@@ -375,6 +375,16 @@ Specifying `--no-force-if-includes` disables this behavior.
upstream (tracking) reference, used by argument-less
linkgit:git-pull[1] and other commands. For more information,
see `branch.<name>.merge` in linkgit:git-config[1].
++
+`-u` can also work with zero arguments( i.e. no `<repository>` and
+`<refspec>` are given). In that case, it tries to get the `<repository>`
+value from `branch.*.remote` configuration. If not found, it defaults to
+`origin`. If `remote.pushDefault` is set then it uses that instead. The
+value of `<refspec>` depends on the current `push.default` configuration.
+If `push.default` is set to `matching`, all remote branches to which
+local branches pushed, will be set as upstream of respective local
+branches. For all other values of `push.default`, current branch's
+refspec will be used as the `<refspec>`.
--[no-]thin::
These options are passed to linkgit:git-send-pack[1]. A thin transfer
@@ -202,11 +202,12 @@ static const char *get_upstream_ref(struct branch *branch, const char *remote_na
return branch->merge[0]->src;
}
-static void setup_default_push_refspecs(struct remote *remote)
+static void setup_default_push_refspecs(struct remote *remote, int flags)
{
struct branch *branch;
const char *dst;
int same_remote;
+ int is_default_u = (flags & TRANSPORT_PUSH_SET_UPSTREAM);
switch (push_default) {
case PUSH_DEFAULT_MATCHING:
@@ -214,6 +215,8 @@ static void setup_default_push_refspecs(struct remote *remote)
return;
case PUSH_DEFAULT_NOTHING:
+ if (is_default_u)
+ break;
die(_("You didn't specify any refspecs to push, and "
"push.default is \"nothing\"."));
return;
@@ -234,11 +237,15 @@ static void setup_default_push_refspecs(struct remote *remote)
case PUSH_DEFAULT_SIMPLE:
if (!same_remote)
break;
+ if (is_default_u)
+ break;
if (strcmp(branch->refname, get_upstream_ref(branch, remote->name)))
die_push_simple(branch, remote);
break;
case PUSH_DEFAULT_UPSTREAM:
+ if (is_default_u)
+ break;
if (!same_remote)
die(_("You are pushing to remote '%s', which is not the upstream of\n"
"your current branch '%s', without telling me what to push\n"
@@ -401,7 +408,7 @@ static int do_push(int flags,
if (remote->push.nr) {
push_refspec = &remote->push;
} else if (!(flags & TRANSPORT_PUSH_MIRROR))
- setup_default_push_refspecs(remote);
+ setup_default_push_refspecs(remote, flags);
}
errs = 0;
url_nr = push_url_of_remote(remote, &url);
@@ -60,6 +60,48 @@ test_expect_success 'push -u :topic_2' '
check_config topic_2 upstream refs/heads/other2
'
+default_u_setup() {
+ git checkout main &&
+ test_might_fail git branch --unset-upstream &&
+ test_config push.default $1 &&
+ test_config remote.pushDefault upstream
+}
+
+for i in simple current upstream nothing
+do
+ test_expect_success 'push -u with push.default=$i' '
+ default_u_setup $i &&
+ git push -u &&
+ check_config main upstream refs/heads/main &&
+ git push -u upstream main:other &&
+ git push -u &&
+ check_config main upstream refs/heads/main
+ '
+done
+
+check_empty_config() {
+ test_expect_code 1 git config "branch.$1.remote" &&
+ test_expect_code 1 git config "branch.$1.merge"
+}
+
+test_expect_success 'push -u with push.default=matching' '
+ default_u_setup matching &&
+ git branch test_u &&
+ git branch test_u2 &&
+ git push upstream main:test_u2 &&
+ git push -u &&
+ check_config main upstream refs/heads/main &&
+ check_config test_u2 upstream refs/heads/test_u2 &&
+ check_empty_config test_u
+'
+
+test_expect_success 'push -u --dry-run' '
+ git checkout main &&
+ git push -u upstream main:other &&
+ git push -u --dry-run &&
+ check_config main upstream refs/heads/other
+'
+
test_expect_success 'push -u --all' '
git branch all1 &&
git branch all2 &&
@@ -81,6 +123,13 @@ test_expect_success TTY 'progress messages go to tty' '
test_i18ngrep "Writing objects" err
'
+test_expect_success TTY 'progress messages go to tty with default -u' '
+ ensure_fresh_upstream &&
+
+ test_terminal git push -u 2>err &&
+ test_i18ngrep "Writing objects" err
+'
+
test_expect_success 'progress messages do not go to non-tty' '
ensure_fresh_upstream &&
@@ -89,6 +138,14 @@ test_expect_success 'progress messages do not go to non-tty' '
test_i18ngrep ! "Writing objects" err
'
+test_expect_success 'progress messages do not go to non-tty (default -u)' '
+ ensure_fresh_upstream &&
+
+ # skip progress messages, since stderr is non-tty
+ git push -u 2>err &&
+ test_i18ngrep ! "Writing objects" err
+'
+
test_expect_success 'progress messages go to non-tty (forced)' '
ensure_fresh_upstream &&
@@ -97,6 +154,14 @@ test_expect_success 'progress messages go to non-tty (forced)' '
test_i18ngrep "Writing objects" err
'
+test_expect_success 'progress messages go to non-tty with default -u (forced)' '
+ ensure_fresh_upstream &&
+
+ # force progress messages to stderr, even though it is non-tty
+ git push -u --progress 2>err &&
+ test_i18ngrep "Writing objects" err
+'
+
test_expect_success TTY 'push -q suppresses progress' '
ensure_fresh_upstream &&
@@ -104,6 +169,13 @@ test_expect_success TTY 'push -q suppresses progress' '
test_i18ngrep ! "Writing objects" err
'
+test_expect_success TTY 'push -q suppresses progress (with default -u)' '
+ ensure_fresh_upstream &&
+
+ test_terminal git push -u -q 2>err &&
+ test_i18ngrep ! "Writing objects" err
+'
+
test_expect_success TTY 'push --no-progress suppresses progress' '
ensure_fresh_upstream &&
@@ -112,6 +184,14 @@ test_expect_success TTY 'push --no-progress suppresses progress' '
test_i18ngrep ! "Writing objects" err
'
+test_expect_success TTY 'push --no-progress suppresses progress (default -u)' '
+ ensure_fresh_upstream &&
+
+ test_terminal git push -u --no-progress 2>err &&
+ test_i18ngrep ! "Unpacking objects" err &&
+ test_i18ngrep ! "Writing objects" err
+'
+
test_expect_success TTY 'quiet push' '
ensure_fresh_upstream &&
@@ -126,4 +206,11 @@ test_expect_success TTY 'quiet push -u' '
test_must_be_empty output
'
+test_expect_success TTY 'quiet push -u (default -u)' '
+ ensure_fresh_upstream &&
+
+ test_terminal git push --quiet -u --no-progress 2>&1 | tee output &&
+ test_must_be_empty output
+'
+
test_done
"git push -u" (set-upstream) requires where to push to and what to push. Often people push only the current branch to update the branch of the same name at the 'origin' repository. For them, it would be convenient if "git push -u" without repository or refspec, defaulted to push and set upstream to the branch as configured by the "push.default" setting, of the remote repository that is used by default. Teach "git push -u" not to require repository and refspec. When the user do not give what repository to push to, or which branch(es) to push, behave as if the default remote repository and a refspec (depending on the "push.default" configuration) are given. If "push.default"=matching, push all the branches matched on both remote and local side and set those remote branches as the upstream of their respective local matched branches. Otherwise, set the refspec to the refspec for current branch. Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com> --- Documentation/git-push.txt | 10 +++++ builtin/push.c | 11 ++++- t/t5523-push-upstream.sh | 87 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 106 insertions(+), 2 deletions(-)