diff mbox series

[3/3] arm64: dts: imx8ulp: add DSP node

Message ID 20240418203720.8492-4-laurentiumihalcea111@gmail.com (mailing list archive)
State Not Applicable
Headers show
Series Add DSP node for imx8ulp | expand

Commit Message

Laurentiu Mihalcea April 18, 2024, 8:37 p.m. UTC 
From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add node for i.MX8ULP's DSP core and its dependencies.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 39 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi    | 22 +++++++++++
 2 files changed, 61 insertions(+)

Comments

Frank Li April 18, 2024, 9:17 p.m. UTC | #1 
On Thu, Apr 18, 2024 at 11:37:20PM +0300, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> 
> Add node for i.MX8ULP's DSP core and its dependencies.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 39 +++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi    | 22 +++++++++++

8ulp.dtsi and imx8ulp-evk.dts need two patches. one for imx8ulp.dtsi, the
other for imx8ulp-evk.dts.

Frank

>  2 files changed, 61 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> index 24bb253b938d..5dadcbba370d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> @@ -67,6 +67,32 @@ vdevbuffer: vdevbuffer@a8400000 {
>  			reg = <0 0xa8400000 0 0x100000>;
>  			no-map;
>  		};
> +
> +		dsp_reserved: dsp_reserved@8e000000 {
> +			reg = <0 0x8e000000 0 0x1000000>;
> +			no-map;
> +		};
> +
> +		dsp_reserved_heap: dsp_reserved_heap@8f000000 {
> +			reg = <0 0x8f000000 0 0xef0000>;
> +			no-map;
> +		};
> +
> +		dsp_vdev0vring0: vdev0vring0@8fef0000 {
> +			reg = <0 0x8fef0000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		dsp_vdev0vring1: vdev0vring1@8fef8000 {
> +			reg = <0 0x8fef8000 0 0x8000>;
> +			no-map;
> +		};
> +
> +		dsp_vdev0buffer: vdev0buffer@8ff00000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x8ff00000 0 0x100000>;
> +			no-map;
> +		};
>  	};
>  
>  	clock_ext_rmii: clock-ext-rmii {
> @@ -95,6 +121,15 @@ &cm33 {
>  	status = "okay";
>  };
>  
> +&dsp {
> +	assigned-clocks = <&cgc2 IMX8ULP_CLK_HIFI_SEL>, <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>;
> +	assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD0>;
> +	assigned-clock-rates = <0>, <475200000>;
> +	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
> +			<&dsp_vdev0vring1>, <&dsp_reserved>;
> +	status = "okay";
> +};
> +
>  &flexspi2 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
> @@ -176,6 +211,10 @@ &mu {
>  	status = "okay";
>  };
>  
> +&mu3 {
> +	status = "okay";
> +};
> +
>  &iomuxc1 {
>  	pinctrl_enet: enetgrp {
>  		fsl,pins = <
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index c4a0082f30d3..99ed8c1ee57c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -198,6 +198,22 @@ soc: soc@0 {
>  		ranges = <0x0 0x0 0x0 0x40000000>,
>  			 <0x60000000 0x0 0x60000000 0x1000000>;
>  
> +		dsp: dsp@21170000 {
> +			compatible = "fsl,imx8ulp-hifi4";
> +			reg = <0x21170000 0x20000>;
> +			clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>,
> +				 <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>,
> +				 <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>,
> +				 <&pcc5 IMX8ULP_CLK_MU3_B>;
> +			clock-names = "ipg", "ocram", "core", "mu";
> +			power-domains = <&scmi_devpd IMX8ULP_PD_HIFI4>;
> +			firmware-name = "imx/dsp/hifi4.bin";
> +			mbox-names = "tx", "rx", "rxdb";
> +			mboxes = <&mu3 0 0>, <&mu3 1 0>, <&mu3 3 0>;
> +			fsl,dsp-ctrl = <&avd_sim>;
> +			status = "disabled";
> +		};
> +
>  		s4muap: mailbox@27020000 {
>  			compatible = "fsl,imx8ulp-mu-s4";
>  			reg = <0x27020000 0x10000>;
> @@ -520,6 +536,12 @@ per_bridge5: bus@2d800000 {
>  			#size-cells = <1>;
>  			ranges;
>  
> +			avd_sim: syscon@2da50000 {
> +				compatible = "fsl,imx8ulp-avd-sim", "syscon", "simple-mfd";

Any driver actually use "fsl,imx8ulp-avd-sim"?

> +				reg = <0x2da50000 0x38>;
> +				clocks = <&pcc5 IMX8ULP_CLK_AVD_SIM>;
> +			};
> +
>  			cgc2: clock-controller@2da60000 {
>  				compatible = "fsl,imx8ulp-cgc2";
>  				reg = <0x2da60000 0x10000>;
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 24bb253b938d..5dadcbba370d 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -67,6 +67,32 @@  vdevbuffer: vdevbuffer@a8400000 {
 			reg = <0 0xa8400000 0 0x100000>;
 			no-map;
 		};
+
+		dsp_reserved: dsp_reserved@8e000000 {
+			reg = <0 0x8e000000 0 0x1000000>;
+			no-map;
+		};
+
+		dsp_reserved_heap: dsp_reserved_heap@8f000000 {
+			reg = <0 0x8f000000 0 0xef0000>;
+			no-map;
+		};
+
+		dsp_vdev0vring0: vdev0vring0@8fef0000 {
+			reg = <0 0x8fef0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@8fef8000 {
+			reg = <0 0x8fef8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@8ff00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x8ff00000 0 0x100000>;
+			no-map;
+		};
 	};
 
 	clock_ext_rmii: clock-ext-rmii {
@@ -95,6 +121,15 @@  &cm33 {
 	status = "okay";
 };
 
+&dsp {
+	assigned-clocks = <&cgc2 IMX8ULP_CLK_HIFI_SEL>, <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>;
+	assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD0>;
+	assigned-clock-rates = <0>, <475200000>;
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
 &flexspi2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
@@ -176,6 +211,10 @@  &mu {
 	status = "okay";
 };
 
+&mu3 {
+	status = "okay";
+};
+
 &iomuxc1 {
 	pinctrl_enet: enetgrp {
 		fsl,pins = <
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index c4a0082f30d3..99ed8c1ee57c 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -198,6 +198,22 @@  soc: soc@0 {
 		ranges = <0x0 0x0 0x0 0x40000000>,
 			 <0x60000000 0x0 0x60000000 0x1000000>;
 
+		dsp: dsp@21170000 {
+			compatible = "fsl,imx8ulp-hifi4";
+			reg = <0x21170000 0x20000>;
+			clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>,
+				 <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>,
+				 <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>,
+				 <&pcc5 IMX8ULP_CLK_MU3_B>;
+			clock-names = "ipg", "ocram", "core", "mu";
+			power-domains = <&scmi_devpd IMX8ULP_PD_HIFI4>;
+			firmware-name = "imx/dsp/hifi4.bin";
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu3 0 0>, <&mu3 1 0>, <&mu3 3 0>;
+			fsl,dsp-ctrl = <&avd_sim>;
+			status = "disabled";
+		};
+
 		s4muap: mailbox@27020000 {
 			compatible = "fsl,imx8ulp-mu-s4";
 			reg = <0x27020000 0x10000>;
@@ -520,6 +536,12 @@  per_bridge5: bus@2d800000 {
 			#size-cells = <1>;
 			ranges;
 
+			avd_sim: syscon@2da50000 {
+				compatible = "fsl,imx8ulp-avd-sim", "syscon", "simple-mfd";
+				reg = <0x2da50000 0x38>;
+				clocks = <&pcc5 IMX8ULP_CLK_AVD_SIM>;
+			};
+
 			cgc2: clock-controller@2da60000 {
 				compatible = "fsl,imx8ulp-cgc2";
 				reg = <0x2da60000 0x10000>;