| Message ID | 20201012184806.166251-3-smcallis@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
Hi Sean, On Mon, 12 Oct 2020, Sean McAllister wrote: > Some HTTP response codes indicate a server state that can support > retrying the request rather than immediately erroring out. The server > can also provide information about how long to wait before retries to > via the Retry-After header. So check the server response and retry > some reasonable number of times before erroring out to better accomodate > transient errors. > > Exiting immediately becomes irksome when pulling large multi-repo code > bases such as Android or Chromium, as often the entire fetch operation > has to be restarted from the beginning due to an error in one repo. If > we can reduce how often that occurs, then it's a big win. Makes a lot of sense to me. > > Signed-off-by: Sean McAllister <smcallis@google.com> > --- > Documentation/config/http.txt | 5 ++ > http.c | 121 +++++++++++++++++++++++++++++++++- > http.h | 13 +++- > remote-curl.c | 2 +- > t/t5539-fetch-http-shallow.sh | 41 ++++++++---- > t/t5540-http-push-webdav.sh | 26 +++++++- > t/t5541-http-push-smart.sh | 15 +++++ > t/t5550-http-fetch-dumb.sh | 12 ++++ > t/t5551-http-fetch-smart.sh | 14 ++++ > t/t5601-clone.sh | 6 +- > 10 files changed, 237 insertions(+), 18 deletions(-) > > diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt > index 3968fbb697..0beec3d370 100644 > --- a/Documentation/config/http.txt > +++ b/Documentation/config/http.txt > @@ -260,6 +260,11 @@ http.followRedirects:: > the base for the follow-up requests, this is generally > sufficient. The default is `initial`. > > +http.retryLimit:: > + Some HTTP error codes (eg: 429,503) can reasonably be retried if Please have a space after the comma so that it is not being mistaken for a 6-digit number. Also, aren't they called "status codes"? Not all of them indicate errors, after all. > + they're encountered. This value configures the number of retry attempts > + before giving up. The default retry limit is 3. > + > http.<url>.*:: > Any of the http.* options above can be applied selectively to some URLs. > For a config key to match a URL, each element of the config key is > diff --git a/http.c b/http.c > index b3c1669388..e41d7c5575 100644 > --- a/http.c > +++ b/http.c > @@ -92,6 +92,9 @@ static const char *http_proxy_ssl_key; > static const char *http_proxy_ssl_ca_info; > static struct credential proxy_cert_auth = CREDENTIAL_INIT; > static int proxy_ssl_cert_password_required; > +static int http_retry_limit = 3; > +static int http_default_delay = 2; Should there be a config option for that? Also, it took me some time to find the code using this variable in order to find out what unit to use: it is seconds (not microseconds, as I had expected). Maybe this can be documented in the variable name, or at least in a comment? > +static int http_max_delay = 60; > > static struct { > const char *name; > @@ -219,6 +222,51 @@ size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf) > return nmemb; > } > > + > +/* return 1 for a retryable HTTP code, 0 otherwise */ > +static int retryable_code(int code) > +{ > + switch(code) { > + case 429: /* fallthrough */ > + case 502: /* fallthrough */ > + case 503: /* fallthrough */ > + case 504: return 1; > + default: return 0; > + } > +} > + > +size_t http_header_value( In the part of Git's code with which I am familiar, we avoid trying to break the line after an opening parenthesis, instead preferring to break after a comma. Also, shouldn't we make the return type `ssize_t` to allow for a negative value to indicate an error/missing header? > + const struct strbuf headers, const char *header, char **value) > +{ > + size_t len = 0; > + struct strbuf **lines, **line; > + char *colon = NULL; > + > + lines = strbuf_split(&headers, '\n'); > + for (line = lines; *line; line++) { > + strbuf_trim(*line); > + > + /* find colon and null it out to 'split' string */ > + colon = strchr((*line)->buf, ':'); > + if (colon) { > + *colon = '\0'; > + > + if (!strcasecmp(header, (*line)->buf)) { If all we want is to find the given header, splitting lines seems to be a bit wasteful to me. We could instead search for the header directly: const char *p = strcasestr(headers.buf, header), *eol; size_t header_len = strlen(header); while (p) { if ((p != headers.buf && p[-1] != '\n') || p[header_len] != ':') { p = strcasestr(p + header_len, header); continue; } p += header_len + 1; while (isspace(*p) && *p != '\n') p++; eol = strchrnul(p, '\n'); len = eol - p; *value = xstrndup(p, len); return len; } > + /* move past colon and skip whitespace */ > + colon++; > + while (*colon && isspace(*colon)) colon++; > + *value = xstrdup(colon); > + len = strlen(*value); > + goto done; > + } > + } > + } > + > +done: > + strbuf_list_free(lines); > + return len; > +} > + > static void closedown_active_slot(struct active_request_slot *slot) > { > active_requests--; > @@ -452,6 +500,11 @@ static int http_options(const char *var, const char *value, void *cb) > return 0; > } > > + if (!strcmp("http.retrylimit", var)) { > + http_retry_limit = git_config_int(var, value); > + return 0; > + } > + > /* Fall back on the default ones */ > return git_default_config(var, value, cb); > } > @@ -1668,7 +1721,7 @@ static int handle_curl_result(struct slot_results *results) > } > > int run_one_slot(struct active_request_slot *slot, > - struct slot_results *results) > + struct slot_results *results, int *http_code) > { > slot->results = results; > if (!start_active_slot(slot)) { > @@ -1678,6 +1731,8 @@ int run_one_slot(struct active_request_slot *slot, > } > > run_active_slot(slot); > + if (http_code) > + *http_code = results->http_code; > return handle_curl_result(results); > } > > @@ -1903,20 +1958,55 @@ static void http_opt_request_remainder(CURL *curl, off_t pos) > #define HTTP_REQUEST_STRBUF 0 > #define HTTP_REQUEST_FILE 1 > > +/* check for a retry-after header in the given headers string, if found, then > +honor it, otherwise do an exponential backoff up to the max on the current delay > +*/ Multi-line comments should be of this form: /* * Check for a retry-after header in the given headers string, if * found, then honor it, otherwise do an exponential backoff up to * the maximum on the current delay. */ > +static int http_retry_after(const struct strbuf headers, int cur_delay) { For functions, the initial opening curly bracket goes on its own line. > + int len, delay; > + char *end; > + char *value; Why not declare `char *end, *value;`, just like `len` and `delay` are declared on the same line? > + > + len = http_header_value(headers, "retry-after", &value); > + if (len) { > + delay = strtol(value, &end, 0); > + if (*value && *end == 0 && delay >= 0) { Better: `*end == '\0'` And why `*value` here? We already called `strtol()` on it. > + if (delay > http_max_delay) { > + die(Q_( Let's not end the line in an opening parenthesis. Instead, use C's string continuation like so: die(Q_("server requested retry after %d second," " which is longer than max allowed\n", "server requested retry after %d " "seconds, which is longer than max " "allowed\n", delay), delay); > + "server requested retry after %d second, which is longer than max allowed\n", > + "server requested retry after %d seconds, which is longer than max allowed\n", delay), delay); > + } > + free(value); `value` is not actually used after that `strtol()` call above, so let's release it right then and there. > + return delay; > + } > + free(value); > + } If the header was found, but for some reason had an empty value, we're leaking `value` here. > + > + cur_delay *= 2; > + return cur_delay >= http_max_delay ? http_max_delay : cur_delay; > +} > + > static int http_request(const char *url, > void *result, int target, > const struct http_get_options *options) > { > struct active_request_slot *slot; > struct slot_results results; > - struct curl_slist *headers = http_copy_default_headers(); > + struct curl_slist *headers; > struct strbuf buf = STRBUF_INIT; > + struct strbuf result_headers = STRBUF_INIT; > const char *accept_language; > int ret; > + int retry_cnt = 0; > + int retry_delay = http_default_delay; > + int http_code; > > +retry: > slot = get_active_slot(); > curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1); > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, &result_headers); > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, fwrite_buffer); > + > if (result == NULL) { > curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1); > } else { > @@ -1936,6 +2026,7 @@ static int http_request(const char *url, > > accept_language = get_accept_language(); > > + headers = http_copy_default_headers(); > if (accept_language) > headers = curl_slist_append(headers, accept_language); > > @@ -1961,7 +2052,31 @@ static int http_request(const char *url, > curl_easy_setopt(slot->curl, CURLOPT_ENCODING, ""); > curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0); > > - ret = run_one_slot(slot, &results); > + http_code = 0; > + ret = run_one_slot(slot, &results, &http_code); > + > + if (ret != HTTP_OK) { > + if (retryable_code(http_code) && (retry_cnt < http_retry_limit)) { The parentheses around the second condition should be dropped. > + retry_cnt++; > + retry_delay = http_retry_after(result_headers, retry_delay); > + fprintf(stderr, Should this be a `warning()` instead? I see 5 instances in `http.c` that use `fprintf(stderr, ...)`, but 12 that use `warning()`, making me believe that at least some of those 5 instances should call `warning()` instead, too. > + Q_("got HTTP response %d, retrying after %d second (%d/%d)\n", > + "got HTTP response %d, retrying after %d seconds (%d/%d)\n", > + retry_delay), > + http_code, retry_delay, retry_cnt, http_retry_limit); > + sleep(retry_delay); > + > + // remove header data fields since not all slots will use them No C++-style comments, please: use /* ... */ instead. > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); > + > + goto retry; > + } > + } > + > + // remove header data fields since not all slots will use them No C++-style comments, please. > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); Shouldn't we just perform this assignment before the `if (ret != HTTP_OK)` condition? I do not see anything inside that block that needs it, therefore this could be DRY'd up. > > if (options && options->content_type) { > struct strbuf raw = STRBUF_INIT; > diff --git a/http.h b/http.h > index 5de792ef3f..60ce03801f 100644 > --- a/http.h > +++ b/http.h > @@ -86,6 +86,17 @@ size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf); > curlioerr ioctl_buffer(CURL *handle, int cmd, void *clientp); > #endif > > +/* > + * Query the value of an HTTP header. > + * > + * If the header is found, then a newly allocate string is returned through > + * the value parameter, and the length is returned. > + * > + * If not found, returns 0 > + */ > +size_t http_header_value( > + const struct strbuf headers, const char *header, char **value); Do we really need to export this function? It could stay file-local, at least for now (i.e. be defined `static` inside `http.c`), no? > + > /* Slot lifecycle functions */ > struct active_request_slot *get_active_slot(void); > int start_active_slot(struct active_request_slot *slot); > @@ -99,7 +110,7 @@ void finish_all_active_slots(void); > * > */ > int run_one_slot(struct active_request_slot *slot, > - struct slot_results *results); > + struct slot_results *results, int *http_code); > > #ifdef USE_CURL_MULTI > void fill_active_slots(void); > diff --git a/remote-curl.c b/remote-curl.c > index 7f44fa30fe..2657c95bcb 100644 > --- a/remote-curl.c > +++ b/remote-curl.c > @@ -805,7 +805,7 @@ static int run_slot(struct active_request_slot *slot, > if (!results) > results = &results_buf; > > - err = run_one_slot(slot, results); > + err = run_one_slot(slot, results, NULL); > > if (err != HTTP_OK && err != HTTP_REAUTH) { > struct strbuf msg = STRBUF_INIT; > diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh > index 82aa99ae87..e09083e2b3 100755 > --- a/t/t5539-fetch-http-shallow.sh > +++ b/t/t5539-fetch-http-shallow.sh > @@ -30,20 +30,39 @@ test_expect_success 'clone http repository' ' > git clone --bare --no-local shallow "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && > git clone $HTTPD_URL/smart/repo.git clone && > ( > - cd clone && > - git fsck && > - git log --format=%s origin/master >actual && > - cat <<EOF >expect && > -7 > -6 > -5 > -4 > -3 > -EOF > - test_cmp expect actual > + cd clone && > + git fsck && > + git log --format=%s origin/master >actual && > + cat <<-\EOF >expect && > + 7 > + 6 > + 5 > + 4 > + 3 > + EOF > + test_cmp expect actual This just changes the indentation, right? I _guess_ this is a good change, but it should live in its own patch. > ) > ' > > +test_expect_success 'clone http repository with flaky http' ' > + rm -rf clone && Let's consistently use horizontal tab characters for indentation. (There are more instances of lines indented by spaces below.) > + git clone $HTTPD_URL/error_ntime/`gen_nonce`/3/429/1/smart/repo.git clone 2>err && Let's use `$(gen_nonce)`. Also: where is the `gen_nonce` defined? I do not see the definition in this patch (but it could be 1/3, which for some reason did not make it to the mailing list: https://lore.kernel.org/git/20201012184806.166251-1-smcallis@google.com/). Another suggestion: rather than deleting `clone/`, use a separate directory to clone into, say, `flaky/`. That will make it easier to debug when the entire "trash" directory is tar'ed up in a failed CI build, for example. > + ( > + cd clone && > + git fsck && > + git log --format=%s origin/master >actual && > + cat <<-\EOF >expect && > + 7 > + 6 > + 5 > + 4 > + 3 > + EOF > + test_cmp expect actual > + ) && > + test_i18ngrep "got HTTP response 429" err > +' > + > # This test is tricky. We need large enough "have"s that fetch-pack > # will put pkt-flush in between. Then we need a "have" the server > # does not have, it'll send "ACK %s ready" > diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh > index 450321fddb..d8234d555c 100755 > --- a/t/t5540-http-push-webdav.sh > +++ b/t/t5540-http-push-webdav.sh > @@ -68,12 +68,36 @@ test_expect_success 'push already up-to-date' ' > git push > ' > > +test_expect_success 'push to remote repository with packed refs and flakey server' ' > + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > + rm -rf packed-refs && > + git update-ref refs/heads/master $ORIG_HEAD && > + git --bare update-server-info) && > + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/test_repo.git && > + git push && > + git remote set-url origin $HTTPD_URL/dumb/test_repo.git && > + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > + test $HEAD = $(git rev-parse --verify HEAD)) > +' > + > test_expect_success 'push to remote repository with unpacked refs' ' > (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > - rm packed-refs && > + rm -rf packed-refs && > + git update-ref refs/heads/master $ORIG_HEAD && > + git --bare update-server-info) && > + git push && > + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > + test $HEAD = $(git rev-parse --verify HEAD)) > +' > + > +test_expect_success 'push to remote repository with unpacked refs and flakey server' ' > + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > + rm -rf packed-refs && > git update-ref refs/heads/master $ORIG_HEAD && > git --bare update-server-info) && > + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/test_repo.git && > git push && > + git remote set-url origin $HTTPD_URL/dumb/test_repo.git && > (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > test $HEAD = $(git rev-parse --verify HEAD)) > ' > diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh > index 187454f5dd..9b2fc62e11 100755 > --- a/t/t5541-http-push-smart.sh > +++ b/t/t5541-http-push-smart.sh > @@ -77,6 +77,21 @@ test_expect_success 'push to remote repository (standard)' ' > test $HEAD = $(git rev-parse --verify HEAD)) > ' > > +test_expect_success 'push to remote repository (flakey server)' ' > + cd "$ROOT_PATH"/test_repo_clone && > + : >path5 && > + git add path5 && > + test_tick && > + git commit -m path5 && > + HEAD=$(git rev-parse --verify HEAD) && > + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/smart/test_repo.git && > + GIT_TRACE_CURL=true git push -v -v 2>err && > + git remote set-url origin $HTTPD_URL/smart/test_repo.git && > + grep "POST git-receive-pack ([0-9]* bytes)" err && > + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && > + test $HEAD = $(git rev-parse --verify HEAD)) > +' > + > test_expect_success 'push already up-to-date' ' > git push > ' > diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh > index 483578b2d7..350c47097b 100755 > --- a/t/t5550-http-fetch-dumb.sh > +++ b/t/t5550-http-fetch-dumb.sh > @@ -176,6 +176,18 @@ test_expect_success 'fetch changes via http' ' > test_cmp file clone/file > ' > > +test_expect_success 'fetch changes via flakey http' ' > + echo content >>file && > + git commit -a -m three && > + git push public && > + (cd clone && > + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/repo.git && > + git pull 2>../err && > + git remote set-url origin $HTTPD_URL/dumb/repo.git) && > + test_i18ngrep "got HTTP response 502" err && > + test_cmp file clone/file > +' > + > test_expect_success 'fetch changes via manual http-fetch' ' > cp -R clone-tmpl clone2 && > > diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh > index e40e9ed52f..85d2a0e8b8 100755 > --- a/t/t5551-http-fetch-smart.sh > +++ b/t/t5551-http-fetch-smart.sh > @@ -45,6 +45,7 @@ test_expect_success 'clone http repository' ' > EOF > GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION=0 \ > git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && > + cd clone && git config pull.rebase false && cd .. && Better: test_config -C clone pull.rebase false > test_cmp file clone/file && > tr '\''\015'\'' Q <err | > sed -e " > @@ -103,6 +104,19 @@ test_expect_success 'fetch changes via http' ' > test_cmp file clone/file > ' > > +test_expect_success 'fetch changes via flakey http' ' > + echo content >>file && > + git commit -a -m two && > + git push public && > + (cd clone && > + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/smart/repo.git && > + git pull 2>../err && > + git remote set-url origin $HTTPD_URL/smart/repo.git) && > + test_cmp file clone/file && > + test_i18ngrep "got HTTP response 502" err > +' > + > + > test_expect_success 'used upload-pack service' ' > cat >exp <<-\EOF && > GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 > diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh > index 71d4307001..9988e3ff14 100755 > --- a/t/t5601-clone.sh > +++ b/t/t5601-clone.sh > @@ -757,13 +757,17 @@ test_expect_success 'partial clone using HTTP' ' > ' > > test_expect_success 'partial clone using HTTP with redirect' ' > - _NONCE=`gen_nonce` && export _NONCE && > + _NONCE=`gen_nonce` && > curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && > curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && > curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && > partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > ' > > +test_expect_success 'partial clone with retry' ' > + partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/error_ntime/`gen_nonce`/3/429/1/smart/server" 2>err && > + test_i18ngrep "got HTTP response 429" err > +' I wonder whether it is really necessary to add _that_ many test cases. The test suite already takes so long to run that we had cases where contributors simply did not run it before sending their contributions. In this instance, I would think that it would be plenty sufficient to have a single new test case that exercizes the added code path (and verifies that it can see the message). Thanks, Dscho > > # DO NOT add non-httpd-specific tests here, because the last part of this > # test script is only executed when httpd is available and enabled. > -- > 2.28.0.1011.ga647a8990f-goog > >
Johannes Schindelin <Johannes.Schindelin@gmx.de> writes: > Hi Sean, > > On Mon, 12 Oct 2020, Sean McAllister wrote: > >> Some HTTP response codes indicate a server state that can support >> retrying the request rather than immediately erroring out. The server >> can also provide information about how long to wait before retries to >> via the Retry-After header. So check the server response and retry >> some reasonable number of times before erroring out to better accomodate >> transient errors. >> >> Exiting immediately becomes irksome when pulling large multi-repo code >> bases such as Android or Chromium, as often the entire fetch operation >> has to be restarted from the beginning due to an error in one repo. If >> we can reduce how often that occurs, then it's a big win. > > Makes a lot of sense to me. > ... >> +http.retryLimit:: >> + Some HTTP error codes (eg: 429,503) can reasonably be retried if > > Please have a space after the comma so that it is not being mistaken for a > 6-digit number. Also, aren't they called "status codes"? Not all of them > indicate errors, after all. > ... I've read your comments and agree to them all. Thanks for a detailed and excellent review.
> > > > +http.retryLimit:: > > + Some HTTP error codes (eg: 429,503) can reasonably be retried if > > Please have a space after the comma so that it is not being mistaken for a > 6-digit number. Also, aren't they called "status codes"? Not all of them > indicate errors, after all. Done for v2, good point on the nomenclature. > > diff --git a/http.c b/http.c > > index b3c1669388..e41d7c5575 100644 > > --- a/http.c > > +++ b/http.c > > @@ -92,6 +92,9 @@ static const char *http_proxy_ssl_key; > > static const char *http_proxy_ssl_ca_info; > > static struct credential proxy_cert_auth = CREDENTIAL_INIT; > > static int proxy_ssl_cert_password_required; > > +static int http_retry_limit = 3; > > +static int http_default_delay = 2; > > Should there be a config option for that? Also, it took me some time to > find the code using this variable in order to find out what unit to use: > it is seconds (not microseconds, as I had expected). Maybe this can be > documented in the variable name, or at least in a comment? > Junio tossed that out during our private review and I think we decided to just leave them as non-const so we have that option going forward. I'm not sure there's a strong story for configuring the default delay. I went through and changed all the _delay variables to be more explicit they're in seconds. > > @@ -219,6 +222,51 @@ size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf) > > return nmemb; > > } > > > > + > > +/* return 1 for a retryable HTTP code, 0 otherwise */ > > +static int retryable_code(int code) > > +{ > > + switch(code) { > > + case 429: /* fallthrough */ > > + case 502: /* fallthrough */ > > + case 503: /* fallthrough */ > > + case 504: return 1; > > + default: return 0; > > + } > > +} > > + > > +size_t http_header_value( > > In the part of Git's code with which I am familiar, we avoid trying to > break the line after an opening parenthesis, instead preferring to break > after a comma. > > Also, shouldn't we make the return type `ssize_t` to allow for a negative > value to indicate an error/missing header? I return zero to indicate no header found (or zero-length value), so this should never return a negative value. One can check value to see if a string was allocated for a zero-length header. > > > + const struct strbuf headers, const char *header, char **value) > > +{ > > + size_t len = 0; > > + struct strbuf **lines, **line; > > + char *colon = NULL; > > + > > + lines = strbuf_split(&headers, '\n'); > > + for (line = lines; *line; line++) { > > + strbuf_trim(*line); > > + > > + /* find colon and null it out to 'split' string */ > > + colon = strchr((*line)->buf, ':'); > > + if (colon) { > > + *colon = '\0'; > > + > > + if (!strcasecmp(header, (*line)->buf)) { > > If all we want is to find the given header, splitting lines seems to be a > bit wasteful to me. We could instead search for the header directly: > > const char *p = strcasestr(headers.buf, header), *eol; > size_t header_len = strlen(header); > > while (p) { > if ((p != headers.buf && p[-1] != '\n') || > p[header_len] != ':') { > p = strcasestr(p + header_len, header); > continue; > } > > p += header_len + 1; > while (isspace(*p) && *p != '\n') > p++; > eol = strchrnul(p, '\n'); > len = eol - p; > *value = xstrndup(p, len); > return len; > } > I've been writing a lot of python code lately =D So splitting into lines was a natural paradigm for me. You're right, I like yours more. I've refactored it to be closer to that. Little bit of fiddling to deal with header whitespace properly, but it's pretty close. I also modified to just return the value pointer directly, then it's clear when we get a zero-length header or don't find it completely, and it fixes the leak issue below. > > @@ -1903,20 +1958,55 @@ static void http_opt_request_remainder(CURL *curl, off_t pos) > > #define HTTP_REQUEST_STRBUF 0 > > #define HTTP_REQUEST_FILE 1 > > > > +/* check for a retry-after header in the given headers string, if found, then > > +honor it, otherwise do an exponential backoff up to the max on the current delay > > +*/ > > Multi-line comments should be of this form: > > /* > * Check for a retry-after header in the given headers string, if > * found, then honor it, otherwise do an exponential backoff up to > * the maximum on the current delay. > */ > Done. > > +static int http_retry_after(const struct strbuf headers, int cur_delay) { > > For functions, the initial opening curly bracket goes on its own line. > Done. > > + int len, delay; > > + char *end; > > + char *value; > > Why not declare `char *end, *value;`, just like `len` and `delay` are > declared on the same line? > Done. > > + > > + len = http_header_value(headers, "retry-after", &value); > > + if (len) { > > + delay = strtol(value, &end, 0); > > + if (*value && *end == 0 && delay >= 0) { > > Better: `*end == '\0'` > > And why `*value` here? We already called `strtol()` on it. > Fixed, and I check value per the man page on strtol: > In particular, if *nptr is not '\0' but **endptr is '\0' on return, the entire string is valid. I wanted to make sure I converted the entire header value, so this seemed correct? > > + if (delay > http_max_delay) { > > + die(Q_( > > Let's not end the line in an opening parenthesis. Instead, use C's string > continuation like so: > > die(Q_("server requested retry after %d second," > " which is longer than max allowed\n", > "server requested retry after %d " > "seconds, which is longer than max " > "allowed\n", delay), delay); > Done. > > + "server requested retry after %d second, which is longer than max allowed\n", > > + "server requested retry after %d seconds, which is longer than max allowed\n", delay), delay); > > + } > > + free(value); > > `value` is not actually used after that `strtol()` call above, so let's > release it right then and there. > Good call, done. > > + return delay; > > + } > > + free(value); > > + } > > If the header was found, but for some reason had an empty value, we're > leaking `value` here. > I return the pointer directly and check that now, so if it's allocated, we'll always call free, even if it's an empty string. > > + > > + cur_delay *= 2; > > + return cur_delay >= http_max_delay ? http_max_delay : cur_delay; > > +} > > + > > static int http_request(const char *url, > > void *result, int target, > > const struct http_get_options *options) > > { > > struct active_request_slot *slot; > > struct slot_results results; > > - struct curl_slist *headers = http_copy_default_headers(); > > + struct curl_slist *headers; > > struct strbuf buf = STRBUF_INIT; > > + struct strbuf result_headers = STRBUF_INIT; > > const char *accept_language; > > int ret; > > + int retry_cnt = 0; > > + int retry_delay = http_default_delay; > > + int http_code; > > > > +retry: > > slot = get_active_slot(); > > curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1); > > > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, &result_headers); > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, fwrite_buffer); > > + > > if (result == NULL) { > > curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1); > > } else { > > @@ -1936,6 +2026,7 @@ static int http_request(const char *url, > > > > accept_language = get_accept_language(); > > > > + headers = http_copy_default_headers(); > > if (accept_language) > > headers = curl_slist_append(headers, accept_language); > > > > @@ -1961,7 +2052,31 @@ static int http_request(const char *url, > > curl_easy_setopt(slot->curl, CURLOPT_ENCODING, ""); > > curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0); > > > > - ret = run_one_slot(slot, &results); > > + http_code = 0; > > + ret = run_one_slot(slot, &results, &http_code); > > + > > + if (ret != HTTP_OK) { > > + if (retryable_code(http_code) && (retry_cnt < http_retry_limit)) { > > The parentheses around the second condition should be dropped. > Done. > > + retry_cnt++; > > + retry_delay = http_retry_after(result_headers, retry_delay); > > + fprintf(stderr, > > Should this be a `warning()` instead? I see 5 instances in `http.c` that > use `fprintf(stderr, ...)`, but 12 that use `warning()`, making me believe > that at least some of those 5 instances should call `warning()` instead, > too. > At your discretion. I'm not familiar with the logging framework. Only one of those 5 fprintf is in my patch, so I changed that one to use warning(). > > + Q_("got HTTP response %d, retrying after %d second (%d/%d)\n", > > + "got HTTP response %d, retrying after %d seconds (%d/%d)\n", > > + retry_delay), > > + http_code, retry_delay, retry_cnt, http_retry_limit); > > + sleep(retry_delay); > > + > > + // remove header data fields since not all slots will use them > > No C++-style comments, please: use /* ... */ instead. > Thought I got them all. Done. > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); > > + > > + goto retry; > > + } > > + } > > + > > + // remove header data fields since not all slots will use them > > No C++-style comments, please. > Done. > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); > > + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); > > Shouldn't we just perform this assignment before the `if (ret != HTTP_OK)` > condition? I do not see anything inside that block that needs it, > therefore this could be DRY'd up. > Excellent idea, done. > > +/* > > + * Query the value of an HTTP header. > > + * > > + * If the header is found, then a newly allocate string is returned through > > + * the value parameter, and the length is returned. > > + * > > + * If not found, returns 0 > > + */ > > +size_t http_header_value( > > + const struct strbuf headers, const char *header, char **value); > > Do we really need to export this function? It could stay file-local, at > least for now (i.e. be defined `static` inside `http.c`), no? > I originally thought I'd need it elsewhere, so a big of a relic there. I made it static for now. > > --- a/t/t5539-fetch-http-shallow.sh > > +++ b/t/t5539-fetch-http-shallow.sh > > @@ -30,20 +30,39 @@ test_expect_success 'clone http repository' ' > > git clone --bare --no-local shallow "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && > > git clone $HTTPD_URL/smart/repo.git clone && > > ( > > - cd clone && > > - git fsck && > > - git log --format=%s origin/master >actual && > > - cat <<EOF >expect && > > -7 > > -6 > > -5 > > -4 > > -3 > > -EOF > > - test_cmp expect actual > > + cd clone && > > + git fsck && > > + git log --format=%s origin/master >actual && > > + cat <<-\EOF >expect && > > + 7 > > + 6 > > + 5 > > + 4 > > + 3 > > + EOF > > + test_cmp expect actual > > This just changes the indentation, right? > > I _guess_ this is a good change, but it should live in its own patch. > This was in combination with my adding a new test, we cleaned up the whitespace too per Junio rather than copy-and-pasting ill formatted code. It's OBE now because this change has been removed in v2. > > +test_expect_success 'clone http repository with flaky http' ' > > + rm -rf clone && > > Let's consistently use horizontal tab characters for indentation. (There > are more instances of lines indented by spaces below.) > *sigh* thought I got them all, fixed. > > + git clone $HTTPD_URL/error_ntime/`gen_nonce`/3/429/1/smart/repo.git clone 2>err && > > Let's use `$(gen_nonce)`. Also: where is the `gen_nonce` defined? I do not > see the definition in this patch (but it could be 1/3, which for some > reason did not make it to the mailing list: > https://lore.kernel.org/git/20201012184806.166251-1-smcallis@google.com/). > Done, and it is indeed in 1/3 which got caught by the spam filter (should be available now). > Another suggestion: rather than deleting `clone/`, use a separate > directory to clone into, say, `flaky/`. That will make it easier to debug > when the entire "trash" directory is tar'ed up in a failed CI build, for > example. > Done. > > diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh > > index e40e9ed52f..85d2a0e8b8 100755 > > --- a/t/t5551-http-fetch-smart.sh > > +++ b/t/t5551-http-fetch-smart.sh > > @@ -45,6 +45,7 @@ test_expect_success 'clone http repository' ' > > EOF > > GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION=0 \ > > git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && > > + cd clone && git config pull.rebase false && cd .. && > > Better: test_config -C clone pull.rebase false > Done, but also OBE by removing tests. > > I wonder whether it is really necessary to add _that_ many test cases. The > test suite already takes so long to run that we had cases where > contributors simply did not run it before sending their contributions. > > In this instance, I would think that it would be plenty sufficient to have > a single new test case that exercizes the added code path (and verifies > that it can see the message). > Done, down to a single test (clone) that should exercise everything. > Thanks, > Dscho > > > > > # DO NOT add non-httpd-specific tests here, because the last part of this > > # test script is only executed when httpd is available and enabled. > > -- > > 2.28.0.1011.ga647a8990f-goog > > > >
Sean McAllister <smcallis@google.com> writes: >> > +static int http_retry_limit = 3; >> > +static int http_default_delay = 2; >> >> Should there be a config option for that? Also, it took me some time to >> find the code using this variable in order to find out what unit to use: >> it is seconds (not microseconds, as I had expected). Maybe this can be >> documented in the variable name, or at least in a comment? > > Junio tossed that out during our private review and I think we decided to just Needs clarification. Here "that" in "tossed that out" only refers to "static int const http_retry_limit = 3" and friends and nothing else. There weren't any discussion on units or comments. I did mention that it is an obvious future possibility to make these configurable and that was why I suggested to "toss out" the const. It seems we'll see names with "seconds" in them somewhere, which is good. > I've been writing a lot of python code lately =D So splitting into > lines was a natural paradigm for me. You're right, I like yours more. I've > refactored it to be closer to that. Little bit of fiddling to deal with header > whitespace properly, but it's pretty close. Good. I personally think strbuf_split() is a mistaken API whose use needs to be killed, so it makes me happy to see one new callsite we didn't have to add ;-) Thanks.
diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index 3968fbb697..0beec3d370 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -260,6 +260,11 @@ http.followRedirects:: the base for the follow-up requests, this is generally sufficient. The default is `initial`. +http.retryLimit:: + Some HTTP error codes (eg: 429,503) can reasonably be retried if + they're encountered. This value configures the number of retry attempts + before giving up. The default retry limit is 3. + http.<url>.*:: Any of the http.* options above can be applied selectively to some URLs. For a config key to match a URL, each element of the config key is diff --git a/http.c b/http.c index b3c1669388..e41d7c5575 100644 --- a/http.c +++ b/http.c @@ -92,6 +92,9 @@ static const char *http_proxy_ssl_key; static const char *http_proxy_ssl_ca_info; static struct credential proxy_cert_auth = CREDENTIAL_INIT; static int proxy_ssl_cert_password_required; +static int http_retry_limit = 3; +static int http_default_delay = 2; +static int http_max_delay = 60; static struct { const char *name; @@ -219,6 +222,51 @@ size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf) return nmemb; } + +/* return 1 for a retryable HTTP code, 0 otherwise */ +static int retryable_code(int code) +{ + switch(code) { + case 429: /* fallthrough */ + case 502: /* fallthrough */ + case 503: /* fallthrough */ + case 504: return 1; + default: return 0; + } +} + +size_t http_header_value( + const struct strbuf headers, const char *header, char **value) +{ + size_t len = 0; + struct strbuf **lines, **line; + char *colon = NULL; + + lines = strbuf_split(&headers, '\n'); + for (line = lines; *line; line++) { + strbuf_trim(*line); + + /* find colon and null it out to 'split' string */ + colon = strchr((*line)->buf, ':'); + if (colon) { + *colon = '\0'; + + if (!strcasecmp(header, (*line)->buf)) { + /* move past colon and skip whitespace */ + colon++; + while (*colon && isspace(*colon)) colon++; + *value = xstrdup(colon); + len = strlen(*value); + goto done; + } + } + } + +done: + strbuf_list_free(lines); + return len; +} + static void closedown_active_slot(struct active_request_slot *slot) { active_requests--; @@ -452,6 +500,11 @@ static int http_options(const char *var, const char *value, void *cb) return 0; } + if (!strcmp("http.retrylimit", var)) { + http_retry_limit = git_config_int(var, value); + return 0; + } + /* Fall back on the default ones */ return git_default_config(var, value, cb); } @@ -1668,7 +1721,7 @@ static int handle_curl_result(struct slot_results *results) } int run_one_slot(struct active_request_slot *slot, - struct slot_results *results) + struct slot_results *results, int *http_code) { slot->results = results; if (!start_active_slot(slot)) { @@ -1678,6 +1731,8 @@ int run_one_slot(struct active_request_slot *slot, } run_active_slot(slot); + if (http_code) + *http_code = results->http_code; return handle_curl_result(results); } @@ -1903,20 +1958,55 @@ static void http_opt_request_remainder(CURL *curl, off_t pos) #define HTTP_REQUEST_STRBUF 0 #define HTTP_REQUEST_FILE 1 +/* check for a retry-after header in the given headers string, if found, then +honor it, otherwise do an exponential backoff up to the max on the current delay +*/ +static int http_retry_after(const struct strbuf headers, int cur_delay) { + int len, delay; + char *end; + char *value; + + len = http_header_value(headers, "retry-after", &value); + if (len) { + delay = strtol(value, &end, 0); + if (*value && *end == 0 && delay >= 0) { + if (delay > http_max_delay) { + die(Q_( + "server requested retry after %d second, which is longer than max allowed\n", + "server requested retry after %d seconds, which is longer than max allowed\n", delay), delay); + } + free(value); + return delay; + } + free(value); + } + + cur_delay *= 2; + return cur_delay >= http_max_delay ? http_max_delay : cur_delay; +} + static int http_request(const char *url, void *result, int target, const struct http_get_options *options) { struct active_request_slot *slot; struct slot_results results; - struct curl_slist *headers = http_copy_default_headers(); + struct curl_slist *headers; struct strbuf buf = STRBUF_INIT; + struct strbuf result_headers = STRBUF_INIT; const char *accept_language; int ret; + int retry_cnt = 0; + int retry_delay = http_default_delay; + int http_code; +retry: slot = get_active_slot(); curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1); + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, &result_headers); + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, fwrite_buffer); + if (result == NULL) { curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1); } else { @@ -1936,6 +2026,7 @@ static int http_request(const char *url, accept_language = get_accept_language(); + headers = http_copy_default_headers(); if (accept_language) headers = curl_slist_append(headers, accept_language); @@ -1961,7 +2052,31 @@ static int http_request(const char *url, curl_easy_setopt(slot->curl, CURLOPT_ENCODING, ""); curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0); - ret = run_one_slot(slot, &results); + http_code = 0; + ret = run_one_slot(slot, &results, &http_code); + + if (ret != HTTP_OK) { + if (retryable_code(http_code) && (retry_cnt < http_retry_limit)) { + retry_cnt++; + retry_delay = http_retry_after(result_headers, retry_delay); + fprintf(stderr, + Q_("got HTTP response %d, retrying after %d second (%d/%d)\n", + "got HTTP response %d, retrying after %d seconds (%d/%d)\n", + retry_delay), + http_code, retry_delay, retry_cnt, http_retry_limit); + sleep(retry_delay); + + // remove header data fields since not all slots will use them + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); + + goto retry; + } + } + + // remove header data fields since not all slots will use them + curl_easy_setopt(slot->curl, CURLOPT_HEADERDATA, NULL); + curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, NULL); if (options && options->content_type) { struct strbuf raw = STRBUF_INIT; diff --git a/http.h b/http.h index 5de792ef3f..60ce03801f 100644 --- a/http.h +++ b/http.h @@ -86,6 +86,17 @@ size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf); curlioerr ioctl_buffer(CURL *handle, int cmd, void *clientp); #endif +/* + * Query the value of an HTTP header. + * + * If the header is found, then a newly allocate string is returned through + * the value parameter, and the length is returned. + * + * If not found, returns 0 + */ +size_t http_header_value( + const struct strbuf headers, const char *header, char **value); + /* Slot lifecycle functions */ struct active_request_slot *get_active_slot(void); int start_active_slot(struct active_request_slot *slot); @@ -99,7 +110,7 @@ void finish_all_active_slots(void); * */ int run_one_slot(struct active_request_slot *slot, - struct slot_results *results); + struct slot_results *results, int *http_code); #ifdef USE_CURL_MULTI void fill_active_slots(void); diff --git a/remote-curl.c b/remote-curl.c index 7f44fa30fe..2657c95bcb 100644 --- a/remote-curl.c +++ b/remote-curl.c @@ -805,7 +805,7 @@ static int run_slot(struct active_request_slot *slot, if (!results) results = &results_buf; - err = run_one_slot(slot, results); + err = run_one_slot(slot, results, NULL); if (err != HTTP_OK && err != HTTP_REAUTH) { struct strbuf msg = STRBUF_INIT; diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 82aa99ae87..e09083e2b3 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -30,20 +30,39 @@ test_expect_success 'clone http repository' ' git clone --bare --no-local shallow "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && git clone $HTTPD_URL/smart/repo.git clone && ( - cd clone && - git fsck && - git log --format=%s origin/master >actual && - cat <<EOF >expect && -7 -6 -5 -4 -3 -EOF - test_cmp expect actual + cd clone && + git fsck && + git log --format=%s origin/master >actual && + cat <<-\EOF >expect && + 7 + 6 + 5 + 4 + 3 + EOF + test_cmp expect actual ) ' +test_expect_success 'clone http repository with flaky http' ' + rm -rf clone && + git clone $HTTPD_URL/error_ntime/`gen_nonce`/3/429/1/smart/repo.git clone 2>err && + ( + cd clone && + git fsck && + git log --format=%s origin/master >actual && + cat <<-\EOF >expect && + 7 + 6 + 5 + 4 + 3 + EOF + test_cmp expect actual + ) && + test_i18ngrep "got HTTP response 429" err +' + # This test is tricky. We need large enough "have"s that fetch-pack # will put pkt-flush in between. Then we need a "have" the server # does not have, it'll send "ACK %s ready" diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh index 450321fddb..d8234d555c 100755 --- a/t/t5540-http-push-webdav.sh +++ b/t/t5540-http-push-webdav.sh @@ -68,12 +68,36 @@ test_expect_success 'push already up-to-date' ' git push ' +test_expect_success 'push to remote repository with packed refs and flakey server' ' + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + rm -rf packed-refs && + git update-ref refs/heads/master $ORIG_HEAD && + git --bare update-server-info) && + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/test_repo.git && + git push && + git remote set-url origin $HTTPD_URL/dumb/test_repo.git && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + test $HEAD = $(git rev-parse --verify HEAD)) +' + test_expect_success 'push to remote repository with unpacked refs' ' (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && - rm packed-refs && + rm -rf packed-refs && + git update-ref refs/heads/master $ORIG_HEAD && + git --bare update-server-info) && + git push && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + test $HEAD = $(git rev-parse --verify HEAD)) +' + +test_expect_success 'push to remote repository with unpacked refs and flakey server' ' + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + rm -rf packed-refs && git update-ref refs/heads/master $ORIG_HEAD && git --bare update-server-info) && + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/test_repo.git && git push && + git remote set-url origin $HTTPD_URL/dumb/test_repo.git && (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && test $HEAD = $(git rev-parse --verify HEAD)) ' diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 187454f5dd..9b2fc62e11 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -77,6 +77,21 @@ test_expect_success 'push to remote repository (standard)' ' test $HEAD = $(git rev-parse --verify HEAD)) ' +test_expect_success 'push to remote repository (flakey server)' ' + cd "$ROOT_PATH"/test_repo_clone && + : >path5 && + git add path5 && + test_tick && + git commit -m path5 && + HEAD=$(git rev-parse --verify HEAD) && + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/smart/test_repo.git && + GIT_TRACE_CURL=true git push -v -v 2>err && + git remote set-url origin $HTTPD_URL/smart/test_repo.git && + grep "POST git-receive-pack ([0-9]* bytes)" err && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + test $HEAD = $(git rev-parse --verify HEAD)) +' + test_expect_success 'push already up-to-date' ' git push ' diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 483578b2d7..350c47097b 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -176,6 +176,18 @@ test_expect_success 'fetch changes via http' ' test_cmp file clone/file ' +test_expect_success 'fetch changes via flakey http' ' + echo content >>file && + git commit -a -m three && + git push public && + (cd clone && + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/dumb/repo.git && + git pull 2>../err && + git remote set-url origin $HTTPD_URL/dumb/repo.git) && + test_i18ngrep "got HTTP response 502" err && + test_cmp file clone/file +' + test_expect_success 'fetch changes via manual http-fetch' ' cp -R clone-tmpl clone2 && diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index e40e9ed52f..85d2a0e8b8 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -45,6 +45,7 @@ test_expect_success 'clone http repository' ' EOF GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION=0 \ git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && + cd clone && git config pull.rebase false && cd .. && test_cmp file clone/file && tr '\''\015'\'' Q <err | sed -e " @@ -103,6 +104,19 @@ test_expect_success 'fetch changes via http' ' test_cmp file clone/file ' +test_expect_success 'fetch changes via flakey http' ' + echo content >>file && + git commit -a -m two && + git push public && + (cd clone && + git remote set-url origin $HTTPD_URL/error_ntime/`gen_nonce`/3/502/1/smart/repo.git && + git pull 2>../err && + git remote set-url origin $HTTPD_URL/smart/repo.git) && + test_cmp file clone/file && + test_i18ngrep "got HTTP response 502" err +' + + test_expect_success 'used upload-pack service' ' cat >exp <<-\EOF && GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 71d4307001..9988e3ff14 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -757,13 +757,17 @@ test_expect_success 'partial clone using HTTP' ' ' test_expect_success 'partial clone using HTTP with redirect' ' - _NONCE=`gen_nonce` && export _NONCE && + _NONCE=`gen_nonce` && curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && curl "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" > /dev/null && partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/error_ntime/${_NONCE}/3/502/10/smart/server" ' +test_expect_success 'partial clone with retry' ' + partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/error_ntime/`gen_nonce`/3/429/1/smart/server" 2>err && + test_i18ngrep "got HTTP response 429" err +' # DO NOT add non-httpd-specific tests here, because the last part of this # test script is only executed when httpd is available and enabled.
Some HTTP response codes indicate a server state that can support retrying the request rather than immediately erroring out. The server can also provide information about how long to wait before retries to via the Retry-After header. So check the server response and retry some reasonable number of times before erroring out to better accomodate transient errors. Exiting immediately becomes irksome when pulling large multi-repo code bases such as Android or Chromium, as often the entire fetch operation has to be restarted from the beginning due to an error in one repo. If we can reduce how often that occurs, then it's a big win. Signed-off-by: Sean McAllister <smcallis@google.com> --- Documentation/config/http.txt | 5 ++ http.c | 121 +++++++++++++++++++++++++++++++++- http.h | 13 +++- remote-curl.c | 2 +- t/t5539-fetch-http-shallow.sh | 41 ++++++++---- t/t5540-http-push-webdav.sh | 26 +++++++- t/t5541-http-push-smart.sh | 15 +++++ t/t5550-http-fetch-dumb.sh | 12 ++++ t/t5551-http-fetch-smart.sh | 14 ++++ t/t5601-clone.sh | 6 +- 10 files changed, 237 insertions(+), 18 deletions(-)