| Message ID | 20220708085142.20991-6-ddiss@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | check: add option to rerun failed tests | expand |
On Fri, Jul 08, 2022 at 10:51:42AM +0200, David Disseldorp wrote: > If check is run with -L <n>, then a failed test will be rerun <n> times > before proceeding to the next test. Following completion of the rerun > loop, aggregate pass/fail statistics are printed. > > Rerun tests will be tracked as a single failure in overall pass/fail > metrics (via @try and @bad), with .out.bad, .dmesg, .core, .hints, > .notrun and .full saved using a .rerun# suffix. > > Suggested-by: Theodore Ts'o <tytso@mit.edu> > Link: https://lwn.net/Articles/897061/ > Signed-off-by: David Disseldorp <ddiss@suse.de> Looks good! Reviewed-by: Darrick J. Wong <djwong@kernel.org> --D > --- > check | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--- > 1 file changed, 54 insertions(+), 3 deletions(-) > > diff --git a/check b/check > index 6dbdb2a8..5f6d86b4 100755 > --- a/check > +++ b/check > @@ -26,6 +26,7 @@ do_report=false > DUMP_OUTPUT=false > iterations=1 > istop=false > +loop_on_fail=0 > > # This is a global variable used to pass test failure text to reporting gunk > _err_msg="" > @@ -78,6 +79,7 @@ check options > --large-fs optimise scratch device for large filesystems > -s section run only specified section from config file > -S section exclude the specified section from the config file > + -L <n> loop tests <n> times following a failure, measuring aggregate pass/fail metrics > > testlist options > -g group[,group...] include tests from these groups > @@ -336,6 +338,9 @@ while [ $# -gt 0 ]; do > ;; > --large-fs) export LARGE_SCRATCH_DEV=yes ;; > --extra-space=*) export SCRATCH_DEV_EMPTY_SPACE=${r#*=} ;; > + -L) [[ $2 =~ ^[0-9]+$ ]] || usage > + loop_on_fail=$2; shift > + ;; > > -*) usage ;; > *) # not an argument, we've got tests now. > @@ -553,6 +558,19 @@ _expunge_test() > return 0 > } > > +# retain files which would be overwritten in subsequent reruns of the same test > +_stash_fail_loop_files() { > + local seq_prefix="${REPORT_DIR}/${1}" > + local cp_suffix="$2" > + > + for i in ".full" ".dmesg" ".out.bad" ".notrun" ".core" ".hints"; do > + rm -f "${seq_prefix}${i}${cp_suffix}" > + if [ -f "${seq_prefix}${i}" ]; then > + cp "${seq_prefix}${i}" "${seq_prefix}${i}${cp_suffix}" > + fi > + done > +} > + > # Retain in @bad / @notrun the result of the just-run @test_seq. @try array > # entries are added prior to execution. > _stash_test_status() { > @@ -564,8 +582,35 @@ _stash_test_status() { > "$test_status" "$((stop - start))" > fi > > + if ((${#loop_status[*]} > 0)); then > + # continuing or completing rerun-on-failure loop > + _stash_fail_loop_files "$test_seq" ".rerun${#loop_status[*]}" > + loop_status+=("$test_status") > + if ((${#loop_status[*]} > loop_on_fail)); then > + printf "%s aggregate results across %d runs: " \ > + "$test_seq" "${#loop_status[*]}" > + awk "BEGIN { > + n=split(\"${loop_status[*]}\", arr);"' > + for (i = 1; i <= n; i++) > + stats[arr[i]]++; > + for (x in stats) > + printf("%s=%d (%.1f%%)", > + (i-- > n ? x : ", " x), > + stats[x], 100 * stats[x] / n); > + }' > + echo > + loop_status=() > + fi > + return # only stash @bad result for initial failure in loop > + fi > + > case "$test_status" in > fail) > + if ((loop_on_fail > 0)); then > + # initial failure, start rerun-on-failure loop > + _stash_fail_loop_files "$test_seq" ".rerun0" > + loop_status+=("$test_status") > + fi > bad+=("$test_seq") > ;; > list|notrun) > @@ -758,8 +803,12 @@ function run_section() > seqres="$check" > _check_test_fs > > - local tc_status > - for seq in $list ; do > + loop_status=() # track rerun-on-failure state > + local tc_status ix > + local -a _list=( $list ) > + for ((ix = 0; ix < ${#_list[*]}; !${#loop_status[*]} && ix++)); do > + seq="${_list[$ix]}" > + > if [ ! -f $seq ]; then > # Try to get full name in case the user supplied only > # seq id and the test has a name. A bit of hassle to > @@ -829,7 +878,9 @@ function run_section() > fi > > # record that we really tried to run this test. > - try+=("$seqnum") > + if ((!${#loop_status[*]})); then > + try+=("$seqnum") > + fi > > awk 'BEGIN {lasttime=" "} \ > $1 == "'$seqnum'" {lasttime=" " $2 "s ... "; exit} \ > -- > 2.35.3 >
diff --git a/check b/check index 6dbdb2a8..5f6d86b4 100755 --- a/check +++ b/check @@ -26,6 +26,7 @@ do_report=false DUMP_OUTPUT=false iterations=1 istop=false +loop_on_fail=0 # This is a global variable used to pass test failure text to reporting gunk _err_msg="" @@ -78,6 +79,7 @@ check options --large-fs optimise scratch device for large filesystems -s section run only specified section from config file -S section exclude the specified section from the config file + -L <n> loop tests <n> times following a failure, measuring aggregate pass/fail metrics testlist options -g group[,group...] include tests from these groups @@ -336,6 +338,9 @@ while [ $# -gt 0 ]; do ;; --large-fs) export LARGE_SCRATCH_DEV=yes ;; --extra-space=*) export SCRATCH_DEV_EMPTY_SPACE=${r#*=} ;; + -L) [[ $2 =~ ^[0-9]+$ ]] || usage + loop_on_fail=$2; shift + ;; -*) usage ;; *) # not an argument, we've got tests now. @@ -553,6 +558,19 @@ _expunge_test() return 0 } +# retain files which would be overwritten in subsequent reruns of the same test +_stash_fail_loop_files() { + local seq_prefix="${REPORT_DIR}/${1}" + local cp_suffix="$2" + + for i in ".full" ".dmesg" ".out.bad" ".notrun" ".core" ".hints"; do + rm -f "${seq_prefix}${i}${cp_suffix}" + if [ -f "${seq_prefix}${i}" ]; then + cp "${seq_prefix}${i}" "${seq_prefix}${i}${cp_suffix}" + fi + done +} + # Retain in @bad / @notrun the result of the just-run @test_seq. @try array # entries are added prior to execution. _stash_test_status() { @@ -564,8 +582,35 @@ _stash_test_status() { "$test_status" "$((stop - start))" fi + if ((${#loop_status[*]} > 0)); then + # continuing or completing rerun-on-failure loop + _stash_fail_loop_files "$test_seq" ".rerun${#loop_status[*]}" + loop_status+=("$test_status") + if ((${#loop_status[*]} > loop_on_fail)); then + printf "%s aggregate results across %d runs: " \ + "$test_seq" "${#loop_status[*]}" + awk "BEGIN { + n=split(\"${loop_status[*]}\", arr);"' + for (i = 1; i <= n; i++) + stats[arr[i]]++; + for (x in stats) + printf("%s=%d (%.1f%%)", + (i-- > n ? x : ", " x), + stats[x], 100 * stats[x] / n); + }' + echo + loop_status=() + fi + return # only stash @bad result for initial failure in loop + fi + case "$test_status" in fail) + if ((loop_on_fail > 0)); then + # initial failure, start rerun-on-failure loop + _stash_fail_loop_files "$test_seq" ".rerun0" + loop_status+=("$test_status") + fi bad+=("$test_seq") ;; list|notrun) @@ -758,8 +803,12 @@ function run_section() seqres="$check" _check_test_fs - local tc_status - for seq in $list ; do + loop_status=() # track rerun-on-failure state + local tc_status ix + local -a _list=( $list ) + for ((ix = 0; ix < ${#_list[*]}; !${#loop_status[*]} && ix++)); do + seq="${_list[$ix]}" + if [ ! -f $seq ]; then # Try to get full name in case the user supplied only # seq id and the test has a name. A bit of hassle to @@ -829,7 +878,9 @@ function run_section() fi # record that we really tried to run this test. - try+=("$seqnum") + if ((!${#loop_status[*]})); then + try+=("$seqnum") + fi awk 'BEGIN {lasttime=" "} \ $1 == "'$seqnum'" {lasttime=" " $2 "s ... "; exit} \
If check is run with -L <n>, then a failed test will be rerun <n> times before proceeding to the next test. Following completion of the rerun loop, aggregate pass/fail statistics are printed. Rerun tests will be tracked as a single failure in overall pass/fail metrics (via @try and @bad), with .out.bad, .dmesg, .core, .hints, .notrun and .full saved using a .rerun# suffix. Suggested-by: Theodore Ts'o <tytso@mit.edu> Link: https://lwn.net/Articles/897061/ Signed-off-by: David Disseldorp <ddiss@suse.de> --- check | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 3 deletions(-)