Message ID | 5f332b799f90b64e2c0720fd0aba0e163d41587a.1566313865.git.gitgitgadget@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | New sparse-checkout builtin and "cone" mode | expand |
On Tue, Aug 20, 2019 at 8:14 AM Derrick Stolee via GitGitGadget <gitgitgadget@gmail.com> wrote: > > From: Derrick Stolee <dstolee@microsoft.com> > > The instructions for disabling a sparse-checkout to a full > working directory are complicated and non-intuitive. Add a > subcommand, 'git sparse-checkout disable', to perform those > steps for the user. > > Signed-off-by: Derrick Stolee <dstolee@microsoft.com> > --- > Documentation/git-sparse-checkout.txt | 26 +++++++--------- > builtin/sparse-checkout.c | 45 ++++++++++++++++++++++++--- > t/t1091-sparse-checkout-builtin.sh | 15 +++++++++ > 3 files changed, 67 insertions(+), 19 deletions(-) > > diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt > index 6f540a3443..de04b768ae 100644 > --- a/Documentation/git-sparse-checkout.txt > +++ b/Documentation/git-sparse-checkout.txt > @@ -38,6 +38,10 @@ COMMANDS > Add a set of patterns to the sparse-checkout file, as given over > stdin. Updates the working directory to match the new patterns. > > +'disable':: > + Remove the sparse-checkout file, set `core.sparseCheckout` to > + `false`, and restore the working directory to include all files. > + > SPARSE CHECKOUT > ---------------- > > @@ -60,6 +64,13 @@ Then it compares the new skip-worktree value with the previous one. If > skip-worktree turns from set to unset, it will add the corresponding > file back. If it turns from unset to set, that file will be removed. > > +To repopulate the working directory with all files, use the > +`git sparse-checkout disable` command. Make sense. > + > +Sparse checkout support in 'git read-tree' and similar commands is > +disabled by default. You need to set `core.sparseCheckout` to `true` > +in order to have sparse checkout support. But why add this paragraph? read-tree is plumbing that we'd rather not force on users, so I'd rather not mention it. And I thought we were setting core.sparseCheckout for the user. > -Another tricky thing is fully repopulating the working directory when you > -no longer want sparse checkout. You cannot just disable "sparse > -checkout" because skip-worktree bits are still in the index and your working > -directory is still sparsely populated. You should re-populate the working > -directory with the `$GIT_DIR/info/sparse-checkout` file content as > -follows: > - > ----------------- > -/* > ----------------- > - > -Then you can disable sparse checkout. Sparse checkout support in 'git > -read-tree' and similar commands is disabled by default. You need to > -set `core.sparseCheckout` to `true` in order to have sparse checkout > -support. Wahoo! > -static int sc_enable_config(void) > +static int sc_set_config(int mode) > { > struct argv_array argv = ARGV_ARRAY_INIT; > int result = 0; > - argv_array_pushl(&argv, "config", "--add", "core.sparseCheckout", "true", NULL); > + argv_array_pushl(&argv, "config", "--add", "core.sparseCheckout", NULL); Remove "--add" and add "--worktree". > + > + switch (mode) { > + case 1: > + argv_array_pushl(&argv, "true", NULL); > + break; > + > + case 0: > + argv_array_pushl(&argv, "false", NULL); > + break; > + > + default: > + die(_("invalid config mode")); > + } > > if (run_command_v_opt(argv.argv, RUN_GIT_CMD)) { Can't we use git_config_set instead of run_command_v_opt? > error(_("failed to enable core.sparseCheckout")); > @@ -125,7 +138,7 @@ static int sparse_checkout_init(int argc, const char **argv) > FILE *fp; > int res; > > - if (sc_enable_config()) > + if (sc_set_config(1)) Random idea: The code would be more self-documenting, if you just made sc_set_config take a string and you passed either "true" or "false". Then you could also dispense with the switch statement. Yes, you can make typos, but there are only going to be 2-3 places in the code that call it, right? > return 1; > > memset(&el, 0, sizeof(el)); > @@ -194,6 +207,28 @@ static int sparse_checkout_add(int argc, const char **argv) > return sc_read_tree(); > } > > +static int sparse_checkout_disable(int argc, const char **argv) > +{ > + char *sparse_filename; > + FILE *fp; > + > + if (sc_set_config(1)) > + die(_("failed to change config")); Ooh, preventative setting. This'll probably save some grief for people who get themselves in a weird state and start mucking around manually; very nice. > + > + sparse_filename = get_sparse_checkout_filename(); > + fp = fopen(sparse_filename, "w"); > + fprintf(fp, "/*\n"); > + fclose(fp); > + > + if (sc_read_tree()) > + die(_("error while refreshing working directory")); This can fail e.g. if there are conflicts in the index. Luckily, if they fix them up and then re-run "git sparse-checkout disable" then it can work. But you've already changed the $GIT_DIR/info/sparse-checkout file to a state that won't match what they actually have checked out. Will that cause any problems? (I can't think of any immediately, but I am curious.) Also, should or can we give a better error message, such as instructing them to try again after they've fixed any problems reported by the sc_read_tree() operation? > + > + unlink(sparse_filename); > + free(sparse_filename); > + > + return sc_set_config(0); > +} > + > int cmd_sparse_checkout(int argc, const char **argv, const char *prefix) > { > static struct option builtin_sparse_checkout_options[] = { > @@ -217,6 +252,8 @@ int cmd_sparse_checkout(int argc, const char **argv, const char *prefix) > return sparse_checkout_init(argc, argv); > if (!strcmp(argv[0], "add")) > return sparse_checkout_add(argc, argv); > + if (!strcmp(argv[0], "disable")) > + return sparse_checkout_disable(argc, argv); > } > > usage_with_options(builtin_sparse_checkout_usage, > diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh > index 499bd8d6d0..68ca63a6f6 100755 > --- a/t/t1091-sparse-checkout-builtin.sh > +++ b/t/t1091-sparse-checkout-builtin.sh > @@ -120,4 +120,19 @@ test_expect_success 'add to existing sparse-checkout' ' > test_cmp expect dir > ' > > +test_expect_success 'sparse-checkout disable' ' > + git -C repo sparse-checkout disable && > + test_path_is_missing repo/.git/info/sparse-checkout && > + git -C repo config --list >config && Should this command also have a --worktree flag (just for consistency, even if we know there will only be one worktree so it doesn't matter in practice)? There are probably similar cases I overlooked on the previous patches. > + test_i18ngrep "core.sparsecheckout=false" config && > + ls repo >dir && > + cat >expect <<-EOF && > + a > + deep > + folder1 > + folder2 > + EOF > + test_cmp expect dir > +' > + > test_done > \ No newline at end of file > -- > gitgitgadget >
diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index 6f540a3443..de04b768ae 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -38,6 +38,10 @@ COMMANDS Add a set of patterns to the sparse-checkout file, as given over stdin. Updates the working directory to match the new patterns. +'disable':: + Remove the sparse-checkout file, set `core.sparseCheckout` to + `false`, and restore the working directory to include all files. + SPARSE CHECKOUT ---------------- @@ -60,6 +64,13 @@ Then it compares the new skip-worktree value with the previous one. If skip-worktree turns from set to unset, it will add the corresponding file back. If it turns from unset to set, that file will be removed. +To repopulate the working directory with all files, use the +`git sparse-checkout disable` command. + +Sparse checkout support in 'git read-tree' and similar commands is +disabled by default. You need to set `core.sparseCheckout` to `true` +in order to have sparse checkout support. + ## FULL PATTERN SET By default, the sparse-checkout file uses the same syntax as `.gitignore` @@ -74,21 +85,6 @@ negate patterns. For example, to remove the file `unwanted`: !unwanted ---------------- -Another tricky thing is fully repopulating the working directory when you -no longer want sparse checkout. You cannot just disable "sparse -checkout" because skip-worktree bits are still in the index and your working -directory is still sparsely populated. You should re-populate the working -directory with the `$GIT_DIR/info/sparse-checkout` file content as -follows: - ----------------- -/* ----------------- - -Then you can disable sparse checkout. Sparse checkout support in 'git -read-tree' and similar commands is disabled by default. You need to -set `core.sparseCheckout` to `true` in order to have sparse checkout -support. SEE ALSO -------- diff --git a/builtin/sparse-checkout.c b/builtin/sparse-checkout.c index ec6134fecc..8f97c27ec7 100644 --- a/builtin/sparse-checkout.c +++ b/builtin/sparse-checkout.c @@ -8,7 +8,7 @@ #include "strbuf.h" static char const * const builtin_sparse_checkout_usage[] = { - N_("git sparse-checkout [init|add|list]"), + N_("git sparse-checkout [init|add|list|disable]"), NULL }; @@ -79,11 +79,24 @@ static int sc_read_tree(void) return result; } -static int sc_enable_config(void) +static int sc_set_config(int mode) { struct argv_array argv = ARGV_ARRAY_INIT; int result = 0; - argv_array_pushl(&argv, "config", "--add", "core.sparseCheckout", "true", NULL); + argv_array_pushl(&argv, "config", "--add", "core.sparseCheckout", NULL); + + switch (mode) { + case 1: + argv_array_pushl(&argv, "true", NULL); + break; + + case 0: + argv_array_pushl(&argv, "false", NULL); + break; + + default: + die(_("invalid config mode")); + } if (run_command_v_opt(argv.argv, RUN_GIT_CMD)) { error(_("failed to enable core.sparseCheckout")); @@ -125,7 +138,7 @@ static int sparse_checkout_init(int argc, const char **argv) FILE *fp; int res; - if (sc_enable_config()) + if (sc_set_config(1)) return 1; memset(&el, 0, sizeof(el)); @@ -194,6 +207,28 @@ static int sparse_checkout_add(int argc, const char **argv) return sc_read_tree(); } +static int sparse_checkout_disable(int argc, const char **argv) +{ + char *sparse_filename; + FILE *fp; + + if (sc_set_config(1)) + die(_("failed to change config")); + + sparse_filename = get_sparse_checkout_filename(); + fp = fopen(sparse_filename, "w"); + fprintf(fp, "/*\n"); + fclose(fp); + + if (sc_read_tree()) + die(_("error while refreshing working directory")); + + unlink(sparse_filename); + free(sparse_filename); + + return sc_set_config(0); +} + int cmd_sparse_checkout(int argc, const char **argv, const char *prefix) { static struct option builtin_sparse_checkout_options[] = { @@ -217,6 +252,8 @@ int cmd_sparse_checkout(int argc, const char **argv, const char *prefix) return sparse_checkout_init(argc, argv); if (!strcmp(argv[0], "add")) return sparse_checkout_add(argc, argv); + if (!strcmp(argv[0], "disable")) + return sparse_checkout_disable(argc, argv); } usage_with_options(builtin_sparse_checkout_usage, diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh index 499bd8d6d0..68ca63a6f6 100755 --- a/t/t1091-sparse-checkout-builtin.sh +++ b/t/t1091-sparse-checkout-builtin.sh @@ -120,4 +120,19 @@ test_expect_success 'add to existing sparse-checkout' ' test_cmp expect dir ' +test_expect_success 'sparse-checkout disable' ' + git -C repo sparse-checkout disable && + test_path_is_missing repo/.git/info/sparse-checkout && + git -C repo config --list >config && + test_i18ngrep "core.sparsecheckout=false" config && + ls repo >dir && + cat >expect <<-EOF && + a + deep + folder1 + folder2 + EOF + test_cmp expect dir +' + test_done \ No newline at end of file