diff mbox series

completion: complete remote branches with switch --track

Message ID 20200422201541.3766173-1-jacob.e.keller@intel.com (mailing list archive)
State New, archived
Headers show
Series completion: complete remote branches with switch --track | expand

Commit Message

Jacob Keller April 22, 2020, 8:15 p.m. UTC
From: Jacob Keller <jacob.keller@gmail.com>

If the --track option is supplied to git switch, then a new branch will
be created tracking the specified remote branch.

Fix git completion support so that remote branches will be completed
when --track is enabled.

Add a couple of simple test cases to help cover this new behavior. Note
that ideally completion for --track would only allow remote branches,
and would not complete all refs like HEAD, FETCH_HEAD, etc, so one of
the new tests is a test_expect_failure to capture this.

Fixes: ae36fe694180 ("completion: support switch")
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
---
I wasn't able to figure out how to get completion to ignore things like tags
and similar, but I think this is still an improvement.

 contrib/completion/git-completion.bash |  8 +++++---
 t/t9902-completion.sh                  | 22 ++++++++++++++++++++++
 2 files changed, 27 insertions(+), 3 deletions(-)

Comments

Jonathan Nieder April 23, 2020, 2:03 a.m. UTC | #1
Hi,

Jacob Keller wrote:

> If the --track option is supplied to git switch, then a new branch will
> be created tracking the specified remote branch.
>
> Fix git completion support so that remote branches will be completed
> when --track is enabled.
>
> Add a couple of simple test cases to help cover this new behavior. Note
> that ideally completion for --track would only allow remote branches,
> and would not complete all refs like HEAD, FETCH_HEAD, etc, so one of
> the new tests is a test_expect_failure to capture this.
>
> Fixes: ae36fe694180 ("completion: support switch")
> Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
> ---
> I wasn't able to figure out how to get completion to ignore things like tags
> and similar, but I think this is still an improvement.
>
>  contrib/completion/git-completion.bash |  8 +++++---
>  t/t9902-completion.sh                  | 22 ++++++++++++++++++++++
>  2 files changed, 27 insertions(+), 3 deletions(-)

Thanks for writing it.

One part I found a little confusing is that --track is being used in
two ways.  On one hand, it's an option to __git_complete_refs, meaning
to complete remote-tracking branches.  On the other hand, it's an option
to git switch, meaning to create a branch set up to "git pull" from a
remote-tracking branch.

Can the commit message give a motivating example to describe what
improvement to the user's life this change brings?  ("So now you can
type 'git ... ' and hit TAB and see ....)

Some nitpicks:

[...]
> --- a/contrib/completion/git-completion.bash
> +++ b/contrib/completion/git-completion.bash
> @@ -2235,12 +2235,14 @@ _git_switch ()
>  		if [ -n "$(__git_find_on_cmdline "--guess")" ]; then
>  			track_opt='--track'
>  		fi
> -		if [ -z "$(__git_find_on_cmdline "-d --detach")" ]; then
> -			only_local_ref=y
> -		else
> +		if [ -n "$(__git_find_on_cmdline "-d --detach")" ]; then
>  			# --guess --detach is invalid combination, no
>  			# dwim will be done when --detach is specified
>  			track_opt=
> +		elif [ -z "$(__git_find_on_cmdline "--track")" ]; then
> +			# if neither --detach or --track are specified then

language nits:

- s/or/nor/ (because the clause starts with "neither")
- s/are/is/ (because "either" and "neither" are singular)

English can be odd.

> +			# match only local refs.
> +			only_local_ref=y
>  		fi

Let me check that I understand correctly:

If --detach is passed, the <start-point> parameter is an arbitrary
commit.  So we want all refs (or even all commits), not just commits
that are eligible for "git switch --guess" (the default mode) dwimery.

If --track is passed, the <start-point> parameter should be an
arbitrary remote-tracking branch, not just a remote-tracking branch
without corresponding local branch that would be eligible for --guess.
A few lines up we handle this by setting track_opt to empty.

If neither --detach nor --track is passed, then...

... I'm not sure I understand the neither --detach nor --track passed
case.  Wouldn't this be --guess mode, where "$track_opt" is set, so the
value of "$only_local_ref" isn't used?  Or is this about the case
where (1) --detach is not passed, (2) --track is not passed, and (3)
--no-guess or GIT_COMPLETION_CHECKOUT_NO_GUESS is passed?

Yes, it must be about that case.  In that case, only_local_ref is
right.

In any case, this is getting difficult to understand, so I wonder if
some refactoring is in order.

[...]
> --- a/t/t9902-completion.sh
> +++ b/t/t9902-completion.sh
> @@ -1760,6 +1760,28 @@ do
>  	'
>  done
>  
> +test_expect_success 'git switch - default local branches only' '

nit: "default to local branches only" or "the default is local
branches only".  In other words, this should be a sentence so the
reader can understand what property we're testing for.

> +	test_completion "git switch m" <<-\EOF
> +	master Z
> +	master-in-other Z
> +	mybranch Z
> +	mytag Z
> +	EOF
> +'
> +
> +test_expect_failure 'git switch - --track remote branches' '
> +	test_completion "git switch --track " <<-\EOF
> +	other/branch-in-other Z
> +	other/master-in-other Z
> +	EOF
> +'

Can this have a short comment describing the issue?  If over time the
behavior changes, we wouldn't have an easy place to see what the
behavior was at the time this test was added.

> +
> +test_expect_success 'git switch - --track remote branches partial completion' '

"git switch --track: partially typed remote-tracking branch is completed"

> +	test_completion "git switch --track other/master-in" <<-\EOF
> +	other/master-in-other Z
> +	EOF
> +'
> +
>  test_expect_success 'git config - section' '
>  	test_completion "git config br" <<-\EOF
>  	branch.Z

Thanks and hope that helps,
Jonathan
Jacob Keller April 23, 2020, 4:33 a.m. UTC | #2
On Wed, Apr 22, 2020 at 7:03 PM Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> Hi,
>
> Jacob Keller wrote:
>
> > If the --track option is supplied to git switch, then a new branch will
> > be created tracking the specified remote branch.
> >
> > Fix git completion support so that remote branches will be completed
> > when --track is enabled.
> >
> > Add a couple of simple test cases to help cover this new behavior. Note
> > that ideally completion for --track would only allow remote branches,
> > and would not complete all refs like HEAD, FETCH_HEAD, etc, so one of
> > the new tests is a test_expect_failure to capture this.
> >
> > Fixes: ae36fe694180 ("completion: support switch")
> > Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
> > ---
> > I wasn't able to figure out how to get completion to ignore things like tags
> > and similar, but I think this is still an improvement.
> >
> >  contrib/completion/git-completion.bash |  8 +++++---
> >  t/t9902-completion.sh                  | 22 ++++++++++++++++++++++
> >  2 files changed, 27 insertions(+), 3 deletions(-)
>
> Thanks for writing it.
>
> One part I found a little confusing is that --track is being used in
> two ways.  On one hand, it's an option to __git_complete_refs, meaning
> to complete remote-tracking branches.  On the other hand, it's an option
> to git switch, meaning to create a branch set up to "git pull" from a
> remote-tracking branch.
>

Sure, I might actually just go and write a patch to switch --track to
--dwim and allow --track only for backwards compatibility with
external completions.

> Can the commit message give a motivating example to describe what
> improvement to the user's life this change brings?  ("So now you can
> type 'git ... ' and hit TAB and see ....)
>
> Some nitpicks:
>
> [...]
> > --- a/contrib/completion/git-completion.bash
> > +++ b/contrib/completion/git-completion.bash
> > @@ -2235,12 +2235,14 @@ _git_switch ()
> >               if [ -n "$(__git_find_on_cmdline "--guess")" ]; then
> >                       track_opt='--track'
> >               fi
> > -             if [ -z "$(__git_find_on_cmdline "-d --detach")" ]; then
> > -                     only_local_ref=y
> > -             else
> > +             if [ -n "$(__git_find_on_cmdline "-d --detach")" ]; then
> >                       # --guess --detach is invalid combination, no
> >                       # dwim will be done when --detach is specified
> >                       track_opt=
> > +             elif [ -z "$(__git_find_on_cmdline "--track")" ]; then
> > +                     # if neither --detach or --track are specified then
>
> language nits:
>
> - s/or/nor/ (because the clause starts with "neither")
> - s/are/is/ (because "either" and "neither" are singular)
>
> English can be odd.
>

Sure. It's easy to get this wrong, can fix.

> > +                     # match only local refs.
> > +                     only_local_ref=y
> >               fi
>
> Let me check that I understand correctly:
>
> If --detach is passed, the <start-point> parameter is an arbitrary
> commit.  So we want all refs (or even all commits), not just commits
> that are eligible for "git switch --guess" (the default mode) dwimery.
>

Yes.

> If --track is passed, the <start-point> parameter should be an
> arbitrary remote-tracking branch, not just a remote-tracking branch
> without corresponding local branch that would be eligible for --guess.
> A few lines up we handle this by setting track_opt to empty.
>
> If neither --detach nor --track is passed, then..
>
> ... I'm not sure I understand the neither --detach nor --track passed
> case.  Wouldn't this be --guess mode, where "$track_opt" is set, so the
> value of "$only_local_ref" isn't used?  Or is this about the case
> where (1) --detach is not passed, (2) --track is not passed, and (3)
> --no-guess or GIT_COMPLETION_CHECKOUT_NO_GUESS is passed?
>
> Yes, it must be about that case.  In that case, only_local_ref is
> right.
>
> In any case, this is getting difficult to understand, so I wonder if
> some refactoring is in order.
>

I think so. There's also room for improvement, because currently with
this patch:

git switch --track <TAB>

completes all refs including stuff like FETCH_HEAD, etc.

I think the most obvious thing would be to complete remote branches
only. We could complete more points if both track and -c are present,
indicating the user wants to track with a known name. (Since --track's
automatic naming is based on extracting the origin.

I don't think the current functions we use can quite handle what we
want so maybe it's time I try to dig into the gitref code to see if we
can extract the right refs with new options..

> [...]
> > --- a/t/t9902-completion.sh
> > +++ b/t/t9902-completion.sh
> > @@ -1760,6 +1760,28 @@ do
> >       '
> >  done
> >
> > +test_expect_success 'git switch - default local branches only' '
>
> nit: "default to local branches only" or "the default is local
> branches only".  In other words, this should be a sentence so the
> reader can understand what property we're testing for.
>

Yea makes sense.

> > +     test_completion "git switch m" <<-\EOF
> > +     master Z
> > +     master-in-other Z
> > +     mybranch Z
> > +     mytag Z
> > +     EOF
> > +'
> > +
> > +test_expect_failure 'git switch - --track remote branches' '
> > +     test_completion "git switch --track " <<-\EOF
> > +     other/branch-in-other Z
> > +     other/master-in-other Z
> > +     EOF
> > +'
>
> Can this have a short comment describing the issue?  If over time the
> behavior changes, we wouldn't have an easy place to see what the
> behavior was at the time this test was added.
>

Yes, I'll add a sentence.

> > +
> > +test_expect_success 'git switch - --track remote branches partial completion' '
>
> "git switch --track: partially typed remote-tracking branch is completed"
>
> > +     test_completion "git switch --track other/master-in" <<-\EOF
> > +     other/master-in-other Z
> > +     EOF
> > +'
> > +
> >  test_expect_success 'git config - section' '
> >       test_completion "git config br" <<-\EOF
> >       branch.Z
>
> Thanks and hope that helps,
> Jonathan

Thanks. I greatly appreciate the review!

Regards,
Jake
Jacob Keller April 23, 2020, 11:46 p.m. UTC | #3
On Wed, Apr 22, 2020 at 7:03 PM Jonathan Nieder <jrnieder@gmail.com> wrote:
>
> Let me check that I understand correctly:
>

I do not believe your understanding here is correct. This is about the
case where you try to complete

git switch --track <TAB>

I expect this to complete to the list of all remote branches, and
*not* to include local branches that already exist.

Today, on git version 2.25.2,

git switch --track <TAB> completes only to local branches.

git switch <TAB> appears to complete to basically any reference.

> If --detach is passed, the <start-point> parameter is an arbitrary
> commit.  So we want all refs (or even all commits), not just commits
> that are eligible for "git switch --guess" (the default mode) dwimery.
>

Yep, I agree here.

> If --track is passed, the <start-point> parameter should be an
> arbitrary remote-tracking branch, not just a remote-tracking branch
> without corresponding local branch that would be eligible for --guess.
> A few lines up we handle this by setting track_opt to empty.
>

Sort of. Yes, we do disable "track_opt", but, because --detach is
*not* set, we also set only_local_ref=y.

In this case, when only_local_ref=y, and when track_opt is not set, we
trigger the call to __git_heads instead of __git_complete_refs.

I *think* the problem is that we actually got something inverted in a sense:

We probably do want git switch to complete only local branches and
dwims, not arbitrary references.

> If neither --detach nor --track is passed, then...
>
> ... I'm not sure I understand the neither --detach nor --track passed
> case.  Wouldn't this be --guess mode, where "$track_opt" is set, so the
> value of "$only_local_ref" isn't used?  Or is this about the case
> where (1) --detach is not passed, (2) --track is not passed, and (3)
> --no-guess or GIT_COMPLETION_CHECKOUT_NO_GUESS is passed?
>
> Yes, it must be about that case.  In that case, only_local_ref is
> right.
>

that seems to behave properly, i.e.

git switch --no-guess <TAB> will complete only local branches.

> In any case, this is getting difficult to understand, so I wonder if
> some refactoring is in order.
>

The trouble here is that we accidentally trigger that behavior if you do

git switch --track

because we set track_opt to none, *and* we set only_local_refs to y,
resulting in just calling git_heads.

I think the trouble is that __git_complete_refs prints far more than
we want, so it needs some new options to avoid printing certain
settings.

I *think* the problem is that --dwim lists *both* local refs *and*
unique branches from remotes, and because it lists local references,
we end up displaying a bunch of unnecessary refs like tags and such.

Hmm.

Thanks,
Jake
diff mbox series

Patch

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index c21786f2fd00..6de341fd1587 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2235,12 +2235,14 @@  _git_switch ()
 		if [ -n "$(__git_find_on_cmdline "--guess")" ]; then
 			track_opt='--track'
 		fi
-		if [ -z "$(__git_find_on_cmdline "-d --detach")" ]; then
-			only_local_ref=y
-		else
+		if [ -n "$(__git_find_on_cmdline "-d --detach")" ]; then
 			# --guess --detach is invalid combination, no
 			# dwim will be done when --detach is specified
 			track_opt=
+		elif [ -z "$(__git_find_on_cmdline "--track")" ]; then
+			# if neither --detach or --track are specified then
+			# match only local refs.
+			only_local_ref=y
 		fi
 		if [ $only_local_ref = y -a -z "$track_opt" ]; then
 			__gitcomp_direct "$(__git_heads "" "$cur" " ")"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 5505e5aa249e..a2478eae6933 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -1760,6 +1760,28 @@  do
 	'
 done
 
+test_expect_success 'git switch - default local branches only' '
+	test_completion "git switch m" <<-\EOF
+	master Z
+	master-in-other Z
+	mybranch Z
+	mytag Z
+	EOF
+'
+
+test_expect_failure 'git switch - --track remote branches' '
+	test_completion "git switch --track " <<-\EOF
+	other/branch-in-other Z
+	other/master-in-other Z
+	EOF
+'
+
+test_expect_success 'git switch - --track remote branches partial completion' '
+	test_completion "git switch --track other/master-in" <<-\EOF
+	other/master-in-other Z
+	EOF
+'
+
 test_expect_success 'git config - section' '
 	test_completion "git config br" <<-\EOF
 	branch.Z