| Message ID | bedb9edc01e8938544fa5c73f716f823764c3fd9.1712549642.git.anand.jain@oracle.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] common/filter.btrfs: introduce _filter_snapshot | expand |
On Mon, 8 Apr 2024 12:32:58 +0800, Anand Jain wrote: > Btrfs-progs commit 5f87b467a9e7 ("subvolume: output the prompt line only > when the ioctl succeeded") changed the output for snapshot command, > updating the golden outputs. > > Create a helper filter to ensure the test cases pass on older btrfs-progs. > > Another option is to remove the 'btrfs subvolume snapshot' command output > from the golden output and redirect it to /dev/null, but this strays from > the bug-fix objective. > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > --- > v2: The missed testcases included now. > Merged following two patches in v1: > common/filter.btrfs: add a new _filter_snapshot > btrfs: create snapshot fix golden output Reviewed-by: David Disseldorp <ddiss@suse.de> I think retaining the golden output makes sense for this.
在 2024/4/8 14:02, Anand Jain 写道: > Btrfs-progs commit 5f87b467a9e7 ("subvolume: output the prompt line only > when the ioctl succeeded") changed the output for snapshot command, > updating the golden outputs. > > Create a helper filter to ensure the test cases pass on older btrfs-progs. > > Another option is to remove the 'btrfs subvolume snapshot' command output > from the golden output and redirect it to /dev/null, but this strays from > the bug-fix objective. > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > --- > v2: The missed testcases included now. > Merged following two patches in v1: > common/filter.btrfs: add a new _filter_snapshot > btrfs: create snapshot fix golden output Still I do not think this is correct way to go. 3 points for my objection: - Most test cases are already doing the redirection for "btrfs subvolume" command group Check my patch's commit message, overall the touched ones are less than 25% of all the "btrfs subvolume snapshot" calls. - Missing handling for "btrfs subvolume delete" Sure you can add new filters, but I do not think it's worthy just a new filter. - How to enforce the filters for the future test cases? Good luck if you're really pushing everyone to use the new filter. On the other hand, it's pretty instintive to just redirect the output. > > common/filter.btrfs | 9 +++++++++ > tests/btrfs/001 | 3 ++- > tests/btrfs/001.out | 2 +- > tests/btrfs/152 | 6 +++--- > tests/btrfs/152.out | 4 ++-- > tests/btrfs/168 | 6 +++--- > tests/btrfs/168.out | 4 ++-- > tests/btrfs/169 | 6 +++--- > tests/btrfs/169.out | 4 ++-- > tests/btrfs/170 | 4 ++-- > tests/btrfs/170.out | 2 +- > tests/btrfs/187 | 6 +++--- > tests/btrfs/187.out | 4 ++-- > tests/btrfs/188 | 8 ++++---- > tests/btrfs/188.out | 4 ++-- > tests/btrfs/189 | 4 ++-- > tests/btrfs/189.out | 2 +- > tests/btrfs/191 | 6 +++--- > tests/btrfs/191.out | 4 ++-- > tests/btrfs/200 | 6 +++--- > tests/btrfs/200.out | 4 ++-- > tests/btrfs/202 | 4 ++-- > tests/btrfs/202.out | 2 +- > tests/btrfs/203 | 6 +++--- > tests/btrfs/203.out | 4 ++-- > tests/btrfs/226 | 4 ++-- > tests/btrfs/226.out | 2 +- > tests/btrfs/276 | 2 +- > tests/btrfs/276.out | 2 +- > tests/btrfs/280 | 4 ++-- > tests/btrfs/280.out | 2 +- > tests/btrfs/281 | 4 ++-- > tests/btrfs/281.out | 2 +- > tests/btrfs/283 | 4 ++-- > tests/btrfs/283.out | 2 +- > tests/btrfs/287 | 4 ++-- > tests/btrfs/287.out | 4 ++-- > tests/btrfs/293 | 4 ++-- > tests/btrfs/293.out | 4 ++-- > tests/btrfs/300 | 2 +- > tests/btrfs/300.out | 2 +- > tests/btrfs/302 | 4 ++-- > tests/btrfs/302.out | 2 +- > tests/btrfs/314 | 2 +- > tests/btrfs/314.out | 4 ++-- > 45 files changed, 92 insertions(+), 82 deletions(-) > > diff --git a/common/filter.btrfs b/common/filter.btrfs > index 9ef9676175c9..7042edf16d2a 100644 > --- a/common/filter.btrfs > +++ b/common/filter.btrfs > @@ -156,5 +156,14 @@ _filter_device_add() > > } > > +_filter_snapshot() > +{ > + # btrfs-progs commit 5f87b467a9e7 ("btrfs-progs: subvolume: output the > + # prompt line only when the ioctl succeeded") changed the output for > + # btrfs subvolume snapshot, ensure that the latest fstests continue to > + # work on older btrfs-progs without the above commit. > + _filter_testdir_and_scratch | sed -e "s/Create a/Create/g" > +} > + > # make sure this script returns success > /bin/true > diff --git a/tests/btrfs/001 b/tests/btrfs/001 > index 6c2639990373..cfcf2ade4590 100755 > --- a/tests/btrfs/001 > +++ b/tests/btrfs/001 > @@ -26,7 +26,8 @@ dd if=/dev/zero of=$SCRATCH_MNT/foo bs=1M count=1 &> /dev/null > echo "List root dir" > ls $SCRATCH_MNT > echo "Creating snapshot of root dir" > -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch > +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | \ > + _filter_snapshot > echo "List root dir after snapshot" > ls $SCRATCH_MNT > echo "List snapshot dir" > diff --git a/tests/btrfs/001.out b/tests/btrfs/001.out > index c782bde96091..c9e32265da6a 100644 > --- a/tests/btrfs/001.out > +++ b/tests/btrfs/001.out > @@ -3,7 +3,7 @@ Creating file foo in root dir > List root dir > foo > Creating snapshot of root dir > -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > List root dir after snapshot > foo > snap > diff --git a/tests/btrfs/152 b/tests/btrfs/152 > index 75f576c3cfca..b89fe361e84e 100755 > --- a/tests/btrfs/152 > +++ b/tests/btrfs/152 > @@ -11,7 +11,7 @@ > _begin_fstest auto quick metadata qgroup send > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > > # real QA test starts here > _supported_fs btrfs > @@ -32,9 +32,9 @@ touch $SCRATCH_MNT/subvol{1,2}/foo > > # Create base snapshots and send them > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \ > - $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch > + $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_snapshot > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \ > - $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch > + $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_snapshot > for recv in recv1_1 recv1_2 recv2_1 recv2_2; do > $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> /dev/null | \ > $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch > diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out > index a95bb5797162..763d38cefe65 100644 > --- a/tests/btrfs/152.out > +++ b/tests/btrfs/152.out > @@ -5,8 +5,8 @@ Create subvolume 'SCRATCH_MNT/recv1_1' > Create subvolume 'SCRATCH_MNT/recv1_2' > Create subvolume 'SCRATCH_MNT/recv2_1' > Create subvolume 'SCRATCH_MNT/recv2_2' > -Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1' > -Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1' > +Create readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1' > +Create readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1' > At subvol 1 > At subvol 1 > At subvol 1 > diff --git a/tests/btrfs/168 b/tests/btrfs/168 > index acc58b51ee39..78bc9b8f81bb 100755 > --- a/tests/btrfs/168 > +++ b/tests/btrfs/168 > @@ -20,7 +20,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > > # real QA test starts here > _supported_fs btrfs > @@ -74,7 +74,7 @@ $BTRFS_UTIL_PROG property set $SCRATCH_MNT/sv1 ro false > # Create a snapshot of the subvolume, to be used later as the parent snapshot > # for an incremental send operation. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 $SCRATCH_MNT/snap1 \ > - | _filter_scratch > + | _filter_snapshot > > # First do a full send of this snapshot. > $FSSUM_PROG -A -f -w $send_files_dir/snap1.fssum $SCRATCH_MNT/snap1 > @@ -88,7 +88,7 @@ $XFS_IO_PROG -c "pwrite -S 0x19 4K 8K" $SCRATCH_MNT/sv1/baz >>$seqres.full > # Create a second snapshot of the subvolume, to be used later as the send > # snapshot of an incremental send operation. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 $SCRATCH_MNT/snap2 \ > - | _filter_scratch > + | _filter_snapshot > > # Temporarily turn the second snapshot to read-write mode and then open a file > # descriptor on its foo file. > diff --git a/tests/btrfs/168.out b/tests/btrfs/168.out > index 6cfce8cd666c..0eccbc3fc416 100644 > --- a/tests/btrfs/168.out > +++ b/tests/btrfs/168.out > @@ -1,9 +1,9 @@ > QA output created by 168 > Create subvolume 'SCRATCH_MNT/sv1' > At subvol SCRATCH_MNT/sv1 > -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' > At subvol SCRATCH_MNT/snap1 > -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' > +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' > At subvol SCRATCH_MNT/snap2 > At subvol sv1 > OK > diff --git a/tests/btrfs/169 b/tests/btrfs/169 > index 009fdaee7c46..e507692fd0c6 100755 > --- a/tests/btrfs/169 > +++ b/tests/btrfs/169 > @@ -20,7 +20,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > > # real QA test starts here > _supported_fs btrfs > @@ -44,7 +44,7 @@ $XFS_IO_PROG -f -c "falloc -k 0 4M" \ > $SCRATCH_MNT/foobar | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 2>&1 \ > | _filter_scratch > > @@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 2>&1 \ > $XFS_IO_PROG -c "fpunch 1M 2M" $SCRATCH_MNT/foobar > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/snap1 -f $send_files_dir/2.snap \ > $SCRATCH_MNT/snap2 2>&1 | _filter_scratch > > diff --git a/tests/btrfs/169.out b/tests/btrfs/169.out > index ba77bf0adbe3..c3467d5162d9 100644 > --- a/tests/btrfs/169.out > +++ b/tests/btrfs/169.out > @@ -1,9 +1,9 @@ > QA output created by 169 > wrote 1048576/1048576 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > At subvol SCRATCH_MNT/snap1 > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > At subvol SCRATCH_MNT/snap2 > File digest in the original filesystem: > d31659e82e87798acd4669a1e0a19d4f SCRATCH_MNT/snap2/foobar > diff --git a/tests/btrfs/170 b/tests/btrfs/170 > index ab105d36fb96..50b6fa8654d4 100755 > --- a/tests/btrfs/170 > +++ b/tests/btrfs/170 > @@ -12,7 +12,7 @@ > _begin_fstest auto quick snapshot prealloc > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > > # real QA test starts here > _supported_fs btrfs > @@ -46,7 +46,7 @@ md5sum $SCRATCH_MNT/foobar | _filter_scratch > > # Create a snapshot of the subvolume where our file is. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > # Cleanly unmount the filesystem. > _scratch_unmount > diff --git a/tests/btrfs/170.out b/tests/btrfs/170.out > index 4c5fd87a8b17..ebdf872c7eb2 100644 > --- a/tests/btrfs/170.out > +++ b/tests/btrfs/170.out > @@ -3,6 +3,6 @@ wrote 131072/131072 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > File digest after write: > 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > File digest after mounting the filesystem again: > 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar > diff --git a/tests/btrfs/187 b/tests/btrfs/187 > index d3cf05a1bd92..f0935c9e6516 100755 > --- a/tests/btrfs/187 > +++ b/tests/btrfs/187 > @@ -17,7 +17,7 @@ _begin_fstest auto send dedupe clone balance > > # Import common functions. > . ./common/attr > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > > # real QA test starts here > @@ -152,7 +152,7 @@ done > wait ${create_pids[@]} > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \ > - | _filter_scratch > + | _filter_snapshot > > # Add some more files, so that that are substantial differences between the > # two test snapshots used for an incremental send later. > @@ -184,7 +184,7 @@ done > wait ${setxattr_pids[@]} > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 \ > - | _filter_scratch > + | _filter_snapshot > > full_send_loop 5 & > full_send_pid=$! > diff --git a/tests/btrfs/187.out b/tests/btrfs/187.out > index ab522cfe7e8c..208cfb212b8f 100644 > --- a/tests/btrfs/187.out > +++ b/tests/btrfs/187.out > @@ -1,3 +1,3 @@ > QA output created by 187 > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > diff --git a/tests/btrfs/188 b/tests/btrfs/188 > index fcaf84b15053..feeb4397c234 100755 > --- a/tests/btrfs/188 > +++ b/tests/btrfs/188 > @@ -21,7 +21,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > > # real QA test starts here > _supported_fs btrfs > @@ -45,16 +45,16 @@ $XFS_IO_PROG -f -c "pwrite -S 0xab 0 500K" $SCRATCH_MNT/foobar | _filter_xfs_io > $XFS_IO_PROG -c "falloc -k 1200K 800K" $SCRATCH_MNT/foobar > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > # Now punch a hole that drops all the extents within the file's size. > $XFS_IO_PROG -c "fpunch 0 500K" $SCRATCH_MNT/foobar > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ > $SCRATCH_MNT/incr 2>&1 | _filter_scratch > diff --git a/tests/btrfs/188.out b/tests/btrfs/188.out > index 260988e60084..586543cfde61 100644 > --- a/tests/btrfs/188.out > +++ b/tests/btrfs/188.out > @@ -1,9 +1,9 @@ > QA output created by 188 > wrote 512000/512000 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > At subvol SCRATCH_MNT/base > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > At subvol SCRATCH_MNT/incr > File digest in the original filesystem: > 816df6f64deba63b029ca19d880ee10a SCRATCH_MNT/incr/foobar > diff --git a/tests/btrfs/189 b/tests/btrfs/189 > index ec6e56fa0020..244ca84299fa 100755 > --- a/tests/btrfs/189 > +++ b/tests/btrfs/189 > @@ -23,7 +23,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > > # real QA test starts here > @@ -46,7 +46,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0x4d 0 2M" $SCRATCH_MNT/baz | _filter_xfs_io > $XFS_IO_PROG -f -c "pwrite -S 0xe2 0 2M" $SCRATCH_MNT/zoo | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ > | _filter_scratch > diff --git a/tests/btrfs/189.out b/tests/btrfs/189.out > index 79c70b03a1ba..a516167578e4 100644 > --- a/tests/btrfs/189.out > +++ b/tests/btrfs/189.out > @@ -7,7 +7,7 @@ wrote 2097152/2097152 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > wrote 2097152/2097152 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > At subvol SCRATCH_MNT/base > linked 131072/131072 bytes at offset 655360 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > diff --git a/tests/btrfs/191 b/tests/btrfs/191 > index 3c565d0ad209..9c1fd80b7583 100755 > --- a/tests/btrfs/191 > +++ b/tests/btrfs/191 > @@ -19,7 +19,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > > # real QA test starts here > @@ -44,7 +44,7 @@ $XFS_IO_PROG -c "pwrite -S 0xb8 512K 512K" $SCRATCH_MNT/foo | _filter_xfs_io > > # Create the base snapshot and the parent send stream from it. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/mysnap1 2>&1 \ > | _filter_scratch > @@ -55,7 +55,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xb8 0 1M" $SCRATCH_MNT/bar | _filter_xfs_io > # Create the second snapshot, used for the incremental send, before doing the > # file deduplication. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2 \ > - | _filter_scratch > + | _filter_snapshot > > # Now before creating the incremental send stream: > # > diff --git a/tests/btrfs/191.out b/tests/btrfs/191.out > index 4269803cce1e..ad4d779814f7 100644 > --- a/tests/btrfs/191.out > +++ b/tests/btrfs/191.out > @@ -3,11 +3,11 @@ wrote 524288/524288 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > wrote 524288/524288 bytes at offset 524288 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' > At subvol SCRATCH_MNT/mysnap1 > wrote 1048576/1048576 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' > deduped 524288/524288 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > deduped 524288/524288 bytes at offset 524288 > diff --git a/tests/btrfs/200 b/tests/btrfs/200 > index 5ce3775f2222..3d18165a630f 100755 > --- a/tests/btrfs/200 > +++ b/tests/btrfs/200 > @@ -19,7 +19,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > . ./common/punch > > @@ -52,7 +52,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \ > | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ > | _filter_scratch > @@ -64,7 +64,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \ > | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ > $SCRATCH_MNT/incr 2>&1 | _filter_scratch > diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out > index 3eec567e97fe..5c1cd855fa99 100644 > --- a/tests/btrfs/200.out > +++ b/tests/btrfs/200.out > @@ -5,11 +5,11 @@ linked 65536/65536 bytes at offset 65536 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > wrote 65536/65536 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > At subvol SCRATCH_MNT/base > linked 65536/65536 bytes at offset 65536 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > At subvol SCRATCH_MNT/incr > At subvol base > At snapshot incr > diff --git a/tests/btrfs/202 b/tests/btrfs/202 > index 5f0429f18bf9..57ecbe47c0bb 100755 > --- a/tests/btrfs/202 > +++ b/tests/btrfs/202 > @@ -8,7 +8,7 @@ > . ./common/preamble > _begin_fstest auto quick subvol snapshot > > -. ./common/filter > +. ./common/filter.btrfs > > _supported_fs btrfs > _require_scratch > @@ -28,7 +28,7 @@ _scratch_mount > $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a | _filter_scratch > $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a/b | _filter_scratch > $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT/a $SCRATCH_MNT/c \ > - | _filter_scratch > + | _filter_snapshot > > # Need the dummy entry created so that we get the invalid removal when we rmdir > ls $SCRATCH_MNT/c/b > diff --git a/tests/btrfs/202.out b/tests/btrfs/202.out > index 7f33d49f889c..6b80810e96ed 100644 > --- a/tests/btrfs/202.out > +++ b/tests/btrfs/202.out > @@ -1,4 +1,4 @@ > QA output created by 202 > Create subvolume 'SCRATCH_MNT/a' > Create subvolume 'SCRATCH_MNT/a/b' > -Create a snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' > +Create snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' > diff --git a/tests/btrfs/203 b/tests/btrfs/203 > index e506118e2cd2..e62f09edb570 100755 > --- a/tests/btrfs/203 > +++ b/tests/btrfs/203 > @@ -20,7 +20,7 @@ _cleanup() > } > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > > # real QA test starts here > @@ -44,7 +44,7 @@ _scratch_mount > $XFS_IO_PROG -f -c "pwrite -S 0xf1 0 64K" $SCRATCH_MNT/foobar | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ > | _filter_scratch > @@ -70,7 +70,7 @@ $XFS_IO_PROG -c "pwrite -S 0xab 512K 64K" \ > $SCRATCH_MNT/foobar | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ > $SCRATCH_MNT/incr 2>&1 | _filter_scratch > diff --git a/tests/btrfs/203.out b/tests/btrfs/203.out > index 58739a98cd1b..59c2564bc61b 100644 > --- a/tests/btrfs/203.out > +++ b/tests/btrfs/203.out > @@ -1,7 +1,7 @@ > QA output created by 203 > wrote 65536/65536 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' > At subvol SCRATCH_MNT/base > wrote 65536/65536 bytes at offset 524288 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > @@ -15,7 +15,7 @@ wrote 65536/65536 bytes at offset 786432 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > linked 196608/196608 bytes at offset 196608 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' > At subvol SCRATCH_MNT/incr > File foobar digest in the original filesystem: > 2b76b23b62fdbbbcae1ee37eec84fd7d > diff --git a/tests/btrfs/226 b/tests/btrfs/226 > index 7034fcc7b2a5..f96a832505a4 100755 > --- a/tests/btrfs/226 > +++ b/tests/btrfs/226 > @@ -11,7 +11,7 @@ > _begin_fstest auto quick rw snapshot clone prealloc punch > > # Import common functions. > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > > # real QA test starts here > @@ -51,7 +51,7 @@ $XFS_IO_PROG -s -c "pwrite -S 0xab 0 64K" \ > $SCRATCH_MNT/f2 | _filter_xfs_io > > $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \ > - | _filter_scratch > + | _filter_snapshot > > # Write into the range of the first extent so that that range no longer has a > # shared extent. > diff --git a/tests/btrfs/226.out b/tests/btrfs/226.out > index c63982b0ba4a..1855e5255fce 100644 > --- a/tests/btrfs/226.out > +++ b/tests/btrfs/226.out > @@ -13,7 +13,7 @@ wrote 65536/65536 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > wrote 65536/65536 bytes at offset 65536 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > wrote 65536/65536 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > pwrite: Resource temporarily unavailable > diff --git a/tests/btrfs/276 b/tests/btrfs/276 > index f15f20824350..30799ebe449e 100755 > --- a/tests/btrfs/276 > +++ b/tests/btrfs/276 > @@ -105,7 +105,7 @@ sync > echo "Number of non-shared extents in the whole file: $(count_not_shared_extents)" > > # Creating a snapshot. > -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch > +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_snapshot > > # We have a snapshot, so now all extents should be reported as shared. > echo "Number of shared extents in the whole file: $(count_shared_extents)" > diff --git a/tests/btrfs/276.out b/tests/btrfs/276.out > index 352e06b4d4b2..27ea29bdf87b 100644 > --- a/tests/btrfs/276.out > +++ b/tests/btrfs/276.out > @@ -1,6 +1,6 @@ > QA output created by 276 > Number of non-shared extents in the whole file: 2000 > -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > Number of shared extents in the whole file: 2000 > wrote 65536/65536 bytes at offset 524288 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > diff --git a/tests/btrfs/280 b/tests/btrfs/280 > index fc049adb0b19..4957825b7e4b 100755 > --- a/tests/btrfs/280 > +++ b/tests/btrfs/280 > @@ -15,7 +15,7 @@ > . ./common/preamble > _begin_fstest auto quick compress snapshot fiemap > > -. ./common/filter > +. ./common/filter.btrfs > . ./common/punch # for _filter_fiemap_flags > > _supported_fs btrfs > @@ -37,7 +37,7 @@ _scratch_mount -o compress > $XFS_IO_PROG -f -c "pwrite -b 1M 0 128M" $SCRATCH_MNT/foo | _filter_xfs_io > > # Create a RW snapshot of the default subvolume. > -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch > +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_snapshot > > echo > echo "File foo fiemap before COWing extent:" > diff --git a/tests/btrfs/280.out b/tests/btrfs/280.out > index 5371f3b01551..4f0e5d2287b6 100644 > --- a/tests/btrfs/280.out > +++ b/tests/btrfs/280.out > @@ -1,7 +1,7 @@ > QA output created by 280 > wrote 134217728/134217728 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > > File foo fiemap before COWing extent: > > diff --git a/tests/btrfs/281 b/tests/btrfs/281 > index ddc7d9e8b06d..2943998bee20 100755 > --- a/tests/btrfs/281 > +++ b/tests/btrfs/281 > @@ -15,7 +15,7 @@ > . ./common/preamble > _begin_fstest auto quick send compress clone fiemap > > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > . ./common/punch # for _filter_fiemap_flags > > @@ -53,7 +53,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 0 64K" $SCRATCH_MNT/foo \ > > echo "Creating snapshot and a send stream for it..." > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ > - | _filter_scratch > + | _filter_snapshot > $BTRFS_UTIL_PROG send --compressed-data -f $send_stream $SCRATCH_MNT/snap 2>&1 \ > | _filter_scratch > > diff --git a/tests/btrfs/281.out b/tests/btrfs/281.out > index 2585e3e567db..49c23a00baea 100644 > --- a/tests/btrfs/281.out > +++ b/tests/btrfs/281.out > @@ -6,7 +6,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > linked 65536/65536 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > Creating snapshot and a send stream for it... > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > At subvol SCRATCH_MNT/snap > Creating a new filesystem to receive the send stream... > At subvol snap > diff --git a/tests/btrfs/283 b/tests/btrfs/283 > index 118df08b8958..d9b8c1d24b8f 100755 > --- a/tests/btrfs/283 > +++ b/tests/btrfs/283 > @@ -11,7 +11,7 @@ > . ./common/preamble > _begin_fstest auto quick send clone fiemap > > -. ./common/filter > +. ./common/filter.btrfs > . ./common/reflink > . ./common/punch # for _filter_fiemap_flags > > @@ -58,7 +58,7 @@ $XFS_IO_PROG -c "pwrite -S 0xcd -b 64K 64K 64K" $SCRATCH_MNT/foo | _filter_xfs_i > > echo "Creating snapshot and a send stream for it..." > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ > - | _filter_scratch > + | _filter_snapshot > > $BTRFS_UTIL_PROG send -f $send_stream $SCRATCH_MNT/snap 2>&1 | _filter_scratch > > diff --git a/tests/btrfs/283.out b/tests/btrfs/283.out > index 286dae332eff..37f425bf8312 100644 > --- a/tests/btrfs/283.out > +++ b/tests/btrfs/283.out > @@ -4,7 +4,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > wrote 65536/65536 bytes at offset 65536 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > Creating snapshot and a send stream for it... > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' > At subvol SCRATCH_MNT/snap > Creating a new filesystem to receive the send stream... > At subvol snap > diff --git a/tests/btrfs/287 b/tests/btrfs/287 > index 64e6ef35250c..dec812760917 100755 > --- a/tests/btrfs/287 > +++ b/tests/btrfs/287 > @@ -112,9 +112,9 @@ query_logical_ino -o $bytenr > > # Now create two snapshots and then do some queries. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \ > - | _filter_scratch > + | _filter_snapshot > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 \ > - | _filter_scratch > + | _filter_snapshot > > snap1_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap1) > snap2_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap2) > diff --git a/tests/btrfs/287.out b/tests/btrfs/287.out > index 30eac8fa444c..5798ec5d7c55 100644 > --- a/tests/btrfs/287.out > +++ b/tests/btrfs/287.out > @@ -41,8 +41,8 @@ resolve first extent +3M offset with ignore offset option: > inode 257 offset 16777216 root 5 > inode 257 offset 8388608 root 5 > inode 257 offset 2097152 root 5 > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > resolve first extent: > inode 257 offset 16777216 snap2 > inode 257 offset 8388608 snap2 > diff --git a/tests/btrfs/293 b/tests/btrfs/293 > index 06f96dc414b0..fffdcd53441a 100755 > --- a/tests/btrfs/293 > +++ b/tests/btrfs/293 > @@ -32,9 +32,9 @@ swap_file="$SCRATCH_MNT/swapfile" > _format_swapfile $swap_file $(($(_get_page_size) * 64)) >> $seqres.full > > echo "Creating first snapshot..." > -$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 | _filter_scratch > +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 | _filter_snapshot > echo "Creating second snapshot..." > -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | _filter_scratch > +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | _filter_snapshot > > echo "Activating swap file... (should fail due to snapshots)" > _swapon_file $swap_file 2>&1 | _filter_scratch > diff --git a/tests/btrfs/293.out b/tests/btrfs/293.out > index fd04ac9139b8..7b2947a705e7 100644 > --- a/tests/btrfs/293.out > +++ b/tests/btrfs/293.out > @@ -1,8 +1,8 @@ > QA output created by 293 > Creating first snapshot... > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > Creating second snapshot... > -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' > Activating swap file... (should fail due to snapshots) > swapon: SCRATCH_MNT/swapfile: swapon failed: Invalid argument > Deleting first snapshot... > diff --git a/tests/btrfs/300 b/tests/btrfs/300 > index 8a0eaecf87f7..00ffcb82eae6 100755 > --- a/tests/btrfs/300 > +++ b/tests/btrfs/300 > @@ -43,7 +43,7 @@ $BTRFS_UTIL_PROG subvolume create subvol; > touch subvol/{1,2,3}; > $BTRFS_UTIL_PROG subvolume create subvol/subsubvol; > touch subvol/subsubvol/{4,5,6}; > -$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot; > +$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot | sed -e 's/Create a/Create/g'; > " > > find $test_dir/. -printf "%M %u %g ./%P\n" > diff --git a/tests/btrfs/300.out b/tests/btrfs/300.out > index 6e94447e87ac..06a75bff5ce1 100644 > --- a/tests/btrfs/300.out > +++ b/tests/btrfs/300.out > @@ -1,7 +1,7 @@ > QA output created by 300 > Create subvolume './subvol' > Create subvolume 'subvol/subsubvol' > -Create a snapshot of 'subvol' in './snapshot' > +Create snapshot of 'subvol' in './snapshot' > drwxr-xr-x fsgqa fsgqa ./ > drwxr-xr-x fsgqa fsgqa ./subvol > -rw-r--r-- fsgqa fsgqa ./subvol/1 > diff --git a/tests/btrfs/302 b/tests/btrfs/302 > index f3e6044b5251..52d712ac50de 100755 > --- a/tests/btrfs/302 > +++ b/tests/btrfs/302 > @@ -15,7 +15,7 @@ > . ./common/preamble > _begin_fstest auto quick snapshot subvol > > -. ./common/filter > +. ./common/filter.btrfs > > _supported_fs btrfs > _require_scratch > @@ -46,7 +46,7 @@ $FSSUM_PROG -A -f -w $fssum_file $SCRATCH_MNT/subvol > # Now create a snapshot of the subvolume and make it accessible from within the > # subvolume. > $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol \ > - $SCRATCH_MNT/subvol/snap | _filter_scratch > + $SCRATCH_MNT/subvol/snap | _filter_snapshot > > # Now unmount and mount again the fs. We want to verify we are able to read all > # metadata for the snapshot from disk (no IO failures, etc). > diff --git a/tests/btrfs/302.out b/tests/btrfs/302.out > index 8770aefc99c8..c08f8c135538 100644 > --- a/tests/btrfs/302.out > +++ b/tests/btrfs/302.out > @@ -1,4 +1,4 @@ > QA output created by 302 > Create subvolume 'SCRATCH_MNT/subvol' > -Create a readonly snapshot of 'SCRATCH_MNT/subvol' in 'SCRATCH_MNT/subvol/snap' > +Create readonly snapshot of 'SCRATCH_MNT/subvol' in 'SCRATCH_MNT/subvol/snap' > OK > diff --git a/tests/btrfs/314 b/tests/btrfs/314 > index 887cb69eb79c..598af611d249 100755 > --- a/tests/btrfs/314 > +++ b/tests/btrfs/314 > @@ -43,7 +43,7 @@ send_receive_tempfsid() > > $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' ${src}/foo | _filter_xfs_io > $BTRFS_UTIL_PROG subvolume snapshot -r ${src} ${src}/snap1 | \ > - _filter_testdir_and_scratch > + _filter_snapshot > > echo Send ${src} | _filter_testdir_and_scratch > $BTRFS_UTIL_PROG send -f ${sendfile} ${src}/snap1 2>&1 | \ > diff --git a/tests/btrfs/314.out b/tests/btrfs/314.out > index 21963899c2b2..d29fe51b3ff9 100644 > --- a/tests/btrfs/314.out > +++ b/tests/btrfs/314.out > @@ -3,7 +3,7 @@ QA output created by 314 > From non-tempfsid SCRATCH_MNT to tempfsid TEST_DIR/314/tempfsid_mnt > wrote 9000/9000 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' > Send SCRATCH_MNT > At subvol SCRATCH_MNT/snap1 > Receive TEST_DIR/314/tempfsid_mnt > @@ -14,7 +14,7 @@ Recv: 42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/314/tempfsid_mnt/snap1/foo > From tempfsid TEST_DIR/314/tempfsid_mnt to non-tempfsid SCRATCH_MNT > wrote 9000/9000 bytes at offset 0 > XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > -Create a readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in 'TEST_DIR/314/tempfsid_mnt/snap1' > +Create readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in 'TEST_DIR/314/tempfsid_mnt/snap1' > Send TEST_DIR/314/tempfsid_mnt > At subvol TEST_DIR/314/tempfsid_mnt/snap1 > Receive SCRATCH_MNT
On 4/8/24 16:24, Qu Wenruo wrote: > > > 在 2024/4/8 14:02, Anand Jain 写道: >> Btrfs-progs commit 5f87b467a9e7 ("subvolume: output the prompt line only >> when the ioctl succeeded") changed the output for snapshot command, >> updating the golden outputs. >> >> Create a helper filter to ensure the test cases pass on older >> btrfs-progs. >> >> Another option is to remove the 'btrfs subvolume snapshot' command output >> from the golden output and redirect it to /dev/null, but this strays from >> the bug-fix objective. >> >> Signed-off-by: Anand Jain <anand.jain@oracle.com> >> --- >> v2: The missed testcases included now. >> Merged following two patches in v1: >> common/filter.btrfs: add a new _filter_snapshot >> btrfs: create snapshot fix golden output > > Still I do not think this is correct way to go. > > 3 points for my objection: > > - Most test cases are already doing the redirection for "btrfs > subvolume" command group > Check my patch's commit message, overall the touched ones are less > than 25% of all the "btrfs subvolume snapshot" calls. > I observed that. However, as I mentioned in the change log, the objective of this patch is to make test cases work with both the older and newer versions of btrfs-progs only. So, not a good idea to remove the golden output completely. > - Missing handling for "btrfs subvolume delete" > Sure you can add new filters, but I do not think it's worthy just a > new filter. Sorry, but test cases using 'btrfs subvolume delete' (without redirection) aren't failing. Also, there is no change in the output of 'btrfs subvolume delete'. Or perhaps I didn't understand what you meant. > > - How to enforce the filters for the future test cases? > Good luck if you're really pushing everyone to use the new filter. > On the other hand, it's pretty instintive to just redirect the output. Unfortunately, that has been the core fundamental design in fstests, and I don't intend to change it in a patch meant to fix a bug. It seems that we need to maintain the golden output fundamentals until we find a better alternative or one that is reasonable enough to not verify the output on a per-command basis, which I believe is your point of view. I understand that. Also, commented, we could use '_run_btrfs_util_prog subvolume xxx'. This would mean no golden output. But as I mentioned, let's not address that objective within this bug fix. Thanks, -Anand >> common/filter.btrfs | 9 +++++++++ >> tests/btrfs/001 | 3 ++- >> tests/btrfs/001.out | 2 +- >> tests/btrfs/152 | 6 +++--- >> tests/btrfs/152.out | 4 ++-- >> tests/btrfs/168 | 6 +++--- >> tests/btrfs/168.out | 4 ++-- >> tests/btrfs/169 | 6 +++--- >> tests/btrfs/169.out | 4 ++-- >> tests/btrfs/170 | 4 ++-- >> tests/btrfs/170.out | 2 +- >> tests/btrfs/187 | 6 +++--- >> tests/btrfs/187.out | 4 ++-- >> tests/btrfs/188 | 8 ++++---- >> tests/btrfs/188.out | 4 ++-- >> tests/btrfs/189 | 4 ++-- >> tests/btrfs/189.out | 2 +- >> tests/btrfs/191 | 6 +++--- >> tests/btrfs/191.out | 4 ++-- >> tests/btrfs/200 | 6 +++--- >> tests/btrfs/200.out | 4 ++-- >> tests/btrfs/202 | 4 ++-- >> tests/btrfs/202.out | 2 +- >> tests/btrfs/203 | 6 +++--- >> tests/btrfs/203.out | 4 ++-- >> tests/btrfs/226 | 4 ++-- >> tests/btrfs/226.out | 2 +- >> tests/btrfs/276 | 2 +- >> tests/btrfs/276.out | 2 +- >> tests/btrfs/280 | 4 ++-- >> tests/btrfs/280.out | 2 +- >> tests/btrfs/281 | 4 ++-- >> tests/btrfs/281.out | 2 +- >> tests/btrfs/283 | 4 ++-- >> tests/btrfs/283.out | 2 +- >> tests/btrfs/287 | 4 ++-- >> tests/btrfs/287.out | 4 ++-- >> tests/btrfs/293 | 4 ++-- >> tests/btrfs/293.out | 4 ++-- >> tests/btrfs/300 | 2 +- >> tests/btrfs/300.out | 2 +- >> tests/btrfs/302 | 4 ++-- >> tests/btrfs/302.out | 2 +- >> tests/btrfs/314 | 2 +- >> tests/btrfs/314.out | 4 ++-- >> 45 files changed, 92 insertions(+), 82 deletions(-) >> >> diff --git a/common/filter.btrfs b/common/filter.btrfs >> index 9ef9676175c9..7042edf16d2a 100644 >> --- a/common/filter.btrfs >> +++ b/common/filter.btrfs >> @@ -156,5 +156,14 @@ _filter_device_add() >> >> } >> >> +_filter_snapshot() >> +{ >> + # btrfs-progs commit 5f87b467a9e7 ("btrfs-progs: subvolume: >> output the >> + # prompt line only when the ioctl succeeded") changed the output for >> + # btrfs subvolume snapshot, ensure that the latest fstests >> continue to >> + # work on older btrfs-progs without the above commit. >> + _filter_testdir_and_scratch | sed -e "s/Create a/Create/g" >> +} >> + >> # make sure this script returns success >> /bin/true >> diff --git a/tests/btrfs/001 b/tests/btrfs/001 >> index 6c2639990373..cfcf2ade4590 100755 >> --- a/tests/btrfs/001 >> +++ b/tests/btrfs/001 >> @@ -26,7 +26,8 @@ dd if=/dev/zero of=$SCRATCH_MNT/foo bs=1M count=1 &> >> /dev/null >> echo "List root dir" >> ls $SCRATCH_MNT >> echo "Creating snapshot of root dir" >> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >> _filter_scratch >> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | \ >> + _filter_snapshot >> echo "List root dir after snapshot" >> ls $SCRATCH_MNT >> echo "List snapshot dir" >> diff --git a/tests/btrfs/001.out b/tests/btrfs/001.out >> index c782bde96091..c9e32265da6a 100644 >> --- a/tests/btrfs/001.out >> +++ b/tests/btrfs/001.out >> @@ -3,7 +3,7 @@ Creating file foo in root dir >> List root dir >> foo >> Creating snapshot of root dir >> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> List root dir after snapshot >> foo >> snap >> diff --git a/tests/btrfs/152 b/tests/btrfs/152 >> index 75f576c3cfca..b89fe361e84e 100755 >> --- a/tests/btrfs/152 >> +++ b/tests/btrfs/152 >> @@ -11,7 +11,7 @@ >> _begin_fstest auto quick metadata qgroup send >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> >> # real QA test starts here >> _supported_fs btrfs >> @@ -32,9 +32,9 @@ touch $SCRATCH_MNT/subvol{1,2}/foo >> >> # Create base snapshots and send them >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \ >> - $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch >> + $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_snapshot >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \ >> - $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch >> + $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_snapshot >> for recv in recv1_1 recv1_2 recv2_1 recv2_2; do >> $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> >> /dev/null | \ >> $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch >> diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out >> index a95bb5797162..763d38cefe65 100644 >> --- a/tests/btrfs/152.out >> +++ b/tests/btrfs/152.out >> @@ -5,8 +5,8 @@ Create subvolume 'SCRATCH_MNT/recv1_1' >> Create subvolume 'SCRATCH_MNT/recv1_2' >> Create subvolume 'SCRATCH_MNT/recv2_1' >> Create subvolume 'SCRATCH_MNT/recv2_2' >> -Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in >> 'SCRATCH_MNT/subvol1/.snapshots/1' >> -Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in >> 'SCRATCH_MNT/subvol2/.snapshots/1' >> +Create readonly snapshot of 'SCRATCH_MNT/subvol1' in >> 'SCRATCH_MNT/subvol1/.snapshots/1' >> +Create readonly snapshot of 'SCRATCH_MNT/subvol2' in >> 'SCRATCH_MNT/subvol2/.snapshots/1' >> At subvol 1 >> At subvol 1 >> At subvol 1 >> diff --git a/tests/btrfs/168 b/tests/btrfs/168 >> index acc58b51ee39..78bc9b8f81bb 100755 >> --- a/tests/btrfs/168 >> +++ b/tests/btrfs/168 >> @@ -20,7 +20,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> >> # real QA test starts here >> _supported_fs btrfs >> @@ -74,7 +74,7 @@ $BTRFS_UTIL_PROG property set $SCRATCH_MNT/sv1 ro false >> # Create a snapshot of the subvolume, to be used later as the parent >> snapshot >> # for an incremental send operation. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 >> $SCRATCH_MNT/snap1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # First do a full send of this snapshot. >> $FSSUM_PROG -A -f -w $send_files_dir/snap1.fssum $SCRATCH_MNT/snap1 >> @@ -88,7 +88,7 @@ $XFS_IO_PROG -c "pwrite -S 0x19 4K 8K" >> $SCRATCH_MNT/sv1/baz >>$seqres.full >> # Create a second snapshot of the subvolume, to be used later as the >> send >> # snapshot of an incremental send operation. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 >> $SCRATCH_MNT/snap2 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Temporarily turn the second snapshot to read-write mode and then >> open a file >> # descriptor on its foo file. >> diff --git a/tests/btrfs/168.out b/tests/btrfs/168.out >> index 6cfce8cd666c..0eccbc3fc416 100644 >> --- a/tests/btrfs/168.out >> +++ b/tests/btrfs/168.out >> @@ -1,9 +1,9 @@ >> QA output created by 168 >> Create subvolume 'SCRATCH_MNT/sv1' >> At subvol SCRATCH_MNT/sv1 >> -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' >> At subvol SCRATCH_MNT/snap1 >> -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' >> +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' >> At subvol SCRATCH_MNT/snap2 >> At subvol sv1 >> OK >> diff --git a/tests/btrfs/169 b/tests/btrfs/169 >> index 009fdaee7c46..e507692fd0c6 100755 >> --- a/tests/btrfs/169 >> +++ b/tests/btrfs/169 >> @@ -20,7 +20,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> >> # real QA test starts here >> _supported_fs btrfs >> @@ -44,7 +44,7 @@ $XFS_IO_PROG -f -c "falloc -k 0 4M" \ >> $SCRATCH_MNT/foobar | _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap1 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 >> 2>&1 \ >> | _filter_scratch >> >> @@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap >> $SCRATCH_MNT/snap1 2>&1 \ >> $XFS_IO_PROG -c "fpunch 1M 2M" $SCRATCH_MNT/foobar >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap2 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/snap1 -f $send_files_dir/2.snap \ >> $SCRATCH_MNT/snap2 2>&1 | _filter_scratch >> >> diff --git a/tests/btrfs/169.out b/tests/btrfs/169.out >> index ba77bf0adbe3..c3467d5162d9 100644 >> --- a/tests/btrfs/169.out >> +++ b/tests/btrfs/169.out >> @@ -1,9 +1,9 @@ >> QA output created by 169 >> wrote 1048576/1048576 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> At subvol SCRATCH_MNT/snap1 >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> At subvol SCRATCH_MNT/snap2 >> File digest in the original filesystem: >> d31659e82e87798acd4669a1e0a19d4f SCRATCH_MNT/snap2/foobar >> diff --git a/tests/btrfs/170 b/tests/btrfs/170 >> index ab105d36fb96..50b6fa8654d4 100755 >> --- a/tests/btrfs/170 >> +++ b/tests/btrfs/170 >> @@ -12,7 +12,7 @@ >> _begin_fstest auto quick snapshot prealloc >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> >> # real QA test starts here >> _supported_fs btrfs >> @@ -46,7 +46,7 @@ md5sum $SCRATCH_MNT/foobar | _filter_scratch >> >> # Create a snapshot of the subvolume where our file is. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Cleanly unmount the filesystem. >> _scratch_unmount >> diff --git a/tests/btrfs/170.out b/tests/btrfs/170.out >> index 4c5fd87a8b17..ebdf872c7eb2 100644 >> --- a/tests/btrfs/170.out >> +++ b/tests/btrfs/170.out >> @@ -3,6 +3,6 @@ wrote 131072/131072 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> File digest after write: >> 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> File digest after mounting the filesystem again: >> 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar >> diff --git a/tests/btrfs/187 b/tests/btrfs/187 >> index d3cf05a1bd92..f0935c9e6516 100755 >> --- a/tests/btrfs/187 >> +++ b/tests/btrfs/187 >> @@ -17,7 +17,7 @@ _begin_fstest auto send dedupe clone balance >> >> # Import common functions. >> . ./common/attr >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> >> # real QA test starts here >> @@ -152,7 +152,7 @@ done >> wait ${create_pids[@]} >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Add some more files, so that that are substantial differences >> between the >> # two test snapshots used for an incremental send later. >> @@ -184,7 +184,7 @@ done >> wait ${setxattr_pids[@]} >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap2 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> full_send_loop 5 & >> full_send_pid=$! >> diff --git a/tests/btrfs/187.out b/tests/btrfs/187.out >> index ab522cfe7e8c..208cfb212b8f 100644 >> --- a/tests/btrfs/187.out >> +++ b/tests/btrfs/187.out >> @@ -1,3 +1,3 @@ >> QA output created by 187 >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> diff --git a/tests/btrfs/188 b/tests/btrfs/188 >> index fcaf84b15053..feeb4397c234 100755 >> --- a/tests/btrfs/188 >> +++ b/tests/btrfs/188 >> @@ -21,7 +21,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> >> # real QA test starts here >> _supported_fs btrfs >> @@ -45,16 +45,16 @@ $XFS_IO_PROG -f -c "pwrite -S 0xab 0 500K" >> $SCRATCH_MNT/foobar | _filter_xfs_io >> $XFS_IO_PROG -c "falloc -k 1200K 800K" $SCRATCH_MNT/foobar >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/base 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >> 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Now punch a hole that drops all the extents within the file's size. >> $XFS_IO_PROG -c "fpunch 0 500K" $SCRATCH_MNT/foobar >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/incr 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >> diff --git a/tests/btrfs/188.out b/tests/btrfs/188.out >> index 260988e60084..586543cfde61 100644 >> --- a/tests/btrfs/188.out >> +++ b/tests/btrfs/188.out >> @@ -1,9 +1,9 @@ >> QA output created by 188 >> wrote 512000/512000 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> At subvol SCRATCH_MNT/base >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> At subvol SCRATCH_MNT/incr >> File digest in the original filesystem: >> 816df6f64deba63b029ca19d880ee10a SCRATCH_MNT/incr/foobar >> diff --git a/tests/btrfs/189 b/tests/btrfs/189 >> index ec6e56fa0020..244ca84299fa 100755 >> --- a/tests/btrfs/189 >> +++ b/tests/btrfs/189 >> @@ -23,7 +23,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> >> # real QA test starts here >> @@ -46,7 +46,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0x4d 0 2M" >> $SCRATCH_MNT/baz | _filter_xfs_io >> $XFS_IO_PROG -f -c "pwrite -S 0xe2 0 2M" $SCRATCH_MNT/zoo | >> _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/base 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >> 2>&1 \ >> | _filter_scratch >> diff --git a/tests/btrfs/189.out b/tests/btrfs/189.out >> index 79c70b03a1ba..a516167578e4 100644 >> --- a/tests/btrfs/189.out >> +++ b/tests/btrfs/189.out >> @@ -7,7 +7,7 @@ wrote 2097152/2097152 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> wrote 2097152/2097152 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> At subvol SCRATCH_MNT/base >> linked 131072/131072 bytes at offset 655360 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> diff --git a/tests/btrfs/191 b/tests/btrfs/191 >> index 3c565d0ad209..9c1fd80b7583 100755 >> --- a/tests/btrfs/191 >> +++ b/tests/btrfs/191 >> @@ -19,7 +19,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> >> # real QA test starts here >> @@ -44,7 +44,7 @@ $XFS_IO_PROG -c "pwrite -S 0xb8 512K 512K" >> $SCRATCH_MNT/foo | _filter_xfs_io >> >> # Create the base snapshot and the parent send stream from it. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/mysnap1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/mysnap1 >> 2>&1 \ >> | _filter_scratch >> @@ -55,7 +55,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xb8 0 1M" >> $SCRATCH_MNT/bar | _filter_xfs_io >> # Create the second snapshot, used for the incremental send, before >> doing the >> # file deduplication. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/mysnap2 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Now before creating the incremental send stream: >> # >> diff --git a/tests/btrfs/191.out b/tests/btrfs/191.out >> index 4269803cce1e..ad4d779814f7 100644 >> --- a/tests/btrfs/191.out >> +++ b/tests/btrfs/191.out >> @@ -3,11 +3,11 @@ wrote 524288/524288 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> wrote 524288/524288 bytes at offset 524288 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' >> At subvol SCRATCH_MNT/mysnap1 >> wrote 1048576/1048576 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' >> deduped 524288/524288 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> deduped 524288/524288 bytes at offset 524288 >> diff --git a/tests/btrfs/200 b/tests/btrfs/200 >> index 5ce3775f2222..3d18165a630f 100755 >> --- a/tests/btrfs/200 >> +++ b/tests/btrfs/200 >> @@ -19,7 +19,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> . ./common/punch >> >> @@ -52,7 +52,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" >> $SCRATCH_MNT/bar \ >> | _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/base 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >> 2>&1 \ >> | _filter_scratch >> @@ -64,7 +64,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" >> $SCRATCH_MNT/bar \ >> | _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/incr 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >> diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out >> index 3eec567e97fe..5c1cd855fa99 100644 >> --- a/tests/btrfs/200.out >> +++ b/tests/btrfs/200.out >> @@ -5,11 +5,11 @@ linked 65536/65536 bytes at offset 65536 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> wrote 65536/65536 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> At subvol SCRATCH_MNT/base >> linked 65536/65536 bytes at offset 65536 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> At subvol SCRATCH_MNT/incr >> At subvol base >> At snapshot incr >> diff --git a/tests/btrfs/202 b/tests/btrfs/202 >> index 5f0429f18bf9..57ecbe47c0bb 100755 >> --- a/tests/btrfs/202 >> +++ b/tests/btrfs/202 >> @@ -8,7 +8,7 @@ >> . ./common/preamble >> _begin_fstest auto quick subvol snapshot >> >> -. ./common/filter >> +. ./common/filter.btrfs >> >> _supported_fs btrfs >> _require_scratch >> @@ -28,7 +28,7 @@ _scratch_mount >> $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a | _filter_scratch >> $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a/b | _filter_scratch >> $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT/a $SCRATCH_MNT/c \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Need the dummy entry created so that we get the invalid removal >> when we rmdir >> ls $SCRATCH_MNT/c/b >> diff --git a/tests/btrfs/202.out b/tests/btrfs/202.out >> index 7f33d49f889c..6b80810e96ed 100644 >> --- a/tests/btrfs/202.out >> +++ b/tests/btrfs/202.out >> @@ -1,4 +1,4 @@ >> QA output created by 202 >> Create subvolume 'SCRATCH_MNT/a' >> Create subvolume 'SCRATCH_MNT/a/b' >> -Create a snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' >> +Create snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' >> diff --git a/tests/btrfs/203 b/tests/btrfs/203 >> index e506118e2cd2..e62f09edb570 100755 >> --- a/tests/btrfs/203 >> +++ b/tests/btrfs/203 >> @@ -20,7 +20,7 @@ _cleanup() >> } >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> >> # real QA test starts here >> @@ -44,7 +44,7 @@ _scratch_mount >> $XFS_IO_PROG -f -c "pwrite -S 0xf1 0 64K" $SCRATCH_MNT/foobar | >> _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/base 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >> 2>&1 \ >> | _filter_scratch >> @@ -70,7 +70,7 @@ $XFS_IO_PROG -c "pwrite -S 0xab 512K 64K" \ >> $SCRATCH_MNT/foobar | _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/incr 2>&1 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >> diff --git a/tests/btrfs/203.out b/tests/btrfs/203.out >> index 58739a98cd1b..59c2564bc61b 100644 >> --- a/tests/btrfs/203.out >> +++ b/tests/btrfs/203.out >> @@ -1,7 +1,7 @@ >> QA output created by 203 >> wrote 65536/65536 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >> At subvol SCRATCH_MNT/base >> wrote 65536/65536 bytes at offset 524288 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> @@ -15,7 +15,7 @@ wrote 65536/65536 bytes at offset 786432 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> linked 196608/196608 bytes at offset 196608 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >> At subvol SCRATCH_MNT/incr >> File foobar digest in the original filesystem: >> 2b76b23b62fdbbbcae1ee37eec84fd7d >> diff --git a/tests/btrfs/226 b/tests/btrfs/226 >> index 7034fcc7b2a5..f96a832505a4 100755 >> --- a/tests/btrfs/226 >> +++ b/tests/btrfs/226 >> @@ -11,7 +11,7 @@ >> _begin_fstest auto quick rw snapshot clone prealloc punch >> >> # Import common functions. >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> >> # real QA test starts here >> @@ -51,7 +51,7 @@ $XFS_IO_PROG -s -c "pwrite -S 0xab 0 64K" \ >> $SCRATCH_MNT/f2 | _filter_xfs_io >> >> $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \ >> - | _filter_scratch >> + | _filter_snapshot >> >> # Write into the range of the first extent so that that range no >> longer has a >> # shared extent. >> diff --git a/tests/btrfs/226.out b/tests/btrfs/226.out >> index c63982b0ba4a..1855e5255fce 100644 >> --- a/tests/btrfs/226.out >> +++ b/tests/btrfs/226.out >> @@ -13,7 +13,7 @@ wrote 65536/65536 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> wrote 65536/65536 bytes at offset 65536 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> wrote 65536/65536 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> pwrite: Resource temporarily unavailable >> diff --git a/tests/btrfs/276 b/tests/btrfs/276 >> index f15f20824350..30799ebe449e 100755 >> --- a/tests/btrfs/276 >> +++ b/tests/btrfs/276 >> @@ -105,7 +105,7 @@ sync >> echo "Number of non-shared extents in the whole file: >> $(count_not_shared_extents)" >> >> # Creating a snapshot. >> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >> _filter_scratch >> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >> _filter_snapshot >> >> # We have a snapshot, so now all extents should be reported as shared. >> echo "Number of shared extents in the whole file: >> $(count_shared_extents)" >> diff --git a/tests/btrfs/276.out b/tests/btrfs/276.out >> index 352e06b4d4b2..27ea29bdf87b 100644 >> --- a/tests/btrfs/276.out >> +++ b/tests/btrfs/276.out >> @@ -1,6 +1,6 @@ >> QA output created by 276 >> Number of non-shared extents in the whole file: 2000 >> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> Number of shared extents in the whole file: 2000 >> wrote 65536/65536 bytes at offset 524288 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> diff --git a/tests/btrfs/280 b/tests/btrfs/280 >> index fc049adb0b19..4957825b7e4b 100755 >> --- a/tests/btrfs/280 >> +++ b/tests/btrfs/280 >> @@ -15,7 +15,7 @@ >> . ./common/preamble >> _begin_fstest auto quick compress snapshot fiemap >> >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/punch # for _filter_fiemap_flags >> >> _supported_fs btrfs >> @@ -37,7 +37,7 @@ _scratch_mount -o compress >> $XFS_IO_PROG -f -c "pwrite -b 1M 0 128M" $SCRATCH_MNT/foo | >> _filter_xfs_io >> >> # Create a RW snapshot of the default subvolume. >> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >> _filter_scratch >> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >> _filter_snapshot >> >> echo >> echo "File foo fiemap before COWing extent:" >> diff --git a/tests/btrfs/280.out b/tests/btrfs/280.out >> index 5371f3b01551..4f0e5d2287b6 100644 >> --- a/tests/btrfs/280.out >> +++ b/tests/btrfs/280.out >> @@ -1,7 +1,7 @@ >> QA output created by 280 >> wrote 134217728/134217728 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> >> File foo fiemap before COWing extent: >> >> diff --git a/tests/btrfs/281 b/tests/btrfs/281 >> index ddc7d9e8b06d..2943998bee20 100755 >> --- a/tests/btrfs/281 >> +++ b/tests/btrfs/281 >> @@ -15,7 +15,7 @@ >> . ./common/preamble >> _begin_fstest auto quick send compress clone fiemap >> >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> . ./common/punch # for _filter_fiemap_flags >> >> @@ -53,7 +53,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 0 64K" >> $SCRATCH_MNT/foo \ >> >> echo "Creating snapshot and a send stream for it..." >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ >> - | _filter_scratch >> + | _filter_snapshot >> $BTRFS_UTIL_PROG send --compressed-data -f $send_stream >> $SCRATCH_MNT/snap 2>&1 \ >> | _filter_scratch >> >> diff --git a/tests/btrfs/281.out b/tests/btrfs/281.out >> index 2585e3e567db..49c23a00baea 100644 >> --- a/tests/btrfs/281.out >> +++ b/tests/btrfs/281.out >> @@ -6,7 +6,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX >> ops/sec) >> linked 65536/65536 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> Creating snapshot and a send stream for it... >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> At subvol SCRATCH_MNT/snap >> Creating a new filesystem to receive the send stream... >> At subvol snap >> diff --git a/tests/btrfs/283 b/tests/btrfs/283 >> index 118df08b8958..d9b8c1d24b8f 100755 >> --- a/tests/btrfs/283 >> +++ b/tests/btrfs/283 >> @@ -11,7 +11,7 @@ >> . ./common/preamble >> _begin_fstest auto quick send clone fiemap >> >> -. ./common/filter >> +. ./common/filter.btrfs >> . ./common/reflink >> . ./common/punch # for _filter_fiemap_flags >> >> @@ -58,7 +58,7 @@ $XFS_IO_PROG -c "pwrite -S 0xcd -b 64K 64K 64K" >> $SCRATCH_MNT/foo | _filter_xfs_i >> >> echo "Creating snapshot and a send stream for it..." >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ >> - | _filter_scratch >> + | _filter_snapshot >> >> $BTRFS_UTIL_PROG send -f $send_stream $SCRATCH_MNT/snap 2>&1 | >> _filter_scratch >> >> diff --git a/tests/btrfs/283.out b/tests/btrfs/283.out >> index 286dae332eff..37f425bf8312 100644 >> --- a/tests/btrfs/283.out >> +++ b/tests/btrfs/283.out >> @@ -4,7 +4,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX >> ops/sec) >> wrote 65536/65536 bytes at offset 65536 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> Creating snapshot and a send stream for it... >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >> At subvol SCRATCH_MNT/snap >> Creating a new filesystem to receive the send stream... >> At subvol snap >> diff --git a/tests/btrfs/287 b/tests/btrfs/287 >> index 64e6ef35250c..dec812760917 100755 >> --- a/tests/btrfs/287 >> +++ b/tests/btrfs/287 >> @@ -112,9 +112,9 @@ query_logical_ino -o $bytenr >> >> # Now create two snapshots and then do some queries. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap1 \ >> - | _filter_scratch >> + | _filter_snapshot >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap2 \ >> - | _filter_scratch >> + | _filter_snapshot >> >> snap1_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap1) >> snap2_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap2) >> diff --git a/tests/btrfs/287.out b/tests/btrfs/287.out >> index 30eac8fa444c..5798ec5d7c55 100644 >> --- a/tests/btrfs/287.out >> +++ b/tests/btrfs/287.out >> @@ -41,8 +41,8 @@ resolve first extent +3M offset with ignore offset >> option: >> inode 257 offset 16777216 root 5 >> inode 257 offset 8388608 root 5 >> inode 257 offset 2097152 root 5 >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> resolve first extent: >> inode 257 offset 16777216 snap2 >> inode 257 offset 8388608 snap2 >> diff --git a/tests/btrfs/293 b/tests/btrfs/293 >> index 06f96dc414b0..fffdcd53441a 100755 >> --- a/tests/btrfs/293 >> +++ b/tests/btrfs/293 >> @@ -32,9 +32,9 @@ swap_file="$SCRATCH_MNT/swapfile" >> _format_swapfile $swap_file $(($(_get_page_size) * 64)) >> $seqres.full >> >> echo "Creating first snapshot..." >> -$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap1 | _filter_scratch >> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >> $SCRATCH_MNT/snap1 | _filter_snapshot >> echo "Creating second snapshot..." >> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | >> _filter_scratch >> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | >> _filter_snapshot >> >> echo "Activating swap file... (should fail due to snapshots)" >> _swapon_file $swap_file 2>&1 | _filter_scratch >> diff --git a/tests/btrfs/293.out b/tests/btrfs/293.out >> index fd04ac9139b8..7b2947a705e7 100644 >> --- a/tests/btrfs/293.out >> +++ b/tests/btrfs/293.out >> @@ -1,8 +1,8 @@ >> QA output created by 293 >> Creating first snapshot... >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> Creating second snapshot... >> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >> Activating swap file... (should fail due to snapshots) >> swapon: SCRATCH_MNT/swapfile: swapon failed: Invalid argument >> Deleting first snapshot... >> diff --git a/tests/btrfs/300 b/tests/btrfs/300 >> index 8a0eaecf87f7..00ffcb82eae6 100755 >> --- a/tests/btrfs/300 >> +++ b/tests/btrfs/300 >> @@ -43,7 +43,7 @@ $BTRFS_UTIL_PROG subvolume create subvol; >> touch subvol/{1,2,3}; >> $BTRFS_UTIL_PROG subvolume create subvol/subsubvol; >> touch subvol/subsubvol/{4,5,6}; >> -$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot; >> +$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot | sed -e >> 's/Create a/Create/g'; >> " >> >> find $test_dir/. -printf "%M %u %g ./%P\n" >> diff --git a/tests/btrfs/300.out b/tests/btrfs/300.out >> index 6e94447e87ac..06a75bff5ce1 100644 >> --- a/tests/btrfs/300.out >> +++ b/tests/btrfs/300.out >> @@ -1,7 +1,7 @@ >> QA output created by 300 >> Create subvolume './subvol' >> Create subvolume 'subvol/subsubvol' >> -Create a snapshot of 'subvol' in './snapshot' >> +Create snapshot of 'subvol' in './snapshot' >> drwxr-xr-x fsgqa fsgqa ./ >> drwxr-xr-x fsgqa fsgqa ./subvol >> -rw-r--r-- fsgqa fsgqa ./subvol/1 >> diff --git a/tests/btrfs/302 b/tests/btrfs/302 >> index f3e6044b5251..52d712ac50de 100755 >> --- a/tests/btrfs/302 >> +++ b/tests/btrfs/302 >> @@ -15,7 +15,7 @@ >> . ./common/preamble >> _begin_fstest auto quick snapshot subvol >> >> -. ./common/filter >> +. ./common/filter.btrfs >> >> _supported_fs btrfs >> _require_scratch >> @@ -46,7 +46,7 @@ $FSSUM_PROG -A -f -w $fssum_file $SCRATCH_MNT/subvol >> # Now create a snapshot of the subvolume and make it accessible from >> within the >> # subvolume. >> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol \ >> - $SCRATCH_MNT/subvol/snap | _filter_scratch >> + $SCRATCH_MNT/subvol/snap | _filter_snapshot >> >> # Now unmount and mount again the fs. We want to verify we are able >> to read all >> # metadata for the snapshot from disk (no IO failures, etc). >> diff --git a/tests/btrfs/302.out b/tests/btrfs/302.out >> index 8770aefc99c8..c08f8c135538 100644 >> --- a/tests/btrfs/302.out >> +++ b/tests/btrfs/302.out >> @@ -1,4 +1,4 @@ >> QA output created by 302 >> Create subvolume 'SCRATCH_MNT/subvol' >> -Create a readonly snapshot of 'SCRATCH_MNT/subvol' in >> 'SCRATCH_MNT/subvol/snap' >> +Create readonly snapshot of 'SCRATCH_MNT/subvol' in >> 'SCRATCH_MNT/subvol/snap' >> OK >> diff --git a/tests/btrfs/314 b/tests/btrfs/314 >> index 887cb69eb79c..598af611d249 100755 >> --- a/tests/btrfs/314 >> +++ b/tests/btrfs/314 >> @@ -43,7 +43,7 @@ send_receive_tempfsid() >> >> $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' ${src}/foo | >> _filter_xfs_io >> $BTRFS_UTIL_PROG subvolume snapshot -r ${src} ${src}/snap1 | \ >> - _filter_testdir_and_scratch >> + _filter_snapshot >> >> echo Send ${src} | _filter_testdir_and_scratch >> $BTRFS_UTIL_PROG send -f ${sendfile} ${src}/snap1 2>&1 | \ >> diff --git a/tests/btrfs/314.out b/tests/btrfs/314.out >> index 21963899c2b2..d29fe51b3ff9 100644 >> --- a/tests/btrfs/314.out >> +++ b/tests/btrfs/314.out >> @@ -3,7 +3,7 @@ QA output created by 314 >> From non-tempfsid SCRATCH_MNT to tempfsid TEST_DIR/314/tempfsid_mnt >> wrote 9000/9000 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >> Send SCRATCH_MNT >> At subvol SCRATCH_MNT/snap1 >> Receive TEST_DIR/314/tempfsid_mnt >> @@ -14,7 +14,7 @@ Recv: 42d69d1a6d333a7ebdf64792a555e392 >> TEST_DIR/314/tempfsid_mnt/snap1/foo >> From tempfsid TEST_DIR/314/tempfsid_mnt to non-tempfsid SCRATCH_MNT >> wrote 9000/9000 bytes at offset 0 >> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> -Create a readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in >> 'TEST_DIR/314/tempfsid_mnt/snap1' >> +Create readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in >> 'TEST_DIR/314/tempfsid_mnt/snap1' >> Send TEST_DIR/314/tempfsid_mnt >> At subvol TEST_DIR/314/tempfsid_mnt/snap1 >> Receive SCRATCH_MNT
在 2024/4/9 10:27, Anand Jain 写道: > > > On 4/8/24 16:24, Qu Wenruo wrote: >> >> >> 在 2024/4/8 14:02, Anand Jain 写道: >>> Btrfs-progs commit 5f87b467a9e7 ("subvolume: output the prompt line only >>> when the ioctl succeeded") changed the output for snapshot command, >>> updating the golden outputs. >>> >>> Create a helper filter to ensure the test cases pass on older >>> btrfs-progs. >>> >>> Another option is to remove the 'btrfs subvolume snapshot' command >>> output >>> from the golden output and redirect it to /dev/null, but this strays >>> from >>> the bug-fix objective. >>> >>> Signed-off-by: Anand Jain <anand.jain@oracle.com> >>> --- >>> v2: The missed testcases included now. >>> Merged following two patches in v1: >>> common/filter.btrfs: add a new _filter_snapshot >>> btrfs: create snapshot fix golden output >> >> Still I do not think this is correct way to go. >> >> 3 points for my objection: >> >> - Most test cases are already doing the redirection for "btrfs >> subvolume" command group >> Check my patch's commit message, overall the touched ones are less >> than 25% of all the "btrfs subvolume snapshot" calls. >> > > I observed that. However, as I mentioned in the change log, the > objective of this patch is to make test cases work with both the > older and newer versions of btrfs-progs only. So, not a good idea > to remove the golden output completely. So you're saying it's a good idea to maintain something that would soon be utilized by new test case? > >> - Missing handling for "btrfs subvolume delete" >> Sure you can add new filters, but I do not think it's worthy just a >> > new filter. > > Sorry, but test cases using 'btrfs subvolume delete' (without > redirection) aren't failing. My bad, my fstest is not uptodate, the latest for-next has another filter you introduced to filter the "subvolume delete" output change. But good luck keeping add new filters just for those trival changes. > >> >> - How to enforce the filters for the future test cases? >> Good luck if you're really pushing everyone to use the new filter. >> On the other hand, it's pretty instintive to just redirect the output. > > Unfortunately, that has been the core fundamental design in fstests, > and I don't intend to change it in a patch meant to fix a bug. > > It seems that we need to maintain the golden output fundamentals until > we find a better alternative or one that is reasonable enough to not > verify the output on a per-command basis, which I believe is your point > of view. I understand that. Also, commented, we could use > '_run_btrfs_util_prog subvolume xxx'. This would mean no golden output. > But as I mentioned, let's not address that objective within this bug > fix. Firstly, the remaining 25% is already the minority. 75% is already doing the redirection instead. I see no point arguing whether it's the fstest policy, as majority of our tests are not following already. Secondly, unlike xfs_io which can sometimes report short read/writes and need to be caught, "btrfs subvolume" output (except "subvolume list") really are informative output, no complexity like "xfs_io". If you really want to blindly following some policy without thinking if it really fits the situation, then good luck. > > Thanks, -Anand > >>> common/filter.btrfs | 9 +++++++++ >>> tests/btrfs/001 | 3 ++- >>> tests/btrfs/001.out | 2 +- >>> tests/btrfs/152 | 6 +++--- >>> tests/btrfs/152.out | 4 ++-- >>> tests/btrfs/168 | 6 +++--- >>> tests/btrfs/168.out | 4 ++-- >>> tests/btrfs/169 | 6 +++--- >>> tests/btrfs/169.out | 4 ++-- >>> tests/btrfs/170 | 4 ++-- >>> tests/btrfs/170.out | 2 +- >>> tests/btrfs/187 | 6 +++--- >>> tests/btrfs/187.out | 4 ++-- >>> tests/btrfs/188 | 8 ++++---- >>> tests/btrfs/188.out | 4 ++-- >>> tests/btrfs/189 | 4 ++-- >>> tests/btrfs/189.out | 2 +- >>> tests/btrfs/191 | 6 +++--- >>> tests/btrfs/191.out | 4 ++-- >>> tests/btrfs/200 | 6 +++--- >>> tests/btrfs/200.out | 4 ++-- >>> tests/btrfs/202 | 4 ++-- >>> tests/btrfs/202.out | 2 +- >>> tests/btrfs/203 | 6 +++--- >>> tests/btrfs/203.out | 4 ++-- >>> tests/btrfs/226 | 4 ++-- >>> tests/btrfs/226.out | 2 +- >>> tests/btrfs/276 | 2 +- >>> tests/btrfs/276.out | 2 +- >>> tests/btrfs/280 | 4 ++-- >>> tests/btrfs/280.out | 2 +- >>> tests/btrfs/281 | 4 ++-- >>> tests/btrfs/281.out | 2 +- >>> tests/btrfs/283 | 4 ++-- >>> tests/btrfs/283.out | 2 +- >>> tests/btrfs/287 | 4 ++-- >>> tests/btrfs/287.out | 4 ++-- >>> tests/btrfs/293 | 4 ++-- >>> tests/btrfs/293.out | 4 ++-- >>> tests/btrfs/300 | 2 +- >>> tests/btrfs/300.out | 2 +- >>> tests/btrfs/302 | 4 ++-- >>> tests/btrfs/302.out | 2 +- >>> tests/btrfs/314 | 2 +- >>> tests/btrfs/314.out | 4 ++-- >>> 45 files changed, 92 insertions(+), 82 deletions(-) >>> >>> diff --git a/common/filter.btrfs b/common/filter.btrfs >>> index 9ef9676175c9..7042edf16d2a 100644 >>> --- a/common/filter.btrfs >>> +++ b/common/filter.btrfs >>> @@ -156,5 +156,14 @@ _filter_device_add() >>> >>> } >>> >>> +_filter_snapshot() >>> +{ >>> + # btrfs-progs commit 5f87b467a9e7 ("btrfs-progs: subvolume: >>> output the >>> + # prompt line only when the ioctl succeeded") changed the output >>> for >>> + # btrfs subvolume snapshot, ensure that the latest fstests >>> continue to >>> + # work on older btrfs-progs without the above commit. >>> + _filter_testdir_and_scratch | sed -e "s/Create a/Create/g" >>> +} >>> + >>> # make sure this script returns success >>> /bin/true >>> diff --git a/tests/btrfs/001 b/tests/btrfs/001 >>> index 6c2639990373..cfcf2ade4590 100755 >>> --- a/tests/btrfs/001 >>> +++ b/tests/btrfs/001 >>> @@ -26,7 +26,8 @@ dd if=/dev/zero of=$SCRATCH_MNT/foo bs=1M count=1 >>> &> /dev/null >>> echo "List root dir" >>> ls $SCRATCH_MNT >>> echo "Creating snapshot of root dir" >>> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >>> _filter_scratch >>> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | \ >>> + _filter_snapshot >>> echo "List root dir after snapshot" >>> ls $SCRATCH_MNT >>> echo "List snapshot dir" >>> diff --git a/tests/btrfs/001.out b/tests/btrfs/001.out >>> index c782bde96091..c9e32265da6a 100644 >>> --- a/tests/btrfs/001.out >>> +++ b/tests/btrfs/001.out >>> @@ -3,7 +3,7 @@ Creating file foo in root dir >>> List root dir >>> foo >>> Creating snapshot of root dir >>> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> List root dir after snapshot >>> foo >>> snap >>> diff --git a/tests/btrfs/152 b/tests/btrfs/152 >>> index 75f576c3cfca..b89fe361e84e 100755 >>> --- a/tests/btrfs/152 >>> +++ b/tests/btrfs/152 >>> @@ -11,7 +11,7 @@ >>> _begin_fstest auto quick metadata qgroup send >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> # real QA test starts here >>> _supported_fs btrfs >>> @@ -32,9 +32,9 @@ touch $SCRATCH_MNT/subvol{1,2}/foo >>> >>> # Create base snapshots and send them >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \ >>> - $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch >>> + $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_snapshot >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \ >>> - $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch >>> + $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_snapshot >>> for recv in recv1_1 recv1_2 recv2_1 recv2_2; do >>> $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> >>> /dev/null | \ >>> $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | >>> _filter_scratch >>> diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out >>> index a95bb5797162..763d38cefe65 100644 >>> --- a/tests/btrfs/152.out >>> +++ b/tests/btrfs/152.out >>> @@ -5,8 +5,8 @@ Create subvolume 'SCRATCH_MNT/recv1_1' >>> Create subvolume 'SCRATCH_MNT/recv1_2' >>> Create subvolume 'SCRATCH_MNT/recv2_1' >>> Create subvolume 'SCRATCH_MNT/recv2_2' >>> -Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in >>> 'SCRATCH_MNT/subvol1/.snapshots/1' >>> -Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in >>> 'SCRATCH_MNT/subvol2/.snapshots/1' >>> +Create readonly snapshot of 'SCRATCH_MNT/subvol1' in >>> 'SCRATCH_MNT/subvol1/.snapshots/1' >>> +Create readonly snapshot of 'SCRATCH_MNT/subvol2' in >>> 'SCRATCH_MNT/subvol2/.snapshots/1' >>> At subvol 1 >>> At subvol 1 >>> At subvol 1 >>> diff --git a/tests/btrfs/168 b/tests/btrfs/168 >>> index acc58b51ee39..78bc9b8f81bb 100755 >>> --- a/tests/btrfs/168 >>> +++ b/tests/btrfs/168 >>> @@ -20,7 +20,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> # real QA test starts here >>> _supported_fs btrfs >>> @@ -74,7 +74,7 @@ $BTRFS_UTIL_PROG property set $SCRATCH_MNT/sv1 ro >>> false >>> # Create a snapshot of the subvolume, to be used later as the >>> parent snapshot >>> # for an incremental send operation. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 >>> $SCRATCH_MNT/snap1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # First do a full send of this snapshot. >>> $FSSUM_PROG -A -f -w $send_files_dir/snap1.fssum $SCRATCH_MNT/snap1 >>> @@ -88,7 +88,7 @@ $XFS_IO_PROG -c "pwrite -S 0x19 4K 8K" >>> $SCRATCH_MNT/sv1/baz >>$seqres.full >>> # Create a second snapshot of the subvolume, to be used later as >>> the send >>> # snapshot of an incremental send operation. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 >>> $SCRATCH_MNT/snap2 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Temporarily turn the second snapshot to read-write mode and then >>> open a file >>> # descriptor on its foo file. >>> diff --git a/tests/btrfs/168.out b/tests/btrfs/168.out >>> index 6cfce8cd666c..0eccbc3fc416 100644 >>> --- a/tests/btrfs/168.out >>> +++ b/tests/btrfs/168.out >>> @@ -1,9 +1,9 @@ >>> QA output created by 168 >>> Create subvolume 'SCRATCH_MNT/sv1' >>> At subvol SCRATCH_MNT/sv1 >>> -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' >>> At subvol SCRATCH_MNT/snap1 >>> -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' >>> +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' >>> At subvol SCRATCH_MNT/snap2 >>> At subvol sv1 >>> OK >>> diff --git a/tests/btrfs/169 b/tests/btrfs/169 >>> index 009fdaee7c46..e507692fd0c6 100755 >>> --- a/tests/btrfs/169 >>> +++ b/tests/btrfs/169 >>> @@ -20,7 +20,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> # real QA test starts here >>> _supported_fs btrfs >>> @@ -44,7 +44,7 @@ $XFS_IO_PROG -f -c "falloc -k 0 4M" \ >>> $SCRATCH_MNT/foobar | _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap1 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 >>> 2>&1 \ >>> | _filter_scratch >>> >>> @@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap >>> $SCRATCH_MNT/snap1 2>&1 \ >>> $XFS_IO_PROG -c "fpunch 1M 2M" $SCRATCH_MNT/foobar >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap2 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/snap1 -f >>> $send_files_dir/2.snap \ >>> $SCRATCH_MNT/snap2 2>&1 | _filter_scratch >>> >>> diff --git a/tests/btrfs/169.out b/tests/btrfs/169.out >>> index ba77bf0adbe3..c3467d5162d9 100644 >>> --- a/tests/btrfs/169.out >>> +++ b/tests/btrfs/169.out >>> @@ -1,9 +1,9 @@ >>> QA output created by 169 >>> wrote 1048576/1048576 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> At subvol SCRATCH_MNT/snap1 >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> At subvol SCRATCH_MNT/snap2 >>> File digest in the original filesystem: >>> d31659e82e87798acd4669a1e0a19d4f SCRATCH_MNT/snap2/foobar >>> diff --git a/tests/btrfs/170 b/tests/btrfs/170 >>> index ab105d36fb96..50b6fa8654d4 100755 >>> --- a/tests/btrfs/170 >>> +++ b/tests/btrfs/170 >>> @@ -12,7 +12,7 @@ >>> _begin_fstest auto quick snapshot prealloc >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> # real QA test starts here >>> _supported_fs btrfs >>> @@ -46,7 +46,7 @@ md5sum $SCRATCH_MNT/foobar | _filter_scratch >>> >>> # Create a snapshot of the subvolume where our file is. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Cleanly unmount the filesystem. >>> _scratch_unmount >>> diff --git a/tests/btrfs/170.out b/tests/btrfs/170.out >>> index 4c5fd87a8b17..ebdf872c7eb2 100644 >>> --- a/tests/btrfs/170.out >>> +++ b/tests/btrfs/170.out >>> @@ -3,6 +3,6 @@ wrote 131072/131072 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> File digest after write: >>> 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> File digest after mounting the filesystem again: >>> 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar >>> diff --git a/tests/btrfs/187 b/tests/btrfs/187 >>> index d3cf05a1bd92..f0935c9e6516 100755 >>> --- a/tests/btrfs/187 >>> +++ b/tests/btrfs/187 >>> @@ -17,7 +17,7 @@ _begin_fstest auto send dedupe clone balance >>> >>> # Import common functions. >>> . ./common/attr >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> >>> # real QA test starts here >>> @@ -152,7 +152,7 @@ done >>> wait ${create_pids[@]} >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Add some more files, so that that are substantial differences >>> between the >>> # two test snapshots used for an incremental send later. >>> @@ -184,7 +184,7 @@ done >>> wait ${setxattr_pids[@]} >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap2 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> full_send_loop 5 & >>> full_send_pid=$! >>> diff --git a/tests/btrfs/187.out b/tests/btrfs/187.out >>> index ab522cfe7e8c..208cfb212b8f 100644 >>> --- a/tests/btrfs/187.out >>> +++ b/tests/btrfs/187.out >>> @@ -1,3 +1,3 @@ >>> QA output created by 187 >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> diff --git a/tests/btrfs/188 b/tests/btrfs/188 >>> index fcaf84b15053..feeb4397c234 100755 >>> --- a/tests/btrfs/188 >>> +++ b/tests/btrfs/188 >>> @@ -21,7 +21,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> # real QA test starts here >>> _supported_fs btrfs >>> @@ -45,16 +45,16 @@ $XFS_IO_PROG -f -c "pwrite -S 0xab 0 500K" >>> $SCRATCH_MNT/foobar | _filter_xfs_io >>> $XFS_IO_PROG -c "falloc -k 1200K 800K" $SCRATCH_MNT/foobar >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/base 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >>> 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Now punch a hole that drops all the extents within the file's size. >>> $XFS_IO_PROG -c "fpunch 0 500K" $SCRATCH_MNT/foobar >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/incr 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >>> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >>> diff --git a/tests/btrfs/188.out b/tests/btrfs/188.out >>> index 260988e60084..586543cfde61 100644 >>> --- a/tests/btrfs/188.out >>> +++ b/tests/btrfs/188.out >>> @@ -1,9 +1,9 @@ >>> QA output created by 188 >>> wrote 512000/512000 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> At subvol SCRATCH_MNT/base >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> At subvol SCRATCH_MNT/incr >>> File digest in the original filesystem: >>> 816df6f64deba63b029ca19d880ee10a SCRATCH_MNT/incr/foobar >>> diff --git a/tests/btrfs/189 b/tests/btrfs/189 >>> index ec6e56fa0020..244ca84299fa 100755 >>> --- a/tests/btrfs/189 >>> +++ b/tests/btrfs/189 >>> @@ -23,7 +23,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> >>> # real QA test starts here >>> @@ -46,7 +46,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0x4d 0 2M" >>> $SCRATCH_MNT/baz | _filter_xfs_io >>> $XFS_IO_PROG -f -c "pwrite -S 0xe2 0 2M" $SCRATCH_MNT/zoo | >>> _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/base 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >>> 2>&1 \ >>> | _filter_scratch >>> diff --git a/tests/btrfs/189.out b/tests/btrfs/189.out >>> index 79c70b03a1ba..a516167578e4 100644 >>> --- a/tests/btrfs/189.out >>> +++ b/tests/btrfs/189.out >>> @@ -7,7 +7,7 @@ wrote 2097152/2097152 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> wrote 2097152/2097152 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> At subvol SCRATCH_MNT/base >>> linked 131072/131072 bytes at offset 655360 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> diff --git a/tests/btrfs/191 b/tests/btrfs/191 >>> index 3c565d0ad209..9c1fd80b7583 100755 >>> --- a/tests/btrfs/191 >>> +++ b/tests/btrfs/191 >>> @@ -19,7 +19,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> >>> # real QA test starts here >>> @@ -44,7 +44,7 @@ $XFS_IO_PROG -c "pwrite -S 0xb8 512K 512K" >>> $SCRATCH_MNT/foo | _filter_xfs_io >>> >>> # Create the base snapshot and the parent send stream from it. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/mysnap1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap >>> $SCRATCH_MNT/mysnap1 2>&1 \ >>> | _filter_scratch >>> @@ -55,7 +55,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xb8 0 1M" >>> $SCRATCH_MNT/bar | _filter_xfs_io >>> # Create the second snapshot, used for the incremental send, before >>> doing the >>> # file deduplication. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/mysnap2 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Now before creating the incremental send stream: >>> # >>> diff --git a/tests/btrfs/191.out b/tests/btrfs/191.out >>> index 4269803cce1e..ad4d779814f7 100644 >>> --- a/tests/btrfs/191.out >>> +++ b/tests/btrfs/191.out >>> @@ -3,11 +3,11 @@ wrote 524288/524288 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> wrote 524288/524288 bytes at offset 524288 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' >>> At subvol SCRATCH_MNT/mysnap1 >>> wrote 1048576/1048576 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' >>> deduped 524288/524288 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> deduped 524288/524288 bytes at offset 524288 >>> diff --git a/tests/btrfs/200 b/tests/btrfs/200 >>> index 5ce3775f2222..3d18165a630f 100755 >>> --- a/tests/btrfs/200 >>> +++ b/tests/btrfs/200 >>> @@ -19,7 +19,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> . ./common/punch >>> >>> @@ -52,7 +52,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" >>> $SCRATCH_MNT/bar \ >>> | _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/base 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >>> 2>&1 \ >>> | _filter_scratch >>> @@ -64,7 +64,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K >>> 64K" $SCRATCH_MNT/bar \ >>> | _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/incr 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >>> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >>> diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out >>> index 3eec567e97fe..5c1cd855fa99 100644 >>> --- a/tests/btrfs/200.out >>> +++ b/tests/btrfs/200.out >>> @@ -5,11 +5,11 @@ linked 65536/65536 bytes at offset 65536 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> wrote 65536/65536 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> At subvol SCRATCH_MNT/base >>> linked 65536/65536 bytes at offset 65536 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> At subvol SCRATCH_MNT/incr >>> At subvol base >>> At snapshot incr >>> diff --git a/tests/btrfs/202 b/tests/btrfs/202 >>> index 5f0429f18bf9..57ecbe47c0bb 100755 >>> --- a/tests/btrfs/202 >>> +++ b/tests/btrfs/202 >>> @@ -8,7 +8,7 @@ >>> . ./common/preamble >>> _begin_fstest auto quick subvol snapshot >>> >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> _supported_fs btrfs >>> _require_scratch >>> @@ -28,7 +28,7 @@ _scratch_mount >>> $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a | _filter_scratch >>> $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a/b | _filter_scratch >>> $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT/a $SCRATCH_MNT/c \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Need the dummy entry created so that we get the invalid removal >>> when we rmdir >>> ls $SCRATCH_MNT/c/b >>> diff --git a/tests/btrfs/202.out b/tests/btrfs/202.out >>> index 7f33d49f889c..6b80810e96ed 100644 >>> --- a/tests/btrfs/202.out >>> +++ b/tests/btrfs/202.out >>> @@ -1,4 +1,4 @@ >>> QA output created by 202 >>> Create subvolume 'SCRATCH_MNT/a' >>> Create subvolume 'SCRATCH_MNT/a/b' >>> -Create a snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' >>> +Create snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' >>> diff --git a/tests/btrfs/203 b/tests/btrfs/203 >>> index e506118e2cd2..e62f09edb570 100755 >>> --- a/tests/btrfs/203 >>> +++ b/tests/btrfs/203 >>> @@ -20,7 +20,7 @@ _cleanup() >>> } >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> >>> # real QA test starts here >>> @@ -44,7 +44,7 @@ _scratch_mount >>> $XFS_IO_PROG -f -c "pwrite -S 0xf1 0 64K" $SCRATCH_MNT/foobar | >>> _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/base 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base >>> 2>&1 \ >>> | _filter_scratch >>> @@ -70,7 +70,7 @@ $XFS_IO_PROG -c "pwrite -S 0xab 512K 64K" \ >>> $SCRATCH_MNT/foobar | _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/incr 2>&1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ >>> $SCRATCH_MNT/incr 2>&1 | _filter_scratch >>> diff --git a/tests/btrfs/203.out b/tests/btrfs/203.out >>> index 58739a98cd1b..59c2564bc61b 100644 >>> --- a/tests/btrfs/203.out >>> +++ b/tests/btrfs/203.out >>> @@ -1,7 +1,7 @@ >>> QA output created by 203 >>> wrote 65536/65536 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' >>> At subvol SCRATCH_MNT/base >>> wrote 65536/65536 bytes at offset 524288 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> @@ -15,7 +15,7 @@ wrote 65536/65536 bytes at offset 786432 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> linked 196608/196608 bytes at offset 196608 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' >>> At subvol SCRATCH_MNT/incr >>> File foobar digest in the original filesystem: >>> 2b76b23b62fdbbbcae1ee37eec84fd7d >>> diff --git a/tests/btrfs/226 b/tests/btrfs/226 >>> index 7034fcc7b2a5..f96a832505a4 100755 >>> --- a/tests/btrfs/226 >>> +++ b/tests/btrfs/226 >>> @@ -11,7 +11,7 @@ >>> _begin_fstest auto quick rw snapshot clone prealloc punch >>> >>> # Import common functions. >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> >>> # real QA test starts here >>> @@ -51,7 +51,7 @@ $XFS_IO_PROG -s -c "pwrite -S 0xab 0 64K" \ >>> $SCRATCH_MNT/f2 | _filter_xfs_io >>> >>> $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> # Write into the range of the first extent so that that range no >>> longer has a >>> # shared extent. >>> diff --git a/tests/btrfs/226.out b/tests/btrfs/226.out >>> index c63982b0ba4a..1855e5255fce 100644 >>> --- a/tests/btrfs/226.out >>> +++ b/tests/btrfs/226.out >>> @@ -13,7 +13,7 @@ wrote 65536/65536 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> wrote 65536/65536 bytes at offset 65536 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> wrote 65536/65536 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> pwrite: Resource temporarily unavailable >>> diff --git a/tests/btrfs/276 b/tests/btrfs/276 >>> index f15f20824350..30799ebe449e 100755 >>> --- a/tests/btrfs/276 >>> +++ b/tests/btrfs/276 >>> @@ -105,7 +105,7 @@ sync >>> echo "Number of non-shared extents in the whole file: >>> $(count_not_shared_extents)" >>> >>> # Creating a snapshot. >>> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >>> _filter_scratch >>> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >>> _filter_snapshot >>> >>> # We have a snapshot, so now all extents should be reported as shared. >>> echo "Number of shared extents in the whole file: >>> $(count_shared_extents)" >>> diff --git a/tests/btrfs/276.out b/tests/btrfs/276.out >>> index 352e06b4d4b2..27ea29bdf87b 100644 >>> --- a/tests/btrfs/276.out >>> +++ b/tests/btrfs/276.out >>> @@ -1,6 +1,6 @@ >>> QA output created by 276 >>> Number of non-shared extents in the whole file: 2000 >>> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> Number of shared extents in the whole file: 2000 >>> wrote 65536/65536 bytes at offset 524288 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> diff --git a/tests/btrfs/280 b/tests/btrfs/280 >>> index fc049adb0b19..4957825b7e4b 100755 >>> --- a/tests/btrfs/280 >>> +++ b/tests/btrfs/280 >>> @@ -15,7 +15,7 @@ >>> . ./common/preamble >>> _begin_fstest auto quick compress snapshot fiemap >>> >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/punch # for _filter_fiemap_flags >>> >>> _supported_fs btrfs >>> @@ -37,7 +37,7 @@ _scratch_mount -o compress >>> $XFS_IO_PROG -f -c "pwrite -b 1M 0 128M" $SCRATCH_MNT/foo | >>> _filter_xfs_io >>> >>> # Create a RW snapshot of the default subvolume. >>> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >>> _filter_scratch >>> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | >>> _filter_snapshot >>> >>> echo >>> echo "File foo fiemap before COWing extent:" >>> diff --git a/tests/btrfs/280.out b/tests/btrfs/280.out >>> index 5371f3b01551..4f0e5d2287b6 100644 >>> --- a/tests/btrfs/280.out >>> +++ b/tests/btrfs/280.out >>> @@ -1,7 +1,7 @@ >>> QA output created by 280 >>> wrote 134217728/134217728 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> >>> File foo fiemap before COWing extent: >>> >>> diff --git a/tests/btrfs/281 b/tests/btrfs/281 >>> index ddc7d9e8b06d..2943998bee20 100755 >>> --- a/tests/btrfs/281 >>> +++ b/tests/btrfs/281 >>> @@ -15,7 +15,7 @@ >>> . ./common/preamble >>> _begin_fstest auto quick send compress clone fiemap >>> >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> . ./common/punch # for _filter_fiemap_flags >>> >>> @@ -53,7 +53,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 0 64K" >>> $SCRATCH_MNT/foo \ >>> >>> echo "Creating snapshot and a send stream for it..." >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> $BTRFS_UTIL_PROG send --compressed-data -f $send_stream >>> $SCRATCH_MNT/snap 2>&1 \ >>> | _filter_scratch >>> >>> diff --git a/tests/btrfs/281.out b/tests/btrfs/281.out >>> index 2585e3e567db..49c23a00baea 100644 >>> --- a/tests/btrfs/281.out >>> +++ b/tests/btrfs/281.out >>> @@ -6,7 +6,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX >>> ops/sec) >>> linked 65536/65536 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> Creating snapshot and a send stream for it... >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> At subvol SCRATCH_MNT/snap >>> Creating a new filesystem to receive the send stream... >>> At subvol snap >>> diff --git a/tests/btrfs/283 b/tests/btrfs/283 >>> index 118df08b8958..d9b8c1d24b8f 100755 >>> --- a/tests/btrfs/283 >>> +++ b/tests/btrfs/283 >>> @@ -11,7 +11,7 @@ >>> . ./common/preamble >>> _begin_fstest auto quick send clone fiemap >>> >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> . ./common/reflink >>> . ./common/punch # for _filter_fiemap_flags >>> >>> @@ -58,7 +58,7 @@ $XFS_IO_PROG -c "pwrite -S 0xcd -b 64K 64K 64K" >>> $SCRATCH_MNT/foo | _filter_xfs_i >>> >>> echo "Creating snapshot and a send stream for it..." >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> $BTRFS_UTIL_PROG send -f $send_stream $SCRATCH_MNT/snap 2>&1 | >>> _filter_scratch >>> >>> diff --git a/tests/btrfs/283.out b/tests/btrfs/283.out >>> index 286dae332eff..37f425bf8312 100644 >>> --- a/tests/btrfs/283.out >>> +++ b/tests/btrfs/283.out >>> @@ -4,7 +4,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX >>> ops/sec) >>> wrote 65536/65536 bytes at offset 65536 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> Creating snapshot and a send stream for it... >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' >>> At subvol SCRATCH_MNT/snap >>> Creating a new filesystem to receive the send stream... >>> At subvol snap >>> diff --git a/tests/btrfs/287 b/tests/btrfs/287 >>> index 64e6ef35250c..dec812760917 100755 >>> --- a/tests/btrfs/287 >>> +++ b/tests/btrfs/287 >>> @@ -112,9 +112,9 @@ query_logical_ino -o $bytenr >>> >>> # Now create two snapshots and then do some queries. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap1 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap2 \ >>> - | _filter_scratch >>> + | _filter_snapshot >>> >>> snap1_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap1) >>> snap2_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap2) >>> diff --git a/tests/btrfs/287.out b/tests/btrfs/287.out >>> index 30eac8fa444c..5798ec5d7c55 100644 >>> --- a/tests/btrfs/287.out >>> +++ b/tests/btrfs/287.out >>> @@ -41,8 +41,8 @@ resolve first extent +3M offset with ignore offset >>> option: >>> inode 257 offset 16777216 root 5 >>> inode 257 offset 8388608 root 5 >>> inode 257 offset 2097152 root 5 >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> resolve first extent: >>> inode 257 offset 16777216 snap2 >>> inode 257 offset 8388608 snap2 >>> diff --git a/tests/btrfs/293 b/tests/btrfs/293 >>> index 06f96dc414b0..fffdcd53441a 100755 >>> --- a/tests/btrfs/293 >>> +++ b/tests/btrfs/293 >>> @@ -32,9 +32,9 @@ swap_file="$SCRATCH_MNT/swapfile" >>> _format_swapfile $swap_file $(($(_get_page_size) * 64)) >> >>> $seqres.full >>> >>> echo "Creating first snapshot..." >>> -$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap1 | _filter_scratch >>> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT >>> $SCRATCH_MNT/snap1 | _filter_snapshot >>> echo "Creating second snapshot..." >>> -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 >>> | _filter_scratch >>> +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 >>> | _filter_snapshot >>> >>> echo "Activating swap file... (should fail due to snapshots)" >>> _swapon_file $swap_file 2>&1 | _filter_scratch >>> diff --git a/tests/btrfs/293.out b/tests/btrfs/293.out >>> index fd04ac9139b8..7b2947a705e7 100644 >>> --- a/tests/btrfs/293.out >>> +++ b/tests/btrfs/293.out >>> @@ -1,8 +1,8 @@ >>> QA output created by 293 >>> Creating first snapshot... >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> Creating second snapshot... >>> -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' >>> Activating swap file... (should fail due to snapshots) >>> swapon: SCRATCH_MNT/swapfile: swapon failed: Invalid argument >>> Deleting first snapshot... >>> diff --git a/tests/btrfs/300 b/tests/btrfs/300 >>> index 8a0eaecf87f7..00ffcb82eae6 100755 >>> --- a/tests/btrfs/300 >>> +++ b/tests/btrfs/300 >>> @@ -43,7 +43,7 @@ $BTRFS_UTIL_PROG subvolume create subvol; >>> touch subvol/{1,2,3}; >>> $BTRFS_UTIL_PROG subvolume create subvol/subsubvol; >>> touch subvol/subsubvol/{4,5,6}; >>> -$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot; >>> +$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot | sed -e >>> 's/Create a/Create/g'; >>> " >>> >>> find $test_dir/. -printf "%M %u %g ./%P\n" >>> diff --git a/tests/btrfs/300.out b/tests/btrfs/300.out >>> index 6e94447e87ac..06a75bff5ce1 100644 >>> --- a/tests/btrfs/300.out >>> +++ b/tests/btrfs/300.out >>> @@ -1,7 +1,7 @@ >>> QA output created by 300 >>> Create subvolume './subvol' >>> Create subvolume 'subvol/subsubvol' >>> -Create a snapshot of 'subvol' in './snapshot' >>> +Create snapshot of 'subvol' in './snapshot' >>> drwxr-xr-x fsgqa fsgqa ./ >>> drwxr-xr-x fsgqa fsgqa ./subvol >>> -rw-r--r-- fsgqa fsgqa ./subvol/1 >>> diff --git a/tests/btrfs/302 b/tests/btrfs/302 >>> index f3e6044b5251..52d712ac50de 100755 >>> --- a/tests/btrfs/302 >>> +++ b/tests/btrfs/302 >>> @@ -15,7 +15,7 @@ >>> . ./common/preamble >>> _begin_fstest auto quick snapshot subvol >>> >>> -. ./common/filter >>> +. ./common/filter.btrfs >>> >>> _supported_fs btrfs >>> _require_scratch >>> @@ -46,7 +46,7 @@ $FSSUM_PROG -A -f -w $fssum_file $SCRATCH_MNT/subvol >>> # Now create a snapshot of the subvolume and make it accessible >>> from within the >>> # subvolume. >>> $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol \ >>> - $SCRATCH_MNT/subvol/snap | _filter_scratch >>> + $SCRATCH_MNT/subvol/snap | _filter_snapshot >>> >>> # Now unmount and mount again the fs. We want to verify we are able >>> to read all >>> # metadata for the snapshot from disk (no IO failures, etc). >>> diff --git a/tests/btrfs/302.out b/tests/btrfs/302.out >>> index 8770aefc99c8..c08f8c135538 100644 >>> --- a/tests/btrfs/302.out >>> +++ b/tests/btrfs/302.out >>> @@ -1,4 +1,4 @@ >>> QA output created by 302 >>> Create subvolume 'SCRATCH_MNT/subvol' >>> -Create a readonly snapshot of 'SCRATCH_MNT/subvol' in >>> 'SCRATCH_MNT/subvol/snap' >>> +Create readonly snapshot of 'SCRATCH_MNT/subvol' in >>> 'SCRATCH_MNT/subvol/snap' >>> OK >>> diff --git a/tests/btrfs/314 b/tests/btrfs/314 >>> index 887cb69eb79c..598af611d249 100755 >>> --- a/tests/btrfs/314 >>> +++ b/tests/btrfs/314 >>> @@ -43,7 +43,7 @@ send_receive_tempfsid() >>> >>> $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' ${src}/foo | >>> _filter_xfs_io >>> $BTRFS_UTIL_PROG subvolume snapshot -r ${src} ${src}/snap1 | \ >>> - _filter_testdir_and_scratch >>> + _filter_snapshot >>> >>> echo Send ${src} | _filter_testdir_and_scratch >>> $BTRFS_UTIL_PROG send -f ${sendfile} ${src}/snap1 2>&1 | \ >>> diff --git a/tests/btrfs/314.out b/tests/btrfs/314.out >>> index 21963899c2b2..d29fe51b3ff9 100644 >>> --- a/tests/btrfs/314.out >>> +++ b/tests/btrfs/314.out >>> @@ -3,7 +3,7 @@ QA output created by 314 >>> From non-tempfsid SCRATCH_MNT to tempfsid TEST_DIR/314/tempfsid_mnt >>> wrote 9000/9000 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' >>> Send SCRATCH_MNT >>> At subvol SCRATCH_MNT/snap1 >>> Receive TEST_DIR/314/tempfsid_mnt >>> @@ -14,7 +14,7 @@ Recv: 42d69d1a6d333a7ebdf64792a555e392 >>> TEST_DIR/314/tempfsid_mnt/snap1/foo >>> From tempfsid TEST_DIR/314/tempfsid_mnt to non-tempfsid SCRATCH_MNT >>> wrote 9000/9000 bytes at offset 0 >>> XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >>> -Create a readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in >>> 'TEST_DIR/314/tempfsid_mnt/snap1' >>> +Create readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in >>> 'TEST_DIR/314/tempfsid_mnt/snap1' >>> Send TEST_DIR/314/tempfsid_mnt >>> At subvol TEST_DIR/314/tempfsid_mnt/snap1 >>> Receive SCRATCH_MNT
diff --git a/common/filter.btrfs b/common/filter.btrfs index 9ef9676175c9..7042edf16d2a 100644 --- a/common/filter.btrfs +++ b/common/filter.btrfs @@ -156,5 +156,14 @@ _filter_device_add() } +_filter_snapshot() +{ + # btrfs-progs commit 5f87b467a9e7 ("btrfs-progs: subvolume: output the + # prompt line only when the ioctl succeeded") changed the output for + # btrfs subvolume snapshot, ensure that the latest fstests continue to + # work on older btrfs-progs without the above commit. + _filter_testdir_and_scratch | sed -e "s/Create a/Create/g" +} + # make sure this script returns success /bin/true diff --git a/tests/btrfs/001 b/tests/btrfs/001 index 6c2639990373..cfcf2ade4590 100755 --- a/tests/btrfs/001 +++ b/tests/btrfs/001 @@ -26,7 +26,8 @@ dd if=/dev/zero of=$SCRATCH_MNT/foo bs=1M count=1 &> /dev/null echo "List root dir" ls $SCRATCH_MNT echo "Creating snapshot of root dir" -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | \ + _filter_snapshot echo "List root dir after snapshot" ls $SCRATCH_MNT echo "List snapshot dir" diff --git a/tests/btrfs/001.out b/tests/btrfs/001.out index c782bde96091..c9e32265da6a 100644 --- a/tests/btrfs/001.out +++ b/tests/btrfs/001.out @@ -3,7 +3,7 @@ Creating file foo in root dir List root dir foo Creating snapshot of root dir -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' List root dir after snapshot foo snap diff --git a/tests/btrfs/152 b/tests/btrfs/152 index 75f576c3cfca..b89fe361e84e 100755 --- a/tests/btrfs/152 +++ b/tests/btrfs/152 @@ -11,7 +11,7 @@ _begin_fstest auto quick metadata qgroup send # Import common functions. -. ./common/filter +. ./common/filter.btrfs # real QA test starts here _supported_fs btrfs @@ -32,9 +32,9 @@ touch $SCRATCH_MNT/subvol{1,2}/foo # Create base snapshots and send them $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \ - $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch + $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_snapshot $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \ - $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch + $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_snapshot for recv in recv1_1 recv1_2 recv2_1 recv2_2; do $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> /dev/null | \ $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out index a95bb5797162..763d38cefe65 100644 --- a/tests/btrfs/152.out +++ b/tests/btrfs/152.out @@ -5,8 +5,8 @@ Create subvolume 'SCRATCH_MNT/recv1_1' Create subvolume 'SCRATCH_MNT/recv1_2' Create subvolume 'SCRATCH_MNT/recv2_1' Create subvolume 'SCRATCH_MNT/recv2_2' -Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1' -Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1' +Create readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1' +Create readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1' At subvol 1 At subvol 1 At subvol 1 diff --git a/tests/btrfs/168 b/tests/btrfs/168 index acc58b51ee39..78bc9b8f81bb 100755 --- a/tests/btrfs/168 +++ b/tests/btrfs/168 @@ -20,7 +20,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs # real QA test starts here _supported_fs btrfs @@ -74,7 +74,7 @@ $BTRFS_UTIL_PROG property set $SCRATCH_MNT/sv1 ro false # Create a snapshot of the subvolume, to be used later as the parent snapshot # for an incremental send operation. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 $SCRATCH_MNT/snap1 \ - | _filter_scratch + | _filter_snapshot # First do a full send of this snapshot. $FSSUM_PROG -A -f -w $send_files_dir/snap1.fssum $SCRATCH_MNT/snap1 @@ -88,7 +88,7 @@ $XFS_IO_PROG -c "pwrite -S 0x19 4K 8K" $SCRATCH_MNT/sv1/baz >>$seqres.full # Create a second snapshot of the subvolume, to be used later as the send # snapshot of an incremental send operation. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1 $SCRATCH_MNT/snap2 \ - | _filter_scratch + | _filter_snapshot # Temporarily turn the second snapshot to read-write mode and then open a file # descriptor on its foo file. diff --git a/tests/btrfs/168.out b/tests/btrfs/168.out index 6cfce8cd666c..0eccbc3fc416 100644 --- a/tests/btrfs/168.out +++ b/tests/btrfs/168.out @@ -1,9 +1,9 @@ QA output created by 168 Create subvolume 'SCRATCH_MNT/sv1' At subvol SCRATCH_MNT/sv1 -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1' At subvol SCRATCH_MNT/snap1 -Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' +Create readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2' At subvol SCRATCH_MNT/snap2 At subvol sv1 OK diff --git a/tests/btrfs/169 b/tests/btrfs/169 index 009fdaee7c46..e507692fd0c6 100755 --- a/tests/btrfs/169 +++ b/tests/btrfs/169 @@ -20,7 +20,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs # real QA test starts here _supported_fs btrfs @@ -44,7 +44,7 @@ $XFS_IO_PROG -f -c "falloc -k 0 4M" \ $SCRATCH_MNT/foobar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 2>&1 \ | _filter_scratch @@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1 2>&1 \ $XFS_IO_PROG -c "fpunch 1M 2M" $SCRATCH_MNT/foobar $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/snap1 -f $send_files_dir/2.snap \ $SCRATCH_MNT/snap2 2>&1 | _filter_scratch diff --git a/tests/btrfs/169.out b/tests/btrfs/169.out index ba77bf0adbe3..c3467d5162d9 100644 --- a/tests/btrfs/169.out +++ b/tests/btrfs/169.out @@ -1,9 +1,9 @@ QA output created by 169 wrote 1048576/1048576 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' At subvol SCRATCH_MNT/snap1 -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' At subvol SCRATCH_MNT/snap2 File digest in the original filesystem: d31659e82e87798acd4669a1e0a19d4f SCRATCH_MNT/snap2/foobar diff --git a/tests/btrfs/170 b/tests/btrfs/170 index ab105d36fb96..50b6fa8654d4 100755 --- a/tests/btrfs/170 +++ b/tests/btrfs/170 @@ -12,7 +12,7 @@ _begin_fstest auto quick snapshot prealloc # Import common functions. -. ./common/filter +. ./common/filter.btrfs # real QA test starts here _supported_fs btrfs @@ -46,7 +46,7 @@ md5sum $SCRATCH_MNT/foobar | _filter_scratch # Create a snapshot of the subvolume where our file is. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap 2>&1 \ - | _filter_scratch + | _filter_snapshot # Cleanly unmount the filesystem. _scratch_unmount diff --git a/tests/btrfs/170.out b/tests/btrfs/170.out index 4c5fd87a8b17..ebdf872c7eb2 100644 --- a/tests/btrfs/170.out +++ b/tests/btrfs/170.out @@ -3,6 +3,6 @@ wrote 131072/131072 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File digest after write: 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' File digest after mounting the filesystem again: 85054e9e74bc3ae186d693890106b71f SCRATCH_MNT/foobar diff --git a/tests/btrfs/187 b/tests/btrfs/187 index d3cf05a1bd92..f0935c9e6516 100755 --- a/tests/btrfs/187 +++ b/tests/btrfs/187 @@ -17,7 +17,7 @@ _begin_fstest auto send dedupe clone balance # Import common functions. . ./common/attr -. ./common/filter +. ./common/filter.btrfs . ./common/reflink # real QA test starts here @@ -152,7 +152,7 @@ done wait ${create_pids[@]} $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \ - | _filter_scratch + | _filter_snapshot # Add some more files, so that that are substantial differences between the # two test snapshots used for an incremental send later. @@ -184,7 +184,7 @@ done wait ${setxattr_pids[@]} $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 \ - | _filter_scratch + | _filter_snapshot full_send_loop 5 & full_send_pid=$! diff --git a/tests/btrfs/187.out b/tests/btrfs/187.out index ab522cfe7e8c..208cfb212b8f 100644 --- a/tests/btrfs/187.out +++ b/tests/btrfs/187.out @@ -1,3 +1,3 @@ QA output created by 187 -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' diff --git a/tests/btrfs/188 b/tests/btrfs/188 index fcaf84b15053..feeb4397c234 100755 --- a/tests/btrfs/188 +++ b/tests/btrfs/188 @@ -21,7 +21,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs # real QA test starts here _supported_fs btrfs @@ -45,16 +45,16 @@ $XFS_IO_PROG -f -c "pwrite -S 0xab 0 500K" $SCRATCH_MNT/foobar | _filter_xfs_io $XFS_IO_PROG -c "falloc -k 1200K 800K" $SCRATCH_MNT/foobar $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ - | _filter_scratch + | _filter_snapshot # Now punch a hole that drops all the extents within the file's size. $XFS_IO_PROG -c "fpunch 0 500K" $SCRATCH_MNT/foobar $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ $SCRATCH_MNT/incr 2>&1 | _filter_scratch diff --git a/tests/btrfs/188.out b/tests/btrfs/188.out index 260988e60084..586543cfde61 100644 --- a/tests/btrfs/188.out +++ b/tests/btrfs/188.out @@ -1,9 +1,9 @@ QA output created by 188 wrote 512000/512000 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' At subvol SCRATCH_MNT/base -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' At subvol SCRATCH_MNT/incr File digest in the original filesystem: 816df6f64deba63b029ca19d880ee10a SCRATCH_MNT/incr/foobar diff --git a/tests/btrfs/189 b/tests/btrfs/189 index ec6e56fa0020..244ca84299fa 100755 --- a/tests/btrfs/189 +++ b/tests/btrfs/189 @@ -23,7 +23,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs . ./common/reflink # real QA test starts here @@ -46,7 +46,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0x4d 0 2M" $SCRATCH_MNT/baz | _filter_xfs_io $XFS_IO_PROG -f -c "pwrite -S 0xe2 0 2M" $SCRATCH_MNT/zoo | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ | _filter_scratch diff --git a/tests/btrfs/189.out b/tests/btrfs/189.out index 79c70b03a1ba..a516167578e4 100644 --- a/tests/btrfs/189.out +++ b/tests/btrfs/189.out @@ -7,7 +7,7 @@ wrote 2097152/2097152 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 2097152/2097152 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' At subvol SCRATCH_MNT/base linked 131072/131072 bytes at offset 655360 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) diff --git a/tests/btrfs/191 b/tests/btrfs/191 index 3c565d0ad209..9c1fd80b7583 100755 --- a/tests/btrfs/191 +++ b/tests/btrfs/191 @@ -19,7 +19,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs . ./common/reflink # real QA test starts here @@ -44,7 +44,7 @@ $XFS_IO_PROG -c "pwrite -S 0xb8 512K 512K" $SCRATCH_MNT/foo | _filter_xfs_io # Create the base snapshot and the parent send stream from it. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/mysnap1 2>&1 \ | _filter_scratch @@ -55,7 +55,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xb8 0 1M" $SCRATCH_MNT/bar | _filter_xfs_io # Create the second snapshot, used for the incremental send, before doing the # file deduplication. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2 \ - | _filter_scratch + | _filter_snapshot # Now before creating the incremental send stream: # diff --git a/tests/btrfs/191.out b/tests/btrfs/191.out index 4269803cce1e..ad4d779814f7 100644 --- a/tests/btrfs/191.out +++ b/tests/btrfs/191.out @@ -3,11 +3,11 @@ wrote 524288/524288 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 524288/524288 bytes at offset 524288 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' At subvol SCRATCH_MNT/mysnap1 wrote 1048576/1048576 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' deduped 524288/524288 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) deduped 524288/524288 bytes at offset 524288 diff --git a/tests/btrfs/200 b/tests/btrfs/200 index 5ce3775f2222..3d18165a630f 100755 --- a/tests/btrfs/200 +++ b/tests/btrfs/200 @@ -19,7 +19,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs . ./common/reflink . ./common/punch @@ -52,7 +52,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \ | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ | _filter_scratch @@ -64,7 +64,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \ | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ $SCRATCH_MNT/incr 2>&1 | _filter_scratch diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out index 3eec567e97fe..5c1cd855fa99 100644 --- a/tests/btrfs/200.out +++ b/tests/btrfs/200.out @@ -5,11 +5,11 @@ linked 65536/65536 bytes at offset 65536 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' At subvol SCRATCH_MNT/base linked 65536/65536 bytes at offset 65536 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' At subvol SCRATCH_MNT/incr At subvol base At snapshot incr diff --git a/tests/btrfs/202 b/tests/btrfs/202 index 5f0429f18bf9..57ecbe47c0bb 100755 --- a/tests/btrfs/202 +++ b/tests/btrfs/202 @@ -8,7 +8,7 @@ . ./common/preamble _begin_fstest auto quick subvol snapshot -. ./common/filter +. ./common/filter.btrfs _supported_fs btrfs _require_scratch @@ -28,7 +28,7 @@ _scratch_mount $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a | _filter_scratch $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a/b | _filter_scratch $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT/a $SCRATCH_MNT/c \ - | _filter_scratch + | _filter_snapshot # Need the dummy entry created so that we get the invalid removal when we rmdir ls $SCRATCH_MNT/c/b diff --git a/tests/btrfs/202.out b/tests/btrfs/202.out index 7f33d49f889c..6b80810e96ed 100644 --- a/tests/btrfs/202.out +++ b/tests/btrfs/202.out @@ -1,4 +1,4 @@ QA output created by 202 Create subvolume 'SCRATCH_MNT/a' Create subvolume 'SCRATCH_MNT/a/b' -Create a snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' +Create snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c' diff --git a/tests/btrfs/203 b/tests/btrfs/203 index e506118e2cd2..e62f09edb570 100755 --- a/tests/btrfs/203 +++ b/tests/btrfs/203 @@ -20,7 +20,7 @@ _cleanup() } # Import common functions. -. ./common/filter +. ./common/filter.btrfs . ./common/reflink # real QA test starts here @@ -44,7 +44,7 @@ _scratch_mount $XFS_IO_PROG -f -c "pwrite -S 0xf1 0 64K" $SCRATCH_MNT/foobar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base 2>&1 \ | _filter_scratch @@ -70,7 +70,7 @@ $XFS_IO_PROG -c "pwrite -S 0xab 512K 64K" \ $SCRATCH_MNT/foobar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr 2>&1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \ $SCRATCH_MNT/incr 2>&1 | _filter_scratch diff --git a/tests/btrfs/203.out b/tests/btrfs/203.out index 58739a98cd1b..59c2564bc61b 100644 --- a/tests/btrfs/203.out +++ b/tests/btrfs/203.out @@ -1,7 +1,7 @@ QA output created by 203 wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base' At subvol SCRATCH_MNT/base wrote 65536/65536 bytes at offset 524288 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -15,7 +15,7 @@ wrote 65536/65536 bytes at offset 786432 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) linked 196608/196608 bytes at offset 196608 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr' At subvol SCRATCH_MNT/incr File foobar digest in the original filesystem: 2b76b23b62fdbbbcae1ee37eec84fd7d diff --git a/tests/btrfs/226 b/tests/btrfs/226 index 7034fcc7b2a5..f96a832505a4 100755 --- a/tests/btrfs/226 +++ b/tests/btrfs/226 @@ -11,7 +11,7 @@ _begin_fstest auto quick rw snapshot clone prealloc punch # Import common functions. -. ./common/filter +. ./common/filter.btrfs . ./common/reflink # real QA test starts here @@ -51,7 +51,7 @@ $XFS_IO_PROG -s -c "pwrite -S 0xab 0 64K" \ $SCRATCH_MNT/f2 | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \ - | _filter_scratch + | _filter_snapshot # Write into the range of the first extent so that that range no longer has a # shared extent. diff --git a/tests/btrfs/226.out b/tests/btrfs/226.out index c63982b0ba4a..1855e5255fce 100644 --- a/tests/btrfs/226.out +++ b/tests/btrfs/226.out @@ -13,7 +13,7 @@ wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 65536 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) pwrite: Resource temporarily unavailable diff --git a/tests/btrfs/276 b/tests/btrfs/276 index f15f20824350..30799ebe449e 100755 --- a/tests/btrfs/276 +++ b/tests/btrfs/276 @@ -105,7 +105,7 @@ sync echo "Number of non-shared extents in the whole file: $(count_not_shared_extents)" # Creating a snapshot. -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_snapshot # We have a snapshot, so now all extents should be reported as shared. echo "Number of shared extents in the whole file: $(count_shared_extents)" diff --git a/tests/btrfs/276.out b/tests/btrfs/276.out index 352e06b4d4b2..27ea29bdf87b 100644 --- a/tests/btrfs/276.out +++ b/tests/btrfs/276.out @@ -1,6 +1,6 @@ QA output created by 276 Number of non-shared extents in the whole file: 2000 -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' Number of shared extents in the whole file: 2000 wrote 65536/65536 bytes at offset 524288 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) diff --git a/tests/btrfs/280 b/tests/btrfs/280 index fc049adb0b19..4957825b7e4b 100755 --- a/tests/btrfs/280 +++ b/tests/btrfs/280 @@ -15,7 +15,7 @@ . ./common/preamble _begin_fstest auto quick compress snapshot fiemap -. ./common/filter +. ./common/filter.btrfs . ./common/punch # for _filter_fiemap_flags _supported_fs btrfs @@ -37,7 +37,7 @@ _scratch_mount -o compress $XFS_IO_PROG -f -c "pwrite -b 1M 0 128M" $SCRATCH_MNT/foo | _filter_xfs_io # Create a RW snapshot of the default subvolume. -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_scratch +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap | _filter_snapshot echo echo "File foo fiemap before COWing extent:" diff --git a/tests/btrfs/280.out b/tests/btrfs/280.out index 5371f3b01551..4f0e5d2287b6 100644 --- a/tests/btrfs/280.out +++ b/tests/btrfs/280.out @@ -1,7 +1,7 @@ QA output created by 280 wrote 134217728/134217728 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' File foo fiemap before COWing extent: diff --git a/tests/btrfs/281 b/tests/btrfs/281 index ddc7d9e8b06d..2943998bee20 100755 --- a/tests/btrfs/281 +++ b/tests/btrfs/281 @@ -15,7 +15,7 @@ . ./common/preamble _begin_fstest auto quick send compress clone fiemap -. ./common/filter +. ./common/filter.btrfs . ./common/reflink . ./common/punch # for _filter_fiemap_flags @@ -53,7 +53,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 0 64K" $SCRATCH_MNT/foo \ echo "Creating snapshot and a send stream for it..." $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send --compressed-data -f $send_stream $SCRATCH_MNT/snap 2>&1 \ | _filter_scratch diff --git a/tests/btrfs/281.out b/tests/btrfs/281.out index 2585e3e567db..49c23a00baea 100644 --- a/tests/btrfs/281.out +++ b/tests/btrfs/281.out @@ -6,7 +6,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) linked 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Creating snapshot and a send stream for it... -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' At subvol SCRATCH_MNT/snap Creating a new filesystem to receive the send stream... At subvol snap diff --git a/tests/btrfs/283 b/tests/btrfs/283 index 118df08b8958..d9b8c1d24b8f 100755 --- a/tests/btrfs/283 +++ b/tests/btrfs/283 @@ -11,7 +11,7 @@ . ./common/preamble _begin_fstest auto quick send clone fiemap -. ./common/filter +. ./common/filter.btrfs . ./common/reflink . ./common/punch # for _filter_fiemap_flags @@ -58,7 +58,7 @@ $XFS_IO_PROG -c "pwrite -S 0xcd -b 64K 64K 64K" $SCRATCH_MNT/foo | _filter_xfs_i echo "Creating snapshot and a send stream for it..." $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG send -f $send_stream $SCRATCH_MNT/snap 2>&1 | _filter_scratch diff --git a/tests/btrfs/283.out b/tests/btrfs/283.out index 286dae332eff..37f425bf8312 100644 --- a/tests/btrfs/283.out +++ b/tests/btrfs/283.out @@ -4,7 +4,7 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 65536 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Creating snapshot and a send stream for it... -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap' At subvol SCRATCH_MNT/snap Creating a new filesystem to receive the send stream... At subvol snap diff --git a/tests/btrfs/287 b/tests/btrfs/287 index 64e6ef35250c..dec812760917 100755 --- a/tests/btrfs/287 +++ b/tests/btrfs/287 @@ -112,9 +112,9 @@ query_logical_ino -o $bytenr # Now create two snapshots and then do some queries. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \ - | _filter_scratch + | _filter_snapshot $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap2 \ - | _filter_scratch + | _filter_snapshot snap1_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap1) snap2_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap2) diff --git a/tests/btrfs/287.out b/tests/btrfs/287.out index 30eac8fa444c..5798ec5d7c55 100644 --- a/tests/btrfs/287.out +++ b/tests/btrfs/287.out @@ -41,8 +41,8 @@ resolve first extent +3M offset with ignore offset option: inode 257 offset 16777216 root 5 inode 257 offset 8388608 root 5 inode 257 offset 2097152 root 5 -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' resolve first extent: inode 257 offset 16777216 snap2 inode 257 offset 8388608 snap2 diff --git a/tests/btrfs/293 b/tests/btrfs/293 index 06f96dc414b0..fffdcd53441a 100755 --- a/tests/btrfs/293 +++ b/tests/btrfs/293 @@ -32,9 +32,9 @@ swap_file="$SCRATCH_MNT/swapfile" _format_swapfile $swap_file $(($(_get_page_size) * 64)) >> $seqres.full echo "Creating first snapshot..." -$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 | _filter_scratch +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 | _filter_snapshot echo "Creating second snapshot..." -$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | _filter_scratch +$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 | _filter_snapshot echo "Activating swap file... (should fail due to snapshots)" _swapon_file $swap_file 2>&1 | _filter_scratch diff --git a/tests/btrfs/293.out b/tests/btrfs/293.out index fd04ac9139b8..7b2947a705e7 100644 --- a/tests/btrfs/293.out +++ b/tests/btrfs/293.out @@ -1,8 +1,8 @@ QA output created by 293 Creating first snapshot... -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' Creating second snapshot... -Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +Create snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' Activating swap file... (should fail due to snapshots) swapon: SCRATCH_MNT/swapfile: swapon failed: Invalid argument Deleting first snapshot... diff --git a/tests/btrfs/300 b/tests/btrfs/300 index 8a0eaecf87f7..00ffcb82eae6 100755 --- a/tests/btrfs/300 +++ b/tests/btrfs/300 @@ -43,7 +43,7 @@ $BTRFS_UTIL_PROG subvolume create subvol; touch subvol/{1,2,3}; $BTRFS_UTIL_PROG subvolume create subvol/subsubvol; touch subvol/subsubvol/{4,5,6}; -$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot; +$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot | sed -e 's/Create a/Create/g'; " find $test_dir/. -printf "%M %u %g ./%P\n" diff --git a/tests/btrfs/300.out b/tests/btrfs/300.out index 6e94447e87ac..06a75bff5ce1 100644 --- a/tests/btrfs/300.out +++ b/tests/btrfs/300.out @@ -1,7 +1,7 @@ QA output created by 300 Create subvolume './subvol' Create subvolume 'subvol/subsubvol' -Create a snapshot of 'subvol' in './snapshot' +Create snapshot of 'subvol' in './snapshot' drwxr-xr-x fsgqa fsgqa ./ drwxr-xr-x fsgqa fsgqa ./subvol -rw-r--r-- fsgqa fsgqa ./subvol/1 diff --git a/tests/btrfs/302 b/tests/btrfs/302 index f3e6044b5251..52d712ac50de 100755 --- a/tests/btrfs/302 +++ b/tests/btrfs/302 @@ -15,7 +15,7 @@ . ./common/preamble _begin_fstest auto quick snapshot subvol -. ./common/filter +. ./common/filter.btrfs _supported_fs btrfs _require_scratch @@ -46,7 +46,7 @@ $FSSUM_PROG -A -f -w $fssum_file $SCRATCH_MNT/subvol # Now create a snapshot of the subvolume and make it accessible from within the # subvolume. $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol \ - $SCRATCH_MNT/subvol/snap | _filter_scratch + $SCRATCH_MNT/subvol/snap | _filter_snapshot # Now unmount and mount again the fs. We want to verify we are able to read all # metadata for the snapshot from disk (no IO failures, etc). diff --git a/tests/btrfs/302.out b/tests/btrfs/302.out index 8770aefc99c8..c08f8c135538 100644 --- a/tests/btrfs/302.out +++ b/tests/btrfs/302.out @@ -1,4 +1,4 @@ QA output created by 302 Create subvolume 'SCRATCH_MNT/subvol' -Create a readonly snapshot of 'SCRATCH_MNT/subvol' in 'SCRATCH_MNT/subvol/snap' +Create readonly snapshot of 'SCRATCH_MNT/subvol' in 'SCRATCH_MNT/subvol/snap' OK diff --git a/tests/btrfs/314 b/tests/btrfs/314 index 887cb69eb79c..598af611d249 100755 --- a/tests/btrfs/314 +++ b/tests/btrfs/314 @@ -43,7 +43,7 @@ send_receive_tempfsid() $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' ${src}/foo | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r ${src} ${src}/snap1 | \ - _filter_testdir_and_scratch + _filter_snapshot echo Send ${src} | _filter_testdir_and_scratch $BTRFS_UTIL_PROG send -f ${sendfile} ${src}/snap1 2>&1 | \ diff --git a/tests/btrfs/314.out b/tests/btrfs/314.out index 21963899c2b2..d29fe51b3ff9 100644 --- a/tests/btrfs/314.out +++ b/tests/btrfs/314.out @@ -3,7 +3,7 @@ QA output created by 314 From non-tempfsid SCRATCH_MNT to tempfsid TEST_DIR/314/tempfsid_mnt wrote 9000/9000 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' +Create readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' Send SCRATCH_MNT At subvol SCRATCH_MNT/snap1 Receive TEST_DIR/314/tempfsid_mnt @@ -14,7 +14,7 @@ Recv: 42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/314/tempfsid_mnt/snap1/foo From tempfsid TEST_DIR/314/tempfsid_mnt to non-tempfsid SCRATCH_MNT wrote 9000/9000 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Create a readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in 'TEST_DIR/314/tempfsid_mnt/snap1' +Create readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in 'TEST_DIR/314/tempfsid_mnt/snap1' Send TEST_DIR/314/tempfsid_mnt At subvol TEST_DIR/314/tempfsid_mnt/snap1 Receive SCRATCH_MNT
Btrfs-progs commit 5f87b467a9e7 ("subvolume: output the prompt line only when the ioctl succeeded") changed the output for snapshot command, updating the golden outputs. Create a helper filter to ensure the test cases pass on older btrfs-progs. Another option is to remove the 'btrfs subvolume snapshot' command output from the golden output and redirect it to /dev/null, but this strays from the bug-fix objective. Signed-off-by: Anand Jain <anand.jain@oracle.com> --- v2: The missed testcases included now. Merged following two patches in v1: common/filter.btrfs: add a new _filter_snapshot btrfs: create snapshot fix golden output common/filter.btrfs | 9 +++++++++ tests/btrfs/001 | 3 ++- tests/btrfs/001.out | 2 +- tests/btrfs/152 | 6 +++--- tests/btrfs/152.out | 4 ++-- tests/btrfs/168 | 6 +++--- tests/btrfs/168.out | 4 ++-- tests/btrfs/169 | 6 +++--- tests/btrfs/169.out | 4 ++-- tests/btrfs/170 | 4 ++-- tests/btrfs/170.out | 2 +- tests/btrfs/187 | 6 +++--- tests/btrfs/187.out | 4 ++-- tests/btrfs/188 | 8 ++++---- tests/btrfs/188.out | 4 ++-- tests/btrfs/189 | 4 ++-- tests/btrfs/189.out | 2 +- tests/btrfs/191 | 6 +++--- tests/btrfs/191.out | 4 ++-- tests/btrfs/200 | 6 +++--- tests/btrfs/200.out | 4 ++-- tests/btrfs/202 | 4 ++-- tests/btrfs/202.out | 2 +- tests/btrfs/203 | 6 +++--- tests/btrfs/203.out | 4 ++-- tests/btrfs/226 | 4 ++-- tests/btrfs/226.out | 2 +- tests/btrfs/276 | 2 +- tests/btrfs/276.out | 2 +- tests/btrfs/280 | 4 ++-- tests/btrfs/280.out | 2 +- tests/btrfs/281 | 4 ++-- tests/btrfs/281.out | 2 +- tests/btrfs/283 | 4 ++-- tests/btrfs/283.out | 2 +- tests/btrfs/287 | 4 ++-- tests/btrfs/287.out | 4 ++-- tests/btrfs/293 | 4 ++-- tests/btrfs/293.out | 4 ++-- tests/btrfs/300 | 2 +- tests/btrfs/300.out | 2 +- tests/btrfs/302 | 4 ++-- tests/btrfs/302.out | 2 +- tests/btrfs/314 | 2 +- tests/btrfs/314.out | 4 ++-- 45 files changed, 92 insertions(+), 82 deletions(-)