| Message ID | 5933a302b581670183a6f3c881f62e96f61ff192.1712642313.git.ps@pks.im (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | pack-bitmap: gracefully handle missing BTMP chunks | expand |
On Tue, Apr 09, 2024 at 07:59:25AM +0200, Patrick Steinhardt wrote: > One thing that we glossed over though is backwards compatibility with > repositories that do not yet have BTMP chunks in their multi-pack index. > In that case, `nth_bitmapped_pack()` would return an error, which causes > us to emit a warning followed by another error message. These warnings > are visible to users that fetch from a repository: > > ``` > $ git fetch > ... > remote: error: MIDX does not contain the BTMP chunk > remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse > remote: Enumerating objects: 40, done. > remote: Counting objects: 100% (40/40), done. > remote: Compressing objects: 100% (39/39), done. > remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0) > ... > ``` Nice catch. This is definitely an oversight from my original series, which should not disrupt single-pack reuse from the MIDX's preferred pack when using a MIDX/bitmap written prior to the introduction of the BTMP chunk. > Fix this issue by partially reverting the logic back to what we had > before this patch series landed. Namely, in the case where we have no > BTMP chunks or when `pack.allowPackReuse=single` are set, we use the > preferred pack instead of consulting the BTMP chunks. I think that the approach here makes sense to me. The gist is: - If we don't have a BTMP chunk, then only reuse objects from the preferred pack. - Otherwise, we do have a BTMP chunk (or we're not doing multi-pack reuse). If we are reusing objects from multiple packs, then do the usual MIDX reuse routines. - Otherwise, we're doing single-pack reuse. In that case, only reuse objects from the preferred pack. > diff --git a/midx.c b/midx.c > index 41521e019c..6903e9dfd2 100644 > --- a/midx.c > +++ b/midx.c > @@ -1661,9 +1661,10 @@ static int write_midx_internal(const char *object_dir, > add_chunk(cf, MIDX_CHUNKID_REVINDEX, > st_mult(ctx.entries_nr, sizeof(uint32_t)), > write_midx_revindex); > - add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, > - bitmapped_packs_concat_len, > - write_midx_bitmapped_packs); > + if (git_env_bool("GIT_TEST_MIDX_WRITE_BTMP", 1)) > + add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, > + bitmapped_packs_concat_len, > + write_midx_bitmapped_packs); I wish that this were possible to exercise without a new GIT_TEST_-variable. I think there are a couple of alternatives: You could introduce a new GIT_TEST_MIDX_READ_BTMP variable, and then set that to control whether or not we read the BTMP chunk. This is what we did in: - 28cd730680d (pack-bitmap: prepare to read lookup table extension, 2022-08-14), as well as in - 7f514b7a5e7 (midx: read `RIDX` chunk when present, 2022-01-25) . I have a vague preference towards controlling whether or not we read the BTMP chunk (as opposed to whether or not we write it) as this removes a potential footgun for users who might accidentally disable writing a BTMP chunk (in which case you have to rewrite the whole MIDX) as opposed to reading it (in which case you just change your environment variable). Of course, that is still using a GIT_TEST_-variable, which is less than ideal IMHO. The other alternative would be to store a MIDX file as a test fixture in the tree (which we do in a couple of places). But with the recent xz shenanigans, I'm not sure that's a great idea either ;-). > diff --git a/pack-bitmap.c b/pack-bitmap.c > index 2baeabacee..f286805724 100644 > --- a/pack-bitmap.c > +++ b/pack-bitmap.c > @@ -2049,7 +2049,25 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, > > load_reverse_index(r, bitmap_git); > > - if (bitmap_is_midx(bitmap_git)) { > + if (bitmap_is_midx(bitmap_git) && > + (!multi_pack_reuse || !bitmap_git->midx->chunk_bitmapped_packs)) { > + uint32_t preferred_pack_pos; > + struct packed_git *pack; > + > + if (midx_preferred_pack(bitmap_git->midx, &preferred_pack_pos) < 0) { > + warning(_("unable to compute preferred pack, disabling pack-reuse")); > + return; > + } > + > + pack = bitmap_git->midx->packs[preferred_pack_pos]; > + > + ALLOC_GROW(packs, packs_nr + 1, packs_alloc); > + packs[packs_nr].p = pack; > + packs[packs_nr].bitmap_nr = pack->num_objects; > + packs[packs_nr].bitmap_pos = 0; > + > + objects_nr = packs[packs_nr++].bitmap_nr; > + } else if (bitmap_is_midx(bitmap_git)) { > for (i = 0; i < bitmap_git->midx->num_packs; i++) { > struct bitmapped_pack pack; > if (nth_bitmapped_pack(r, bitmap_git->midx, &pack, i) < 0) { This all makes sense to me. I think we could make the result slightly more readable by handling the case where we're doing multi-pack reuse separately from the case where we're not. I tried to make that change locally to see if it was a good idea, and I'm reasonably happy with the result. I can't think of a great way to talk about it without just showing the resulting patch (as the inter-diff is fairly difficult to read IMHO). So here is the resulting patch (forging your s-o-b): --- 8< --- Subject: [PATCH] pack-bitmap: gracefully handle missing BTMP chunks In 0fea6b73f1 (Merge branch 'tb/multi-pack-verbatim-reuse', 2024-01-12) we have introduced multi-pack verbatim reuse of objects. This series has introduced a new BTMP chunk, which encodes information about bitmapped objects in the multi-pack index. Starting with dab60934e3 (pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions, 2023-12-14) we use this information to figure out objects which we can reuse from each of the packfiles. One thing that we glossed over though is backwards compatibility with repositories that do not yet have BTMP chunks in their multi-pack index. In that case, `nth_bitmapped_pack()` would return an error, which causes us to emit a warning followed by another error message. These warnings are visible to users that fetch from a repository: ``` $ git fetch ... remote: error: MIDX does not contain the BTMP chunk remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse remote: Enumerating objects: 40, done. remote: Counting objects: 100% (40/40), done. remote: Compressing objects: 100% (39/39), done. remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0) ... ``` While the fetch succeeds the user is left wondering what they did wrong. Furthermore, as visible both from the warning and from the reuse stats, pack-reuse is completely disabled in such repositories. What is quite interesting is that this issue can even be triggered in case `pack.allowPackReuse=single` is set, which is the default value. One could have expected that in this case we fall back to the old logic, which is to use the preferred packfile without consulting BTMP chunks at all. But either we fail with the above error in case they are missing, or we use the first pack in the multi-pack-index. The former case disables pack-reuse altogether, whereas the latter case may result in reusing objects from a suboptimal packfile. Fix this issue by partially reverting the logic back to what we had before this patch series landed. Namely, in the case where we have no BTMP chunks or when `pack.allowPackReuse=single` are set, we use the preferred pack instead of consulting the BTMP chunks. Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Taylor Blau <me@ttaylorr.com> --- midx.c | 7 +++--- pack-bitmap.c | 44 +++++++++++++++++++---------------- t/t5326-multi-pack-bitmaps.sh | 22 ++++++++++++++++++ 3 files changed, 50 insertions(+), 23 deletions(-) diff --git a/midx.c b/midx.c index 41521e019c6..6903e9dfd25 100644 --- a/midx.c +++ b/midx.c @@ -1661,9 +1661,10 @@ static int write_midx_internal(const char *object_dir, add_chunk(cf, MIDX_CHUNKID_REVINDEX, st_mult(ctx.entries_nr, sizeof(uint32_t)), write_midx_revindex); - add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, - bitmapped_packs_concat_len, - write_midx_bitmapped_packs); + if (git_env_bool("GIT_TEST_MIDX_WRITE_BTMP", 1)) + add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, + bitmapped_packs_concat_len, + write_midx_bitmapped_packs); } write_midx_header(f, get_num_chunks(cf), ctx.nr - dropped_packs); diff --git a/pack-bitmap.c b/pack-bitmap.c index 2baeabacee1..44b32ee3561 100644 --- a/pack-bitmap.c +++ b/pack-bitmap.c @@ -2049,7 +2049,14 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, load_reverse_index(r, bitmap_git); - if (bitmap_is_midx(bitmap_git)) { + if (!bitmap_is_midx(bitmap_git) || + !bitmap_git->midx->chunk_bitmapped_packs) + multi_pack_reuse = 0; + + if (multi_pack_reuse) { + if (!bitmap_is_midx(bitmap_git)) + BUG("attempting to perform multi-pack reuse on non-MIDX bitmap"); + for (i = 0; i < bitmap_git->midx->num_packs; i++) { struct bitmapped_pack pack; if (nth_bitmapped_pack(r, bitmap_git->midx, &pack, i) < 0) { @@ -2062,36 +2069,33 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, if (!pack.bitmap_nr) continue; - if (!multi_pack_reuse && pack.bitmap_pos) { - /* - * If we're only reusing a single pack, skip - * over any packs which are not positioned at - * the beginning of the MIDX bitmap. - * - * This is consistent with the existing - * single-pack reuse behavior, which only reuses - * parts of the MIDX's preferred pack. - */ - continue; - } - ALLOC_GROW(packs, packs_nr + 1, packs_alloc); memcpy(&packs[packs_nr++], &pack, sizeof(pack)); objects_nr += pack.p->num_objects; - - if (!multi_pack_reuse) - break; } QSORT(packs, packs_nr, bitmapped_pack_cmp); } else { + struct packed_git *pack; + if (bitmap_is_midx(bitmap_git)) { + uint32_t pack_int_id; + if (midx_preferred_pack(bitmap_git->midx, &pack_int_id) < 0) { + warning(_("unable to compute preferred pack, " + "disabling pack-reuse")); + return; + } + + pack = bitmap_git->midx->packs[pack_int_id]; + } else { + pack = bitmap_git->pack; + } + ALLOC_GROW(packs, packs_nr + 1, packs_alloc); - packs[packs_nr].p = bitmap_git->pack; - packs[packs_nr].bitmap_nr = bitmap_git->pack->num_objects; + packs[packs_nr].p = pack; + packs[packs_nr].bitmap_nr = pack->num_objects; packs[packs_nr].bitmap_pos = 0; - objects_nr = packs[packs_nr++].bitmap_nr; } diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh index 70d1b58709a..ee3843b2390 100755 --- a/t/t5326-multi-pack-bitmaps.sh +++ b/t/t5326-multi-pack-bitmaps.sh @@ -513,4 +513,26 @@ test_expect_success 'corrupt MIDX with bitmap causes fallback' ' ) ' +for allow_pack_reuse in single multi +do + test_expect_success "MIDX without BTMP chunk does not complain with $allow_pack_reuse pack reuse" ' + test_when_finished "rm -rf midx-without-btmp" && + git init midx-without-btmp && + ( + cd midx-without-btmp && + test_commit initial && + + # Write a multi-pack index that does have a bitmap, but + # no BTMP chunk. Such MIDX files would not be generated + # by modern Git anymore, but they were generated by + # older Git versions. + GIT_TEST_MIDX_WRITE_BTMP=false \ + git repack -Adbl --write-bitmap-index --write-midx && + git -c pack.allowPackReuse=$allow_pack_reuse \ + pack-objects --all --use-bitmap-index --stdout </dev/null >/dev/null 2>err && + test_must_be_empty err + ) + ' +done + test_done base-commit: 91ec36f2cca02d33ab0ed6e87195c6fe801debae -- 2.44.0.549.g74a2f60dcb0 --- >8 --- The way I would structure this series is to first apply the portion of the above patch *without* these lines: - if (bitmap_is_midx(bitmap_git)) { + if (!bitmap_is_midx(bitmap_git) || + !bitmap_git->midx->chunk_bitmapped_packs) + multi_pack_reuse = 0; + , so we're still able to reproduce the issue. Then, apply the remaining portions (the above diff, the test, and the GIT_TEST_MIDX_WRITE_BTMP stuff) to demonstrate that the issue is fixed via a separate commit. I'm happy to write that up, and equally happy to not do it ;-). Sorry for the lengthy review, but thank you very much for spotting and fixing this issue. Thanks, Taylor
On Wed, Apr 10, 2024 at 11:02:10AM -0400, Taylor Blau wrote: > On Tue, Apr 09, 2024 at 07:59:25AM +0200, Patrick Steinhardt wrote: [snip] > > diff --git a/midx.c b/midx.c > > index 41521e019c..6903e9dfd2 100644 > > --- a/midx.c > > +++ b/midx.c > > @@ -1661,9 +1661,10 @@ static int write_midx_internal(const char *object_dir, > > add_chunk(cf, MIDX_CHUNKID_REVINDEX, > > st_mult(ctx.entries_nr, sizeof(uint32_t)), > > write_midx_revindex); > > - add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, > > - bitmapped_packs_concat_len, > > - write_midx_bitmapped_packs); > > + if (git_env_bool("GIT_TEST_MIDX_WRITE_BTMP", 1)) > > + add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, > > + bitmapped_packs_concat_len, > > + write_midx_bitmapped_packs); > > I wish that this were possible to exercise without a new > GIT_TEST_-variable. I think there are a couple of alternatives: > > You could introduce a new GIT_TEST_MIDX_READ_BTMP variable, and then set > that to control whether or not we read the BTMP chunk. This is what we > did in: > > - 28cd730680d (pack-bitmap: prepare to read lookup table extension, > 2022-08-14), as well as in > > - 7f514b7a5e7 (midx: read `RIDX` chunk when present, 2022-01-25) > > . I have a vague preference towards controlling whether or not we read > the BTMP chunk (as opposed to whether or not we write it) as this > removes a potential footgun for users who might accidentally disable > writing a BTMP chunk (in which case you have to rewrite the whole MIDX) > as opposed to reading it (in which case you just change your environment > variable). > > Of course, that is still using a GIT_TEST_-variable, which is less than > ideal IMHO. The other alternative would be to store a MIDX file as a > test fixture in the tree (which we do in a couple of places). But with > the recent xz shenanigans, I'm not sure that's a great idea either ;-). I'm happy to convert this to use `GIT_TEST_MIDX_READ_BTMP` instead. > > diff --git a/pack-bitmap.c b/pack-bitmap.c > > index 2baeabacee..f286805724 100644 > > --- a/pack-bitmap.c > > +++ b/pack-bitmap.c > > @@ -2049,7 +2049,25 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, > > > > load_reverse_index(r, bitmap_git); > > > > - if (bitmap_is_midx(bitmap_git)) { > > + if (bitmap_is_midx(bitmap_git) && > > + (!multi_pack_reuse || !bitmap_git->midx->chunk_bitmapped_packs)) { > > + uint32_t preferred_pack_pos; > > + struct packed_git *pack; > > + > > + if (midx_preferred_pack(bitmap_git->midx, &preferred_pack_pos) < 0) { > > + warning(_("unable to compute preferred pack, disabling pack-reuse")); > > + return; > > + } > > + > > + pack = bitmap_git->midx->packs[preferred_pack_pos]; > > + > > + ALLOC_GROW(packs, packs_nr + 1, packs_alloc); > > + packs[packs_nr].p = pack; > > + packs[packs_nr].bitmap_nr = pack->num_objects; > > + packs[packs_nr].bitmap_pos = 0; > > + > > + objects_nr = packs[packs_nr++].bitmap_nr; > > + } else if (bitmap_is_midx(bitmap_git)) { > > for (i = 0; i < bitmap_git->midx->num_packs; i++) { > > struct bitmapped_pack pack; > > if (nth_bitmapped_pack(r, bitmap_git->midx, &pack, i) < 0) { > > This all makes sense to me. I think we could make the result slightly > more readable by handling the case where we're doing multi-pack reuse > separately from the case where we're not. > > I tried to make that change locally to see if it was a good idea, and > I'm reasonably happy with the result. I can't think of a great way to > talk about it without just showing the resulting patch (as the > inter-diff is fairly difficult to read IMHO). So here is the resulting > patch (forging your s-o-b): Yup, the result indeed looks nicer, thanks! [snip] > The way I would structure this series is to first apply the portion of > the above patch *without* these lines: > > - if (bitmap_is_midx(bitmap_git)) { > + if (!bitmap_is_midx(bitmap_git) || > + !bitmap_git->midx->chunk_bitmapped_packs) > + multi_pack_reuse = 0; > + > > , so we're still able to reproduce the issue. Then, apply the remaining > portions (the above diff, the test, and the GIT_TEST_MIDX_WRITE_BTMP > stuff) to demonstrate that the issue is fixed via a separate commit. > > I'm happy to write that up, and equally happy to not do it ;-). Sorry > for the lengthy review, but thank you very much for spotting and fixing > this issue. I'd prefer to leave it as a single patch. Junio has expressed at times that he doesn't see much value in these splits only to demonstrate a broken test. An interested reader can easily revert the fix and see that the test would fail. Patrick
On Mon, Apr 15, 2024 at 08:34:33AM +0200, Patrick Steinhardt wrote: > > Of course, that is still using a GIT_TEST_-variable, which is less than > > ideal IMHO. The other alternative would be to store a MIDX file as a > > test fixture in the tree (which we do in a couple of places). But with > > the recent xz shenanigans, I'm not sure that's a great idea either ;-). > > I'm happy to convert this to use `GIT_TEST_MIDX_READ_BTMP` instead. Thanks, I think that is definitely an improvement. > > The way I would structure this series is to first apply the portion of > > the above patch *without* these lines: > > > > - if (bitmap_is_midx(bitmap_git)) { > > + if (!bitmap_is_midx(bitmap_git) || > > + !bitmap_git->midx->chunk_bitmapped_packs) > > + multi_pack_reuse = 0; > > + > > > > , so we're still able to reproduce the issue. Then, apply the remaining > > portions (the above diff, the test, and the GIT_TEST_MIDX_WRITE_BTMP > > stuff) to demonstrate that the issue is fixed via a separate commit. > > > > I'm happy to write that up, and equally happy to not do it ;-). Sorry > > for the lengthy review, but thank you very much for spotting and fixing > > this issue. > > I'd prefer to leave it as a single patch. Junio has expressed at times > that he doesn't see much value in these splits only to demonstrate a > broken test. An interested reader can easily revert the fix and see that > the test would fail. Yeah, to be clear, I wasn't suggesting adding a test_expect_failure here. I was suggesting instead that you do a refactoring that doesn't change the behavior in the first step, and then add the test plus the fix (after it is made easier to land by the first step) in the second step. But I don't feel strongly about it whatsoever, so I think that the new version you have here is fine. I'll take a closer look at it right now... Thanks, Taylor
diff --git a/midx.c b/midx.c index 41521e019c..6903e9dfd2 100644 --- a/midx.c +++ b/midx.c @@ -1661,9 +1661,10 @@ static int write_midx_internal(const char *object_dir, add_chunk(cf, MIDX_CHUNKID_REVINDEX, st_mult(ctx.entries_nr, sizeof(uint32_t)), write_midx_revindex); - add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, - bitmapped_packs_concat_len, - write_midx_bitmapped_packs); + if (git_env_bool("GIT_TEST_MIDX_WRITE_BTMP", 1)) + add_chunk(cf, MIDX_CHUNKID_BITMAPPEDPACKS, + bitmapped_packs_concat_len, + write_midx_bitmapped_packs); } write_midx_header(f, get_num_chunks(cf), ctx.nr - dropped_packs); diff --git a/pack-bitmap.c b/pack-bitmap.c index 2baeabacee..f286805724 100644 --- a/pack-bitmap.c +++ b/pack-bitmap.c @@ -2049,7 +2049,25 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, load_reverse_index(r, bitmap_git); - if (bitmap_is_midx(bitmap_git)) { + if (bitmap_is_midx(bitmap_git) && + (!multi_pack_reuse || !bitmap_git->midx->chunk_bitmapped_packs)) { + uint32_t preferred_pack_pos; + struct packed_git *pack; + + if (midx_preferred_pack(bitmap_git->midx, &preferred_pack_pos) < 0) { + warning(_("unable to compute preferred pack, disabling pack-reuse")); + return; + } + + pack = bitmap_git->midx->packs[preferred_pack_pos]; + + ALLOC_GROW(packs, packs_nr + 1, packs_alloc); + packs[packs_nr].p = pack; + packs[packs_nr].bitmap_nr = pack->num_objects; + packs[packs_nr].bitmap_pos = 0; + + objects_nr = packs[packs_nr++].bitmap_nr; + } else if (bitmap_is_midx(bitmap_git)) { for (i = 0; i < bitmap_git->midx->num_packs; i++) { struct bitmapped_pack pack; if (nth_bitmapped_pack(r, bitmap_git->midx, &pack, i) < 0) { @@ -2062,26 +2080,10 @@ void reuse_partial_packfile_from_bitmap(struct bitmap_index *bitmap_git, if (!pack.bitmap_nr) continue; - if (!multi_pack_reuse && pack.bitmap_pos) { - /* - * If we're only reusing a single pack, skip - * over any packs which are not positioned at - * the beginning of the MIDX bitmap. - * - * This is consistent with the existing - * single-pack reuse behavior, which only reuses - * parts of the MIDX's preferred pack. - */ - continue; - } - ALLOC_GROW(packs, packs_nr + 1, packs_alloc); memcpy(&packs[packs_nr++], &pack, sizeof(pack)); objects_nr += pack.p->num_objects; - - if (!multi_pack_reuse) - break; } QSORT(packs, packs_nr, bitmapped_pack_cmp); diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh index 70d1b58709..ee3843b239 100755 --- a/t/t5326-multi-pack-bitmaps.sh +++ b/t/t5326-multi-pack-bitmaps.sh @@ -513,4 +513,26 @@ test_expect_success 'corrupt MIDX with bitmap causes fallback' ' ) ' +for allow_pack_reuse in single multi +do + test_expect_success "MIDX without BTMP chunk does not complain with $allow_pack_reuse pack reuse" ' + test_when_finished "rm -rf midx-without-btmp" && + git init midx-without-btmp && + ( + cd midx-without-btmp && + test_commit initial && + + # Write a multi-pack index that does have a bitmap, but + # no BTMP chunk. Such MIDX files would not be generated + # by modern Git anymore, but they were generated by + # older Git versions. + GIT_TEST_MIDX_WRITE_BTMP=false \ + git repack -Adbl --write-bitmap-index --write-midx && + git -c pack.allowPackReuse=$allow_pack_reuse \ + pack-objects --all --use-bitmap-index --stdout </dev/null >/dev/null 2>err && + test_must_be_empty err + ) + ' +done + test_done
In 0fea6b73f1 (Merge branch 'tb/multi-pack-verbatim-reuse', 2024-01-12) we have introduced multi-pack verbatim reuse of objects. This series has introduced a new BTMP chunk, which encodes information about bitmapped objects in the multi-pack index. Starting with dab60934e3 (pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions, 2023-12-14) we use this information to figure out objects which we can reuse from each of the packfiles. One thing that we glossed over though is backwards compatibility with repositories that do not yet have BTMP chunks in their multi-pack index. In that case, `nth_bitmapped_pack()` would return an error, which causes us to emit a warning followed by another error message. These warnings are visible to users that fetch from a repository: ``` $ git fetch ... remote: error: MIDX does not contain the BTMP chunk remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse remote: Enumerating objects: 40, done. remote: Counting objects: 100% (40/40), done. remote: Compressing objects: 100% (39/39), done. remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0) ... ``` While the fetch succeeds the user is left wondering what they did wrong. Furthermore, as visible both from the warning and from the reuse stats, pack-reuse is completely disabled in such repositories. What is quite interesting is that this issue can even be triggered in case `pack.allowPackReuse=single` is set, which is the default value. One could have expected that in this case we fall back to the old logic, which is to use the preferred packfile without consulting BTMP chunks at all. But either we fail with the above error in case they are missing, or we use the first pack in the multi-pack-index. The former case disables pack-reuse altogether, whereas the latter case may result in reusing objects from a suboptimal packfile. Fix this issue by partially reverting the logic back to what we had before this patch series landed. Namely, in the case where we have no BTMP chunks or when `pack.allowPackReuse=single` are set, we use the preferred pack instead of consulting the BTMP chunks. Signed-off-by: Patrick Steinhardt <ps@pks.im> --- midx.c | 7 ++++--- pack-bitmap.c | 36 ++++++++++++++++++----------------- t/t5326-multi-pack-bitmaps.sh | 22 +++++++++++++++++++++ 3 files changed, 45 insertions(+), 20 deletions(-)