@@ -126,8 +126,8 @@ test_expect_success 'extra headers' '
" &&
git config --add format.headers "Cc: S E Cipient <scipient@example.com>
" &&
- git format-patch --stdout master..side > patch2 &&
- sed -e "/^\$/q" patch2 > hdrs2 &&
+ git format-patch --stdout master..side >patch2 &&
+ sed -e "/^\$/q" patch2 >hdrs2 &&
grep "^To: R E Cipient <rcipient@example.com>\$" hdrs2 &&
grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs2
'
@@ -136,7 +136,7 @@ test_expect_success 'extra headers without newlines' '
git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" &&
git config --add format.headers "Cc: S E Cipient <scipient@example.com>" &&
git format-patch --stdout master..side >patch3 &&
- sed -e "/^\$/q" patch3 > hdrs3 &&
+ sed -e "/^\$/q" patch3 >hdrs3 &&
grep "^To: R E Cipient <rcipient@example.com>\$" hdrs3 &&
grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs3
'
@@ -144,8 +144,8 @@ test_expect_success 'extra headers without newlines' '
test_expect_success 'extra headers with multiple To:s' '
git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" &&
git config --add format.headers "To: S E Cipient <scipient@example.com>" &&
- git format-patch --stdout master..side > patch4 &&
- sed -e "/^\$/q" patch4 > hdrs4 &&
+ git format-patch --stdout master..side >patch4 &&
+ sed -e "/^\$/q" patch4 >hdrs4 &&
grep "^To: R E Cipient <rcipient@example.com>,\$" hdrs4 &&
grep "^ *S E Cipient <scipient@example.com>\$" hdrs4
'
@@ -318,7 +318,7 @@ test_expect_success 'reroll count (-v)' '
check_threading () {
expect="$1" &&
shift &&
- (git format-patch --stdout "$@"; echo $? > status.out) |
+ (git format-patch --stdout "$@"; echo $? >status.out) |
# Prints everything between the Message-ID and In-Reply-To,
# and replaces all Message-ID-lookalikes by a sequence number
perl -ne '
@@ -333,12 +333,12 @@ check_threading () {
print;
}
print "---\n" if /^From /i;
- ' > actual &&
+ ' >actual &&
test 0 = "$(cat status.out)" &&
test_cmp "$expect" actual
}
-cat >> expect.no-threading <<EOF
+cat >>expect.no-threading <<EOF
---
---
---
@@ -349,7 +349,7 @@ test_expect_success 'no threading' '
check_threading expect.no-threading master
'
-cat > expect.thread <<EOF
+cat >expect.thread <<EOF
---
Message-Id: <0>
---
@@ -366,7 +366,7 @@ test_expect_success 'thread' '
check_threading expect.thread --thread master
'
-cat > expect.in-reply-to <<EOF
+cat >expect.in-reply-to <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -386,7 +386,7 @@ test_expect_success 'thread in-reply-to' '
--thread master
'
-cat > expect.cover-letter <<EOF
+cat >expect.cover-letter <<EOF
---
Message-Id: <0>
---
@@ -407,7 +407,7 @@ test_expect_success 'thread cover-letter' '
check_threading expect.cover-letter --cover-letter --thread master
'
-cat > expect.cl-irt <<EOF
+cat >expect.cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -439,7 +439,7 @@ test_expect_success 'thread explicit shallow' '
--in-reply-to="<test.message>" --thread=shallow master
'
-cat > expect.deep <<EOF
+cat >expect.deep <<EOF
---
Message-Id: <0>
---
@@ -457,7 +457,7 @@ test_expect_success 'thread deep' '
check_threading expect.deep --thread=deep master
'
-cat > expect.deep-irt <<EOF
+cat >expect.deep-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -480,7 +480,7 @@ test_expect_success 'thread deep in-reply-to' '
--in-reply-to="<test.message>" master
'
-cat > expect.deep-cl <<EOF
+cat >expect.deep-cl <<EOF
---
Message-Id: <0>
---
@@ -504,7 +504,7 @@ test_expect_success 'thread deep cover-letter' '
check_threading expect.deep-cl --cover-letter --thread=deep master
'
-cat > expect.deep-cl-irt <<EOF
+cat >expect.deep-cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -584,7 +584,7 @@ test_expect_success 'cover-letter inherits diff options' '
grep "file => foo .* 0 *\$" 0000-cover-letter.patch
'
-cat > expect << EOF
+cat >expect <<EOF
This is an excessively long subject line for a message due to the
habit some projects have of not having a short, one-line subject at
the start of the commit message, but rather sticking a whole
@@ -596,11 +596,11 @@ EOF
test_expect_success 'shortlog of cover-letter wraps overly-long onelines' '
git format-patch --cover-letter -2 &&
- sed -e "1,/A U Thor/d" -e "/^\$/q" < 0000-cover-letter.patch > output &&
+ sed -e "1,/A U Thor/d" -e "/^\$/q" <0000-cover-letter.patch >output &&
test_cmp expect output
'
-cat > expect << EOF
+cat >expect <<EOF
index $before..$after 100644
--- a/file
+++ b/file
@@ -620,7 +620,7 @@ test_expect_success 'format-patch respects -U' '
test_cmp expect output
'
-cat > expect << EOF
+cat >expect <<EOF
diff --git a/file b/file
index $before..$after 100644
@@ -635,7 +635,7 @@ EOF
test_expect_success 'format-patch -p suppresses stat' '
git format-patch -p -2 &&
- sed -e "1,/^\$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output &&
+ sed -e "1,/^\$/d" -e "/^+5/q" <0001-This-is-an-excessively-long-subject-line-for-a-messa.patch >output &&
test_cmp expect output
'
@@ -689,7 +689,7 @@ test_expect_success 'format-patch from a subdirectory (3)' '
'
test_expect_success 'format-patch --in-reply-to' '
- git format-patch -1 --stdout --in-reply-to "baz@foo.bar" > patch8 &&
+ git format-patch -1 --stdout --in-reply-to "baz@foo.bar" >patch8 &&
grep "^In-Reply-To: <baz@foo.bar>" patch8 &&
grep "^References: <baz@foo.bar>" patch8
'
@@ -780,21 +780,21 @@ test_expect_success 'format-patch with multiple notes refs' '
! grep "this is note 2" out
'
-echo "fatal: --name-only does not make sense" > expect.name-only
-echo "fatal: --name-status does not make sense" > expect.name-status
-echo "fatal: --check does not make sense" > expect.check
+echo "fatal: --name-only does not make sense" >expect.name-only
+echo "fatal: --name-status does not make sense" >expect.name-status
+echo "fatal: --check does not make sense" >expect.check
test_expect_success 'options no longer allowed for format-patch' '
- test_must_fail git format-patch --name-only 2> output &&
+ test_must_fail git format-patch --name-only 2>output &&
test_i18ncmp expect.name-only output &&
- test_must_fail git format-patch --name-status 2> output &&
+ test_must_fail git format-patch --name-status 2>output &&
test_i18ncmp expect.name-status output &&
- test_must_fail git format-patch --check 2> output &&
+ test_must_fail git format-patch --check 2>output &&
test_i18ncmp expect.check output
'
test_expect_success 'format-patch --numstat should produce a patch' '
- git format-patch --numstat --stdout master..side > output &&
+ git format-patch --numstat --stdout master..side >output &&
test 5 = $(grep "^diff --git a/" output | wc -l)
'
@@ -1610,14 +1610,14 @@ test_expect_success 'format-patch --base' '
echo "base-commit: $(git rev-parse HEAD~3)" >>expect &&
echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expect &&
echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expect &&
- signature >> expect &&
+ signature >>expect &&
test_cmp expect actual1 &&
test_cmp expect actual2 &&
echo >fail &&
echo "base-commit: $(git rev-parse HEAD~3)" >>fail &&
echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --unstable | awk "{print \$1}")" >>fail &&
echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --unstable | awk "{print \$1}")" >>fail &&
- signature >> fail &&
+ signature >>fail &&
! test_cmp fail actual1 &&
! test_cmp fail actual2
'
For shell scripts, the usual convention is for there to be no space after redirection operators, (e.g. `>file`, not `> file`). Remove these spaces wherever they appear. Signed-off-by: Denton Liu <liu.denton@gmail.com> --- t/t4014-format-patch.sh | 62 ++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 31 deletions(-)