@@ -4,41 +4,6 @@ test_description='git grep in binary files'
. ./test-lib.sh
-nul_match () {
- matches=$1
- flags=$2
- pattern=$3
- pattern_human=$(echo "$pattern" | sed 's/Q/<NUL>/g')
-
- if test "$matches" = 1
- then
- test_expect_success "git grep -f f $flags '$pattern_human' a" "
- printf '$pattern' | q_to_nul >f &&
- git grep -f f $flags a
- "
- elif test "$matches" = 0
- then
- test_expect_success "git grep -f f $flags '$pattern_human' a" "
- printf '$pattern' | q_to_nul >f &&
- test_must_fail git grep -f f $flags a
- "
- elif test "$matches" = T1
- then
- test_expect_failure "git grep -f f $flags '$pattern_human' a" "
- printf '$pattern' | q_to_nul >f &&
- git grep -f f $flags a
- "
- elif test "$matches" = T0
- then
- test_expect_failure "git grep -f f $flags '$pattern_human' a" "
- printf '$pattern' | q_to_nul >f &&
- test_must_fail git grep -f f $flags a
- "
- else
- test_expect_success "PANIC: Test framework error. Unknown matches value $matches" 'false'
- fi
-}
-
test_expect_success 'setup' "
echo 'binaryQfileQm[*]cQ*æQð' | q_to_nul >a &&
git add a &&
@@ -102,72 +67,6 @@ test_expect_failure 'git grep .fi a' '
git grep .fi a
'
-nul_match 1 '-F' 'yQf'
-nul_match 0 '-F' 'yQx'
-nul_match 1 '-Fi' 'YQf'
-nul_match 0 '-Fi' 'YQx'
-nul_match 1 '' 'yQf'
-nul_match 0 '' 'yQx'
-nul_match 1 '' 'æQð'
-nul_match 1 '-F' 'eQm[*]c'
-nul_match 1 '-Fi' 'EQM[*]C'
-
-# Regex patterns that would match but shouldn't with -F
-nul_match 0 '-F' 'yQ[f]'
-nul_match 0 '-F' '[y]Qf'
-nul_match 0 '-Fi' 'YQ[F]'
-nul_match 0 '-Fi' '[Y]QF'
-nul_match 0 '-F' 'æQ[ð]'
-nul_match 0 '-F' '[æ]Qð'
-nul_match 0 '-Fi' 'ÆQ[Ð]'
-nul_match 0 '-Fi' '[Æ]QÐ'
-
-# kwset is disabled on -i & non-ASCII. No way to match non-ASCII \0
-# patterns case-insensitively.
-nul_match T1 '-i' 'ÆQÐ'
-
-# \0 implicitly disables regexes. This is an undocumented internal
-# limitation.
-nul_match T1 '' 'yQ[f]'
-nul_match T1 '' '[y]Qf'
-nul_match T1 '-i' 'YQ[F]'
-nul_match T1 '-i' '[Y]Qf'
-nul_match T1 '' 'æQ[ð]'
-nul_match T1 '' '[æ]Qð'
-nul_match T1 '-i' 'ÆQ[Ð]'
-
-# ... because of \0 implicitly disabling regexes regexes that
-# should/shouldn't match don't do the right thing.
-nul_match T1 '' 'eQm.*cQ'
-nul_match T1 '-i' 'EQM.*cQ'
-nul_match T0 '' 'eQm[*]c'
-nul_match T0 '-i' 'EQM[*]C'
-
-# Due to the REG_STARTEND extension when kwset() is disabled on -i &
-# non-ASCII the string will be matched in its entirety, but the
-# pattern will be cut off at the first \0.
-nul_match 0 '-i' 'NOMATCHQð'
-nul_match T0 '-i' '[Æ]QNOMATCH'
-nul_match T0 '-i' '[æ]QNOMATCH'
-# Matches, but for the wrong reasons, just stops at [æ]
-nul_match 1 '-i' '[Æ]Qð'
-nul_match 1 '-i' '[æ]Qð'
-
-# Ensure that the matcher doesn't regress to something that stops at
-# \0
-nul_match 0 '-F' 'yQ[f]'
-nul_match 0 '-Fi' 'YQ[F]'
-nul_match 0 '' 'yQNOMATCH'
-nul_match 0 '' 'QNOMATCH'
-nul_match 0 '-i' 'YQNOMATCH'
-nul_match 0 '-i' 'QNOMATCH'
-nul_match 0 '-F' 'æQ[ð]'
-nul_match 0 '-Fi' 'ÆQ[Ð]'
-nul_match 0 '' 'yQNÓMATCH'
-nul_match 0 '' 'QNÓMATCH'
-nul_match 0 '-i' 'YQNÓMATCH'
-nul_match 0 '-i' 'QNÓMATCH'
-
test_expect_success 'grep respects binary diff attribute' '
echo text >t &&
git add t &&
new file mode 100755
@@ -0,0 +1,114 @@
+#!/bin/sh
+
+test_description='git grep with a binary pattern files'
+
+. ./test-lib.sh
+
+nul_match () {
+ matches=$1
+ flags=$2
+ pattern=$3
+ pattern_human=$(echo "$pattern" | sed 's/Q/<NUL>/g')
+
+ if test "$matches" = 1
+ then
+ test_expect_success "git grep -f f $flags '$pattern_human' a" "
+ printf '$pattern' | q_to_nul >f &&
+ git grep -f f $flags a
+ "
+ elif test "$matches" = 0
+ then
+ test_expect_success "git grep -f f $flags '$pattern_human' a" "
+ printf '$pattern' | q_to_nul >f &&
+ test_must_fail git grep -f f $flags a
+ "
+ elif test "$matches" = T1
+ then
+ test_expect_failure "git grep -f f $flags '$pattern_human' a" "
+ printf '$pattern' | q_to_nul >f &&
+ git grep -f f $flags a
+ "
+ elif test "$matches" = T0
+ then
+ test_expect_failure "git grep -f f $flags '$pattern_human' a" "
+ printf '$pattern' | q_to_nul >f &&
+ test_must_fail git grep -f f $flags a
+ "
+ else
+ test_expect_success "PANIC: Test framework error. Unknown matches value $matches" 'false'
+ fi
+}
+
+test_expect_success 'setup' "
+ echo 'binaryQfileQm[*]cQ*æQð' | q_to_nul >a &&
+ git add a &&
+ git commit -m.
+"
+
+nul_match 1 '-F' 'yQf'
+nul_match 0 '-F' 'yQx'
+nul_match 1 '-Fi' 'YQf'
+nul_match 0 '-Fi' 'YQx'
+nul_match 1 '' 'yQf'
+nul_match 0 '' 'yQx'
+nul_match 1 '' 'æQð'
+nul_match 1 '-F' 'eQm[*]c'
+nul_match 1 '-Fi' 'EQM[*]C'
+
+# Regex patterns that would match but shouldn't with -F
+nul_match 0 '-F' 'yQ[f]'
+nul_match 0 '-F' '[y]Qf'
+nul_match 0 '-Fi' 'YQ[F]'
+nul_match 0 '-Fi' '[Y]QF'
+nul_match 0 '-F' 'æQ[ð]'
+nul_match 0 '-F' '[æ]Qð'
+nul_match 0 '-Fi' 'ÆQ[Ð]'
+nul_match 0 '-Fi' '[Æ]QÐ'
+
+# kwset is disabled on -i & non-ASCII. No way to match non-ASCII \0
+# patterns case-insensitively.
+nul_match T1 '-i' 'ÆQÐ'
+
+# \0 implicitly disables regexes. This is an undocumented internal
+# limitation.
+nul_match T1 '' 'yQ[f]'
+nul_match T1 '' '[y]Qf'
+nul_match T1 '-i' 'YQ[F]'
+nul_match T1 '-i' '[Y]Qf'
+nul_match T1 '' 'æQ[ð]'
+nul_match T1 '' '[æ]Qð'
+nul_match T1 '-i' 'ÆQ[Ð]'
+
+# ... because of \0 implicitly disabling regexes regexes that
+# should/shouldn't match don't do the right thing.
+nul_match T1 '' 'eQm.*cQ'
+nul_match T1 '-i' 'EQM.*cQ'
+nul_match T0 '' 'eQm[*]c'
+nul_match T0 '-i' 'EQM[*]C'
+
+# Due to the REG_STARTEND extension when kwset() is disabled on -i &
+# non-ASCII the string will be matched in its entirety, but the
+# pattern will be cut off at the first \0.
+nul_match 0 '-i' 'NOMATCHQð'
+nul_match T0 '-i' '[Æ]QNOMATCH'
+nul_match T0 '-i' '[æ]QNOMATCH'
+# Matches, but for the wrong reasons, just stops at [æ]
+nul_match 1 '-i' '[Æ]Qð'
+nul_match 1 '-i' '[æ]Qð'
+
+# Ensure that the matcher doesn't regress to something that stops at
+# \0
+nul_match 0 '-F' 'yQ[f]'
+nul_match 0 '-Fi' 'YQ[F]'
+nul_match 0 '' 'yQNOMATCH'
+nul_match 0 '' 'QNOMATCH'
+nul_match 0 '-i' 'YQNOMATCH'
+nul_match 0 '-i' 'QNOMATCH'
+nul_match 0 '-F' 'æQ[ð]'
+nul_match 0 '-Fi' 'ÆQ[Ð]'
+nul_match 0 '' 'yQNÓMATCH'
+nul_match 0 '' 'QNÓMATCH'
+nul_match 0 '-i' 'YQNÓMATCH'
+nul_match 0 '-i' 'QNÓMATCH'
+
+test_done
Move the tests for "-f <file>" where "<file>" contains a "\0" pattern into their own file. I added most of these tests in 966be95549 ("grep: add tests to fix blind spots with \0 patterns", 2017-05-20). Whether a regex engine supports matching binary content is very different from whether it matches binary patterns. Since 2f8952250a ("regex: add regexec_buf() that can work on a non NUL-terminated string", 2016-09-21) we've required REG_STARTEND of our regex engines so we can match binary content, but only the PCRE v2 engine can sensibly match binary patterns. Since 9eceddeec6 ("Use kwset in grep", 2011-08-21) we've been punting patterns containing "\0" and considering them fixed, except in cases where "--ignore-case" is provided and they're non-ASCII, see 5c1ebcca4d ("grep/icase: avoid kwsset on literal non-ascii strings", 2016-06-25). Subsequent commits will change this behavior. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> --- t/t7815-grep-binary.sh | 101 ----------------------------- t/t7816-grep-binary-pattern.sh | 114 +++++++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+), 101 deletions(-) create mode 100755 t/t7816-grep-binary-pattern.sh