diff mbox series

[v2,24/24] p5326: perf tests for MIDX bitmaps

Message ID ec0f53b4249ff668106319473f49260ab8478314.1624314293.git.me@ttaylorr.com (mailing list archive)
State New, archived
Headers show
Series multi-pack reachability bitmaps | expand

Commit Message

Taylor Blau June 21, 2021, 10:26 p.m. UTC
These new performance tests demonstrate effectively the same behavior as
p5310, but use a multi-pack bitmap instead of a single-pack one.

Notably, p5326 does not create a MIDX bitmap with multiple packs. This
is so we can measure a direct comparison between it and p5310. Any
difference between the two is measuring just the overhead of using MIDX
bitmaps.

Here are the results of p5310 and p5326 together, measured at the same
time and on the same machine (using a Xenon W-2255 CPU):

    Test                                                  HEAD
    ------------------------------------------------------------------------
    5310.2: repack to disk                                96.78(93.39+11.33)
    5310.3: simulated clone                               9.98(9.79+0.19)
    5310.4: simulated fetch                               1.75(4.26+0.19)
    5310.5: pack to file (bitmap)                         28.20(27.87+8.70)
    5310.6: rev-list (commits)                            0.41(0.36+0.05)
    5310.7: rev-list (objects)                            1.61(1.54+0.07)
    5310.8: rev-list count with blob:none                 0.25(0.21+0.04)
    5310.9: rev-list count with blob:limit=1k             2.65(2.54+0.10)
    5310.10: rev-list count with tree:0                   0.23(0.19+0.04)
    5310.11: simulated partial clone                      4.34(4.21+0.12)
    5310.13: clone (partial bitmap)                       11.05(12.21+0.48)
    5310.14: pack to file (partial bitmap)                31.25(34.22+3.70)
    5310.15: rev-list with tree filter (partial bitmap)   0.26(0.22+0.04)

versus the same tests (this time using a multi-pack index):

    Test                                                  HEAD
    ------------------------------------------------------------------------
    5326.2: setup multi-pack index                        78.99(75.29+11.58)
    5326.3: simulated clone                               11.78(11.56+0.22)
    5326.4: simulated fetch                               1.70(4.49+0.13)
    5326.5: pack to file (bitmap)                         28.02(27.72+8.76)
    5326.6: rev-list (commits)                            0.42(0.36+0.06)
    5326.7: rev-list (objects)                            1.65(1.58+0.06)
    5326.8: rev-list count with blob:none                 0.26(0.21+0.05)
    5326.9: rev-list count with blob:limit=1k             2.97(2.86+0.10)
    5326.10: rev-list count with tree:0                   0.25(0.20+0.04)
    5326.11: simulated partial clone                      5.65(5.49+0.16)
    5326.13: clone (partial bitmap)                       12.22(13.43+0.38)
    5326.14: pack to file (partial bitmap)                30.05(31.57+7.25)
    5326.15: rev-list with tree filter (partial bitmap)   0.24(0.20+0.04)

There is slight overhead in "simulated clone", "simulated partial
clone", and "clone (partial bitmap)". Unsurprisingly, that overhead is
due to using the MIDX's reverse index to map between bit positions and
MIDX positions.

This can be reproduced by running "git repack -adb" along with "git
multi-pack-index write --bitmap" in a large-ish repository. Then run:

    $ perf record -o pack.perf git -c core.multiPackIndex=false \
      pack-objects --all --stdout >/dev/null </dev/null
    $ perf record -o midx.perf git -c core.multiPackIndex=true \
      pack-objects --all --stdout >/dev/null </dev/null

and compare the two with "perf diff -c delta -o 1 pack.perf midx.perf".
The most notable results are below (the next largest positive delta is
+0.14%):

    # Event 'cycles'
    #
    # Baseline    Delta  Shared Object       Symbol
    # ........  .......  ..................  ..........................
    #
                 +5.86%  git                 [.] nth_midxed_offset
                 +5.24%  git                 [.] nth_midxed_pack_int_id
         3.45%   +0.97%  git                 [.] offset_to_pack_pos
         3.30%   +0.57%  git                 [.] pack_pos_to_offset
                 +0.30%  git                 [.] pack_pos_to_midx

Signed-off-by: Taylor Blau <me@ttaylorr.com>
---
 t/perf/p5326-multi-pack-bitmaps.sh | 43 ++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100755 t/perf/p5326-multi-pack-bitmaps.sh
diff mbox series

Patch

diff --git a/t/perf/p5326-multi-pack-bitmaps.sh b/t/perf/p5326-multi-pack-bitmaps.sh
new file mode 100755
index 0000000000..5845109ac7
--- /dev/null
+++ b/t/perf/p5326-multi-pack-bitmaps.sh
@@ -0,0 +1,43 @@ 
+#!/bin/sh
+
+test_description='Tests performance using midx bitmaps'
+. ./perf-lib.sh
+. "${TEST_DIRECTORY}/perf/lib-bitmap.sh"
+
+test_perf_large_repo
+
+test_expect_success 'enable multi-pack index' '
+	git config core.multiPackIndex true
+'
+
+test_perf 'setup multi-pack index' '
+	git repack -ad &&
+	git multi-pack-index write --bitmap
+'
+
+test_full_bitmap
+
+test_expect_success 'create partial bitmap state' '
+	# pick a commit to represent the repo tip in the past
+	cutoff=$(git rev-list HEAD~100 -1) &&
+	orig_tip=$(git rev-parse HEAD) &&
+
+	# now pretend we have just one tip
+	rm -rf .git/logs .git/refs/* .git/packed-refs &&
+	git update-ref HEAD $cutoff &&
+
+	# and then repack, which will leave us with a nice
+	# big bitmap pack of the "old" history, and all of
+	# the new history will be loose, as if it had been pushed
+	# up incrementally and exploded via unpack-objects
+	git repack -Ad &&
+	git multi-pack-index write --bitmap &&
+
+	# and now restore our original tip, as if the pushes
+	# had happened
+	git update-ref HEAD $orig_tip
+'
+
+test_partial_bitmap
+
+test_done