[GSoC] t7611: replace test -f with test_path_is* helpers

Commit Message

Meet Soni Dec. 18, 2024, 11:17 a.m. UTC

test -f does not provide verbose error message on test failures, so use
test_path_is_file, test_path_is_missing instead.

Signed-off-by: Meet Soni <[e-mail]>
---
 t/t7611-merge-abort.sh | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)


base-commit: d882f382b3d939d90cfa58d17b17802338f05d66

Comments

Karthik Nayak Dec. 18, 2024, 3:23 p.m. UTC | #1

Meet Soni <[e-mail]> writes:

> test -f does not provide verbose error message on test failures, so use
> test_path_is_file, test_path_is_missing instead.

While `test -f` checks to ensure that the file exists and is a regular
file, I also notice that the patch contains changing `test ! -f`. This
is a bit more tricky, since:
1. It can be used to check if a regular file doesn't exist
2. It can be used to check if a directory exists instead of a file

The commit message only talks about the former.

The patch itself look great, but I just noticed that the subject
mentions 'GSoC'. As Patrick has already mentioned in your previous email
to the list [1], we still don't have any plans with regards to GSoC 25.
So marking a patch in that context, doesn't make much sense (yet).

[1]: https://lore.kernel.org/git/[e-mail]/

[snip]

Patch

diff --git a/t/t7611-merge-abort.sh b/t/t7611-merge-abort.sh
index d6975ca48d..1a251485e1 100755
--- a/t/t7611-merge-abort.sh
+++ b/t/t7611-merge-abort.sh
@@ -54,13 +54,13 @@  test_expect_success 'fails without MERGE_HEAD (unstarted merge)' '
 '
 
 test_expect_success 'fails without MERGE_HEAD (unstarted merge): .git/MERGE_HEAD sanity' '
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)"
 '
 
 test_expect_success 'fails without MERGE_HEAD (completed merge)' '
 	git merge clean_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	# Merge successfully completed
 	post_merge_head="$(git rev-parse HEAD)" &&
 	test_must_fail git merge --abort 2>output &&
@@ -68,7 +68,7 @@  test_expect_success 'fails without MERGE_HEAD (completed merge)' '
 '
 
 test_expect_success 'fails without MERGE_HEAD (completed merge): .git/MERGE_HEAD sanity' '
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$post_merge_head" = "$(git rev-parse HEAD)"
 '
 
@@ -79,10 +79,10 @@  test_expect_success 'Forget previous merge' '
 test_expect_success 'Abort after --no-commit' '
 	# Redo merge, but stop before creating merge commit
 	git merge --no-commit clean_branch &&
-	test -f .git/MERGE_HEAD &&
+	test_path_is_file .git/MERGE_HEAD &&
 	# Abort non-conflicting merge
 	git merge --abort &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff)" &&
 	test -z "$(git diff --staged)"
@@ -91,10 +91,10 @@  test_expect_success 'Abort after --no-commit' '
 test_expect_success 'Abort after conflicts' '
 	# Create conflicting merge
 	test_must_fail git merge conflict_branch &&
-	test -f .git/MERGE_HEAD &&
+	test_path_is_file .git/MERGE_HEAD &&
 	# Abort conflicting merge
 	git merge --abort &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff)" &&
 	test -z "$(git diff --staged)"
@@ -105,7 +105,7 @@  test_expect_success 'Clean merge with dirty index fails' '
 	git add foo &&
 	git diff --staged > expect &&
 	test_must_fail git merge clean_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff)" &&
 	git diff --staged > actual &&
@@ -114,7 +114,7 @@  test_expect_success 'Clean merge with dirty index fails' '
 
 test_expect_success 'Conflicting merge with dirty index fails' '
 	test_must_fail git merge conflict_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff)" &&
 	git diff --staged > actual &&
@@ -129,10 +129,10 @@  test_expect_success 'Reset index (but preserve worktree changes)' '
 
 test_expect_success 'Abort clean merge with non-conflicting dirty worktree' '
 	git merge --no-commit clean_branch &&
-	test -f .git/MERGE_HEAD &&
+	test_path_is_file .git/MERGE_HEAD &&
 	# Abort merge
 	git merge --abort &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&
@@ -141,10 +141,10 @@  test_expect_success 'Abort clean merge with non-conflicting dirty worktree' '
 
 test_expect_success 'Abort conflicting merge with non-conflicting dirty worktree' '
 	test_must_fail git merge conflict_branch &&
-	test -f .git/MERGE_HEAD &&
+	test_path_is_file .git/MERGE_HEAD &&
 	# Abort merge
 	git merge --abort &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&
@@ -159,7 +159,7 @@  test_expect_success 'Fail clean merge with conflicting dirty worktree' '
 	echo xyzzy >> bar &&
 	git diff > expect &&
 	test_must_fail git merge --no-commit clean_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&
@@ -168,7 +168,7 @@  test_expect_success 'Fail clean merge with conflicting dirty worktree' '
 
 test_expect_success 'Fail conflicting merge with conflicting dirty worktree' '
 	test_must_fail git merge conflict_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&
@@ -183,7 +183,7 @@  test_expect_success 'Fail clean merge with matching dirty worktree' '
 	echo bart > bar &&
 	git diff > expect &&
 	test_must_fail git merge --no-commit clean_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&
@@ -194,7 +194,7 @@  test_expect_success 'Fail conflicting merge with matching dirty worktree' '
 	echo barf > bar &&
 	git diff > expect &&
 	test_must_fail git merge conflict_branch &&
-	test ! -f .git/MERGE_HEAD &&
+	test_path_is_missing .git/MERGE_HEAD &&
 	test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
 	test -z "$(git diff --staged)" &&
 	git diff > actual &&