diff mbox series

[v3,2/3] regulator: pca9450: add pca9451a support

Message ID 20240311113201.664252-3-joy.zou@nxp.com (mailing list archive)
State Superseded
Headers show
Series add pmic pca9451a support | expand

Commit Message

Joy Zou March 11, 2024, 11:32 a.m. UTC
Adding support for new pmic pca9451a.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
1. remove not related change.
2. delete unnecessary empty line.
3. modify commit message.

Changes in v2:
1. remove the old part support because the old part only is used for sample
and is diffcult to distinguish old and new part. so drop old part.
2. remove the unnecessary marco definition in the file pca9450.h.
---
 drivers/regulator/pca9450-regulator.c | 194 +++++++++++++++++++++++++-
 include/linux/regulator/pca9450.h     |   1 +
 2 files changed, 193 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2ab365d2749f..242ff25f5b83 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -106,6 +106,14 @@  static const struct linear_range pca9450_dvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(600000,  0x00, 0x7F, 12500),
 };
 
+/*
+ * BUCK1/3
+ * 0.65 to 2.2375V (12.5mV step)
+ */
+static const struct linear_range pca9451a_dvs_buck_volts[] = {
+	REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500),
+};
+
 /*
  * BUCK4/5/6
  * 0.6V to 3.4V (25mV step)
@@ -662,6 +670,178 @@  static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 	},
 };
 
+static const struct pca9450_regulator_desc pca9451a_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK1,
+			.ops = &pca9450_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+			.linear_ranges = pca9451a_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+			.vsel_mask = BUCK1OUT_DVS0_MASK,
+			.enable_reg = PCA9450_REG_BUCK1CTRL,
+			.enable_mask = BUCK1_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+			.owner = THIS_MODULE,
+			.of_parse_cb = pca9450_set_dvs_levels,
+		},
+		.dvs = {
+			.run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+			.run_mask = BUCK1OUT_DVS0_MASK,
+			.standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+			.standby_mask = BUCK1OUT_DVS1_MASK,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK2,
+			.ops = &pca9450_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+			.linear_ranges = pca9450_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+			.vsel_mask = BUCK2OUT_DVS0_MASK,
+			.enable_reg = PCA9450_REG_BUCK2CTRL,
+			.enable_mask = BUCK2_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+			.owner = THIS_MODULE,
+			.of_parse_cb = pca9450_set_dvs_levels,
+		},
+		.dvs = {
+			.run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+			.run_mask = BUCK2OUT_DVS0_MASK,
+			.standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+			.standby_mask = BUCK2OUT_DVS1_MASK,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK4,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK4OUT,
+			.vsel_mask = BUCK4OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK4CTRL,
+			.enable_mask = BUCK4_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK5,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK5OUT,
+			.vsel_mask = BUCK5OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK5CTRL,
+			.enable_mask = BUCK5_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK6,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK6OUT,
+			.vsel_mask = BUCK6OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK6CTRL,
+			.enable_mask = BUCK6_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO1,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+			.vsel_reg = PCA9450_REG_LDO1CTRL,
+			.vsel_mask = LDO1OUT_MASK,
+			.enable_reg = PCA9450_REG_LDO1CTRL,
+			.enable_mask = LDO1_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO4,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo34_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+			.vsel_reg = PCA9450_REG_LDO4CTRL,
+			.vsel_mask = LDO4OUT_MASK,
+			.enable_reg = PCA9450_REG_LDO4CTRL,
+			.enable_mask = LDO4_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO5,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
+			.vsel_mask = LDO5HOUT_MASK,
+			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_mask = LDO5H_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+};
+
 static irqreturn_t pca9450_irq_handler(int irq, void *data)
 {
 	struct pca9450 *pca9450 = data;
@@ -729,6 +909,10 @@  static int pca9450_i2c_probe(struct i2c_client *i2c)
 		regulator_desc = pca9450bc_regulators;
 		pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
 		break;
+	case PCA9450_TYPE_PCA9451A:
+		regulator_desc = pca9451a_regulators;
+		pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators);
+		break;
 	default:
 		dev_err(&i2c->dev, "Unknown device type");
 		return -EINVAL;
@@ -755,7 +939,8 @@  static int pca9450_i2c_probe(struct i2c_client *i2c)
 
 	/* Check your board and dts for match the right pmic */
 	if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
-	    ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
+	    ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) ||
+	    ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) {
 		dev_err(&i2c->dev, "Device id(%x) mismatched\n",
 			device_id >> 4);
 		return -EINVAL;
@@ -846,7 +1031,8 @@  static int pca9450_i2c_probe(struct i2c_client *i2c)
 	}
 
 	dev_info(&i2c->dev, "%s probed.\n",
-		type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
+		type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
+		(type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));
 
 	return 0;
 }
@@ -864,6 +1050,10 @@  static const struct of_device_id pca9450_of_match[] = {
 		.compatible = "nxp,pca9450c",
 		.data = (void *)PCA9450_TYPE_PCA9450BC,
 	},
+	{
+		.compatible = "nxp,pca9451a",
+		.data = (void *)PCA9450_TYPE_PCA9451A,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pca9450_of_match);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 505c908dbb81..243633c8dceb 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -9,6 +9,7 @@ 
 enum pca9450_chip_type {
 	PCA9450_TYPE_PCA9450A = 0,
 	PCA9450_TYPE_PCA9450BC,
+	PCA9450_TYPE_PCA9451A,
 	PCA9450_TYPE_AMOUNT,
 };