From patchwork Thu Jul 11 08:11:56 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hongxing Zhu X-Patchwork-Id: 13730242 Received: from inva020.nxp.com (inva020.nxp.com [92.121.34.13]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 89BFD155CA5 for ; Thu, 11 Jul 2024 08:30:13 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=92.121.34.13 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720686617; cv=none; b=Dia/3CXxLpXWJBDyFJYooD/zbykkHKelXju/L5191UZrivISnALdKf8x7mCceEpM52WDJKj8/dZ4Gz6FJgPYZXjX/3yrgrWd/mSFhFw0bH79qULA135VAL7CDSHCQm4Yy+ot5errec98M6dSnXqN0X1KN1kGGcAaoUhmFX73ovA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720686617; c=relaxed/simple; bh=T6QxeXNOG7mGRftu8TEzDtC1WY+dE3pSY91xYKJ06AM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References; b=kI+BRr/QuRyEkrg58xshkPK32+YP8rrl28Gmm+ZqJ7t1vrldX1Cq3876fnJ+qE+T8L6jfIExxLFDGB0rjSibMh/Q1Kr6gqsX8+60Fym+aR/pQrtTOxrIeek21t6JKLmhFgRA+yB43RwGx/D6UJVIkK+zBZQheIuwmAhbggYVk2Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; arc=none smtp.client-ip=92.121.34.13 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 16D751A1BE8; Thu, 11 Jul 2024 10:30:12 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id AE1B91A1BEA; Thu, 11 Jul 2024 10:30:11 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id C83C3183487B; Thu, 11 Jul 2024 16:30:09 +0800 (+08) From: Richard Zhu To: tj@kernel.org, dlemoal@kernel.org, cassel@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com Cc: linux-ide@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev, kernel@pengutronix.de, Richard Zhu Subject: [PATCH v1 2/4] ata: ahci_imx: Clean up code by using i.MX8Q HSIO PHY driver Date: Thu, 11 Jul 2024 16:11:56 +0800 Message-Id: <1720685518-20190-3-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1720685518-20190-1-git-send-email-hongxing.zhu@nxp.com> References: <1720685518-20190-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk X-Mailing-List: imx@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: Clean up code by using PHY interface. Signed-off-by: Richard Zhu --- drivers/ata/ahci_imx.c | 394 ++++++++++------------------------------- 1 file changed, 98 insertions(+), 296 deletions(-) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index cb768f66f0a70..0e9fddd02ee5f 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "ahci.h" @@ -44,42 +45,6 @@ enum { /* Clock Reset Register */ IMX_CLOCK_RESET = 0x7f3f, IMX_CLOCK_RESET_RESET = 1 << 0, - /* IMX8QM HSIO AHCI definitions */ - IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET = 0x03, - IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET = 0x09, - IMX8QM_SATA_PHY_IMPED_RATIO_85OHM = 0x6c, - IMX8QM_LPCG_PHYX2_OFFSET = 0x00000, - IMX8QM_CSR_PHYX2_OFFSET = 0x90000, - IMX8QM_CSR_PHYX1_OFFSET = 0xa0000, - IMX8QM_CSR_PHYX_STTS0_OFFSET = 0x4, - IMX8QM_CSR_PCIEA_OFFSET = 0xb0000, - IMX8QM_CSR_PCIEB_OFFSET = 0xc0000, - IMX8QM_CSR_SATA_OFFSET = 0xd0000, - IMX8QM_CSR_PCIE_CTRL2_OFFSET = 0x8, - IMX8QM_CSR_MISC_OFFSET = 0xe0000, - - IMX8QM_LPCG_PHYX2_PCLK0_MASK = (0x3 << 16), - IMX8QM_LPCG_PHYX2_PCLK1_MASK = (0x3 << 20), - IMX8QM_PHY_APB_RSTN_0 = BIT(0), - IMX8QM_PHY_MODE_SATA = BIT(19), - IMX8QM_PHY_MODE_MASK = (0xf << 17), - IMX8QM_PHY_PIPE_RSTN_0 = BIT(24), - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0 = BIT(25), - IMX8QM_PHY_PIPE_RSTN_1 = BIT(26), - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1 = BIT(27), - IMX8QM_STTS0_LANE0_TX_PLL_LOCK = BIT(4), - IMX8QM_MISC_IOB_RXENA = BIT(0), - IMX8QM_MISC_IOB_TXENA = BIT(1), - IMX8QM_MISC_PHYX1_EPCS_SEL = BIT(12), - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 = BIT(24), - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 = BIT(25), - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 = BIT(28), - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0 = BIT(29), - IMX8QM_SATA_CTRL_RESET_N = BIT(12), - IMX8QM_SATA_CTRL_EPCS_PHYRESET_N = BIT(7), - IMX8QM_CTRL_BUTTON_RST_N = BIT(21), - IMX8QM_CTRL_POWER_UP_RST_N = BIT(23), - IMX8QM_CTRL_LTSSM_ENABLE = BIT(4), }; enum ahci_imx_type { @@ -95,14 +60,10 @@ struct imx_ahci_priv { struct clk *sata_clk; struct clk *sata_ref_clk; struct clk *ahb_clk; - struct clk *epcs_tx_clk; - struct clk *epcs_rx_clk; - struct clk *phy_apbclk; - struct clk *phy_pclk0; - struct clk *phy_pclk1; - void __iomem *phy_base; - struct gpio_desc *clkreq_gpiod; struct regmap *gpr; + struct phy *sata_phy; + struct phy *cali_phy0; + struct phy *cali_phy1; bool no_device; bool first_time; u32 phy_params; @@ -450,201 +411,73 @@ ATTRIBUTE_GROUPS(fsl_sata_ahci); static int imx8_sata_enable(struct ahci_host_priv *hpriv) { - u32 val, reg; - int i, ret; + u32 val; + int ret; struct imx_ahci_priv *imxpriv = hpriv->plat_data; struct device *dev = &imxpriv->ahci_pdev->dev; - /* configure the hsio for sata */ - ret = clk_prepare_enable(imxpriv->phy_pclk0); - if (ret < 0) { - dev_err(dev, "can't enable phy_pclk0.\n"); + /* + * Since "REXT" pin is only present for first lane of i.MX8QM + * PHY, it's calibration results will be stored, passed + * through second lane PHY, and shared with all three lane PHYs. + * + * Initialize the first two lane PHYs here, although only the + * third lane PHY is used by SATA. + */ + ret = phy_init(imxpriv->cali_phy0); + if (ret) { + dev_err(dev, "cali PHY init failed\n"); return ret; } - ret = clk_prepare_enable(imxpriv->phy_pclk1); - if (ret < 0) { - dev_err(dev, "can't enable phy_pclk1.\n"); - goto disable_phy_pclk0; + ret = phy_power_on(imxpriv->cali_phy0); + if (ret) { + dev_err(dev, "cali PHY power on failed\n"); + goto err_cali_phy0_power_on; } - ret = clk_prepare_enable(imxpriv->epcs_tx_clk); - if (ret < 0) { - dev_err(dev, "can't enable epcs_tx_clk.\n"); - goto disable_phy_pclk1; + ret = phy_init(imxpriv->cali_phy1); + if (ret) { + dev_err(dev, "cali PHY1 init failed\n"); + goto err_cali_phy1_init; } - ret = clk_prepare_enable(imxpriv->epcs_rx_clk); - if (ret < 0) { - dev_err(dev, "can't enable epcs_rx_clk.\n"); - goto disable_epcs_tx_clk; + ret = phy_power_on(imxpriv->cali_phy1); + if (ret) { + dev_err(dev, "cali PHY1 power on failed\n"); + goto err_cali_phy1_power_on; } - ret = clk_prepare_enable(imxpriv->phy_apbclk); - if (ret < 0) { - dev_err(dev, "can't enable phy_apbclk.\n"); - goto disable_epcs_rx_clk; + ret = phy_init(imxpriv->sata_phy); + if (ret) { + dev_err(dev, "sata PHY init failed\n"); + goto err_sata_phy_init; } - /* Configure PHYx2 PIPE_RSTN */ - regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEA_OFFSET + - IMX8QM_CSR_PCIE_CTRL2_OFFSET, &val); - if ((val & IMX8QM_CTRL_LTSSM_ENABLE) == 0) { - /* The link of the PCIEA of HSIO is down */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_PHYX2_OFFSET, - IMX8QM_PHY_PIPE_RSTN_0 | - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0, - IMX8QM_PHY_PIPE_RSTN_0 | - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0); + ret = phy_set_mode(imxpriv->sata_phy, PHY_MODE_SATA); + if (ret) { + dev_err(dev, "unable to set SATA PHY mode\n"); + goto err_sata_phy_power_on; } - regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEB_OFFSET + - IMX8QM_CSR_PCIE_CTRL2_OFFSET, ®); - if ((reg & IMX8QM_CTRL_LTSSM_ENABLE) == 0) { - /* The link of the PCIEB of HSIO is down */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_PHYX2_OFFSET, - IMX8QM_PHY_PIPE_RSTN_1 | - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1, - IMX8QM_PHY_PIPE_RSTN_1 | - IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1); + ret = phy_power_on(imxpriv->sata_phy); + if (ret) { + dev_err(dev, "sata PHY power up failed\n"); + goto err_sata_phy_power_on; } - if (((reg | val) & IMX8QM_CTRL_LTSSM_ENABLE) == 0) { - /* The links of both PCIA and PCIEB of HSIO are down */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_LPCG_PHYX2_OFFSET, - IMX8QM_LPCG_PHYX2_PCLK0_MASK | - IMX8QM_LPCG_PHYX2_PCLK1_MASK, - 0); - } - - /* set PWR_RST and BT_RST of csr_pciea */ - val = IMX8QM_CSR_PCIEA_OFFSET + IMX8QM_CSR_PCIE_CTRL2_OFFSET; - regmap_update_bits(imxpriv->gpr, - val, - IMX8QM_CTRL_BUTTON_RST_N, - IMX8QM_CTRL_BUTTON_RST_N); - regmap_update_bits(imxpriv->gpr, - val, - IMX8QM_CTRL_POWER_UP_RST_N, - IMX8QM_CTRL_POWER_UP_RST_N); - - /* PHYX1_MODE to SATA */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_PHYX1_OFFSET, - IMX8QM_PHY_MODE_MASK, - IMX8QM_PHY_MODE_SATA); - /* - * BIT0 RXENA 1, BIT1 TXENA 0 - * BIT12 PHY_X1_EPCS_SEL 1. - */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_MISC_OFFSET, - IMX8QM_MISC_IOB_RXENA, - IMX8QM_MISC_IOB_RXENA); - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_MISC_OFFSET, - IMX8QM_MISC_IOB_TXENA, - 0); - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_MISC_OFFSET, - IMX8QM_MISC_PHYX1_EPCS_SEL, - IMX8QM_MISC_PHYX1_EPCS_SEL); - /* - * It is possible, for PCIe and SATA are sharing - * the same clock source, HPLL or external oscillator. - * When PCIe is in low power modes (L1.X or L2 etc), - * the clock source can be turned off. In this case, - * if this clock source is required to be toggling by - * SATA, then SATA functions will be abnormal. - * Set the override here to avoid it. - */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_MISC_OFFSET, - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 | - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 | - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 | - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0, - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 | - IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 | - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 | - IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0); - - /* clear PHY RST, then set it */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_SATA_OFFSET, - IMX8QM_SATA_CTRL_EPCS_PHYRESET_N, - 0); - - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_SATA_OFFSET, - IMX8QM_SATA_CTRL_EPCS_PHYRESET_N, - IMX8QM_SATA_CTRL_EPCS_PHYRESET_N); - - /* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_SATA_OFFSET, - IMX8QM_SATA_CTRL_RESET_N, - IMX8QM_SATA_CTRL_RESET_N); - udelay(1); - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_SATA_OFFSET, - IMX8QM_SATA_CTRL_RESET_N, - 0); - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_SATA_OFFSET, - IMX8QM_SATA_CTRL_RESET_N, - IMX8QM_SATA_CTRL_RESET_N); - - /* APB reset */ - regmap_update_bits(imxpriv->gpr, - IMX8QM_CSR_PHYX1_OFFSET, - IMX8QM_PHY_APB_RSTN_0, - IMX8QM_PHY_APB_RSTN_0); - - for (i = 0; i < 100; i++) { - reg = IMX8QM_CSR_PHYX1_OFFSET + - IMX8QM_CSR_PHYX_STTS0_OFFSET; - regmap_read(imxpriv->gpr, reg, &val); - val &= IMX8QM_STTS0_LANE0_TX_PLL_LOCK; - if (val == IMX8QM_STTS0_LANE0_TX_PLL_LOCK) - break; - udelay(1); - } + /* The cali_phy# can be turned off after SATA PHY is initialized. */ + phy_power_off(imxpriv->cali_phy1); + phy_exit(imxpriv->cali_phy1); + phy_power_off(imxpriv->cali_phy0); + phy_exit(imxpriv->cali_phy0); - if (val != IMX8QM_STTS0_LANE0_TX_PLL_LOCK) { - dev_err(dev, "TX PLL of the PHY is not locked\n"); - ret = -ENODEV; - } else { - writeb(imxpriv->imped_ratio, imxpriv->phy_base + - IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET); - writeb(imxpriv->imped_ratio, imxpriv->phy_base + - IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET); - reg = readb(imxpriv->phy_base + - IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET); - if (unlikely(reg != imxpriv->imped_ratio)) - dev_info(dev, "Can't set PHY RX impedance ratio.\n"); - reg = readb(imxpriv->phy_base + - IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET); - if (unlikely(reg != imxpriv->imped_ratio)) - dev_info(dev, "Can't set PHY TX impedance ratio.\n"); - usleep_range(50, 100); - - /* - * To reduce the power consumption, gate off - * the PHY clks - */ - clk_disable_unprepare(imxpriv->phy_apbclk); - clk_disable_unprepare(imxpriv->phy_pclk1); - clk_disable_unprepare(imxpriv->phy_pclk0); - return ret; - } + return 0; - clk_disable_unprepare(imxpriv->phy_apbclk); -disable_epcs_rx_clk: - clk_disable_unprepare(imxpriv->epcs_rx_clk); -disable_epcs_tx_clk: - clk_disable_unprepare(imxpriv->epcs_tx_clk); -disable_phy_pclk1: - clk_disable_unprepare(imxpriv->phy_pclk1); -disable_phy_pclk0: - clk_disable_unprepare(imxpriv->phy_pclk0); +err_sata_phy_power_on: + phy_exit(imxpriv->sata_phy); +err_sata_phy_init: + phy_power_off(imxpriv->cali_phy1); +err_cali_phy1_power_on: + phy_exit(imxpriv->cali_phy1); +err_cali_phy1_init: + phy_power_off(imxpriv->cali_phy0); +err_cali_phy0_power_on: + phy_exit(imxpriv->cali_phy0); return ret; } @@ -698,6 +531,9 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) } } else if (imxpriv->type == AHCI_IMX8QM) { ret = imx8_sata_enable(hpriv); + if (ret) + goto disable_clk; + } usleep_range(1000, 2000); @@ -736,8 +572,10 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv) break; case AHCI_IMX8QM: - clk_disable_unprepare(imxpriv->epcs_rx_clk); - clk_disable_unprepare(imxpriv->epcs_tx_clk); + if (imxpriv->sata_phy) { + phy_power_off(imxpriv->sata_phy); + phy_exit(imxpriv->sata_phy); + } break; default: @@ -760,6 +598,9 @@ static void ahci_imx_error_handler(struct ata_port *ap) ahci_error_handler(ap); + if (imxpriv->type == AHCI_IMX8QM) + return; + if (!(imxpriv->first_time) || ahci_imx_hotplug) return; @@ -986,65 +827,24 @@ static const struct scsi_host_template ahci_platform_sht = { static int imx8_sata_probe(struct device *dev, struct imx_ahci_priv *imxpriv) { - struct resource *phy_res; - struct platform_device *pdev = imxpriv->ahci_pdev; - struct device_node *np = dev->of_node; - - if (of_property_read_u32(np, "fsl,phy-imp", &imxpriv->imped_ratio)) - imxpriv->imped_ratio = IMX8QM_SATA_PHY_IMPED_RATIO_85OHM; - phy_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); - if (phy_res) { - imxpriv->phy_base = devm_ioremap(dev, phy_res->start, - resource_size(phy_res)); - if (!imxpriv->phy_base) { - dev_err(dev, "error with ioremap\n"); - return -ENOMEM; - } - } else { - dev_err(dev, "missing *phy* reg region.\n"); - return -ENOMEM; - } - imxpriv->gpr = - syscon_regmap_lookup_by_phandle(np, "hsio"); - if (IS_ERR(imxpriv->gpr)) { - dev_err(dev, "unable to find gpr registers\n"); - return PTR_ERR(imxpriv->gpr); - } - - imxpriv->epcs_tx_clk = devm_clk_get(dev, "epcs_tx"); - if (IS_ERR(imxpriv->epcs_tx_clk)) { - dev_err(dev, "can't get epcs_tx_clk clock.\n"); - return PTR_ERR(imxpriv->epcs_tx_clk); - } - imxpriv->epcs_rx_clk = devm_clk_get(dev, "epcs_rx"); - if (IS_ERR(imxpriv->epcs_rx_clk)) { - dev_err(dev, "can't get epcs_rx_clk clock.\n"); - return PTR_ERR(imxpriv->epcs_rx_clk); - } - imxpriv->phy_pclk0 = devm_clk_get(dev, "phy_pclk0"); - if (IS_ERR(imxpriv->phy_pclk0)) { - dev_err(dev, "can't get phy_pclk0 clock.\n"); - return PTR_ERR(imxpriv->phy_pclk0); - } - imxpriv->phy_pclk1 = devm_clk_get(dev, "phy_pclk1"); - if (IS_ERR(imxpriv->phy_pclk1)) { - dev_err(dev, "can't get phy_pclk1 clock.\n"); - return PTR_ERR(imxpriv->phy_pclk1); - } - imxpriv->phy_apbclk = devm_clk_get(dev, "phy_apbclk"); - if (IS_ERR(imxpriv->phy_apbclk)) { - dev_err(dev, "can't get phy_apbclk clock.\n"); - return PTR_ERR(imxpriv->phy_apbclk); + if (!(dev->bus_dma_limit)) { + dev->bus_dma_limit = DMA_BIT_MASK(32); + dev_dbg(dev, "imx8qm sata only supports 32bit dma.\n"); } - /* Fetch GPIO, then enable the external OSC */ - imxpriv->clkreq_gpiod = devm_gpiod_get_optional(dev, "clkreq", - GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); - if (IS_ERR(imxpriv->clkreq_gpiod)) - return PTR_ERR(imxpriv->clkreq_gpiod); - if (imxpriv->clkreq_gpiod) - gpiod_set_consumer_name(imxpriv->clkreq_gpiod, "SATA CLKREQ"); - + imxpriv->sata_phy = devm_phy_get(dev, "sata-phy"); + if (IS_ERR(imxpriv->sata_phy)) + return dev_err_probe(dev, PTR_ERR(imxpriv->sata_phy), + "failed to get sata_phy\n"); + + imxpriv->cali_phy0 = devm_phy_get(dev, "cali-phy0"); + if (IS_ERR(imxpriv->cali_phy0)) + return dev_err_probe(dev, PTR_ERR(imxpriv->cali_phy0), + "failed to get cali_phy0\n"); + imxpriv->cali_phy1 = devm_phy_get(dev, "cali-phy1"); + if (IS_ERR(imxpriv->cali_phy1)) + return dev_err_probe(dev, PTR_ERR(imxpriv->cali_phy1), + "failed to get cali_phy1\n"); return 0; } @@ -1077,12 +877,6 @@ static int imx_ahci_probe(struct platform_device *pdev) return PTR_ERR(imxpriv->sata_ref_clk); } - imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); - if (IS_ERR(imxpriv->ahb_clk)) { - dev_err(dev, "can't get ahb clock.\n"); - return PTR_ERR(imxpriv->ahb_clk); - } - if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) { u32 reg_value; @@ -1142,11 +936,8 @@ static int imx_ahci_probe(struct platform_device *pdev) goto disable_clk; /* - * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, - * and IP vendor specific register IMX_TIMER1MS. - * Configure CAP_SSS (support stagered spin up). - * Implement the port0. - * Get the ahb clock rate, and configure the TIMER1MS register. + * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL. + * Set CAP_SSS (support stagered spin up) and Implement the port0. */ reg_val = readl(hpriv->mmio + HOST_CAP); if (!(reg_val & HOST_CAP_SSS)) { @@ -1159,8 +950,19 @@ static int imx_ahci_probe(struct platform_device *pdev) writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL); } - reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; - writel(reg_val, hpriv->mmio + IMX_TIMER1MS); + if (imxpriv->type != AHCI_IMX8QM) { + /* + * Get AHB clock rate and configure the vendor specified + * TIMER1MS register on i.MX53, i.MX6Q and i.MX6QP only. + */ + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(imxpriv->ahb_clk)) { + dev_err(dev, "can't get ahb clock.\n"); + goto disable_sata; + } + reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; + writel(reg_val, hpriv->mmio + IMX_TIMER1MS); + } ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, &ahci_platform_sht);