Show patches with: Submitter = Frank Li       |    Archived = No       |   704 patches
« 1 2 3 4 … 7 8 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,3/4] arm64: dts: imx8qxp-mek: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[v2,2/4] arm64: dts: imx8dxl-evk: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number [1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number - - - --- 2024-10-02 Frank Li Superseded
[4/4] arm64: dts: imx8qm-mek: Add PCIe and sata [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[3/4] arm64: dts: imx8qxp-mek: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[2/4] arm64: dts: imx8dxl-evk: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[1/4] arm64: dts: imx8-ss-hsio: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[3/3] i3c: master: Fix dynamic address leak when 'assigned-address' is present I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-01 Frank Li Superseded
[2/3] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-01 Frank Li Superseded
[1/3] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-01 Frank Li Superseded
[v5,6/6] i3c: master: svc: fix possible assignment of the same address to two devices I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,5/6] i3c: master: svc: wait for Manual ACK/NACK Done before next step I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,4/6] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work() I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,3/6] i3c: master: svc: need check IBIWON for dynamtica address assign I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,2/6] i3c: master: svc: manually emit NACK/ACK for hotjoin I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,1/6] i3c: master: svc: use repeat start when IBI WIN happens I3C: master: svc: collect all patches to improve hotjoin stability 1 - - --- 2024-10-01 Frank Li Superseded
[6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2 [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and deconde [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec [1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec - - - --- 2024-09-30 Frank Li Superseded
[v2,2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge - - - --- 2024-09-30 Frank Li Superseded
[v2,1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge - - - --- 2024-09-30 Frank Li Superseded
[v3,3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-30 Frank Li Superseded
[v3,2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-30 Frank Li Superseded
[v3,1/3] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-09-30 Frank Li Superseded
[2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 PCI: add enabe(disable)_device() hook for bridge - - - --- 2024-09-26 Frank Li Superseded
[1/2] PCI: Add enable_device() and disable_device() callbacks for bridges PCI: add enabe(disable)_device() hook for bridge - - - --- 2024-09-26 Frank Li Superseded
[v2,3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-26 Frank Li Superseded
[v2,2/3] PCI: dwc: Using cpu_untranslate_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-26 Frank Li Superseded
[v2,1/3] of: address: Add cpu_untranslate_addr to struct of_pci_range PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-09-26 Frank Li Superseded
[3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-09-24 Frank Li Superseded
[2/3] PCI: dwc: Using for_each_of_range_untranslate to elminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-24 Frank Li Superseded
[1/3] of: address: Add helper function to get untranslated 'ranges' information PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-09-24 Frank Li Superseded
[v2,4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-09-23 Frank Li Superseded
[v2,3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - 2 - --- 2024-09-23 Frank Li Superseded
[v2,2/4] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices 1 - - --- 2024-09-23 Frank Li Superseded
[v2,1/4] PCI: dwc: ep: Add bus_addr_base for outbound window PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices - - - --- 2024-09-23 Frank Li Superseded
[9/9] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[8/9] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext() PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[7/9] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[6/9] PCI: dwc: ep: Use 'ranges' from DT if 'addr_space' is missing PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[5/9] PCI: dwc: ep: Replace phys_base and addr_size with range PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[4/9] dt-bindings: PCI: snps,dw-pcie-ep: 'addr_space' not required if 'ranges' present PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[3/9] of: address: Add device type pci-ep PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[2/9] of: address: Add argument 'name' for of_node_is_pcie() PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[1/9] dt-bindings: PCI: pci-ep: Document 'ranges' property PCI-EP: Add 'ranges' support for PCI endpoint devices - - - --- 2024-09-19 Frank Li Superseded
[v6,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v6,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-09-17 Frank Li Superseded
[v3,3/3] pwm: imx27: Add optional 32k clock for pwm in i.MX8QXP MIPI subsystem pwm: imx: add 32k clock for 8qm/qxp - - - --- 2024-09-10 Frank Li New
[v3,1/3] dt-bindings: pwm: imx: Add optional clock '32k' pwm: imx: add 32k clock for 8qm/qxp 1 - - --- 2024-09-10 Frank Li New
[v5,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v5,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-09-10 Frank Li Superseded
[v4,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v4,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-09-09 Frank Li Superseded
[1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file [1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file - - - --- 2024-09-05 Frank Li Superseded
[v4,3/3] usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep usb: imx8mp: collect some improvement 1 1 - --- 2024-09-05 Frank Li Superseded
[v4,2/3] usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode usb: imx8mp: collect some improvement 1 - - --- 2024-09-05 Frank Li Superseded
[v4,1/3] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk usb: imx8mp: collect some improvement - - - --- 2024-09-05 Frank Li Superseded
[v3,3/3] usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep usb: imx8mp: collect some improvement 1 1 - --- 2024-09-04 Frank Li Superseded
[v3,2/3] usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode usb: imx8mp: collect some improvement 1 - - --- 2024-09-04 Frank Li Superseded
[v3,1/3] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk usb: imx8mp: collect some improvement - - - --- 2024-09-04 Frank Li Superseded
[v3,1/1] dt-bindings: memory-controllers: fsl,ifc: add compatible string fsl,ifc-nand [v3,1/1] dt-bindings: memory-controllers: fsl,ifc: add compatible string fsl,ifc-nand - - - --- 2024-08-30 Frank Li Superseded
[v4,11/11] i3c: master: svc: fix possible assignment of the same address to two devices i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-29 Frank Li Superseded
[v4,10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-29 Frank Li Superseded
[v4,09/11] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work() i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-29 Frank Li Superseded
[v4,08/11] i3c: master: svc: need check IBIWON for dynamtica address assign i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-29 Frank Li Superseded
[v4,07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-29 Frank Li Superseded
[v4,06/11] i3c: master: svc: use repeat start when IBI WIN happens i3c: master: some fix and improvemnt for hotjoin 1 - - --- 2024-08-29 Frank Li Superseded
[v4,05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-29 Frank Li Superseded
[v4,04/11] i3c: master: Fix dynamic address leak when 'assigned-address' is present i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-29 Frank Li Superseded
[v4,03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-29 Frank Li Superseded
[v4,02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-29 Frank Li Superseded
[v4,01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-29 Frank Li Superseded
[v4,1/1] dt-bindings: hwmon: Convert ltc2978.txt to yaml [v4,1/1] dt-bindings: hwmon: Convert ltc2978.txt to yaml - - - --- 2024-08-28 Frank Li Superseded
[v2,1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent [v2,1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent - 1 - --- 2024-08-28 Frank Li Superseded
[1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent [1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent - - - --- 2024-08-27 Frank Li Superseded
[v2,3/3] arm64: dts: imx93-11x11-evk: Enable sound-wm8962 sound card [v2,1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - - - --- 2024-08-27 Frank Li Superseded
[v2,2/3] arm64: dts: imx93-11x11-evk: add flexcan support [v2,1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - 1 - --- 2024-08-27 Frank Li Superseded
[v2,1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 [v2,1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - - - --- 2024-08-27 Frank Li Superseded
[3/3] arm64: dts: imx93-11x11-evk: Enable sound-wm8962 sound card [1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - - - --- 2024-08-26 Frank Li Superseded
[2/3] arm64: dts: imx93-11x11-evk: add flexcan support [1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - 1 - --- 2024-08-26 Frank Li Superseded
[1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 [1/3] arm64: dts: imx93-11x11-evk: add io-expander adi,adp5585-00 - - - --- 2024-08-26 Frank Li Superseded
[v3,1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml [v3,1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml - - - --- 2024-08-26 Frank Li Superseded
[2/2] drm/panel: simple: Add support for JDI TX26D202VM0BWA panel drm/panel: simple: Add support for JDI TX26D202VM0BWA panel - - - --- 2024-08-21 Frank Li Not Applicable
[1/2] dt-bindings: display: panel-simple-lvds-dual-ports: add jdi,tx26d202vm0bwa drm/panel: simple: Add support for JDI TX26D202VM0BWA panel - - - --- 2024-08-21 Frank Li Not Applicable
[v2,3/3] usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep usb: imx8mp: collect some improvement 1 1 - --- 2024-08-21 Frank Li Superseded
[v2,2/3] usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode usb: imx8mp: collect some improvement - - - --- 2024-08-21 Frank Li Superseded
[v2,1/3] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk usb: imx8mp: collect some improvement - - - --- 2024-08-21 Frank Li Superseded
[1/1] MAINTAINERS: misc: update fsl,qoriq-mc.txt to fsl,qoriq-mc.yaml [1/1] MAINTAINERS: misc: update fsl,qoriq-mc.txt to fsl,qoriq-mc.yaml - - - --- 2024-08-20 Frank Li New
[v2,1/1] dt-bindings: leds: convert leds-lm3692x to yaml format [v2,1/1] dt-bindings: leds: convert leds-lm3692x to yaml format - - - --- 2024-08-20 Frank Li Superseded
[v5,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml [v5,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml - 2 - --- 2024-08-20 Frank Li Superseded
[v2,1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml [v2,1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml - - - --- 2024-08-19 Frank Li Superseded
[v3,1/1] dt-bindings: extcon: ptn5150: add child node port [v3,1/1] dt-bindings: extcon: ptn5150: add child node port - - - --- 2024-08-19 Frank Li Superseded
[v4,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml [v4,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml - 1 - --- 2024-08-19 Frank Li Superseded
[v3,11/11] i3c: master: svc: fix possible assignment of the same address to two devices i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-19 Frank Li Superseded
[v3,10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-19 Frank Li Superseded
[v3,09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work() i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-19 Frank Li Superseded
[v3,08/11] i3c: master: svc: need check IBIWON for dynamtica address assign i3c: master: some fix and improvemnt for hotjoin - - - --- 2024-08-19 Frank Li Superseded
[v3,07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin i3c: master: some fix and improvemnt for hotjoin - 1 - --- 2024-08-19 Frank Li Superseded
[v3,06/11] i3c: master: svc: use repeat start when IBI WIN happens i3c: master: some fix and improvemnt for hotjoin 1 - - --- 2024-08-19 Frank Li Superseded
« 1 2 3 4 … 7 8 »