[v2,10/10] generic/575: test 1K Merkle tree block size

Commit Message

Eric Biggers Dec. 23, 2022, 1:05 a.m. UTC

From: Eric Biggers <[e-mail]>

In addition to 4K, test 1K Merkle tree blocks.  Also always run this
test, regardless of FSV_BLOCK_SIZE, but allow skipping tests of
parameters that are unsupported, unless they are the default.

Signed-off-by: Eric Biggers <[e-mail]>
---
 tests/generic/575     | 57 +++++++++++++++++++++++++++++++------------
 tests/generic/575.out |  8 ++++--
 2 files changed, 47 insertions(+), 18 deletions(-)

Patch

diff --git a/tests/generic/575 b/tests/generic/575
index 0ece8826..344fd2b9 100755
--- a/tests/generic/575
+++ b/tests/generic/575
@@ -4,7 +4,7 @@ 
 #
 # FS QA Test generic/575
 #
-# Test that fs-verity is using the correct measurement values.  This test
+# Test that fs-verity is using the correct file digest values.  This test
 # verifies that fs-verity is doing its Merkle tree-based hashing correctly,
 # i.e. that it hasn't been broken by a change.
 #
@@ -26,9 +26,6 @@  _cleanup()
 # real QA test starts here
 _supported_fs generic
 _require_scratch_verity
-if [ $FSV_BLOCK_SIZE != 4096 ]; then
-	_notrun "4096-byte verity block size not supported on this platform"
-fi
 _disable_fsverity_signatures
 
 _scratch_mkfs_verity &>> $seqres.full
@@ -36,24 +33,42 @@  _scratch_mount
 fsv_orig_file=$SCRATCH_MNT/file
 fsv_file=$SCRATCH_MNT/file.fsv
 
+# Try multiple hash algorithms.
 algs=(sha256 sha512)
 
+# Try multiple Merkle tree block sizes.
+block_sizes=(1024 4096)
+
 # Try files with 0, 1, and multiple Merkle tree levels.
 file_sizes=(0 4096 65536 65536 100000000)
 
 # Try both unsalted and salted, and check that empty salt is the same as no salt
 salts=('' '' '' '--salt=' '--salt=f3c93fa6fb828c0e1587e5714ecf6f56')
 
-# The expected file measurements are here rather than in the expected output
-# file because not all hash algorithms may be available.
-sha256_vals=(
+# The expected file digests are here rather than in the expected output file
+# because the kernel might not support all hash algorithms and block sizes.
+sha256_vals_bsize1024=(
+sha256:f2cca36b9b1b7f07814e4284b10121809133e7cb9c4528c8f6846e85fc624ffa
+sha256:ea08590a4fe9c3d6c9dafe0eedacd9dffff8f24e24f1865ee3af132a495ab087
+sha256:527496288d703686e31092f5cca7e1306b2467f00b247ad01056ee5ec35a4bb9
+sha256:527496288d703686e31092f5cca7e1306b2467f00b247ad01056ee5ec35a4bb9
+sha256:087818b23312acb15dff9ff6e2b4f601406d08bb36013542444cc15248f47016
+)
+sha256_vals_bsize4096=(
 sha256:3d248ca542a24fc62d1c43b916eae5016878e2533c88238480b26128a1f1af95
 sha256:babc284ee4ffe7f449377fbf6692715b43aec7bc39c094a95878904d34bac97e
 sha256:011e3f2b1dc89b75d78cddcc2a1b85cd8a64b2883e5f20f277ae4c0617e0404f
 sha256:011e3f2b1dc89b75d78cddcc2a1b85cd8a64b2883e5f20f277ae4c0617e0404f
 sha256:9d33cab743468fcbe4edab91a275b30dd543c12dd5e6ce6f2f737f66a1558f06
 )
-sha512_vals=(
+sha512_vals_bsize1024=(
+sha512:8451664f25b2ad3f24391280e0c5681cb843389c180baa719f8fdfb063f5ddfa2d1c4433e55e2b6fbb3ba6aa2df8a4f41bf56cb7e0a3b617b6919a42c80f034c
+sha512:ab3c6444ab377bbe54c604c26cad241b146d85dc29727703a0d8134f70a8172fb3fa67d171355106b69cc0a9e7e9debb335f9461b3aba44093914867f7c73233
+sha512:e6a11353c24dd7b4603cb8ffa50a7041dbea7382d4698474ccbc2d8b34f3a83d8bf16df25c64ed31ee27213a8a3cbd001fb1ccde46384c23b81305c2393c1046
+sha512:e6a11353c24dd7b4603cb8ffa50a7041dbea7382d4698474ccbc2d8b34f3a83d8bf16df25c64ed31ee27213a8a3cbd001fb1ccde46384c23b81305c2393c1046
+sha512:517d573bd50d5f3787f5766c2ac60c7af854b0901b69757b4ef8dd70aa6b30fcc10d81629ce923bdd062a01c20fad0f063a081a2f3b0814ac06547b26bedc0d9
+)
+sha512_vals_bsize4096=(
 sha512:ccf9e5aea1c2a64efa2f2354a6024b90dffde6bbc017825045dce374474e13d10adb9dadcc6ca8e17a3c075fbd31336e8f266ae6fa93a6c3bed66f9e784e5abf
 sha512:928922686c4caf32175f5236a7f964e9925d10a74dc6d8344a8bd08b23c228ff5792573987d7895f628f39c4f4ebe39a7367d7aeb16aaa0cd324ac1d53664e61
 sha512:eab7224ce374a0a4babcb2db25e24836247f38b87806ad9be9e5ba4daac2f5b814fc0cbdfd9f1f8499b3c9a6c1b38fe08974cce49883ab4ccd04462fd2f9507f
@@ -61,20 +76,27 @@  sha512:eab7224ce374a0a4babcb2db25e24836247f38b87806ad9be9e5ba4daac2f5b814fc0cbdf
 sha512:f7083a38644880d25539488313e9e5b41a4d431a0e383945129ad2c36e3c1d0f28928a424641bb1363c12b6e770578102566acea73baf1ce8ee15336f5ba2446
 )
 
-test_alg()
+test_alg_with_block_size()
 {
 	local alg=$1
-	local -n vals=${alg}_vals
+	local block_size=$2
+	local -n vals=${alg}_vals_bsize${block_size}
 	local i
 	local file_size
 	local expected actual salt_arg
 
-	_fsv_scratch_begin_subtest "Check for expected measurement values ($alg)"
+	_fsv_scratch_begin_subtest "Testing alg=$alg, block_size=$block_size if supported"
 
-	if ! _fsv_can_enable $fsv_file --hash-alg=$alg; then
-		if [ "$alg" = sha256 ]; then
-			_fail "Something is wrong - sha256 hash should always be available"
+	if ! _fsv_can_enable $fsv_file --hash-alg=$alg --block-size=$block_size
+	then
+		# Since this is after _require_scratch_verity, sha256 with
+		# FSV_BLOCK_SIZE must be supported.
+		if [ "$alg" = "sha256" -a "$block_size" = "$FSV_BLOCK_SIZE" ]
+		then
+			_fail "Failed to enable verity with default params"
 		fi
+		# This combination of parameters is unsupported; skip it.
+		echo "alg=$alg, block_size=$block_size is unsupported" >> $seqres.full
 		return 0
 	fi
 
@@ -85,7 +107,8 @@  test_alg()
 
 		head -c $file_size /dev/zero > $fsv_orig_file
 		cp $fsv_orig_file $fsv_file
-		_fsv_enable --hash-alg=$alg $salt_arg $fsv_file
+		_fsv_enable $fsv_file --hash-alg=$alg --block-size=$block_size \
+			$salt_arg
 		actual=$(_fsv_measure $fsv_file)
 		if [ "$actual" != "$expected" ]; then
 			echo "Mismatch: expected $expected, kernel calculated $actual (file_size=$file_size)"
@@ -96,7 +119,9 @@  test_alg()
 }
 
 for alg in ${algs[@]}; do
-	test_alg $alg
+	for block_size in ${block_sizes[@]}; do
+		test_alg_with_block_size $alg $block_size
+	done
 done
 
 # success, all done
diff --git a/tests/generic/575.out b/tests/generic/575.out
index 77bec43e..5ad70773 100644
--- a/tests/generic/575.out
+++ b/tests/generic/575.out
@@ -1,5 +1,9 @@ 
 QA output created by 575
 
-# Check for expected measurement values (sha256)
+# Testing alg=sha256, block_size=1024 if supported
 
-# Check for expected measurement values (sha512)
+# Testing alg=sha256, block_size=4096 if supported
+
+# Testing alg=sha512, block_size=1024 if supported
+
+# Testing alg=sha512, block_size=4096 if supported