Message ID | fe674bf63e8d5b8a06a3f880db4dc4bcfd2183f6.1557327652.git.liu.denton@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | format-patch: teach format.notes config option | expand |
On 08.05.19 17:02, Denton Liu wrote: > In git-format-patch, notes can be appended with the `--notes` option. > However, this must be specified by the user on an > invocation-by-invocation basis. If a user is not careful, it's possible > that they may forget to include it and generate a patch series without > notes. > > Teach git-format-patch the `format.notes` config option its value is a s/its/. Its/ > notes ref that will be automatically be appended. The special value of Drop the second "be ". > "standard" can be used to specify the standard notes. This option is > overridable with the `--no-notes` option in case a user wishes not to > append notes. > > Signed-off-by: Denton Liu <liu.denton@gmail.com> > --- > One thing I'm worried about is that I'm not really sure using "standard" > as the special value is a good idea. Would "auto" be a better special > value? > > Documentation/config/format.txt | 13 ++++++ > Documentation/git-format-patch.txt | 3 ++ > builtin/log.c | 18 +++++++- > t/t4014-format-patch.sh | 70 ++++++++++++++++++++++++++++++ > 4 files changed, 103 insertions(+), 1 deletion(-) > > diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt > index dc77941c48..e25f9cfc61 100644 > --- a/Documentation/config/format.txt > +++ b/Documentation/config/format.txt > @@ -85,3 +85,16 @@ format.outputDirectory:: > format.useAutoBase:: > A boolean value which lets you enable the `--base=auto` option of > format-patch by default. > + > +format.notes:: > + A ref which specifies where to get the notes (see > + linkgit:git-notes[1]) that are appended for the commit after the > + three-dash line. > ++ > +If the special value of "standard" is specified, then the standard notes > +ref is used (i.e. the notes ref used by `git notes` when no `--ref` > +argument is specified). If one wishes to use the ref > +`ref/notes/standard`, please use that literal instead. > ++ > +This configuration can be specified multiple times in order to allow > +multiple notes refs to be included. > diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt > index 2c3971390e..9ce5b8aaee 100644 > --- a/Documentation/git-format-patch.txt > +++ b/Documentation/git-format-patch.txt > @@ -275,6 +275,9 @@ these explanations after `format-patch` has run but before sending, > keeping them as Git notes allows them to be maintained between versions > of the patch series (but see the discussion of the `notes.rewrite` > configuration options in linkgit:git-notes[1] to use this workflow). > ++ > +The default is `--no-notes`, unless the `format.notes` configuration is > +set. > > --[no-]signature=<signature>:: > Add a signature to each message produced. Per RFC 3676 the signature > diff --git a/builtin/log.c b/builtin/log.c > index e43ee12fb1..24954e42b0 100644 > --- a/builtin/log.c > +++ b/builtin/log.c > @@ -779,6 +779,8 @@ enum { > > static int git_format_config(const char *var, const char *value, void *cb) > { > + struct rev_info *rev = cb; > + > if (!strcmp(var, "format.headers")) { > if (!value) > die(_("format.headers without value")); > @@ -864,6 +866,20 @@ static int git_format_config(const char *var, const char *value, void *cb) > from = NULL; > return 0; > } > + if (!strcmp(var, "format.notes")) { > + struct strbuf buf = STRBUF_INIT; > + > + rev->show_notes = 1; > + if (!strcmp(value, "standard")) > + rev->notes_opt.use_default_notes = 1; > + else { Use braces on both parts of the "if", if one part needs them. > + strbuf_addstr(&buf, value); > + expand_notes_ref(&buf); > + string_list_append(&rev->notes_opt.extra_notes_refs, > + strbuf_detach(&buf, NULL)); > + } > + return 0; > + } > > return git_log_config(var, value, cb); > } > @@ -1617,8 +1633,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) > extra_to.strdup_strings = 1; > extra_cc.strdup_strings = 1; > init_log_defaults(); > - git_config(git_format_config, NULL); > repo_init_revisions(the_repository, &rev, prefix); > + git_config(git_format_config, &rev); > rev.commit_format = CMIT_FMT_EMAIL; > rev.expand_tabs_in_log_default = 0; > rev.verbose_header = 1; > diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh > index b6e2fdbc44..e0127282ba 100755 > --- a/t/t4014-format-patch.sh > +++ b/t/t4014-format-patch.sh > @@ -738,6 +738,76 @@ test_expect_success 'format-patch --notes --signoff' ' > sed "1,/^---$/d" out | grep "test message" > ' > > +test_expect_success 'format-patch notes output control' ' > + git notes add -m "notes config message" HEAD && > + test_when_finished git notes remove HEAD && > + > + git format-patch -1 --stdout >out && > + ! grep "notes config message" out && > + git format-patch -1 --stdout --notes >out && > + grep "notes config message" out && > + git format-patch -1 --stdout --no-notes >out && > + ! grep "notes config message" out && > + git format-patch -1 --stdout --notes --no-notes >out && > + ! grep "notes config message" out && > + git format-patch -1 --stdout --no-notes --notes >out && > + grep "notes config message" out && > + > + test_config format.notes standard && > + git format-patch -1 --stdout >out && > + grep "notes config message" out && > + git format-patch -1 --stdout --notes >out && > + grep "notes config message" out && > + git format-patch -1 --stdout --no-notes >out && > + ! grep "notes config message" out && > + git format-patch -1 --stdout --notes --no-notes >out && > + ! grep "notes config message" out && > + git format-patch -1 --stdout --no-notes --notes >out && > + grep "notes config message" out > +' > + > +test_expect_success 'format-patch with multiple notes refs' ' > + git notes --ref note1 add -m "this is note 1" HEAD && > + test_when_finished git notes --ref note1 remove HEAD && > + git notes --ref note2 add -m "this is note 2" HEAD && > + test_when_finished git notes --ref note2 remove HEAD && > + > + git format-patch -1 --stdout >out && > + ! grep "this is note 1" out && > + ! grep "this is note 2" out && > + git format-patch -1 --stdout --notes=note1 >out && > + grep "this is note 1" out && > + ! grep "this is note 2" out && > + git format-patch -1 --stdout --notes=note2 >out && > + ! grep "this is note 1" out && > + grep "this is note 2" out && > + git format-patch -1 --stdout --notes=note1 --notes=note2 >out && > + grep "this is note 1" out && > + grep "this is note 2" out && > + > + test_config format.notes note1 && > + git format-patch -1 --stdout >out && > + grep "this is note 1" out && > + ! grep "this is note 2" out && > + git format-patch -1 --stdout --no-notes >out && > + ! grep "this is note 1" out && > + ! grep "this is note 2" out && > + git format-patch -1 --stdout --notes=note2 >out && > + grep "this is note 1" out && > + grep "this is note 2" out && > + git format-patch -1 --stdout --no-notes --notes=note2 >out && > + ! grep "this is note 1" out && > + grep "this is note 2" out && > + > + git config --add format.notes note2 && > + git format-patch -1 --stdout >out && > + grep "this is note 1" out && > + grep "this is note 2" out && > + git format-patch -1 --stdout --no-notes >out && > + ! grep "this is note 1" out && > + ! grep "this is note 2" out > +' > + > echo "fatal: --name-only does not make sense" > expect.name-only > echo "fatal: --name-status does not make sense" > expect.name-status > echo "fatal: --check does not make sense" > expect.check > Cheers, Beat
Hi Beat, On Wed, May 08, 2019 at 07:18:18PM +0200, Beat Bolli wrote: > On 08.05.19 17:02, Denton Liu wrote: > > In git-format-patch, notes can be appended with the `--notes` option. > > However, this must be specified by the user on an > > invocation-by-invocation basis. If a user is not careful, it's possible > > that they may forget to include it and generate a patch series without > > notes. > > > > Teach git-format-patch the `format.notes` config option its value is a > > s/its/. Its/ > > > notes ref that will be automatically be appended. The special value of > > Drop the second "be ". Thanks, I should've read through the log message more carefully before sending. > > > "standard" can be used to specify the standard notes. This option is > > overridable with the `--no-notes` option in case a user wishes not to > > append notes. > > > > Signed-off-by: Denton Liu <liu.denton@gmail.com> > > --- > > One thing I'm worried about is that I'm not really sure using "standard" > > as the special value is a good idea. Would "auto" be a better special > > value? > > > > Documentation/config/format.txt | 13 ++++++ > > Documentation/git-format-patch.txt | 3 ++ > > builtin/log.c | 18 +++++++- > > t/t4014-format-patch.sh | 70 ++++++++++++++++++++++++++++++ > > 4 files changed, 103 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt > > index dc77941c48..e25f9cfc61 100644 > > --- a/Documentation/config/format.txt > > +++ b/Documentation/config/format.txt > > @@ -85,3 +85,16 @@ format.outputDirectory:: > > format.useAutoBase:: > > A boolean value which lets you enable the `--base=auto` option of > > format-patch by default. > > + > > +format.notes:: > > + A ref which specifies where to get the notes (see > > + linkgit:git-notes[1]) that are appended for the commit after the > > + three-dash line. > > ++ > > +If the special value of "standard" is specified, then the standard notes > > +ref is used (i.e. the notes ref used by `git notes` when no `--ref` > > +argument is specified). If one wishes to use the ref > > +`ref/notes/standard`, please use that literal instead. > > ++ > > +This configuration can be specified multiple times in order to allow > > +multiple notes refs to be included. > > diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt > > index 2c3971390e..9ce5b8aaee 100644 > > --- a/Documentation/git-format-patch.txt > > +++ b/Documentation/git-format-patch.txt > > @@ -275,6 +275,9 @@ these explanations after `format-patch` has run but before sending, > > keeping them as Git notes allows them to be maintained between versions > > of the patch series (but see the discussion of the `notes.rewrite` > > configuration options in linkgit:git-notes[1] to use this workflow). > > ++ > > +The default is `--no-notes`, unless the `format.notes` configuration is > > +set. > > > > --[no-]signature=<signature>:: > > Add a signature to each message produced. Per RFC 3676 the signature > > diff --git a/builtin/log.c b/builtin/log.c > > index e43ee12fb1..24954e42b0 100644 > > --- a/builtin/log.c > > +++ b/builtin/log.c > > @@ -779,6 +779,8 @@ enum { > > > > static int git_format_config(const char *var, const char *value, void *cb) > > { > > + struct rev_info *rev = cb; > > + > > if (!strcmp(var, "format.headers")) { > > if (!value) > > die(_("format.headers without value")); > > @@ -864,6 +866,20 @@ static int git_format_config(const char *var, const char *value, void *cb) > > from = NULL; > > return 0; > > } > > + if (!strcmp(var, "format.notes")) { > > + struct strbuf buf = STRBUF_INIT; > > + > > + rev->show_notes = 1; > > + if (!strcmp(value, "standard")) > > + rev->notes_opt.use_default_notes = 1; > > + else { > > Use braces on both parts of the "if", if one part needs them. I thought that the style preference in this project is to not use braces whenever it's unnecessary, even if it's on just one arm of an if-else. Thanks, Denton > > > + strbuf_addstr(&buf, value); > > + expand_notes_ref(&buf); > > + string_list_append(&rev->notes_opt.extra_notes_refs, > > + strbuf_detach(&buf, NULL)); > > + } > > + return 0; > > + } > > > > return git_log_config(var, value, cb); > > } > > @@ -1617,8 +1633,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) > > extra_to.strdup_strings = 1; > > extra_cc.strdup_strings = 1; > > init_log_defaults(); > > - git_config(git_format_config, NULL); > > repo_init_revisions(the_repository, &rev, prefix); > > + git_config(git_format_config, &rev); > > rev.commit_format = CMIT_FMT_EMAIL; > > rev.expand_tabs_in_log_default = 0; > > rev.verbose_header = 1; > > diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh > > index b6e2fdbc44..e0127282ba 100755 > > --- a/t/t4014-format-patch.sh > > +++ b/t/t4014-format-patch.sh > > @@ -738,6 +738,76 @@ test_expect_success 'format-patch --notes --signoff' ' > > sed "1,/^---$/d" out | grep "test message" > > ' > > > > +test_expect_success 'format-patch notes output control' ' > > + git notes add -m "notes config message" HEAD && > > + test_when_finished git notes remove HEAD && > > + > > + git format-patch -1 --stdout >out && > > + ! grep "notes config message" out && > > + git format-patch -1 --stdout --notes >out && > > + grep "notes config message" out && > > + git format-patch -1 --stdout --no-notes >out && > > + ! grep "notes config message" out && > > + git format-patch -1 --stdout --notes --no-notes >out && > > + ! grep "notes config message" out && > > + git format-patch -1 --stdout --no-notes --notes >out && > > + grep "notes config message" out && > > + > > + test_config format.notes standard && > > + git format-patch -1 --stdout >out && > > + grep "notes config message" out && > > + git format-patch -1 --stdout --notes >out && > > + grep "notes config message" out && > > + git format-patch -1 --stdout --no-notes >out && > > + ! grep "notes config message" out && > > + git format-patch -1 --stdout --notes --no-notes >out && > > + ! grep "notes config message" out && > > + git format-patch -1 --stdout --no-notes --notes >out && > > + grep "notes config message" out > > +' > > + > > +test_expect_success 'format-patch with multiple notes refs' ' > > + git notes --ref note1 add -m "this is note 1" HEAD && > > + test_when_finished git notes --ref note1 remove HEAD && > > + git notes --ref note2 add -m "this is note 2" HEAD && > > + test_when_finished git notes --ref note2 remove HEAD && > > + > > + git format-patch -1 --stdout >out && > > + ! grep "this is note 1" out && > > + ! grep "this is note 2" out && > > + git format-patch -1 --stdout --notes=note1 >out && > > + grep "this is note 1" out && > > + ! grep "this is note 2" out && > > + git format-patch -1 --stdout --notes=note2 >out && > > + ! grep "this is note 1" out && > > + grep "this is note 2" out && > > + git format-patch -1 --stdout --notes=note1 --notes=note2 >out && > > + grep "this is note 1" out && > > + grep "this is note 2" out && > > + > > + test_config format.notes note1 && > > + git format-patch -1 --stdout >out && > > + grep "this is note 1" out && > > + ! grep "this is note 2" out && > > + git format-patch -1 --stdout --no-notes >out && > > + ! grep "this is note 1" out && > > + ! grep "this is note 2" out && > > + git format-patch -1 --stdout --notes=note2 >out && > > + grep "this is note 1" out && > > + grep "this is note 2" out && > > + git format-patch -1 --stdout --no-notes --notes=note2 >out && > > + ! grep "this is note 1" out && > > + grep "this is note 2" out && > > + > > + git config --add format.notes note2 && > > + git format-patch -1 --stdout >out && > > + grep "this is note 1" out && > > + grep "this is note 2" out && > > + git format-patch -1 --stdout --no-notes >out && > > + ! grep "this is note 1" out && > > + ! grep "this is note 2" out > > +' > > + > > echo "fatal: --name-only does not make sense" > expect.name-only > > echo "fatal: --name-status does not make sense" > expect.name-status > > echo "fatal: --check does not make sense" > expect.check > > > > Cheers, Beat
On 08.05.19 19:31, Denton Liu wrote: > Hi Beat, > > On Wed, May 08, 2019 at 07:18:18PM +0200, Beat Bolli wrote: >> On 08.05.19 17:02, Denton Liu wrote: >>> In git-format-patch, notes can be appended with the `--notes` option. >>> However, this must be specified by the user on an >>> invocation-by-invocation basis. If a user is not careful, it's possible >>> that they may forget to include it and generate a patch series without >>> notes. >>> >>> Teach git-format-patch the `format.notes` config option its value is a >> >> s/its/. Its/ >> >>> notes ref that will be automatically be appended. The special value of >> >> Drop the second "be ". > > Thanks, I should've read through the log message more carefully before > sending. > >> >>> "standard" can be used to specify the standard notes. This option is >>> overridable with the `--no-notes` option in case a user wishes not to >>> append notes. >>> >>> Signed-off-by: Denton Liu <liu.denton@gmail.com> >>> --- >>> One thing I'm worried about is that I'm not really sure using "standard" >>> as the special value is a good idea. Would "auto" be a better special >>> value? >>> >>> Documentation/config/format.txt | 13 ++++++ >>> Documentation/git-format-patch.txt | 3 ++ >>> builtin/log.c | 18 +++++++- >>> t/t4014-format-patch.sh | 70 ++++++++++++++++++++++++++++++ >>> 4 files changed, 103 insertions(+), 1 deletion(-) >>> >>> diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt >>> index dc77941c48..e25f9cfc61 100644 >>> --- a/Documentation/config/format.txt >>> +++ b/Documentation/config/format.txt >>> @@ -85,3 +85,16 @@ format.outputDirectory:: >>> format.useAutoBase:: >>> A boolean value which lets you enable the `--base=auto` option of >>> format-patch by default. >>> + >>> +format.notes:: >>> + A ref which specifies where to get the notes (see >>> + linkgit:git-notes[1]) that are appended for the commit after the >>> + three-dash line. >>> ++ >>> +If the special value of "standard" is specified, then the standard notes >>> +ref is used (i.e. the notes ref used by `git notes` when no `--ref` >>> +argument is specified). If one wishes to use the ref >>> +`ref/notes/standard`, please use that literal instead. >>> ++ >>> +This configuration can be specified multiple times in order to allow >>> +multiple notes refs to be included. >>> diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt >>> index 2c3971390e..9ce5b8aaee 100644 >>> --- a/Documentation/git-format-patch.txt >>> +++ b/Documentation/git-format-patch.txt >>> @@ -275,6 +275,9 @@ these explanations after `format-patch` has run but before sending, >>> keeping them as Git notes allows them to be maintained between versions >>> of the patch series (but see the discussion of the `notes.rewrite` >>> configuration options in linkgit:git-notes[1] to use this workflow). >>> ++ >>> +The default is `--no-notes`, unless the `format.notes` configuration is >>> +set. >>> >>> --[no-]signature=<signature>:: >>> Add a signature to each message produced. Per RFC 3676 the signature >>> diff --git a/builtin/log.c b/builtin/log.c >>> index e43ee12fb1..24954e42b0 100644 >>> --- a/builtin/log.c >>> +++ b/builtin/log.c >>> @@ -779,6 +779,8 @@ enum { >>> >>> static int git_format_config(const char *var, const char *value, void *cb) >>> { >>> + struct rev_info *rev = cb; >>> + >>> if (!strcmp(var, "format.headers")) { >>> if (!value) >>> die(_("format.headers without value")); >>> @@ -864,6 +866,20 @@ static int git_format_config(const char *var, const char *value, void *cb) >>> from = NULL; >>> return 0; >>> } >>> + if (!strcmp(var, "format.notes")) { >>> + struct strbuf buf = STRBUF_INIT; >>> + >>> + rev->show_notes = 1; >>> + if (!strcmp(value, "standard")) >>> + rev->notes_opt.use_default_notes = 1; >>> + else { >> >> Use braces on both parts of the "if", if one part needs them. > > I thought that the style preference in this project is to not use braces > whenever it's unnecessary, even if it's on just one arm of an if-else. No, Documentation/CodingGuidelines mentions this case explicitly. Search for "multiple arms". ATB, Beat
diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index dc77941c48..e25f9cfc61 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -85,3 +85,16 @@ format.outputDirectory:: format.useAutoBase:: A boolean value which lets you enable the `--base=auto` option of format-patch by default. + +format.notes:: + A ref which specifies where to get the notes (see + linkgit:git-notes[1]) that are appended for the commit after the + three-dash line. ++ +If the special value of "standard" is specified, then the standard notes +ref is used (i.e. the notes ref used by `git notes` when no `--ref` +argument is specified). If one wishes to use the ref +`ref/notes/standard`, please use that literal instead. ++ +This configuration can be specified multiple times in order to allow +multiple notes refs to be included. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 2c3971390e..9ce5b8aaee 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -275,6 +275,9 @@ these explanations after `format-patch` has run but before sending, keeping them as Git notes allows them to be maintained between versions of the patch series (but see the discussion of the `notes.rewrite` configuration options in linkgit:git-notes[1] to use this workflow). ++ +The default is `--no-notes`, unless the `format.notes` configuration is +set. --[no-]signature=<signature>:: Add a signature to each message produced. Per RFC 3676 the signature diff --git a/builtin/log.c b/builtin/log.c index e43ee12fb1..24954e42b0 100644 --- a/builtin/log.c +++ b/builtin/log.c @@ -779,6 +779,8 @@ enum { static int git_format_config(const char *var, const char *value, void *cb) { + struct rev_info *rev = cb; + if (!strcmp(var, "format.headers")) { if (!value) die(_("format.headers without value")); @@ -864,6 +866,20 @@ static int git_format_config(const char *var, const char *value, void *cb) from = NULL; return 0; } + if (!strcmp(var, "format.notes")) { + struct strbuf buf = STRBUF_INIT; + + rev->show_notes = 1; + if (!strcmp(value, "standard")) + rev->notes_opt.use_default_notes = 1; + else { + strbuf_addstr(&buf, value); + expand_notes_ref(&buf); + string_list_append(&rev->notes_opt.extra_notes_refs, + strbuf_detach(&buf, NULL)); + } + return 0; + } return git_log_config(var, value, cb); } @@ -1617,8 +1633,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix) extra_to.strdup_strings = 1; extra_cc.strdup_strings = 1; init_log_defaults(); - git_config(git_format_config, NULL); repo_init_revisions(the_repository, &rev, prefix); + git_config(git_format_config, &rev); rev.commit_format = CMIT_FMT_EMAIL; rev.expand_tabs_in_log_default = 0; rev.verbose_header = 1; diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b6e2fdbc44..e0127282ba 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -738,6 +738,76 @@ test_expect_success 'format-patch --notes --signoff' ' sed "1,/^---$/d" out | grep "test message" ' +test_expect_success 'format-patch notes output control' ' + git notes add -m "notes config message" HEAD && + test_when_finished git notes remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out && + + test_config format.notes standard && + git format-patch -1 --stdout >out && + grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out +' + +test_expect_success 'format-patch with multiple notes refs' ' + git notes --ref note1 add -m "this is note 1" HEAD && + test_when_finished git notes --ref note1 remove HEAD && + git notes --ref note2 add -m "this is note 2" HEAD && + test_when_finished git notes --ref note2 remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + + test_config format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + + git config --add format.notes note2 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out +' + echo "fatal: --name-only does not make sense" > expect.name-only echo "fatal: --name-status does not make sense" > expect.name-status echo "fatal: --check does not make sense" > expect.check
In git-format-patch, notes can be appended with the `--notes` option. However, this must be specified by the user on an invocation-by-invocation basis. If a user is not careful, it's possible that they may forget to include it and generate a patch series without notes. Teach git-format-patch the `format.notes` config option its value is a notes ref that will be automatically be appended. The special value of "standard" can be used to specify the standard notes. This option is overridable with the `--no-notes` option in case a user wishes not to append notes. Signed-off-by: Denton Liu <liu.denton@gmail.com> --- One thing I'm worried about is that I'm not really sure using "standard" as the special value is a good idea. Would "auto" be a better special value? Documentation/config/format.txt | 13 ++++++ Documentation/git-format-patch.txt | 3 ++ builtin/log.c | 18 +++++++- t/t4014-format-patch.sh | 70 ++++++++++++++++++++++++++++++ 4 files changed, 103 insertions(+), 1 deletion(-)