diff mbox series

overlay: add test for persistent unique fsid

Message ID 20230903075411.2596590-1-amir73il@gmail.com (mailing list archive)
State New, archived
Headers show
Series overlay: add test for persistent unique fsid | expand

Commit Message

Amir Goldstein Sept. 3, 2023, 7:54 a.m. UTC
Test overlayfs fsid behavior with new mount options uuid=null/on
that were introduced in kernel v6.6:

- Test inherited upper fs fsid with mount option uuid=off/null
- Test uuid=null behavior for existing overlayfs by default
- Test persistent unique fsid with mount option uuid=on
- Test uuid=on behavior for new overlayfs by default

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
---

Zorro,

This is the functional test for an overlayfs feature merged to v6.6.
The test does _notrun on older kernels:

overlay/081 14s ...  [07:40:13][   57.780790] overlay: Bad value for 'uuid'
 [07:40:14] [not run]
	overlay/081 -- Overlayfs does not support unique fsid feature

The test for another big overlayfs feature that was merged to v6.6,
overlay/080 (validate lower using fs-verity) is already merged to fstests.

Note that overlay/080 requires running overlayfs over a base filesystem
with fs-verity support enabled, for example, on ext4 formatted with
mkfs.ext4 -O verity [1].

Thanks,
Amir.

[1] https://lore.kernel.org/fstests/20230625135033.3205742-2-amir73il@gmail.com/

 tests/overlay/081     | 128 ++++++++++++++++++++++++++++++++++++++++++
 tests/overlay/081.out |   2 +
 2 files changed, 130 insertions(+)
 create mode 100755 tests/overlay/081
 create mode 100644 tests/overlay/081.out

Comments

Zorro Lang Sept. 13, 2023, 4:23 p.m. UTC | #1
On Sun, Sep 03, 2023 at 10:54:11AM +0300, Amir Goldstein wrote:
> Test overlayfs fsid behavior with new mount options uuid=null/on
> that were introduced in kernel v6.6:
> 
> - Test inherited upper fs fsid with mount option uuid=off/null
> - Test uuid=null behavior for existing overlayfs by default
> - Test persistent unique fsid with mount option uuid=on
> - Test uuid=on behavior for new overlayfs by default
> 
> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
> ---

It looks good to me, as there's not objection, I'd like to merge this test
case in next release.

Reviewed-by: Zorro Lang <zlang@redhat.com>

> 
> Zorro,
> 
> This is the functional test for an overlayfs feature merged to v6.6.
> The test does _notrun on older kernels:
> 
> overlay/081 14s ...  [07:40:13][   57.780790] overlay: Bad value for 'uuid'
>  [07:40:14] [not run]
> 	overlay/081 -- Overlayfs does not support unique fsid feature
> 
> The test for another big overlayfs feature that was merged to v6.6,
> overlay/080 (validate lower using fs-verity) is already merged to fstests.
> 
> Note that overlay/080 requires running overlayfs over a base filesystem
> with fs-verity support enabled, for example, on ext4 formatted with
> mkfs.ext4 -O verity [1].
> 
> Thanks,
> Amir.
> 
> [1] https://lore.kernel.org/fstests/20230625135033.3205742-2-amir73il@gmail.com/
> 
>  tests/overlay/081     | 128 ++++++++++++++++++++++++++++++++++++++++++
>  tests/overlay/081.out |   2 +
>  2 files changed, 130 insertions(+)
>  create mode 100755 tests/overlay/081
>  create mode 100644 tests/overlay/081.out
> 
> diff --git a/tests/overlay/081 b/tests/overlay/081
> new file mode 100755
> index 00000000..05156a3c
> --- /dev/null
> +++ b/tests/overlay/081
> @@ -0,0 +1,128 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2023 CTERA Networks. All Rights Reserved.
> +#
> +# FSQA Test No. 081
> +#
> +# Test persistent (and optionally unique) overlayfs fsid
> +# with mount options uuid=null/on introduced in kernel v6.6
> +#
> +. ./common/preamble
> +_begin_fstest auto quick
> +
> +# Import common functions.
> +. ./common/filter
> +. ./common/attr
> +
> +# real QA test starts here
> +_supported_fs overlay
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +
> +# Create overlay layer with pre-packaged merge dir
> +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
> +workdir=$OVL_BASE_SCRATCH_MNT/$OVL_WORK
> +lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
> +mkdir -p $upperdir/test_dir
> +mkdir -p $lowerdir/test_dir
> +test_dir=$SCRATCH_MNT/test_dir/
> +
> +# Record base fs fsid
> +upper_fsid=$(stat -f -c '%i' $upperdir)
> +lower_fsid=$(stat -f -c '%i' $lowerdir)
> +
> +# Sanity tests
> +[[ -n "$upper_fsid" ]] || \
> +	echo "invalid upper fs fsid"
> +[[ "$lower_fsid" == "$upper_fsid" ]] || \
> +	echo "lower fs and upper fs fsid differ"
> +
> +# Test legacy behavior - ovl fsid inherited from upper fs
> +_overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o uuid=null 2>/dev/null || \
> +	_notrun "Overlayfs does not support unique fsid feature"
> +
> +# Lookup of test_dir marks upper root as "impure", so following (uuid=auto) mounts
> +# will NOT behave as first time mount of a new overlayfs
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$upper_fsid" ]] || \
> +	echo "Overlayfs (uuid=null) and upper fs fsid differ"
> +
> +# Keep base fs mounted in case it has a volatile fsid (e.g. tmpfs)
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test legacy behavior is preserved by default for existing "impure" overlayfs
> +_scratch_mount
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$upper_fsid" ]] || \
> +	echo "Overlayfs (uuid=auto) and upper fs fsid differ"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test unique fsid on explicit opt-in for existing "impure" overlayfs
> +_scratch_mount -o uuid=on
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +ovl_unique_fsid=$ovl_fsid
> +[[ "$ovl_fsid" != "$upper_fsid" ]] || \
> +	echo "Overlayfs (uuid=on) and upper fs fsid are the same"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test unique fsid is persistent by default after it was created
> +_scratch_mount
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
> +	echo "Overlayfs (uuid=auto) unique fsid is not persistent"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test ignore existing persistent fsid on explicit opt-out
> +_scratch_mount -o uuid=off
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$upper_fsid" ]] || \
> +	echo "Overlayfs (uuid=off) and upper fs fsid differ"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test fallback to uuid=null with non-upper ovelray
> +_overlay_scratch_mount_dirs "$upperdir:$lowerdir" "-" "-" -o ro,uuid=on
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$lower_fsid" ]] || \
> +	echo "Overlayfs (uuid=null) and lower fs fsid differ"
> +
> +# Re-create fresh overlay layers, so following (uuid=auto) mounts
> +# will behave as first time mount of a new overlayfs
> +_scratch_unmount
> +_scratch_mkfs >>$seqres.full 2>&1
> +mkdir -p $upperdir/test_dir
> +mkdir -p $lowerdir/test_dir
> +
> +# Record new base fs fsid
> +upper_fsid=$(stat -f -c '%i' $upperdir)
> +
> +# Test unique fsid by default for first time mount of new overlayfs
> +_scratch_mount
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +ovl_unique_fsid=$ovl_fsid
> +[[ "$ovl_fsid" != "$upper_fsid" ]] || \
> +	echo "Overlayfs (uuid=auto) and upper fs fsid are the same"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +# Test unique fsid is persistent by default after it was created
> +_scratch_mount -o uuid=on
> +
> +ovl_fsid=$(stat -f -c '%i' $test_dir)
> +[[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
> +	echo "Overlayfs (uuid=on) unique fsid is not persistent"
> +
> +$UMOUNT_PROG $SCRATCH_MNT
> +
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/overlay/081.out b/tests/overlay/081.out
> new file mode 100644
> index 00000000..663a8864
> --- /dev/null
> +++ b/tests/overlay/081.out
> @@ -0,0 +1,2 @@
> +QA output created by 081
> +Silence is golden
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/tests/overlay/081 b/tests/overlay/081
new file mode 100755
index 00000000..05156a3c
--- /dev/null
+++ b/tests/overlay/081
@@ -0,0 +1,128 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2023 CTERA Networks. All Rights Reserved.
+#
+# FSQA Test No. 081
+#
+# Test persistent (and optionally unique) overlayfs fsid
+# with mount options uuid=null/on introduced in kernel v6.6
+#
+. ./common/preamble
+_begin_fstest auto quick
+
+# Import common functions.
+. ./common/filter
+. ./common/attr
+
+# real QA test starts here
+_supported_fs overlay
+
+_scratch_mkfs >>$seqres.full 2>&1
+
+# Create overlay layer with pre-packaged merge dir
+upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
+workdir=$OVL_BASE_SCRATCH_MNT/$OVL_WORK
+lowerdir=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
+mkdir -p $upperdir/test_dir
+mkdir -p $lowerdir/test_dir
+test_dir=$SCRATCH_MNT/test_dir/
+
+# Record base fs fsid
+upper_fsid=$(stat -f -c '%i' $upperdir)
+lower_fsid=$(stat -f -c '%i' $lowerdir)
+
+# Sanity tests
+[[ -n "$upper_fsid" ]] || \
+	echo "invalid upper fs fsid"
+[[ "$lower_fsid" == "$upper_fsid" ]] || \
+	echo "lower fs and upper fs fsid differ"
+
+# Test legacy behavior - ovl fsid inherited from upper fs
+_overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o uuid=null 2>/dev/null || \
+	_notrun "Overlayfs does not support unique fsid feature"
+
+# Lookup of test_dir marks upper root as "impure", so following (uuid=auto) mounts
+# will NOT behave as first time mount of a new overlayfs
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$upper_fsid" ]] || \
+	echo "Overlayfs (uuid=null) and upper fs fsid differ"
+
+# Keep base fs mounted in case it has a volatile fsid (e.g. tmpfs)
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test legacy behavior is preserved by default for existing "impure" overlayfs
+_scratch_mount
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$upper_fsid" ]] || \
+	echo "Overlayfs (uuid=auto) and upper fs fsid differ"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test unique fsid on explicit opt-in for existing "impure" overlayfs
+_scratch_mount -o uuid=on
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+ovl_unique_fsid=$ovl_fsid
+[[ "$ovl_fsid" != "$upper_fsid" ]] || \
+	echo "Overlayfs (uuid=on) and upper fs fsid are the same"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test unique fsid is persistent by default after it was created
+_scratch_mount
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
+	echo "Overlayfs (uuid=auto) unique fsid is not persistent"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test ignore existing persistent fsid on explicit opt-out
+_scratch_mount -o uuid=off
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$upper_fsid" ]] || \
+	echo "Overlayfs (uuid=off) and upper fs fsid differ"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test fallback to uuid=null with non-upper ovelray
+_overlay_scratch_mount_dirs "$upperdir:$lowerdir" "-" "-" -o ro,uuid=on
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$lower_fsid" ]] || \
+	echo "Overlayfs (uuid=null) and lower fs fsid differ"
+
+# Re-create fresh overlay layers, so following (uuid=auto) mounts
+# will behave as first time mount of a new overlayfs
+_scratch_unmount
+_scratch_mkfs >>$seqres.full 2>&1
+mkdir -p $upperdir/test_dir
+mkdir -p $lowerdir/test_dir
+
+# Record new base fs fsid
+upper_fsid=$(stat -f -c '%i' $upperdir)
+
+# Test unique fsid by default for first time mount of new overlayfs
+_scratch_mount
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+ovl_unique_fsid=$ovl_fsid
+[[ "$ovl_fsid" != "$upper_fsid" ]] || \
+	echo "Overlayfs (uuid=auto) and upper fs fsid are the same"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+# Test unique fsid is persistent by default after it was created
+_scratch_mount -o uuid=on
+
+ovl_fsid=$(stat -f -c '%i' $test_dir)
+[[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
+	echo "Overlayfs (uuid=on) unique fsid is not persistent"
+
+$UMOUNT_PROG $SCRATCH_MNT
+
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/overlay/081.out b/tests/overlay/081.out
new file mode 100644
index 00000000..663a8864
--- /dev/null
+++ b/tests/overlay/081.out
@@ -0,0 +1,2 @@ 
+QA output created by 081
+Silence is golden