diff mbox series

[v6,3/4] btrfs: test verity orphans with dmlogwrites

Message ID a5fe79e4a49b90b59b0901d7dffd154d65358677.1644883592.git.boris@bur.io (mailing list archive)
State New, archived
Headers show
Series tests for btrfs fsverity | expand

Commit Message

Boris Burkov Feb. 15, 2022, 12:09 a.m. UTC
The behavior of orphans is most interesting across mounts, interrupted
at arbitrary points during fsverity enable. To cover as many such cases
as possible, use dmlogwrites and dmsnapshot as in
log-writes/replay-individual.sh. At each log entry, we want to assert a
somewhat complicated invariant:

If verity has not yet started: an orphan indicates that verity has
started.
If verity has started: mount should handle the orphan and blow away
verity data: expect 0 merkle items after mounting the snapshot dev. If
we can measure the file, verity has finished.
If verity has finished: the orphan should be gone, so mount should not
blow away merkle items. Expect the same number of merkle items before
and after mounting the snapshot dev.

Note that this relies on grepping btrfs inspect-internal dump-tree.
Until btrfs-progs has the ability to print the new Merkle items, they
will show up as UNKNOWN.36/37.

Signed-off-by: Boris Burkov <boris@bur.io>
---
 tests/btrfs/291     | 161 ++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/291.out |   2 +
 2 files changed, 163 insertions(+)
 create mode 100755 tests/btrfs/291
 create mode 100644 tests/btrfs/291.out
diff mbox series

Patch

diff --git a/tests/btrfs/291 b/tests/btrfs/291
new file mode 100755
index 00000000..1bb3f1b3
--- /dev/null
+++ b/tests/btrfs/291
@@ -0,0 +1,161 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Facebook, Inc. All Rights Reserved.
+#
+# FS QA Test 291
+#
+# Test btrfs consistency after each FUA while enabling verity on a file
+# This test works by following the pattern in log-writes/replay-individual.sh:
+# 1. run a workload (verity + sync) while logging to the log device
+# 2. replay an entry to the replay device
+# 3. snapshot the replay device to the snapshot device
+# 4. run destructive tests on the snapshot device (e.g. mount with orphans)
+# 5. goto 2
+#
+. ./common/preamble
+_begin_fstest auto verity
+
+# Override the default cleanup function.
+_cleanup()
+{
+	cd /
+	_log_writes_cleanup &> /dev/null
+	rm -f $img
+	$LVM_PROG vgremove -f -y $vgname >>$seqres.full 2>&1
+	losetup -d $loop_dev >>$seqres.full 2>&1
+}
+
+# Import common functions.
+. ./common/filter
+. ./common/attr
+. ./common/dmlogwrites
+. ./common/verity
+
+# real QA test starts here
+_supported_fs btrfs
+
+_require_scratch
+_require_test
+_require_log_writes
+_require_dm_target snapshot
+_require_command $LVM_PROG lvm
+_require_scratch_verity
+_require_btrfs_command inspect-internal dump-tree
+_require_test_program "log-writes/replay-log"
+
+sync_loop() {
+	i=$1
+	[ -z "$i" ] && _fail "sync loop needs a number of iterations"
+	while [ $i -gt 0 ]
+	do
+		$XFS_IO_PROG -c sync $SCRATCH_MNT
+		let i-=1
+	done
+}
+
+dump_tree() {
+	local dev=$1
+	$BTRFS_UTIL_PROG inspect-internal dump-tree $dev
+}
+
+count_item() {
+	local dev=$1
+	local item=$2
+	dump_tree $dev | grep -c $item
+}
+
+_log_writes_init $SCRATCH_DEV
+_log_writes_mkfs
+_log_writes_mount
+
+f=$SCRATCH_MNT/fsv
+MB=$((1024 * 1024))
+img=$TEST_DIR/$$.img
+$XFS_IO_PROG -fc "pwrite -q 0 $((10 * $MB))" $f
+$XFS_IO_PROG -c sync $SCRATCH_MNT
+sync_loop 10 &
+sync_proc=$!
+_fsv_enable $f
+$XFS_IO_PROG -c sync $SCRATCH_MNT
+wait $sync_proc
+
+_log_writes_unmount
+_log_writes_remove
+
+# the snapshot and the replay will each be the size of the log writes dev
+# so we create a loop device of size 2 * logwrites and then split it into
+# replay and snapshot with lvm.
+log_writes_blocks=$(blockdev --getsz $LOGWRITES_DEV)
+replay_bytes=$((512 * $log_writes_blocks))
+img_bytes=$((2 * $replay_bytes))
+
+$XFS_IO_PROG -fc "pwrite -q -S 0 $img_bytes $MB" $img >>$seqres.full 2>&1 || \
+	_fail "failed to create image for loop device"
+loop_dev=$(losetup -f --show $img)
+vgname=vg_replay
+lvname=lv_replay
+replay_dev=/dev/mapper/vg_replay-lv_replay
+snapname=lv_snap
+snap_dev=/dev/mapper/vg_replay-$snapname
+
+$LVM_PROG vgcreate -f $vgname $loop_dev >>$seqres.full 2>&1 || _fail "failed to vgcreate $vgname"
+$LVM_PROG lvcreate -L "$replay_bytes"B -n $lvname $vgname -y >>$seqres.full 2>&1 || \
+	_fail "failed to lvcreate $lvname"
+$UDEV_SETTLE_PROG >>$seqres.full 2>&1
+
+replay_log_prog=$here/src/log-writes/replay-log
+num_entries=$($replay_log_prog --log $LOGWRITES_DEV --num-entries)
+entry=$($replay_log_prog --log $LOGWRITES_DEV --replay $replay_dev --find --end-mark mkfs | cut -d@ -f1)
+$replay_log_prog --log $LOGWRITES_DEV --replay $replay_dev --limit $entry || \
+	_fail "failed to replay to start entry $entry"
+let entry+=1
+
+# state = 0: verity hasn't started
+# state = 1: verity underway
+# state = 2: verity done
+state=0
+while [ $entry -lt $num_entries ];
+do
+	$replay_log_prog --limit 1 --log $LOGWRITES_DEV --replay $replay_dev --start $entry || \
+		_fail "failed to take replay step at entry: $entry"
+
+	$LVM_PROG lvcreate -s -L 4M -n $snapname $vgname/$lvname >>$seqres.full 2>&1 || \
+		_fail "Failed to create snapshot"
+	$UDEV_SETTLE_PROG >>$seqres.full 2>&1
+
+	orphan=$(count_item $snap_dev ORPHAN)
+	if [ $state -eq 0 ]; then
+		[ $orphan -gt 0 ] && state=1
+	fi
+
+	pre_mount=$(count_item $snap_dev UNKNOWN.3[67])
+	_mount $snap_dev $SCRATCH_MNT || _fail "mount failed at entry $entry"
+	fsverity measure $SCRATCH_MNT/fsv >>$seqres.full 2>&1
+	measured=$?
+	umount $SCRATCH_MNT
+	[ $state -eq 1 ] && [ $measured -eq 0 ] && state=2
+	[ $state -eq 2 ] && ([ $measured -eq 0 ] || _fail "verity done, but measurement failed at entry $entry")
+	post_mount=$(count_item $snap_dev UNKNOWN.3[67])
+
+	echo "entry: $entry, state: $state, orphan: $orphan, pre_mount: $pre_mount, post_mount: $post_mount" >> $seqres.full
+
+	if [ $state -eq 1 ]; then
+		[ $post_mount -eq 0 ] || \
+			_fail "mount failed to clear under-construction merkle items pre: $pre_mount, post: $post_mount at entry $entry";
+	fi
+	if [ $state -eq 2 ]; then
+		[ $pre_mount -gt 0 ] || \
+			_fail "expected to have verity items before mount at entry $entry"
+		[ $pre_mount -eq $post_mount ] || \
+			_fail "mount cleared merkle items after verity was enabled $pre_mount vs $post_mount at entry $entry";
+	fi
+
+	let entry+=1
+	$LVM_PROG lvremove $vgname/$snapname -y >>$seqres.full
+done
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/291.out b/tests/btrfs/291.out
new file mode 100644
index 00000000..04605c70
--- /dev/null
+++ b/tests/btrfs/291.out
@@ -0,0 +1,2 @@ 
+QA output created by 291
+Silence is golden