mbox series

[0/3] Add i.MX91 platform support

Message ID 20241108022703.1877171-1-pengfei.li_1@nxp.com (mailing list archive)
Headers show
Series Add i.MX91 platform support | expand

Message

Pengfei Li Nov. 8, 2024, 2:27 a.m. UTC 
The design of the i.MX91 platform is very similar to i.MX93.
The mainly difference between i.MX91 and i.MX93 is as follows:
- i.MX91 removed some clocks and modified the names of some clocks.
- i.MX91 only has one A core

Therefore, i.MX91 can reuse i.MX93 dtsi.

Pengfei Li (3):
  dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
  arm64: dts: freescale: Add i.MX91 dtsi support
  arm64: dts: freescale: Add i.MX91 11x11 EVK basic support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx91-11x11-evk.dts    | 820 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 ++++++++++++++++
 arch/arm64/boot/dts/freescale/imx91.dtsi      |  66 ++
 5 files changed, 1663 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi