Message ID | 20250310115621.3441518-4-chao@kernel.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [v2,1/4] common/config: remove redundant export variables | expand |
On Mon, Mar 10, 2025 at 07:56:21PM +0800, Chao Yu wrote: > This is a regression test to check whether fsck can handle corrupted > nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, > and expects fsck.f2fs can detect such corruption and do the repair. > > Cc: Jaegeuk Kim <jaegeuk@kernel.org> > Signed-off-by: Chao Yu <chao@kernel.org> > --- > v2: > - make _scratch_mkfs() to format f2fs image forcely > - adjust _check_scratch_fs() to allow specified parameter of f2fs > - add _fixed_by_git_commit > - add _require_command inject.f2fs > - simply return value handling > common/rc | 9 ++- > tests/f2fs/009 | 133 +++++++++++++++++++++++++++++++++++++++++++++ > tests/f2fs/009.out | 2 + > 3 files changed, 143 insertions(+), 1 deletion(-) > create mode 100755 tests/f2fs/009 > create mode 100644 tests/f2fs/009.out > > diff --git a/common/rc b/common/rc > index bf24da4e..e156f3af 100644 > --- a/common/rc > +++ b/common/rc > @@ -993,7 +993,7 @@ _scratch_mkfs() > mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \"" > ;; > f2fs) > - mkfs_cmd="$MKFS_F2FS_PROG" > + mkfs_cmd="$MKFS_F2FS_PROG -f" > mkfs_filter="cat" > ;; > ocfs2) > @@ -3682,6 +3682,13 @@ _check_scratch_fs() > ubifs) > # there is no fsck program for ubifs yet > ;; > + f2fs) > + if [ "$FSCK_OPTIONS" == "--dry-run" ]; then > + fsck -t $FSTYP $device -- $FSCK_OPTIONS >> $seqres.full 2>&1 > + else > + _check_generic_filesystem $device > + fi If the "--dry-run" of fsck.f2fs is similar with "-n -y" of fsck.ext4. Then you might need to change the fsck_opts() function in common/config. _fsck_opts() { case $FSTYP in ext2|ext3|ext4) export FSCK_OPTIONS="-nf" ;; reiser*) export FSCK_OPTIONS="--yes" ;; f2fs) export FSCK_OPTIONS="" ;; ... } The default FSCK_OPTIONS for f2fs should be "--dry-run". f2fs) export FSCK_OPTIONS="--dry-run" Then ... [snip] > + $F2FS_INJECT_PROG --node --mb i_links --nid $ino --val $nlink $SCRATCH_DEV \ > + >> $seqres.full || _fail "fail to inject" > + > + export FSCK_OPTIONS="--dry-run" ... then you can save this export FSCK_OPTIONS="--dry-run". I've explained more in your v1 patch review, refer to: https://lore.kernel.org/fstests/20250310194818.wki325qreuta26nc@dell-per750-06-vm-08.rhts.eng.pek2.redhat.com/T/#u Thanks, Zorro > + _check_scratch_fs >>$seqres.full 2>&1 && _fail "can't find corruption" > + _repair_scratch_fs >> $seqres.full > + _check_scratch_fs > + > + _scratch_mount > + _scratch_unmount > +done > + > +echo "Silence is golden" > + > +status=0 > +exit > diff --git a/tests/f2fs/009.out b/tests/f2fs/009.out > new file mode 100644 > index 00000000..7e977155 > --- /dev/null > +++ b/tests/f2fs/009.out > @@ -0,0 +1,2 @@ > +QA output created by 009 > +Silence is golden > -- > 2.48.1 >
On Mon, Mar 10, 2025 at 07:56:21PM +0800, Chao Yu wrote: > This is a regression test to check whether fsck can handle corrupted > nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, > and expects fsck.f2fs can detect such corruption and do the repair. > > Cc: Jaegeuk Kim <jaegeuk@kernel.org> > Signed-off-by: Chao Yu <chao@kernel.org> > --- > v2: > - make _scratch_mkfs() to format f2fs image forcely > - adjust _check_scratch_fs() to allow specified parameter of f2fs > - add _fixed_by_git_commit > - add _require_command inject.f2fs > - simply return value handling > common/rc | 9 ++- > tests/f2fs/009 | 133 +++++++++++++++++++++++++++++++++++++++++++++ > tests/f2fs/009.out | 2 + > 3 files changed, 143 insertions(+), 1 deletion(-) > create mode 100755 tests/f2fs/009 > create mode 100644 tests/f2fs/009.out > > diff --git a/common/rc b/common/rc > index bf24da4e..e156f3af 100644 > --- a/common/rc > +++ b/common/rc > @@ -993,7 +993,7 @@ _scratch_mkfs() > mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \"" > ;; > f2fs) > - mkfs_cmd="$MKFS_F2FS_PROG" > + mkfs_cmd="$MKFS_F2FS_PROG -f" > mkfs_filter="cat" > ;; > ocfs2) > @@ -3682,6 +3682,13 @@ _check_scratch_fs() > ubifs) > # there is no fsck program for ubifs yet > ;; > + f2fs) > + if [ "$FSCK_OPTIONS" == "--dry-run" ]; then > + fsck -t $FSTYP $device -- $FSCK_OPTIONS >> $seqres.full 2>&1 > + else > + _check_generic_filesystem $device > + fi > + ;; > *) > _check_generic_filesystem $device > ;; > diff --git a/tests/f2fs/009 b/tests/f2fs/009 > new file mode 100755 > index 00000000..d14df968 > --- /dev/null > +++ b/tests/f2fs/009 > @@ -0,0 +1,133 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2025 Chao Yu. All Rights Reserved. > +# > +# FS QA Test No. f2fs/009 > +# > +# This is a regression test to check whether fsck can handle corrupted > +# nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, > +# and expects fsck.f2fs can detect such corruption and do the repair. > +# > +. ./common/preamble > +_begin_fstest auto quick > + > +_require_scratch > +_require_command "$F2FS_INJECT_PROG" inject.f2fs > + > +_fixed_by_git_commit f2fs-tools 958cd6e ^^^^^^^^ commit subject? > + > +filename=$SCRATCH_MNT/foo > +hardlink=$SCRATCH_MNT/bar > + > +for ((i=0;i<14;i++)) do > + echo "round: " $i >> $seqres.full > + > + _scratch_mkfs "-f" >> $seqres.full As you've add "-f" in _scratch_mkfs, so this "-f" can be removed. > + _scratch_mount >> $seqres.full ^^^^^^ I think it's useless > + > + if [ $i == 0 ]; then > + touch $filename > + ino=`stat -c '%i' $filename` > + nlink=0 > + elif [ $i == 1 ]; then > + mkdir $filename > + ino=`stat -c '%i' $filename` > + nlink=1 > + elif [ $i == 2 ]; then > + mknod $filename c 9 0 > + ino=`stat -c '%i' $filename` > + nlink=0 > + elif [ $i == 3 ]; then > + mknod $filename b 8 0 > + ino=`stat -c '%i' $filename` > + nlink=0 > + elif [ $i == 4 ]; then > + mkfifo $filename > + ino=`stat -c '%i' $filename` > + nlink=0 > + elif [ $i == 5 ]; then > + socket -s $filename >> $seqres.full 2>&1 & ^^^^^^ Where's the "socket" command from? I think it's not always installed on any Linux system. fstests never use this command in any test case. If you need this command, you might need to check that, and _notrun if it's not installed. > + pid=$! As you have background processes in this test case, you need to make sure these processes are killed properly in _cleanup, especially if the test is killed suddently, refer to generic/019. Thanks, Zorro > + sleep 2 > + ino=`stat -c '%i' $filename` > + kill $pid >> $seqres.full 2>&1 > + nlink=0 > + elif [ $i == 6 ]; then > + ln -s $SCRATCH_MNT/empty $filename > + ino=`stat -c '%i' $filename` > + nlink=0 > + elif [ $i == 7 ]; then > + # orphan inode > + touch $filename > + ino=`stat -c '%i' $filename` > + $F2FS_IO_PROG write 1 0 1 zero atomic_commit $filename 5000 >> $seqres.full 2>&1 & > + stat $filename >> $seqres.full > + rm $filename > + $F2FS_IO_PROG shutdown 1 $SCRATCH_MNT/ >> $seqres.full > + sleep 6 > + nlink=1 > + elif [ $i == 8 ]; then > + # hardlink on file > + touch $filename > + ino=`stat -c '%i' $filename` > + ln $filename $hardlink > + nlink=0 > + elif [ $i == 9 ]; then > + # hardlink on charactor > + mknod $filename c 9 0 > + ino=`stat -c '%i' $filename` > + ln $filename $hardlink > + nlink=0 > + elif [ $i == 10 ]; then > + # hardlink on blockdev > + mknod $filename b 8 0 > + ino=`stat -c '%i' $filename` > + ln $filename $hardlink > + nlink=0 > + elif [ $i == 11 ]; then > + # hardlink on pipe > + mkfifo $filename > + ino=`stat -c '%i' $filename` > + ln $filename $hardlink > + nlink=0 > + elif [ $i == 12 ]; then > + # hardlink on socket > + socket -s $filename >> $seqres.full 2>&1 & > + pid=$! > + sleep 2 > + ino=`stat -c '%i' $filename` > + kill $pid >> $seqres.full 2>&1 > + ln $filename $hardlink > + nlink=0 > + elif [ $i == 13 ]; then > + # hardlink on symlink > + ln -s $SCRATCH_MNT/empty $filename > + ino=`stat -c '%i' $filename` > + ln $filename $hardlink > + nlink=0 > + fi > + > + if [ $i != 7 ]; then > + stat $SCRATCH_MNT/* >> $seqres.full > + fi > + echo "ino:"$ino >> $seqres.full > + echo "nlink:"$nlink >> $seqres.full > + > + _scratch_unmount > + > + $F2FS_INJECT_PROG --node --mb i_links --nid $ino --val $nlink $SCRATCH_DEV \ > + >> $seqres.full || _fail "fail to inject" > + > + export FSCK_OPTIONS="--dry-run" > + _check_scratch_fs >>$seqres.full 2>&1 && _fail "can't find corruption" > + _repair_scratch_fs >> $seqres.full > + _check_scratch_fs > + > + _scratch_mount > + _scratch_unmount > +done > + > +echo "Silence is golden" > + > +status=0 > +exit > diff --git a/tests/f2fs/009.out b/tests/f2fs/009.out > new file mode 100644 > index 00000000..7e977155 > --- /dev/null > +++ b/tests/f2fs/009.out > @@ -0,0 +1,2 @@ > +QA output created by 009 > +Silence is golden > -- > 2.48.1 >
On 3/11/25 04:25, Zorro Lang wrote: > On Mon, Mar 10, 2025 at 07:56:21PM +0800, Chao Yu wrote: >> This is a regression test to check whether fsck can handle corrupted >> nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, >> and expects fsck.f2fs can detect such corruption and do the repair. >> >> Cc: Jaegeuk Kim <jaegeuk@kernel.org> >> Signed-off-by: Chao Yu <chao@kernel.org> >> --- >> v2: >> - make _scratch_mkfs() to format f2fs image forcely >> - adjust _check_scratch_fs() to allow specified parameter of f2fs >> - add _fixed_by_git_commit >> - add _require_command inject.f2fs >> - simply return value handling >> common/rc | 9 ++- >> tests/f2fs/009 | 133 +++++++++++++++++++++++++++++++++++++++++++++ >> tests/f2fs/009.out | 2 + >> 3 files changed, 143 insertions(+), 1 deletion(-) >> create mode 100755 tests/f2fs/009 >> create mode 100644 tests/f2fs/009.out >> >> diff --git a/common/rc b/common/rc >> index bf24da4e..e156f3af 100644 >> --- a/common/rc >> +++ b/common/rc >> @@ -993,7 +993,7 @@ _scratch_mkfs() >> mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \"" >> ;; >> f2fs) >> - mkfs_cmd="$MKFS_F2FS_PROG" >> + mkfs_cmd="$MKFS_F2FS_PROG -f" >> mkfs_filter="cat" >> ;; >> ocfs2) >> @@ -3682,6 +3682,13 @@ _check_scratch_fs() >> ubifs) >> # there is no fsck program for ubifs yet >> ;; >> + f2fs) >> + if [ "$FSCK_OPTIONS" == "--dry-run" ]; then >> + fsck -t $FSTYP $device -- $FSCK_OPTIONS >> $seqres.full 2>&1 >> + else >> + _check_generic_filesystem $device >> + fi >> + ;; >> *) >> _check_generic_filesystem $device >> ;; >> diff --git a/tests/f2fs/009 b/tests/f2fs/009 >> new file mode 100755 >> index 00000000..d14df968 >> --- /dev/null >> +++ b/tests/f2fs/009 >> @@ -0,0 +1,133 @@ >> +#! /bin/bash >> +# SPDX-License-Identifier: GPL-2.0 >> +# Copyright (c) 2025 Chao Yu. All Rights Reserved. >> +# >> +# FS QA Test No. f2fs/009 >> +# >> +# This is a regression test to check whether fsck can handle corrupted >> +# nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, >> +# and expects fsck.f2fs can detect such corruption and do the repair. >> +# >> +. ./common/preamble >> +_begin_fstest auto quick >> + >> +_require_scratch >> +_require_command "$F2FS_INJECT_PROG" inject.f2fs >> + >> +_fixed_by_git_commit f2fs-tools 958cd6e > ^^^^^^^^ > commit subject? > >> + >> +filename=$SCRATCH_MNT/foo >> +hardlink=$SCRATCH_MNT/bar >> + >> +for ((i=0;i<14;i++)) do >> + echo "round: " $i >> $seqres.full >> + >> + _scratch_mkfs "-f" >> $seqres.full > > As you've add "-f" in _scratch_mkfs, so this "-f" can be removed. > >> + _scratch_mount >> $seqres.full > ^^^^^^ > I think it's useless > >> + >> + if [ $i == 0 ]; then >> + touch $filename >> + ino=`stat -c '%i' $filename` >> + nlink=0 >> + elif [ $i == 1 ]; then >> + mkdir $filename >> + ino=`stat -c '%i' $filename` >> + nlink=1 >> + elif [ $i == 2 ]; then >> + mknod $filename c 9 0 >> + ino=`stat -c '%i' $filename` >> + nlink=0 >> + elif [ $i == 3 ]; then >> + mknod $filename b 8 0 >> + ino=`stat -c '%i' $filename` >> + nlink=0 >> + elif [ $i == 4 ]; then >> + mkfifo $filename >> + ino=`stat -c '%i' $filename` >> + nlink=0 >> + elif [ $i == 5 ]; then >> + socket -s $filename >> $seqres.full 2>&1 & > ^^^^^^ > > Where's the "socket" command from? I think it's not always installed on any > Linux system. fstests never use this command in any test case. If you > need this command, you might need to check that, and _notrun if it's > not installed. > >> + pid=$! > > As you have background processes in this test case, you need to make sure > these processes are killed properly in _cleanup, especially if the test > is killed suddently, refer to generic/019. Zorro, I've updated the patchset, could you please help to check that? Thanks, > > Thanks, > Zorro > >> + sleep 2 >> + ino=`stat -c '%i' $filename` >> + kill $pid >> $seqres.full 2>&1 >> + nlink=0 >> + elif [ $i == 6 ]; then >> + ln -s $SCRATCH_MNT/empty $filename >> + ino=`stat -c '%i' $filename` >> + nlink=0 >> + elif [ $i == 7 ]; then >> + # orphan inode >> + touch $filename >> + ino=`stat -c '%i' $filename` >> + $F2FS_IO_PROG write 1 0 1 zero atomic_commit $filename 5000 >> $seqres.full 2>&1 & >> + stat $filename >> $seqres.full >> + rm $filename >> + $F2FS_IO_PROG shutdown 1 $SCRATCH_MNT/ >> $seqres.full >> + sleep 6 >> + nlink=1 >> + elif [ $i == 8 ]; then >> + # hardlink on file >> + touch $filename >> + ino=`stat -c '%i' $filename` >> + ln $filename $hardlink >> + nlink=0 >> + elif [ $i == 9 ]; then >> + # hardlink on charactor >> + mknod $filename c 9 0 >> + ino=`stat -c '%i' $filename` >> + ln $filename $hardlink >> + nlink=0 >> + elif [ $i == 10 ]; then >> + # hardlink on blockdev >> + mknod $filename b 8 0 >> + ino=`stat -c '%i' $filename` >> + ln $filename $hardlink >> + nlink=0 >> + elif [ $i == 11 ]; then >> + # hardlink on pipe >> + mkfifo $filename >> + ino=`stat -c '%i' $filename` >> + ln $filename $hardlink >> + nlink=0 >> + elif [ $i == 12 ]; then >> + # hardlink on socket >> + socket -s $filename >> $seqres.full 2>&1 & >> + pid=$! >> + sleep 2 >> + ino=`stat -c '%i' $filename` >> + kill $pid >> $seqres.full 2>&1 >> + ln $filename $hardlink >> + nlink=0 >> + elif [ $i == 13 ]; then >> + # hardlink on symlink >> + ln -s $SCRATCH_MNT/empty $filename >> + ino=`stat -c '%i' $filename` >> + ln $filename $hardlink >> + nlink=0 >> + fi >> + >> + if [ $i != 7 ]; then >> + stat $SCRATCH_MNT/* >> $seqres.full >> + fi >> + echo "ino:"$ino >> $seqres.full >> + echo "nlink:"$nlink >> $seqres.full >> + >> + _scratch_unmount >> + >> + $F2FS_INJECT_PROG --node --mb i_links --nid $ino --val $nlink $SCRATCH_DEV \ >> + >> $seqres.full || _fail "fail to inject" >> + >> + export FSCK_OPTIONS="--dry-run" >> + _check_scratch_fs >>$seqres.full 2>&1 && _fail "can't find corruption" >> + _repair_scratch_fs >> $seqres.full >> + _check_scratch_fs >> + >> + _scratch_mount >> + _scratch_unmount >> +done >> + >> +echo "Silence is golden" >> + >> +status=0 >> +exit >> diff --git a/tests/f2fs/009.out b/tests/f2fs/009.out >> new file mode 100644 >> index 00000000..7e977155 >> --- /dev/null >> +++ b/tests/f2fs/009.out >> @@ -0,0 +1,2 @@ >> +QA output created by 009 >> +Silence is golden >> -- >> 2.48.1 >> >
diff --git a/common/rc b/common/rc index bf24da4e..e156f3af 100644 --- a/common/rc +++ b/common/rc @@ -993,7 +993,7 @@ _scratch_mkfs() mkfs_filter="grep -v -e ^Warning: -e \"^mke2fs \"" ;; f2fs) - mkfs_cmd="$MKFS_F2FS_PROG" + mkfs_cmd="$MKFS_F2FS_PROG -f" mkfs_filter="cat" ;; ocfs2) @@ -3682,6 +3682,13 @@ _check_scratch_fs() ubifs) # there is no fsck program for ubifs yet ;; + f2fs) + if [ "$FSCK_OPTIONS" == "--dry-run" ]; then + fsck -t $FSTYP $device -- $FSCK_OPTIONS >> $seqres.full 2>&1 + else + _check_generic_filesystem $device + fi + ;; *) _check_generic_filesystem $device ;; diff --git a/tests/f2fs/009 b/tests/f2fs/009 new file mode 100755 index 00000000..d14df968 --- /dev/null +++ b/tests/f2fs/009 @@ -0,0 +1,133 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2025 Chao Yu. All Rights Reserved. +# +# FS QA Test No. f2fs/009 +# +# This is a regression test to check whether fsck can handle corrupted +# nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, +# and expects fsck.f2fs can detect such corruption and do the repair. +# +. ./common/preamble +_begin_fstest auto quick + +_require_scratch +_require_command "$F2FS_INJECT_PROG" inject.f2fs + +_fixed_by_git_commit f2fs-tools 958cd6e + +filename=$SCRATCH_MNT/foo +hardlink=$SCRATCH_MNT/bar + +for ((i=0;i<14;i++)) do + echo "round: " $i >> $seqres.full + + _scratch_mkfs "-f" >> $seqres.full + _scratch_mount >> $seqres.full + + if [ $i == 0 ]; then + touch $filename + ino=`stat -c '%i' $filename` + nlink=0 + elif [ $i == 1 ]; then + mkdir $filename + ino=`stat -c '%i' $filename` + nlink=1 + elif [ $i == 2 ]; then + mknod $filename c 9 0 + ino=`stat -c '%i' $filename` + nlink=0 + elif [ $i == 3 ]; then + mknod $filename b 8 0 + ino=`stat -c '%i' $filename` + nlink=0 + elif [ $i == 4 ]; then + mkfifo $filename + ino=`stat -c '%i' $filename` + nlink=0 + elif [ $i == 5 ]; then + socket -s $filename >> $seqres.full 2>&1 & + pid=$! + sleep 2 + ino=`stat -c '%i' $filename` + kill $pid >> $seqres.full 2>&1 + nlink=0 + elif [ $i == 6 ]; then + ln -s $SCRATCH_MNT/empty $filename + ino=`stat -c '%i' $filename` + nlink=0 + elif [ $i == 7 ]; then + # orphan inode + touch $filename + ino=`stat -c '%i' $filename` + $F2FS_IO_PROG write 1 0 1 zero atomic_commit $filename 5000 >> $seqres.full 2>&1 & + stat $filename >> $seqres.full + rm $filename + $F2FS_IO_PROG shutdown 1 $SCRATCH_MNT/ >> $seqres.full + sleep 6 + nlink=1 + elif [ $i == 8 ]; then + # hardlink on file + touch $filename + ino=`stat -c '%i' $filename` + ln $filename $hardlink + nlink=0 + elif [ $i == 9 ]; then + # hardlink on charactor + mknod $filename c 9 0 + ino=`stat -c '%i' $filename` + ln $filename $hardlink + nlink=0 + elif [ $i == 10 ]; then + # hardlink on blockdev + mknod $filename b 8 0 + ino=`stat -c '%i' $filename` + ln $filename $hardlink + nlink=0 + elif [ $i == 11 ]; then + # hardlink on pipe + mkfifo $filename + ino=`stat -c '%i' $filename` + ln $filename $hardlink + nlink=0 + elif [ $i == 12 ]; then + # hardlink on socket + socket -s $filename >> $seqres.full 2>&1 & + pid=$! + sleep 2 + ino=`stat -c '%i' $filename` + kill $pid >> $seqres.full 2>&1 + ln $filename $hardlink + nlink=0 + elif [ $i == 13 ]; then + # hardlink on symlink + ln -s $SCRATCH_MNT/empty $filename + ino=`stat -c '%i' $filename` + ln $filename $hardlink + nlink=0 + fi + + if [ $i != 7 ]; then + stat $SCRATCH_MNT/* >> $seqres.full + fi + echo "ino:"$ino >> $seqres.full + echo "nlink:"$nlink >> $seqres.full + + _scratch_unmount + + $F2FS_INJECT_PROG --node --mb i_links --nid $ino --val $nlink $SCRATCH_DEV \ + >> $seqres.full || _fail "fail to inject" + + export FSCK_OPTIONS="--dry-run" + _check_scratch_fs >>$seqres.full 2>&1 && _fail "can't find corruption" + _repair_scratch_fs >> $seqres.full + _check_scratch_fs + + _scratch_mount + _scratch_unmount +done + +echo "Silence is golden" + +status=0 +exit diff --git a/tests/f2fs/009.out b/tests/f2fs/009.out new file mode 100644 index 00000000..7e977155 --- /dev/null +++ b/tests/f2fs/009.out @@ -0,0 +1,2 @@ +QA output created by 009 +Silence is golden
This is a regression test to check whether fsck can handle corrupted nlinks correctly, it uses inject.f2fs to inject nlinks w/ wrong value, and expects fsck.f2fs can detect such corruption and do the repair. Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Chao Yu <chao@kernel.org> --- v2: - make _scratch_mkfs() to format f2fs image forcely - adjust _check_scratch_fs() to allow specified parameter of f2fs - add _fixed_by_git_commit - add _require_command inject.f2fs - simply return value handling common/rc | 9 ++- tests/f2fs/009 | 133 +++++++++++++++++++++++++++++++++++++++++++++ tests/f2fs/009.out | 2 + 3 files changed, 143 insertions(+), 1 deletion(-) create mode 100755 tests/f2fs/009 create mode 100644 tests/f2fs/009.out