| Message ID | 20220105195352.GM656707@magnolia (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfs/220: fix quotarm syscall test | expand |
on 2022/1/6 3:53, Darrick J. Wong wrote: > From: Darrick J. Wong<djwong@kernel.org> > > In commit 6ba125c9, we tried to adjust this fstest to deal with the > removal of the ability to turn off quota accounting via the Q_XQUOTAOFF > system call. > > Unfortunately, the changes made to this test make it nonfunctional on > those newer kernels, since the Q_XQUOTARM command returns EINVAL if > quota accounting is turned on, and the changes filter out the EINVAL > error string. > > Doing this wasn't /incorrect/, because, very narrowly speaking, the > intent of this test is to guard against Q_XQUOTARM returning ENOSYS when > quota has been enabled. However, this also means that we no longer test > Q_XQUOTARM's ability to truncate the quota files at all. > > So, fix this test to deal with the loss of quotaoff in the same way that > the others do -- if accounting is still enabled after the 'off' command, > cycle the mount so that Q_XQUOTARM actually truncates the files. > > While we're at it, enhance the test to check that XQUOTARM actually > truncated the quota files. > > Fixes: 6ba125c9 ("xfs/220: avoid failure when disabling quota accounting is not supported") > Signed-off-by: Darrick J. Wong<djwong@kernel.org> > --- > tests/xfs/220 | 28 +++++++++++++++++++++------- > 1 file changed, 21 insertions(+), 7 deletions(-) > > diff --git a/tests/xfs/220 b/tests/xfs/220 > index 241a7abd..cfa90d3a 100755 > --- a/tests/xfs/220 > +++ b/tests/xfs/220 > @@ -52,14 +52,28 @@ _scratch_mkfs_xfs>/dev/null 2>&1 > # mount with quotas enabled > _scratch_mount -o uquota > > -# turn off quota and remove space allocated to the quota files > +# turn off quota accounting... > +$XFS_QUOTA_PROG -x -c off $SCRATCH_DEV > + > +# ...but if the kernel doesn't support turning off accounting, remount with > +# noquota option to turn it off... > +if $XFS_QUOTA_PROG -x -c 'state -u' $SCRATCH_DEV | grep -q 'Accounting: ON'; then > + _scratch_unmount > + _scratch_mount -o noquota > +fi > + > +before_freesp=$(_get_available_space $SCRATCH_MNT) > + > +# ...and remove space allocated to the quota files > # (this used to give wrong ENOSYS returns in 2.6.31) > -# > -# The sed expression below replaces a notrun to cater for kernels that have > -# removed the ability to disable quota accounting at runtime. On those > -# kernel this test is rather useless, and in a few years we can drop it. > -$XFS_QUOTA_PROG -x -c off -c remove $SCRATCH_DEV 2>&1 | \ > - sed -e '/XFS_QUOTARM: Invalid argument/d' > +$XFS_QUOTA_PROG -x -c remove $SCRATCH_DEV > + > +# Make sure we actually freed the space used by dquot 0 > +after_freesp=$(_get_available_space $SCRATCH_MNT) > +if [ $before_freesp -ge $after_freesp ]; then > + echo "before: $before_freesp; after: $after_freesp">> $seqres.full I prefer to move this info outside the if. So even case pass, I still can see the difference in seqres.full. > + echo "expected more free space after Q_XQUOTARM" Do you forget to add this into 220.out? Also, I try this patch and add some output about delta. It seems before_value greater than after value. #Make sure we actually freed the space used by dquot 0 after_freesp=$(_get_available_space $SCRATCH_MNT) delta=$(($before_freesp - $after_freesp)) echo "before: $before_freesp; after: $after_freesp, delta: $delta" >> $seqres.full if [ $delta -ge 0 ]; then echo "expected more free space after Q_XQUOTARM" fi MOUNT_OPTIONS = -o defaults before: 21280804864; after: 21280808960, delta: -4096 Best Regards Yang Xu > +fi > > # and unmount again > _scratch_unmount
on 2022/1/6 9:34, xuyang2018.jy@fujitsu.com wrote: > on 2022/1/6 3:53, Darrick J. Wong wrote: >> From: Darrick J. Wong<djwong@kernel.org> >> >> In commit 6ba125c9, we tried to adjust this fstest to deal with the >> removal of the ability to turn off quota accounting via the Q_XQUOTAOFF >> system call. >> >> Unfortunately, the changes made to this test make it nonfunctional on >> those newer kernels, since the Q_XQUOTARM command returns EINVAL if >> quota accounting is turned on, and the changes filter out the EINVAL >> error string. >> >> Doing this wasn't /incorrect/, because, very narrowly speaking, the >> intent of this test is to guard against Q_XQUOTARM returning ENOSYS when >> quota has been enabled. However, this also means that we no longer test >> Q_XQUOTARM's ability to truncate the quota files at all. >> >> So, fix this test to deal with the loss of quotaoff in the same way that >> the others do -- if accounting is still enabled after the 'off' command, >> cycle the mount so that Q_XQUOTARM actually truncates the files. >> >> While we're at it, enhance the test to check that XQUOTARM actually >> truncated the quota files. >> >> Fixes: 6ba125c9 ("xfs/220: avoid failure when disabling quota accounting is not supported") >> Signed-off-by: Darrick J. Wong<djwong@kernel.org> >> --- >> tests/xfs/220 | 28 +++++++++++++++++++++------- >> 1 file changed, 21 insertions(+), 7 deletions(-) >> >> diff --git a/tests/xfs/220 b/tests/xfs/220 >> index 241a7abd..cfa90d3a 100755 >> --- a/tests/xfs/220 >> +++ b/tests/xfs/220 >> @@ -52,14 +52,28 @@ _scratch_mkfs_xfs>/dev/null 2>&1 >> # mount with quotas enabled >> _scratch_mount -o uquota >> >> -# turn off quota and remove space allocated to the quota files >> +# turn off quota accounting... >> +$XFS_QUOTA_PROG -x -c off $SCRATCH_DEV >> + >> +# ...but if the kernel doesn't support turning off accounting, remount with >> +# noquota option to turn it off... >> +if $XFS_QUOTA_PROG -x -c 'state -u' $SCRATCH_DEV | grep -q 'Accounting: ON'; then >> + _scratch_unmount >> + _scratch_mount -o noquota >> +fi >> + >> +before_freesp=$(_get_available_space $SCRATCH_MNT) >> + >> +# ...and remove space allocated to the quota files >> # (this used to give wrong ENOSYS returns in 2.6.31) >> -# >> -# The sed expression below replaces a notrun to cater for kernels that have >> -# removed the ability to disable quota accounting at runtime. On those >> -# kernel this test is rather useless, and in a few years we can drop it. >> -$XFS_QUOTA_PROG -x -c off -c remove $SCRATCH_DEV 2>&1 | \ >> - sed -e '/XFS_QUOTARM: Invalid argument/d' >> +$XFS_QUOTA_PROG -x -c remove $SCRATCH_DEV >> + >> +# Make sure we actually freed the space used by dquot 0 >> +after_freesp=$(_get_available_space $SCRATCH_MNT) >> +if [ $before_freesp -ge $after_freesp ]; then >> + echo "before: $before_freesp; after: $after_freesp">> $seqres.full > I prefer to move this info outside the if. So even case pass, I still > can see the difference in seqres.full. >> + echo "expected more free space after Q_XQUOTARM" > Do you forget to add this into 220.out? Sorry, _get_available_space is designed for free space. I misunderstand it. Just one nit, can we move the $seqres.full code outside the if? after_freesp=$(_get_available_space $SCRATCH_MNT) delta=$(($after_freesp - $before_freesp)) echo "before_freesp: $before_freesp; after_freesp: $after_freesp, delta: $delta" >> $seqres.full if [ $delta -le 0 ]; then echo "expected more free space after Q_XQUOTARM" fi Best Regards Yang Xu > > > Also, I try this patch and add some output about delta. > It seems before_value greater than after value. > > #Make sure we actually freed the space used by dquot 0 > after_freesp=$(_get_available_space $SCRATCH_MNT) > delta=$(($before_freesp - $after_freesp)) > echo "before: $before_freesp; after: $after_freesp, delta: $delta">> > $seqres.full > if [ $delta -ge 0 ]; then > echo "expected more free space after Q_XQUOTARM" > fi > > MOUNT_OPTIONS = -o defaults > before: 21280804864; after: 21280808960, delta: -4096 > > > Best Regards > Yang Xu >> +fi >> >> # and unmount again >> _scratch_unmount
On Thu, Jan 06, 2022 at 01:55:01AM +0000, xuyang2018.jy@fujitsu.com wrote: > on 2022/1/6 9:34, xuyang2018.jy@fujitsu.com wrote: > > on 2022/1/6 3:53, Darrick J. Wong wrote: > >> From: Darrick J. Wong<djwong@kernel.org> > >> > >> In commit 6ba125c9, we tried to adjust this fstest to deal with the > >> removal of the ability to turn off quota accounting via the Q_XQUOTAOFF > >> system call. > >> > >> Unfortunately, the changes made to this test make it nonfunctional on > >> those newer kernels, since the Q_XQUOTARM command returns EINVAL if > >> quota accounting is turned on, and the changes filter out the EINVAL > >> error string. > >> > >> Doing this wasn't /incorrect/, because, very narrowly speaking, the > >> intent of this test is to guard against Q_XQUOTARM returning ENOSYS when > >> quota has been enabled. However, this also means that we no longer test > >> Q_XQUOTARM's ability to truncate the quota files at all. > >> > >> So, fix this test to deal with the loss of quotaoff in the same way that > >> the others do -- if accounting is still enabled after the 'off' command, > >> cycle the mount so that Q_XQUOTARM actually truncates the files. > >> > >> While we're at it, enhance the test to check that XQUOTARM actually > >> truncated the quota files. > >> > >> Fixes: 6ba125c9 ("xfs/220: avoid failure when disabling quota accounting is not supported") > >> Signed-off-by: Darrick J. Wong<djwong@kernel.org> > >> --- > >> tests/xfs/220 | 28 +++++++++++++++++++++------- > >> 1 file changed, 21 insertions(+), 7 deletions(-) > >> > >> diff --git a/tests/xfs/220 b/tests/xfs/220 > >> index 241a7abd..cfa90d3a 100755 > >> --- a/tests/xfs/220 > >> +++ b/tests/xfs/220 > >> @@ -52,14 +52,28 @@ _scratch_mkfs_xfs>/dev/null 2>&1 > >> # mount with quotas enabled > >> _scratch_mount -o uquota > >> > >> -# turn off quota and remove space allocated to the quota files > >> +# turn off quota accounting... > >> +$XFS_QUOTA_PROG -x -c off $SCRATCH_DEV > >> + > >> +# ...but if the kernel doesn't support turning off accounting, remount with > >> +# noquota option to turn it off... > >> +if $XFS_QUOTA_PROG -x -c 'state -u' $SCRATCH_DEV | grep -q 'Accounting: ON'; then > >> + _scratch_unmount > >> + _scratch_mount -o noquota > >> +fi > >> + > >> +before_freesp=$(_get_available_space $SCRATCH_MNT) > >> + > >> +# ...and remove space allocated to the quota files > >> # (this used to give wrong ENOSYS returns in 2.6.31) > >> -# > >> -# The sed expression below replaces a notrun to cater for kernels that have > >> -# removed the ability to disable quota accounting at runtime. On those > >> -# kernel this test is rather useless, and in a few years we can drop it. > >> -$XFS_QUOTA_PROG -x -c off -c remove $SCRATCH_DEV 2>&1 | \ > >> - sed -e '/XFS_QUOTARM: Invalid argument/d' > >> +$XFS_QUOTA_PROG -x -c remove $SCRATCH_DEV > >> + > >> +# Make sure we actually freed the space used by dquot 0 > >> +after_freesp=$(_get_available_space $SCRATCH_MNT) > >> +if [ $before_freesp -ge $after_freesp ]; then > >> + echo "before: $before_freesp; after: $after_freesp">> $seqres.full > > I prefer to move this info outside the if. So even case pass, I still > > can see the difference in seqres.full. > >> + echo "expected more free space after Q_XQUOTARM" > > Do you forget to add this into 220.out? > Sorry, _get_available_space is designed for free space. I misunderstand it. > > Just one nit, can we move the $seqres.full code outside the if? > > after_freesp=$(_get_available_space $SCRATCH_MNT) > delta=$(($after_freesp - $before_freesp)) > echo "before_freesp: $before_freesp; after_freesp: $after_freesp, delta: > $delta" >> $seqres.full > if [ $delta -le 0 ]; then > echo "expected more free space after Q_XQUOTARM" > fi Yes, I'll do that. --D > Best Regards > Yang Xu > > > > > > Also, I try this patch and add some output about delta. > > It seems before_value greater than after value. > > > > #Make sure we actually freed the space used by dquot 0 > > after_freesp=$(_get_available_space $SCRATCH_MNT) > > delta=$(($before_freesp - $after_freesp)) > > echo "before: $before_freesp; after: $after_freesp, delta: $delta">> > > $seqres.full > > if [ $delta -ge 0 ]; then > > echo "expected more free space after Q_XQUOTARM" > > fi > > > > MOUNT_OPTIONS = -o defaults > > before: 21280804864; after: 21280808960, delta: -4096 > > > > > > Best Regards > > Yang Xu > >> +fi > >> > >> # and unmount again > >> _scratch_unmount
diff --git a/tests/xfs/220 b/tests/xfs/220 index 241a7abd..cfa90d3a 100755 --- a/tests/xfs/220 +++ b/tests/xfs/220 @@ -52,14 +52,28 @@ _scratch_mkfs_xfs >/dev/null 2>&1 # mount with quotas enabled _scratch_mount -o uquota -# turn off quota and remove space allocated to the quota files +# turn off quota accounting... +$XFS_QUOTA_PROG -x -c off $SCRATCH_DEV + +# ...but if the kernel doesn't support turning off accounting, remount with +# noquota option to turn it off... +if $XFS_QUOTA_PROG -x -c 'state -u' $SCRATCH_DEV | grep -q 'Accounting: ON'; then + _scratch_unmount + _scratch_mount -o noquota +fi + +before_freesp=$(_get_available_space $SCRATCH_MNT) + +# ...and remove space allocated to the quota files # (this used to give wrong ENOSYS returns in 2.6.31) -# -# The sed expression below replaces a notrun to cater for kernels that have -# removed the ability to disable quota accounting at runtime. On those -# kernel this test is rather useless, and in a few years we can drop it. -$XFS_QUOTA_PROG -x -c off -c remove $SCRATCH_DEV 2>&1 | \ - sed -e '/XFS_QUOTARM: Invalid argument/d' +$XFS_QUOTA_PROG -x -c remove $SCRATCH_DEV + +# Make sure we actually freed the space used by dquot 0 +after_freesp=$(_get_available_space $SCRATCH_MNT) +if [ $before_freesp -ge $after_freesp ]; then + echo "before: $before_freesp; after: $after_freesp" >> $seqres.full + echo "expected more free space after Q_XQUOTARM" +fi # and unmount again _scratch_unmount