diff mbox series

[RFC,v2,1/8] common/encrypt: separate data and inode nonces

Message ID bc535e5b948a5f494f4ac84fb8706d827dcf2cc6.1688929294.git.sweettea-kernel@dorminy.me (mailing list archive)
State Not Applicable
Headers show
Series fstests: add btrfs encryption testing | expand

Commit Message

Sweet Tea Dorminy July 9, 2023, 7:11 p.m. UTC
btrfs will have different inode and data nonces, so we need to be
specific about which nonce each use needs. For now, there is no
difference in the two functions.

Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
---
 common/encrypt    | 33 ++++++++++++++++++++++++++-------
 tests/generic/613 |  4 ++--
 2 files changed, 28 insertions(+), 9 deletions(-)

Comments

Anand Jain July 10, 2023, 5:20 a.m. UTC | #1
> diff --git a/tests/generic/613 b/tests/generic/613
> index 4cf5ccc6..47c60e9c 100755
> --- a/tests/generic/613
> +++ b/tests/generic/613
> @@ -68,10 +68,10 @@ echo -e "\n# Getting encryption nonces from inodes"
>   echo -n > $tmp.nonces_hex
>   echo -n > $tmp.nonces_bin

>   for inode in "${inodes[@]}"; do
> -	nonce=$(_get_encryption_nonce $SCRATCH_DEV $inode)
> +	nonce=$(_get_encryption_data_nonce $SCRATCH_DEV $inode)

>   	if (( ${#nonce} != 32 )) || [ -n "$(echo "$nonce" | tr -d 0-9a-fA-F)" ]
>   	then
> -		_fail "Expected nonce to be 16 bytes (32 hex characters), but got \"$nonce\""
> +		_fail "Expected nonce for inode $inode to be 16 bytes (32 hex characters), but got \"$nonce\""
>   	fi
>   	echo $nonce >> $tmp.nonces_hex
>   	echo -ne "$(echo $nonce | sed 's/[0-9a-fA-F]\{2\}/\\x\0/g')" \


Also, the test case f2fs/002 refers to _get_encryption_nonce().

   nonce=$(_get_encryption_nonce $SCRATCH_DEV $inode)

Thanks, Anand
diff mbox series

Patch

diff --git a/common/encrypt b/common/encrypt
index 1a77e23b..04b6e5ac 100644
--- a/common/encrypt
+++ b/common/encrypt
@@ -488,7 +488,7 @@  _add_fscrypt_provisioning_key()
 # Retrieve the encryption nonce of the given inode as a hex string.  The nonce
 # was randomly generated by the filesystem and isn't exposed directly to
 # userspace.  But it can be read using the filesystem's debugging tools.
-_get_encryption_nonce()
+_get_encryption_file_nonce()
 {
 	local device=$1
 	local inode=$2
@@ -532,15 +532,34 @@  _get_encryption_nonce()
 			}'
 		;;
 	*)
-		_fail "_get_encryption_nonce() isn't implemented on $FSTYP"
+		_fail "_get_encryption_file_nonce() isn't implemented on $FSTYP"
 		;;
 	esac
 }
 
-# Require support for _get_encryption_nonce()
+# Retrieve the encryption nonce used to encrypt the data of the given inode as
+# a hex string.  The nonce was randomly generated by the filesystem and isn't
+# exposed directly to userspace.  But it can be read using the filesystem's
+# debugging tools.
+_get_encryption_data_nonce()
+{
+	local device=$1
+	local inode=$2
+
+	case $FSTYP in
+	ext4|f2fs)
+		_get_encryption_file_nonce $device $inode
+		;;
+	*)
+		_fail "_get_encryption_data_nonce() isn't implemented on $FSTYP"
+		;;
+	esac
+}
+
+# Require support for _get_encryption_*nonce()
 _require_get_encryption_nonce_support()
 {
-	echo "Checking for _get_encryption_nonce() support for $FSTYP" >> $seqres.full
+	echo "Checking for _get_encryption_*nonce() support for $FSTYP" >> $seqres.full
 	case $FSTYP in
 	ext4)
 		_require_command "$DEBUGFS_PROG" debugfs
@@ -554,7 +573,7 @@  _require_get_encryption_nonce_support()
 		# the test fail in that case, as it was an f2fs-tools bug...
 		;;
 	*)
-		_notrun "_get_encryption_nonce() isn't implemented on $FSTYP"
+		_notrun "_get_encryption_*nonce() isn't implemented on $FSTYP"
 		;;
 	esac
 }
@@ -760,7 +779,7 @@  _do_verify_ciphertext_for_encryption_policy()
 	echo "Verifying encrypted file contents" >> $seqres.full
 	for f in "${test_contents_files[@]}"; do
 		read -r src inode blocklist <<< "$f"
-		nonce=$(_get_encryption_nonce $SCRATCH_DEV $inode)
+		nonce=$(_get_encryption_data_nonce $SCRATCH_DEV $inode)
 		_dump_ciphertext_blocks $SCRATCH_DEV $blocklist > $tmp.actual_contents
 		$crypt_contents_cmd $contents_encryption_mode $raw_key_hex \
 			--file-nonce=$nonce --block-size=$blocksize \
@@ -780,7 +799,7 @@  _do_verify_ciphertext_for_encryption_policy()
 	echo "Verifying encrypted file names" >> $seqres.full
 	for f in "${test_filenames_files[@]}"; do
 		read -r name inode dir_inode padding <<< "$f"
-		nonce=$(_get_encryption_nonce $SCRATCH_DEV $dir_inode)
+		nonce=$(_get_encryption_file_nonce $SCRATCH_DEV $dir_inode)
 		_get_ciphertext_filename $SCRATCH_DEV $inode $dir_inode \
 			> $tmp.actual_name
 		echo -n "$name" | \
diff --git a/tests/generic/613 b/tests/generic/613
index 4cf5ccc6..47c60e9c 100755
--- a/tests/generic/613
+++ b/tests/generic/613
@@ -68,10 +68,10 @@  echo -e "\n# Getting encryption nonces from inodes"
 echo -n > $tmp.nonces_hex
 echo -n > $tmp.nonces_bin
 for inode in "${inodes[@]}"; do
-	nonce=$(_get_encryption_nonce $SCRATCH_DEV $inode)
+	nonce=$(_get_encryption_data_nonce $SCRATCH_DEV $inode)
 	if (( ${#nonce} != 32 )) || [ -n "$(echo "$nonce" | tr -d 0-9a-fA-F)" ]
 	then
-		_fail "Expected nonce to be 16 bytes (32 hex characters), but got \"$nonce\""
+		_fail "Expected nonce for inode $inode to be 16 bytes (32 hex characters), but got \"$nonce\""
 	fi
 	echo $nonce >> $tmp.nonces_hex
 	echo -ne "$(echo $nonce | sed 's/[0-9a-fA-F]\{2\}/\\x\0/g')" \