_DEBUG_WRITE_CRASH
> +
> +rm -f $seqres.full
> +
> +# Set up a real filesystem for our actual test
> +_scratch_mkfs >> $seqres.full
> +
> +# Create a directory large enough to have a dir data block.  2k worth of
> +# dirent names ought to do it.
> +_scratch_mount
> +mkdir -p $SCRATCH_MNT/fubar
> +for i in $(seq 0 256 2048); do
> +	fname=$(printf "%0255d" $i)
> +	ln -s -f urk $SCRATCH_MNT/fubar/$fname
> +done
> +inum=$(stat -c '%i' $SCRATCH_MNT/fubar)
> +_scratch_unmount
> +
> +# Fuzz the directory
> +_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \
> +	-c "fuzz -d bu[2].inumber add" >> $seqres.full
> +
> +# Try to repair the directory, force it to crash after setting needsrepair
> +LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full
> +test $? -eq 137 || echo "repair should have been killed??"
> +
> +# We can't mount, right?
> +_check_scratch_xfs_features NEEDSREPAIR
> +_try_scratch_mount &> $tmp.mount
> +res=$?
> +_filter_scratch < $tmp.mount
> +if [ $res -eq 0 ]; then
> +	echo "Should not be able to mount after needsrepair crash"
> +	_scratch_unmount
> +fi
> +
> +# Repair properly this time and retry the mount
> +_scratch_xfs_repair 2>> $seqres.full
> +_check_scratch_xfs_features NEEDSREPAIR
> +
> +_scratch_mount
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/768.out b/tests/xfs/768.out
> new file mode 100644
> index 00000000..1168ba25
> --- /dev/null
> +++ b/tests/xfs/768.out
> @@ -0,0 +1,4 @@
> +QA output created by 768
> +FEATURES: NEEDSREPAIR:YES
> +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
> +FEATURES: NEEDSREPAIR:NO
> diff --git a/tests/xfs/770 b/tests/xfs/770
> new file mode 100755
> index 00000000..5265eaca
> --- /dev/null
> +++ b/tests/xfs/770
> @@ -0,0 +1,91 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 770
> +#
> +# Populate a filesystem with all types of metadata, then run repair with the
> +# libxfs write failure trigger set to go after a single write.  Check that the
> +# injected error trips, causing repair to abort, that needsrepair is set on the
> +# fs, the kernel won't mount; and that a non-injecting repair run clears
> +# needsrepair and makes the filesystem mountable again.
> +#
> +# Repeat with the trip point set to successively higher numbers of writes until
> +# we hit ~200 writes or repair manages to run to completion without tripping.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/populate
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_scratch_nocheck
> +_require_scratch_xfs_crc		# needsrepair only exists for v5
> +_require_populate_commands
> +_require_libxfs_debug_flag LIBXFS_DEBUG_WRITE_CRASH
> +
> +rm -f $seqres.full
> +
> +# Populate the filesystem
> +_scratch_populate_cached nofill >> $seqres.full 2>&1
> +
> +max_writes=200			# 200 loops should be enough for anyone
> +nr_incr=$((13 / TIME_FACTOR))
> +test $nr_incr -lt 1 && nr_incr=1
> +for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do
> +	# Add a tiny bit of randomness into each run
> +	allowed_writes=$(( nr_writes + (RANDOM % 7) ))
> +	echo "Setting debug hook to crash after $allowed_writes writes." >> $seqres.full
> +
> +	# Start a repair and force it to abort after some number of writes
> +	LIBXFS_DEBUG_WRITE_CRASH=ddev=$allowed_writes \
> +			_scratch_xfs_repair 2>> $seqres.full
> +	res=$?
> +	if [ $res -ne 0 ] && [ $res -ne 137 ]; then
> +		echo "repair failed with $res??"
> +		break
> +	elif [ $res -eq 0 ]; then
> +		[ $nr_writes -eq 1 ] && \
> +			echo "ran to completion on the first try?"
> +		break
> +	fi
> +
> +	# Check the state of NEEDSREPAIR after repair fails.  If it isn't set
> +	# but repair -n says the fs is clean, then it's possible that the
> +	# injected error caused it to abort immediately after the write that
> +	# cleared NEEDSREPAIR.
> +	if ! _check_scratch_xfs_features NEEDSREPAIR > /dev/null &&
> +	   ! _scratch_xfs_repair -n &>> $seqres.full; then
> +		echo "NEEDSREPAIR should be set on corrupt fs"
> +	fi
> +done
> +
> +# If NEEDSREPAIR is still set on the filesystem, ensure that a full run
> +# cleans everything up.
> +if _check_scratch_xfs_features NEEDSREPAIR > /dev/null; then
> +	echo "Clearing NEEDSREPAIR" >> $seqres.full
> +	_scratch_xfs_repair 2>> $seqres.full
> +	_check_scratch_xfs_features NEEDSREPAIR > /dev/null && \
> +		echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test"
> +fi
> +
> +# success, all done
> +echo Silence is golden.
> +status=0
> +exit
> diff --git a/tests/xfs/770.out b/tests/xfs/770.out
> new file mode 100644
> index 00000000..725d740b
> --- /dev/null
> +++ b/tests/xfs/770.out
> @@ -0,0 +1,2 @@
> +QA output created by 770
> +Silence is golden.
> diff --git a/tests/xfs/group b/tests/xfs/group
> index d1b1456b..461ae2b2 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -522,3 +522,5 @@
>  537 auto quick
>  538 auto stress
>  539 auto quick mount
> +768 auto quick repair
> +770 auto repair
>
diff mbox series

Patch

diff --git a/common/xfs b/common/xfs
index 2e78fd4f..ba6523ad 100644
--- a/common/xfs
+++ b/common/xfs
@@ -312,6 +312,14 @@  _scratch_xfs_check()
 	_xfs_check $SCRATCH_OPTIONS $* $SCRATCH_DEV
 }
 
+# Check for secret debugging hooks in xfs_repair
+_require_libxfs_debug_flag() {
+	local hook="$1"
+
+	grep -q "$hook" "$(type -P xfs_repair)" || \
+		_notrun "libxfs debug hook $hook not detected?"
+}
+
 _scratch_xfs_repair()
 {
 	SCRATCH_OPTIONS=""
@@ -1099,3 +1107,24 @@  _xfs_get_cowgc_interval() {
 		_fail "Can't find cowgc interval procfs knob?"
 	fi
 }
+
+# Print the status of the given features on the scratch filesystem.
+# Returns 0 if all features are found, 1 otherwise.
+_check_scratch_xfs_features()
+{
+	local features="$(_scratch_xfs_db -c 'version')"
+	local output=("FEATURES:")
+	local found=0
+
+	for feature in "$@"; do
+		local status="NO"
+		if echo "${features}" | grep -q -w "${feature}"; then
+			status="YES"
+			found=$((found + 1))
+		fi
+		output+=("${feature}:${status}")
+	done
+
+	echo "${output[@]}"
+	test "${found}" -eq "$#"
+}
diff --git a/tests/xfs/768 b/tests/xfs/768
new file mode 100755
index 00000000..84c54a6e
--- /dev/null
+++ b/tests/xfs/768
@@ -0,0 +1,80 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 768
+#
+# Make sure that the kernel won't mount a filesystem if repair forcibly sets
+# NEEDSREPAIR while fixing metadata.  Corrupt a directory in such a way as
+# to force repair to write an invalid dirent value as a sentinel to trigger a
+# repair activity in a later phase.  Use a debug knob in xfs_repair to abort
+# the repair immediately after forcing the flag on.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_scratch_nocheck
+_require_scratch_xfs_crc		# needsrepair only exists for v5
+_require_libxfs_debug_flag LIBXFS_DEBUG_WRITE_CRASH
+
+rm -f $seqres.full
+
+# Set up a real filesystem for our actual test
+_scratch_mkfs >> $seqres.full
+
+# Create a directory large enough to have a dir data block.  2k worth of
+# dirent names ought to do it.
+_scratch_mount
+mkdir -p $SCRATCH_MNT/fubar
+for i in $(seq 0 256 2048); do
+	fname=$(printf "%0255d" $i)
+	ln -s -f urk $SCRATCH_MNT/fubar/$fname
+done
+inum=$(stat -c '%i' $SCRATCH_MNT/fubar)
+_scratch_unmount
+
+# Fuzz the directory
+_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \
+	-c "fuzz -d bu[2].inumber add" >> $seqres.full
+
+# Try to repair the directory, force it to crash after setting needsrepair
+LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full
+test $? -eq 137 || echo "repair should have been killed??"
+
+# We can't mount, right?
+_check_scratch_xfs_features NEEDSREPAIR
+_try_scratch_mount &> $tmp.mount
+res=$?
+_filter_scratch < $tmp.mount
+if [ $res -eq 0 ]; then
+	echo "Should not be able to mount after needsrepair crash"
+	_scratch_unmount
+fi
+
+# Repair properly this time and retry the mount
+_scratch_xfs_repair 2>> $seqres.full
+_check_scratch_xfs_features NEEDSREPAIR
+
+_scratch_mount
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/768.out b/tests/xfs/768.out
new file mode 100644
index 00000000..1168ba25
--- /dev/null
+++ b/tests/xfs/768.out
@@ -0,0 +1,4 @@ 
+QA output created by 768
+FEATURES: NEEDSREPAIR:YES
+mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
+FEATURES: NEEDSREPAIR:NO
diff --git a/tests/xfs/770 b/tests/xfs/770
new file mode 100755
index 00000000..5265eaca
--- /dev/null
+++ b/tests/xfs/770
@@ -0,0 +1,91 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 770
+#
+# Populate a filesystem with all types of metadata, then run repair with the
+# libxfs write failure trigger set to go after a single write.  Check that the
+# injected error trips, causing repair to abort, that needsrepair is set on the
+# fs, the kernel won't mount; and that a non-injecting repair run clears
+# needsrepair and makes the filesystem mountable again.
+#
+# Repeat with the trip point set to successively higher numbers of writes until
+# we hit ~200 writes or repair manages to run to completion without tripping.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/populate
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_scratch_nocheck
+_require_scratch_xfs_crc		# needsrepair only exists for v5
+_require_populate_commands
+_require_libxfs_debug_flag LIBXFS_DEBUG_WRITE_CRASH
+
+rm -f $seqres.full
+
+# Populate the filesystem
+_scratch_populate_cached nofill >> $seqres.full 2>&1
+
+max_writes=200			# 200 loops should be enough for anyone
+nr_incr=$((13 / TIME_FACTOR))
+test $nr_incr -lt 1 && nr_incr=1
+for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do
+	# Add a tiny bit of randomness into each run
+	allowed_writes=$(( nr_writes + (RANDOM % 7) ))
+	echo "Setting debug hook to crash after $allowed_writes writes." >> $seqres.full
+
+	# Start a repair and force it to abort after some number of writes
+	LIBXFS_DEBUG_WRITE_CRASH=ddev=$allowed_writes \
+			_scratch_xfs_repair 2>> $seqres.full
+	res=$?
+	if [ $res -ne 0 ] && [ $res -ne 137 ]; then
+		echo "repair failed with $res??"
+		break
+	elif [ $res -eq 0 ]; then
+		[ $nr_writes -eq 1 ] && \
+			echo "ran to completion on the first try?"
+		break
+	fi
+
+	# Check the state of NEEDSREPAIR after repair fails.  If it isn't set
+	# but repair -n says the fs is clean, then it's possible that the
+	# injected error caused it to abort immediately after the write that
+	# cleared NEEDSREPAIR.
+	if ! _check_scratch_xfs_features NEEDSREPAIR > /dev/null &&
+	   ! _scratch_xfs_repair -n &>> $seqres.full; then
+		echo "NEEDSREPAIR should be set on corrupt fs"
+	fi
+done
+
+# If NEEDSREPAIR is still set on the filesystem, ensure that a full run
+# cleans everything up.
+if _check_scratch_xfs_features NEEDSREPAIR > /dev/null; then
+	echo "Clearing NEEDSREPAIR" >> $seqres.full
+	_scratch_xfs_repair 2>> $seqres.full
+	_check_scratch_xfs_features NEEDSREPAIR > /dev/null && \
+		echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test"
+fi
+
+# success, all done
+echo Silence is golden.
+status=0
+exit
diff --git a/tests/xfs/770.out b/tests/xfs/770.out
new file mode 100644
index 00000000..725d740b
--- /dev/null
+++ b/tests/xfs/770.out
@@ -0,0 +1,2 @@ 
+QA output created by 770
+Silence is golden.
diff --git a/tests/xfs/group b/tests/xfs/group
index d1b1456b..461ae2b2 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -522,3 +522,5 @@ 
 537 auto quick
 538 auto stress
 539 auto quick mount
+768 auto quick repair
+770 auto repair