diff mbox series

[4/4] arm64: dts: ls2160a: Change I2C clock name to ipg to fix DTB_CHECK warning

Message ID 20240531215017.1969431-4-Frank.Li@nxp.com (mailing list archive)
State In Next, archived
Headers show
Series [1/4] arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warning | expand

Commit Message

Frank Li May 31, 2024, 9:50 p.m. UTC
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c"
to fix below DTB_CHECK warning.
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dtb: i2c@2010000: clock-names:0: 'ipg' was expected

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 96055593204ab..7dc98cb0ffc93 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -745,7 +745,7 @@  i2c0: i2c@2000000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -761,7 +761,7 @@  i2c1: i2c@2010000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -777,7 +777,7 @@  i2c2: i2c@2020000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -793,7 +793,7 @@  i2c3: i2c@2030000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -809,7 +809,7 @@  i2c4: i2c@2040000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -825,7 +825,7 @@  i2c5: i2c@2050000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -841,7 +841,7 @@  i2c6: i2c@2060000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -857,7 +857,7 @@  i2c7: i2c@2070000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";