diff mbox series

[8/9] common/attr: Cleanup end of line whitespaces issues

Message ID 9c2d87969d29f34e0939fa3a524886e343fb96bb.1623651783.git.riteshh@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series 64K blocksize related fixes | expand

Commit Message

Ritesh Harjani June 14, 2021, 6:28 a.m. UTC
This patch clears the end of line whitespace issues in this file.
Mostly since many kernel developers also keep this editor config to clear
any end of line whitespaces on file save.

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
---
 common/attr | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Comments

Darrick J. Wong June 30, 2021, 3:50 p.m. UTC | #1
On Mon, Jun 14, 2021 at 11:58:12AM +0530, Ritesh Harjani wrote:
> This patch clears the end of line whitespace issues in this file.
> Mostly since many kernel developers also keep this editor config to clear
> any end of line whitespaces on file save.
> 
> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>

Reviewed-by: Darrick J. Wong <djwong@kernel.org>

--D

> ---
>  common/attr | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/common/attr b/common/attr
> index 42ceab92..d3902346 100644
> --- a/common/attr
> +++ b/common/attr
> @@ -59,10 +59,10 @@ _acl_setup_ids()
>          j=1
>          for(i=1; i<1000000 && j<=3;i++){
>            if (! (i in ids)) {
> -	     printf "acl%d=%d;", j, i;		 
> +	     printf "acl%d=%d;", j, i;
>  	     j++
>            }
> -        }	
> +        }
>        }'`
>  }
>  
> @@ -101,7 +101,7 @@ _getfacl_filter_id()
>  _acl_ls()
>  {
>      _ls_l -n $* | awk '{ print $1, $3, $4, $NF }' | _acl_filter_id
> -} 
> +}
>  
>  # create an ACL with n ACEs in it
>  #
> @@ -128,7 +128,7 @@ _filter_aces()
>  	BEGIN {
>  	    FS=":"
>  	    while ( getline <tmpfile > 0 ) {
> -		idlist[$1] = $3 
> +		idlist[$1] = $3
>  	    }
>  	}
>  	/^user/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
> @@ -180,17 +180,17 @@ _require_attrs()
>  {
>  	local args
>  	local nsp
> -	
> +
>  	if [ $# -eq 0 ]; then
>  		args="user"
>  	else
>  	  	args="$*"
>  	fi
> -	
> +
>  	[ -n "$ATTR_PROG" ] || _notrun "attr command not found"
>  	[ -n "$GETFATTR_PROG" ] || _notrun "getfattr command not found"
>  	[ -n "$SETFATTR_PROG" ] || _notrun "setfattr command not found"
> -	
> +
>  	for nsp in $args; do
>  		#
>  		# Test if chacl is able to write an attribute on the target
> @@ -204,14 +204,14 @@ _require_attrs()
>  		touch $TEST_DIR/syscalltest
>  		$SETFATTR_PROG -n "$nsp.xfstests" -v "attr" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
>  		cat $TEST_DIR/syscalltest.out >> $seqres.full
> -		
> +
>  		if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
>  			_notrun "kernel does not support attrs"
>  		fi
>  		if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
>  			_notrun "attr namespace $nsp not supported by this filesystem type: $FSTYP"
>  		fi
> -		
> +
>  		rm -f $TEST_DIR/syscalltest.out
>  	done
>  }
> -- 
> 2.31.1
>
Theodore Ts'o June 30, 2021, 5:19 p.m. UTC | #2
On Mon, Jun 14, 2021 at 11:58:12AM +0530, Ritesh Harjani wrote:
> This patch clears the end of line whitespace issues in this file.
> Mostly since many kernel developers also keep this editor config to clear
> any end of line whitespaces on file save.
> 
> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
diff mbox series

Patch

diff --git a/common/attr b/common/attr
index 42ceab92..d3902346 100644
--- a/common/attr
+++ b/common/attr
@@ -59,10 +59,10 @@  _acl_setup_ids()
         j=1
         for(i=1; i<1000000 && j<=3;i++){
           if (! (i in ids)) {
-	     printf "acl%d=%d;", j, i;		 
+	     printf "acl%d=%d;", j, i;
 	     j++
           }
-        }	
+        }
       }'`
 }
 
@@ -101,7 +101,7 @@  _getfacl_filter_id()
 _acl_ls()
 {
     _ls_l -n $* | awk '{ print $1, $3, $4, $NF }' | _acl_filter_id
-} 
+}
 
 # create an ACL with n ACEs in it
 #
@@ -128,7 +128,7 @@  _filter_aces()
 	BEGIN {
 	    FS=":"
 	    while ( getline <tmpfile > 0 ) {
-		idlist[$1] = $3 
+		idlist[$1] = $3
 	    }
 	}
 	/^user/ { if ($2 in idlist) sub($2, idlist[$2]); print; next}
@@ -180,17 +180,17 @@  _require_attrs()
 {
 	local args
 	local nsp
-	
+
 	if [ $# -eq 0 ]; then
 		args="user"
 	else
 	  	args="$*"
 	fi
-	
+
 	[ -n "$ATTR_PROG" ] || _notrun "attr command not found"
 	[ -n "$GETFATTR_PROG" ] || _notrun "getfattr command not found"
 	[ -n "$SETFATTR_PROG" ] || _notrun "setfattr command not found"
-	
+
 	for nsp in $args; do
 		#
 		# Test if chacl is able to write an attribute on the target
@@ -204,14 +204,14 @@  _require_attrs()
 		touch $TEST_DIR/syscalltest
 		$SETFATTR_PROG -n "$nsp.xfstests" -v "attr" $TEST_DIR/syscalltest > $TEST_DIR/syscalltest.out 2>&1
 		cat $TEST_DIR/syscalltest.out >> $seqres.full
-		
+
 		if grep -q 'Function not implemented' $TEST_DIR/syscalltest.out; then
 			_notrun "kernel does not support attrs"
 		fi
 		if grep -q 'Operation not supported' $TEST_DIR/syscalltest.out; then
 			_notrun "attr namespace $nsp not supported by this filesystem type: $FSTYP"
 		fi
-		
+
 		rm -f $TEST_DIR/syscalltest.out
 	done
 }