| Message ID | 20240615002935.1033031-3-mcgrof@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | fstests: add some new LBS inspired tests | expand |
On Fri, Jun 14, 2024 at 05:29:31PM -0700, Luis Chamberlain wrote: > mmap() POSIX compliance says we should zero fill data beyond a file > size up to page boundary, and issue a SIGBUS if we go beyond. While fsx > helps us test zero-fill sometimes, fsstress also let's us sometimes test > for SIGBUS however that is based on a random value and its not likely we > always test it. Dedicate a specic test for this to make testing for > this specific situation and to easily expand on other corner cases. > > The only filesystem currently known to fail is tmpfs with huge pages on > a 4k base page size system, on 64k base page size it does not fail. > The pending upstream patch "filemap: cap PTE range to be created to > allowed zero fill in folio_map_range()" fixes this issue for tmpfs on > 4k base page size with huge pages and it also fixes it for LBS support. > > Suggested-by: Matthew Wilcox <willy@infradead.org> > Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> > Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> > --- Good to me, Reviewed-by: Zorro Lang <zlang@redhat.com> > common/rc | 5 +- > tests/generic/749 | 256 ++++++++++++++++++++++++++++++++++++++++++ > tests/generic/749.out | 2 + > 3 files changed, 262 insertions(+), 1 deletion(-) > create mode 100755 tests/generic/749 > create mode 100644 tests/generic/749.out > > diff --git a/common/rc b/common/rc > index fa7942809d6c..e812a2f7cc67 100644 > --- a/common/rc > +++ b/common/rc > @@ -60,12 +60,15 @@ _round_up_to_page_boundary() > echo $(( (n + page_size - 1) & ~(page_size - 1) )) > } > > +# You can override the $map_len but its optional, by default we use the > +# max allowed size. If you use a length greater than the default you can > +# expect a SIBGUS and test for it. > _mread() > { > local file=$1 > local offset=$2 > local length=$3 > - local map_len=$(_round_up_to_page_boundary $(_get_filesize $file)) > + local map_len=${4:-$(_round_up_to_page_boundary $(_get_filesize $file)) } > > # Some callers expect xfs_io to crash with SIGBUS due to the mread, > # causing the shell to print "Bus error" to stderr. To allow this > diff --git a/tests/generic/749 b/tests/generic/749 > new file mode 100755 > index 000000000000..2dcced4e3c13 > --- /dev/null > +++ b/tests/generic/749 > @@ -0,0 +1,256 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) Luis Chamberlain. All Rights Reserved. > +# > +# FS QA Test 749 > +# > +# As per POSIX NOTES mmap(2) maps multiples of the system page size, but if the > +# data mapped is not multiples of the page size the remaining bytes are zeroed > +# out when mapped and modifications to that region are not written to the file. > +# On Linux when you write data to such partial page after the end of the > +# object, the data stays in the page cache even after the file is closed and > +# unmapped and even though the data is never written to the file itself, > +# subsequent mappings may see the modified content. If you go *beyond* this > +# page, you should get a SIGBUS. This test verifies we zero-fill to page > +# boundary and ensures we get a SIGBUS if we write to data beyond the system > +# page size even if the block size is greater than the system page size. > +. ./common/preamble > +. ./common/rc > +_begin_fstest auto quick prealloc > + > +# Import common functions. > +. ./common/filter > + > +# real QA test starts here > +_supported_fs generic > +_require_scratch_nocheck > +_require_test > +_require_xfs_io_command "truncate" > +_require_xfs_io_command "falloc" > + > +# _fixed_by_git_commit kernel <pending-upstream> \ > +# "filemap: cap PTE range to be created to allowed zero fill in folio_map_range()" > + > +filter_xfs_io_data_unique() > +{ > + _filter_xfs_io_offset | sed -e 's| |\n|g' | grep -E -v "\.|XX|\*" | \ > + sort -u | tr -d '\n' > +} > + > + > +setup_zeroed_file() > +{ > + local file_len=$1 > + local sparse=$2 > + > + if $sparse; then > + $XFS_IO_PROG -f -c "truncate $file_len" $test_file > + else > + $XFS_IO_PROG -f -c "falloc 0 $file_len" $test_file > + fi > +} > + > +mwrite() > +{ > + local file=$1 > + local offset=$2 > + local length=$3 > + local map_len=${4:-$(_round_up_to_page_boundary $(_get_filesize $file)) } > + > + # Some callers expect xfs_io to crash with SIGBUS due to the mread, > + # causing the shell to print "Bus error" to stderr. To allow this > + # message to be redirected, execute xfs_io in a new shell instance. > + # However, for this to work reliably, we also need to prevent the new > + # shell instance from optimizing out the fork and directly exec'ing > + # xfs_io. The easiest way to do that is to append 'true' to the > + # commands, so that xfs_io is no longer the last command the shell sees. > + bash -c "trap '' SIGBUS; ulimit -c 0; \ > + $XFS_IO_PROG $file \ > + -c 'mmap -w 0 $map_len' \ > + -c 'mwrite $offset $length'; \ > + true" > +} > + > +do_mmap_tests() > +{ > + local block_size=$1 > + local file_len=$2 > + local offset=$3 > + local len=$4 > + local use_sparse_file=${5:-false} > + local new_filelen=0 > + local map_len=0 > + local csum=0 > + local fs_block_size=$(_get_file_block_size $SCRATCH_MNT) > + local failed=0 > + > + echo -en "\n\n==> Testing blocksize $block_size " >> $seqres.full > + echo -en "file_len: $file_len offset: $offset " >> $seqres.full > + echo -e "len: $len sparse: $use_sparse_file" >> $seqres.full > + > + if ((fs_block_size != block_size)); then > + _fail "Block size created ($block_size) doesn't match _get_file_block_size on mount ($fs_block_size)" > + fi > + > + rm -f $SCRATCH_MNT/file > + > + # This let's us also test against sparse files > + setup_zeroed_file $file_len $use_sparse_file > + > + # This will overwrite the old data, the file size is the > + # delta between offset and len now. > + $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 512 $offset $len" \ > + $test_file >> $seqres.full > + > + sync > + new_filelen=$(_get_filesize $test_file) > + map_len=$(_round_up_to_page_boundary $new_filelen) > + csum_orig="$(_md5_checksum $test_file)" > + > + # A couple of mmap() tests: > + # > + # We are allowed to mmap() up to the boundary of the page size of a > + # data object, but there a few rules to follow we must check for: > + # > + # a) zero-fill test for the data: POSIX says we should zero fill any > + # partial page after the end of the object. Verify zero-fill. > + # b) do not write this bogus data to disk: on Linux, if we write data > + # to a partially filled page, it will stay in the page cache even > + # after the file is closed and unmapped even if it never reaches the > + # file. As per mmap(2) subsequent mappings *may* see the modified > + # content. This means that it also can get other data and we have > + # no rules about what this data should be. Since the data read after > + # the actual object data can vary this test just verifies that the > + # filesize does not change. > + if [[ $map_len -gt $new_filelen ]]; then > + zero_filled_data_len=$((map_len - new_filelen)) > + _scratch_cycle_mount > + expected_zero_data="00" > + zero_filled_data=$($XFS_IO_PROG -r $test_file \ > + -c "mmap -r 0 $map_len" \ > + -c "mread -v $new_filelen $zero_filled_data_len" \ > + -c "munmap" | \ > + filter_xfs_io_data_unique) > + if [[ "$zero_filled_data" != "$expected_zero_data" ]]; then > + let failed=$failed+1 > + echo "Expected data: $expected_zero_data" > + echo " Actual data: $zero_filled_data" > + echo "Zero-fill expectations with mmap() not respected" > + fi > + > + _scratch_cycle_mount > + $XFS_IO_PROG $test_file \ > + -c "mmap -w 0 $map_len" \ > + -c "mwrite $new_filelen $zero_filled_data_len" \ > + -c "munmap" > + sync > + csum_post="$(_md5_checksum $test_file)" > + if [[ "$csum_orig" != "$csum_post" ]]; then > + let failed=$failed+1 > + echo "Expected csum: $csum_orig" > + echo " Actual csum: $csum_post" > + echo "mmap() write up to page boundary should not change actual file contents" > + fi > + > + local filelen_test=$(_get_filesize $test_file) > + if [[ "$filelen_test" != "$new_filelen" ]]; then > + let failed=$failed+1 > + echo "Expected file length: $new_filelen" > + echo " Actual file length: $filelen_test" > + echo "mmap() write up to page boundary should not change actual file size" > + fi > + fi > + > + # Now lets ensure we get SIGBUS when we go beyond the page boundary > + _scratch_cycle_mount > + new_filelen=$(_get_filesize $test_file) > + map_len=$(_round_up_to_page_boundary $new_filelen) > + csum_orig="$(_md5_checksum $test_file)" > + _mread $test_file 0 $map_len >> $seqres.full 2>$tmp.err > + if grep -q 'Bus error' $tmp.err; then > + failed=1 > + cat $tmp.err > + echo "Not expecting SIGBUS when reading up to page boundary" > + fi > + > + # This should just work > + _mread $test_file 0 $map_len >> $seqres.full 2>$tmp.err > + if [[ $? -ne 0 ]]; then > + let failed=$failed+1 > + echo "mmap() read up to page boundary should work" > + fi > + > + # This should just work > + mwrite $map_len 0 $map_len >> $seqres.full 2>$tmp.err > + if [[ $? -ne 0 ]]; then > + let failed=$failed+1 > + echo "mmap() write up to page boundary should work" > + fi > + > + # If we mmap() on the boundary but try to read beyond it just > + # fails, we don't get a SIGBUS > + $XFS_IO_PROG -r $test_file \ > + -c "mmap -r 0 $map_len" \ > + -c "mread 0 $((map_len + 10))" >> $seqres.full 2>$tmp.err > + local mread_err=$? > + if [[ $mread_err -eq 0 ]]; then > + let failed=$failed+1 > + echo "mmap() to page boundary works as expected but reading beyond should fail: $mread_err" > + fi > + > + $XFS_IO_PROG -w $test_file \ > + -c "mmap -w 0 $map_len" \ > + -c "mwrite 0 $((map_len + 10))" >> $seqres.full 2>$tmp.err > + local mwrite_err=$? > + if [[ $mwrite_err -eq 0 ]]; then > + let failed=$failed+1 > + echo "mmap() to page boundary works as expected but writing beyond should fail: $mwrite_err" > + fi > + > + # Now let's go beyond the allowed mmap() page boundary > + _mread $test_file 0 $((map_len + 10)) $((map_len + 10)) >> $seqres.full 2>$tmp.err > + if ! grep -q 'Bus error' $tmp.err; then > + let failed=$failed+1 > + echo "Expected SIGBUS when mmap() reading beyond page boundary" > + fi > + > + mwrite $test_file 0 $((map_len + 10)) $((map_len + 10)) >> $seqres.full 2>$tmp.err > + if ! grep -q 'Bus error' $tmp.err; then > + let failed=$failed+1 > + echo "Expected SIGBUS when mmap() writing beyond page boundary" > + fi > + > + local filelen_test=$(_get_filesize $test_file) > + if [[ "$filelen_test" != "$new_filelen" ]]; then > + let failed=$failed+1 > + echo "Expected file length: $new_filelen" > + echo " Actual file length: $filelen_test" > + echo "reading or writing beyond file size up to mmap() page boundary should not change file size" > + fi > + > + if [[ $failed -eq 1 ]]; then > + _fail "Test had $failed failures..." > + fi > +} > + > +test_block_size() > +{ > + local block_size=$1 > + > + do_mmap_tests $block_size 512 3 5 > + do_mmap_tests $block_size 11k 0 $((4096 * 3 + 3)) > + do_mmap_tests $block_size 16k 0 $((16384+3)) > + do_mmap_tests $block_size 16k $((16384-10)) $((16384+20)) > + do_mmap_tests $block_size 64k 0 $((65536+3)) > + do_mmap_tests $block_size 4k 4090 30 true > +} > + > +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > +_scratch_mount > +test_file=$SCRATCH_MNT/file > +block_size=$(_get_file_block_size "$SCRATCH_MNT") > +test_block_size $block_size > + > +echo "Silence is golden" > +status=0 > +exit > diff --git a/tests/generic/749.out b/tests/generic/749.out > new file mode 100644 > index 000000000000..24658deddb99 > --- /dev/null > +++ b/tests/generic/749.out > @@ -0,0 +1,2 @@ > +QA output created by 749 > +Silence is golden > -- > 2.43.0 > >
diff --git a/common/rc b/common/rc index fa7942809d6c..e812a2f7cc67 100644 --- a/common/rc +++ b/common/rc @@ -60,12 +60,15 @@ _round_up_to_page_boundary() echo $(( (n + page_size - 1) & ~(page_size - 1) )) } +# You can override the $map_len but its optional, by default we use the +# max allowed size. If you use a length greater than the default you can +# expect a SIBGUS and test for it. _mread() { local file=$1 local offset=$2 local length=$3 - local map_len=$(_round_up_to_page_boundary $(_get_filesize $file)) + local map_len=${4:-$(_round_up_to_page_boundary $(_get_filesize $file)) } # Some callers expect xfs_io to crash with SIGBUS due to the mread, # causing the shell to print "Bus error" to stderr. To allow this diff --git a/tests/generic/749 b/tests/generic/749 new file mode 100755 index 000000000000..2dcced4e3c13 --- /dev/null +++ b/tests/generic/749 @@ -0,0 +1,256 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) Luis Chamberlain. All Rights Reserved. +# +# FS QA Test 749 +# +# As per POSIX NOTES mmap(2) maps multiples of the system page size, but if the +# data mapped is not multiples of the page size the remaining bytes are zeroed +# out when mapped and modifications to that region are not written to the file. +# On Linux when you write data to such partial page after the end of the +# object, the data stays in the page cache even after the file is closed and +# unmapped and even though the data is never written to the file itself, +# subsequent mappings may see the modified content. If you go *beyond* this +# page, you should get a SIGBUS. This test verifies we zero-fill to page +# boundary and ensures we get a SIGBUS if we write to data beyond the system +# page size even if the block size is greater than the system page size. +. ./common/preamble +. ./common/rc +_begin_fstest auto quick prealloc + +# Import common functions. +. ./common/filter + +# real QA test starts here +_supported_fs generic +_require_scratch_nocheck +_require_test +_require_xfs_io_command "truncate" +_require_xfs_io_command "falloc" + +# _fixed_by_git_commit kernel <pending-upstream> \ +# "filemap: cap PTE range to be created to allowed zero fill in folio_map_range()" + +filter_xfs_io_data_unique() +{ + _filter_xfs_io_offset | sed -e 's| |\n|g' | grep -E -v "\.|XX|\*" | \ + sort -u | tr -d '\n' +} + + +setup_zeroed_file() +{ + local file_len=$1 + local sparse=$2 + + if $sparse; then + $XFS_IO_PROG -f -c "truncate $file_len" $test_file + else + $XFS_IO_PROG -f -c "falloc 0 $file_len" $test_file + fi +} + +mwrite() +{ + local file=$1 + local offset=$2 + local length=$3 + local map_len=${4:-$(_round_up_to_page_boundary $(_get_filesize $file)) } + + # Some callers expect xfs_io to crash with SIGBUS due to the mread, + # causing the shell to print "Bus error" to stderr. To allow this + # message to be redirected, execute xfs_io in a new shell instance. + # However, for this to work reliably, we also need to prevent the new + # shell instance from optimizing out the fork and directly exec'ing + # xfs_io. The easiest way to do that is to append 'true' to the + # commands, so that xfs_io is no longer the last command the shell sees. + bash -c "trap '' SIGBUS; ulimit -c 0; \ + $XFS_IO_PROG $file \ + -c 'mmap -w 0 $map_len' \ + -c 'mwrite $offset $length'; \ + true" +} + +do_mmap_tests() +{ + local block_size=$1 + local file_len=$2 + local offset=$3 + local len=$4 + local use_sparse_file=${5:-false} + local new_filelen=0 + local map_len=0 + local csum=0 + local fs_block_size=$(_get_file_block_size $SCRATCH_MNT) + local failed=0 + + echo -en "\n\n==> Testing blocksize $block_size " >> $seqres.full + echo -en "file_len: $file_len offset: $offset " >> $seqres.full + echo -e "len: $len sparse: $use_sparse_file" >> $seqres.full + + if ((fs_block_size != block_size)); then + _fail "Block size created ($block_size) doesn't match _get_file_block_size on mount ($fs_block_size)" + fi + + rm -f $SCRATCH_MNT/file + + # This let's us also test against sparse files + setup_zeroed_file $file_len $use_sparse_file + + # This will overwrite the old data, the file size is the + # delta between offset and len now. + $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 512 $offset $len" \ + $test_file >> $seqres.full + + sync + new_filelen=$(_get_filesize $test_file) + map_len=$(_round_up_to_page_boundary $new_filelen) + csum_orig="$(_md5_checksum $test_file)" + + # A couple of mmap() tests: + # + # We are allowed to mmap() up to the boundary of the page size of a + # data object, but there a few rules to follow we must check for: + # + # a) zero-fill test for the data: POSIX says we should zero fill any + # partial page after the end of the object. Verify zero-fill. + # b) do not write this bogus data to disk: on Linux, if we write data + # to a partially filled page, it will stay in the page cache even + # after the file is closed and unmapped even if it never reaches the + # file. As per mmap(2) subsequent mappings *may* see the modified + # content. This means that it also can get other data and we have + # no rules about what this data should be. Since the data read after + # the actual object data can vary this test just verifies that the + # filesize does not change. + if [[ $map_len -gt $new_filelen ]]; then + zero_filled_data_len=$((map_len - new_filelen)) + _scratch_cycle_mount + expected_zero_data="00" + zero_filled_data=$($XFS_IO_PROG -r $test_file \ + -c "mmap -r 0 $map_len" \ + -c "mread -v $new_filelen $zero_filled_data_len" \ + -c "munmap" | \ + filter_xfs_io_data_unique) + if [[ "$zero_filled_data" != "$expected_zero_data" ]]; then + let failed=$failed+1 + echo "Expected data: $expected_zero_data" + echo " Actual data: $zero_filled_data" + echo "Zero-fill expectations with mmap() not respected" + fi + + _scratch_cycle_mount + $XFS_IO_PROG $test_file \ + -c "mmap -w 0 $map_len" \ + -c "mwrite $new_filelen $zero_filled_data_len" \ + -c "munmap" + sync + csum_post="$(_md5_checksum $test_file)" + if [[ "$csum_orig" != "$csum_post" ]]; then + let failed=$failed+1 + echo "Expected csum: $csum_orig" + echo " Actual csum: $csum_post" + echo "mmap() write up to page boundary should not change actual file contents" + fi + + local filelen_test=$(_get_filesize $test_file) + if [[ "$filelen_test" != "$new_filelen" ]]; then + let failed=$failed+1 + echo "Expected file length: $new_filelen" + echo " Actual file length: $filelen_test" + echo "mmap() write up to page boundary should not change actual file size" + fi + fi + + # Now lets ensure we get SIGBUS when we go beyond the page boundary + _scratch_cycle_mount + new_filelen=$(_get_filesize $test_file) + map_len=$(_round_up_to_page_boundary $new_filelen) + csum_orig="$(_md5_checksum $test_file)" + _mread $test_file 0 $map_len >> $seqres.full 2>$tmp.err + if grep -q 'Bus error' $tmp.err; then + failed=1 + cat $tmp.err + echo "Not expecting SIGBUS when reading up to page boundary" + fi + + # This should just work + _mread $test_file 0 $map_len >> $seqres.full 2>$tmp.err + if [[ $? -ne 0 ]]; then + let failed=$failed+1 + echo "mmap() read up to page boundary should work" + fi + + # This should just work + mwrite $map_len 0 $map_len >> $seqres.full 2>$tmp.err + if [[ $? -ne 0 ]]; then + let failed=$failed+1 + echo "mmap() write up to page boundary should work" + fi + + # If we mmap() on the boundary but try to read beyond it just + # fails, we don't get a SIGBUS + $XFS_IO_PROG -r $test_file \ + -c "mmap -r 0 $map_len" \ + -c "mread 0 $((map_len + 10))" >> $seqres.full 2>$tmp.err + local mread_err=$? + if [[ $mread_err -eq 0 ]]; then + let failed=$failed+1 + echo "mmap() to page boundary works as expected but reading beyond should fail: $mread_err" + fi + + $XFS_IO_PROG -w $test_file \ + -c "mmap -w 0 $map_len" \ + -c "mwrite 0 $((map_len + 10))" >> $seqres.full 2>$tmp.err + local mwrite_err=$? + if [[ $mwrite_err -eq 0 ]]; then + let failed=$failed+1 + echo "mmap() to page boundary works as expected but writing beyond should fail: $mwrite_err" + fi + + # Now let's go beyond the allowed mmap() page boundary + _mread $test_file 0 $((map_len + 10)) $((map_len + 10)) >> $seqres.full 2>$tmp.err + if ! grep -q 'Bus error' $tmp.err; then + let failed=$failed+1 + echo "Expected SIGBUS when mmap() reading beyond page boundary" + fi + + mwrite $test_file 0 $((map_len + 10)) $((map_len + 10)) >> $seqres.full 2>$tmp.err + if ! grep -q 'Bus error' $tmp.err; then + let failed=$failed+1 + echo "Expected SIGBUS when mmap() writing beyond page boundary" + fi + + local filelen_test=$(_get_filesize $test_file) + if [[ "$filelen_test" != "$new_filelen" ]]; then + let failed=$failed+1 + echo "Expected file length: $new_filelen" + echo " Actual file length: $filelen_test" + echo "reading or writing beyond file size up to mmap() page boundary should not change file size" + fi + + if [[ $failed -eq 1 ]]; then + _fail "Test had $failed failures..." + fi +} + +test_block_size() +{ + local block_size=$1 + + do_mmap_tests $block_size 512 3 5 + do_mmap_tests $block_size 11k 0 $((4096 * 3 + 3)) + do_mmap_tests $block_size 16k 0 $((16384+3)) + do_mmap_tests $block_size 16k $((16384-10)) $((16384+20)) + do_mmap_tests $block_size 64k 0 $((65536+3)) + do_mmap_tests $block_size 4k 4090 30 true +} + +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" +_scratch_mount +test_file=$SCRATCH_MNT/file +block_size=$(_get_file_block_size "$SCRATCH_MNT") +test_block_size $block_size + +echo "Silence is golden" +status=0 +exit diff --git a/tests/generic/749.out b/tests/generic/749.out new file mode 100644 index 000000000000..24658deddb99 --- /dev/null +++ b/tests/generic/749.out @@ -0,0 +1,2 @@ +QA output created by 749 +Silence is golden