mbox series

[v5,0/2] add NXP LINFlexD UART clock support for S32G2/S32G3

Message ID 20241118154449.3895692-1-ciprianmarian.costea@oss.nxp.com (mailing list archive)
Headers show
Series add NXP LINFlexD UART clock support for S32G2/S32G3 | expand

Message

Ciprian Costea Nov. 18, 2024, 3:44 p.m. UTC 
From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

LINFlexD driver was working on S32 based boards without clock management
because the downstream bootloaders (TF-A [1] and U-Boot [2]) were
performing the LINFlexD clock management.

LINFlexD driver from Linux Kernel should manage its clocks independently
and not rely on a previous bootloader configuration.

[1] https://github.com/nxp-auto-linux/arm-trusted-firmware
[2] https://github.com/nxp-auto-linux/u-boot

Changes in V5:
- Use 'devm_add_action_or_reset' to disable LINFlexD clocks if errors
occur on the probe path.

Changes in V4:
- Switched clock management to 'clk bulk' API usage
- Added more context for this patchset

Changes in V3:
- Fixed an error reported by 'dt_bindings_check'

Changes in V2:
- Updated bindings by adding more information related to required
LINFlexD clocks

Ciprian Marian Costea (2):
  dt-bindings: serial: fsl-linflexuart: add clock definitions
  serial: fsl_linflexuart: add clock management

 .../bindings/serial/fsl,s32-linflexuart.yaml  | 16 ++++
 drivers/tty/serial/fsl_linflexuart.c          | 95 ++++++++++++++++---
 2 files changed, 97 insertions(+), 14 deletions(-)