diff mbox series

[1/2] dt-bindings: soc: fsl: cpm_qe: convert to yaml format

Message ID 20240703-ls_qe_warning-v1-1-7fe4af5b0bb0@nxp.com (mailing list archive)
State In Next, archived
Headers show
Series dt-bindings: soc: fsl: convert fsl,qe to yaml | expand

Commit Message

Frank Li July 3, 2024, 4:49 p.m. UTC
Convert binding doc qe.txt to yaml format. Split it to
fsl,qe-firmware.yaml, fsl,qe-ic.yaml, fsl,qe-muram.yaml, fsl,qe-si.yaml
fsl,qe-siram.yaml, fsl,qe.yaml.

Additional Changes:
- Fix error in example.
- Change to low case for hex value.
- Remove fsl,qe-num-riscs and fsl,qe-snums from required list.
- Add #address-cell and #size-cell.
- Add interrupts description for qe-ic.
- Add compatible string fsl,ls1043-qe-si for fsl,qe-si.yaml
- Add compatible string fsl,ls1043-qe-siram for fsl,qe-siram.yaml
- Add child node for fsl,qe.yaml

Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000: failed to match any schema with compatible: ['fsl,qe', 'simple-bus']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000/qeic@80: failed to match any schema with compatible: ['fsl,qe-ic']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml   |  48 ++++++
 .../bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml         |  47 ++++++
 .../bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml      |  71 ++++++++
 .../bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml         |  40 +++++
 .../bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml      |  39 +++++
 .../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml | 148 +++++++++++++++++
 .../devicetree/bindings/soc/fsl/cpm_qe/qe.txt      | 178 ---------------------
 7 files changed, 393 insertions(+), 178 deletions(-)

Comments

Rob Herring (Arm) July 8, 2024, 4:04 p.m. UTC | #1
On Wed, 03 Jul 2024 12:49:39 -0400, Frank Li wrote:
> Convert binding doc qe.txt to yaml format. Split it to
> fsl,qe-firmware.yaml, fsl,qe-ic.yaml, fsl,qe-muram.yaml, fsl,qe-si.yaml
> fsl,qe-siram.yaml, fsl,qe.yaml.
> 
> Additional Changes:
> - Fix error in example.
> - Change to low case for hex value.
> - Remove fsl,qe-num-riscs and fsl,qe-snums from required list.
> - Add #address-cell and #size-cell.
> - Add interrupts description for qe-ic.
> - Add compatible string fsl,ls1043-qe-si for fsl,qe-si.yaml
> - Add compatible string fsl,ls1043-qe-siram for fsl,qe-siram.yaml
> - Add child node for fsl,qe.yaml
> 
> Fix below warning:
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
> arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000: failed to match any schema with compatible: ['fsl,qe', 'simple-bus']
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
> arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000/qeic@80: failed to match any schema with compatible: ['fsl,qe-ic']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml   |  48 ++++++
>  .../bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml         |  47 ++++++
>  .../bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml      |  71 ++++++++
>  .../bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml         |  40 +++++
>  .../bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml      |  39 +++++
>  .../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml | 148 +++++++++++++++++
>  .../devicetree/bindings/soc/fsl/cpm_qe/qe.txt      | 178 ---------------------
>  7 files changed, 393 insertions(+), 178 deletions(-)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
new file mode 100644
index 0000000000000..53b07d4edc773
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
@@ -0,0 +1,48 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Firmware Node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This node defines a firmware binary that is embedded in the device tree, for
+  the purpose of passing the firmware from bootloader to the kernel, or from
+  the hypervisor to the guest.
+
+  The firmware node itself contains the firmware binary contents, a compatible
+  property, and any firmware-specific properties.  The node should be placed
+  inside a QE node that needs it.  Doing so eliminates the need for a
+  fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+  should define an fsl,firmware-phandle property that points to the firmware node
+  in the first QE node.
+
+  The fsl,firmware property can be specified in the DTS (possibly using incbin)
+  or can be inserted by the boot loader at boot time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,qe-firmware
+
+  fsl,firmware:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      A standard property.  This property contains the firmware binary "blob".
+
+required:
+  - compatible
+  - fsl,firmware
+
+additionalProperties: false
+
+examples:
+  - |
+    qe-firmware {
+        compatible = "fsl,qe-firmware";
+        fsl,firmware = <0x70 0xcd 0x00 0x00 0x01 0x46 0x45>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
new file mode 100644
index 0000000000000..8267ad00727b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Interrupt Controller (IC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,qe-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: QE interrupt
+      - description: QE critical
+      - description: QE error
+    minItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80 {
+        compatible = "fsl,qe-ic";
+        reg = <0x80 0x80>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <95 2 0 0  94 2 0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
new file mode 100644
index 0000000000000..cf0f38dbbe0da
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
@@ -0,0 +1,71 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine Multi-User RAM (MURAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: Multi-User RAM (MURAM)
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe-muram
+      - const: fsl,cpm-muram
+
+  ranges:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, slave]
+
+
+patternProperties:
+  '^data\-only@[a-f0-9]+$':
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,qe-muram-data
+          - const: fsl,cpm-muram-data
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@10000 {
+        compatible = "fsl,qe-muram", "fsl,cpm-muram";
+        ranges = <0 0x00010000 0x0000c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        data-only@0{
+            compatible = "fsl,qe-muram-data",
+                         "fsl,cpm-muram-data";
+            reg = <0 0xc000>;
+        };
+     };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
new file mode 100644
index 0000000000000..8e58ab58c0633
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
@@ -0,0 +1,40 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block (SI)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The SI manages the routing of eight TDM lines to the QE block serial drivers,
+  the MCC and the UCCs, for receive and transmit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-si
+          - const: fsl,t1040-qe-si
+      - enum:
+          - fsl,t1040-qe-si
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    si@700 {
+        compatible = "fsl,t1040-qe-si";
+        reg = <0x700 0x80>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
new file mode 100644
index 0000000000000..cc4ed48d786c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
@@ -0,0 +1,39 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block RAM(SIRAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  store the routing entries of SI
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-siram
+          - const: fsl,t1040-qe-siram
+      - const: fsl,t1040-qe-siram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    siram@1000 {
+        compatible = "fsl,t1040-qe-siram";
+        reg = <0x1000 0x800>;
+    };
+
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml
new file mode 100644
index 0000000000000..89cdf5e1d0a8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml
@@ -0,0 +1,148 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module (QE)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This represents qe module that is installed on PowerQUICC II Pro.
+
+  NOTE:  This is an interim binding; it should be updated to fit
+  in with the CPM binding later in this document.
+
+  Basically, it is a bus of devices, that could act more or less
+  as a complete entity (UCC, USB etc ). All of them should be siblings on
+  the "root" qe node, using the common properties from there.
+  The description below applies to the qe of MPC8360 and
+  more nodes and properties would be extended in the future.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [QE, CPM, CPM2]
+
+  bus-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the clock frequency for QUICC Engine.
+
+  fsl,qe-num-riscs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: define how many RISC engines the QE has.
+
+  fsl,qe-snums:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 28
+    description:
+      defining the array of serial number (SNUM) values for the virtual
+      threads.
+
+  fsl,firmware-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      required only if there is no fsl,qe-firmware child node
+
+      Points to a firmware node (see "QE Firmware Node" below)
+      that contains the firmware that should be uploaded for this QE.
+      The compatible property for the firmware node should say,
+      "fsl,qe-firmware".
+
+  brg-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      the internal clock source frequency for baud-rate
+      generators in Hz.
+
+  fsl,qe-num-snums:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description: |
+      define how many serial number(SNUM) the QE can use
+      for the threads. Use fsl,qe-snums instead to not only specify the
+      number of snums, but also their values.
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,qe-muram.yaml
+
+  '^interrupt-controller@[a-f0-9]+$':
+    $ref: fsl,qe-ic.yaml
+
+  '^si@[a-f0-9]+$':
+    $ref: fsl,qe-si.yaml
+
+  '^siram@[a-f0-9]+$':
+    $ref: fsl,qe-siram.yaml
+
+required:
+  - compatible
+  - reg
+  - bus-frequency
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qe-bus@e0100000 {
+        compatible = "fsl,qe", "simple-bus";
+        reg = <0xe0100000 0x480>;
+        ranges = <0 0xe0100000 0x00100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        brg-frequency = <0>;
+        bus-frequency = <0x179a7b00>;
+        fsl,qe-snums = /bits/ 8 <
+            0x04 0x05 0x0c 0x0d 0x14 0x15 0x1c 0x1d
+            0x24 0x25 0x2c 0x2d 0x34 0x35 0x88 0x89
+            0x98 0x99 0xa8 0xa9 0xb8 0xb9 0xc8 0xc9
+            0xd8 0xd9 0xe8 0xe9>;
+
+        interrupt-controller@80 {
+            compatible = "fsl,qe-ic";
+            reg = <0x80 0x80>;
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts = <95 2 0 0  94 2 0 0>;
+        };
+
+        si@700 {
+            compatible = "fsl,t1040-qe-si";
+            reg = <0x700 0x80>;
+        };
+
+        siram@1000 {
+          compatible = "fsl,t1040-qe-siram";
+          reg = <0x1000 0x800>;
+        };
+
+        muram@10000 {
+            compatible = "fsl,qe-muram", "fsl,cpm-muram";
+            ranges = <0 0x00010000 0x0000c000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+              data-only@0{
+                  compatible = "fsl,qe-muram-data",
+                              "fsl,cpm-muram-data";
+                  reg = <0 0xc000>;
+              };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
deleted file mode 100644
index 05ec2a838c54b..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
+++ /dev/null
@@ -1,178 +0,0 @@ 
-* Freescale QUICC Engine module (QE)
-This represents qe module that is installed on PowerQUICC II Pro.
-
-NOTE:  This is an interim binding; it should be updated to fit
-in with the CPM binding later in this document.
-
-Basically, it is a bus of devices, that could act more or less
-as a complete entity (UCC, USB etc ). All of them should be siblings on
-the "root" qe node, using the common properties from there.
-The description below applies to the qe of MPC8360 and
-more nodes and properties would be extended in the future.
-
-i) Root QE device
-
-Required properties:
-- compatible : should be "fsl,qe";
-- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
-- reg : offset and length of the device registers.
-- bus-frequency : the clock frequency for QUICC Engine.
-- fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
-  defining the array of serial number (SNUM) values for the virtual
-  threads.
-
-Optional properties:
-- fsl,firmware-phandle:
-    Usage: required only if there is no fsl,qe-firmware child node
-    Value type: <phandle>
-    Definition: Points to a firmware node (see "QE Firmware Node" below)
-        that contains the firmware that should be uploaded for this QE.
-        The compatible property for the firmware node should say,
-        "fsl,qe-firmware".
-
-Recommended properties
-- brg-frequency : the internal clock source frequency for baud-rate
-  generators in Hz.
-
-Deprecated properties
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
-  for the threads. Use fsl,qe-snums instead to not only specify the
-  number of snums, but also their values.
-
-Example:
-     qe@e0100000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <2>;
-	compatible = "fsl,qe";
-	ranges = <0 e0100000 00100000>;
-	reg = <e0100000 480>;
-	brg-frequency = <0>;
-	bus-frequency = <179A7B00>;
-	fsl,qe-snums = /bits/ 8 <
-		0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
-		0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
-		0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
-		0xD8 0xD9 0xE8 0xE9>;
-     }
-
-* Multi-User RAM (MURAM)
-
-Required properties:
-- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
-- mode : the could be "host" or "slave".
-- ranges : Should be defined as specified in 1) to describe the
-   translation of MURAM addresses.
-- data-only : sub-node which defines the address area under MURAM
-   bus that can be allocated as data/parameter
-
-Example:
-
-     muram@10000 {
-	compatible = "fsl,qe-muram", "fsl,cpm-muram";
-	ranges = <0 00010000 0000c000>;
-
-	data-only@0{
-		compatible = "fsl,qe-muram-data",
-			     "fsl,cpm-muram-data";
-		reg = <0 c000>;
-	};
-     };
-
-* Interrupt Controller (IC)
-
-Required properties:
-- compatible : should be "fsl,qe-ic".
-- reg : Address range of IC register set.
-- interrupts : interrupts generated by the device.
-- interrupt-controller : this device is a interrupt controller.
-
-Example:
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <95 2 0 0  94 2 0 0>;
-	};
-
-* Serial Interface Block (SI)
-
-The SI manages the routing of eight TDM lines to the QE block serial drivers
-, the MCC and the UCCs, for receive and transmit.
-
-Required properties:
-- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
-  "fsl,t1040-qe-si".
-- reg : Address range of SI register set.
-
-Example:
-
-	si1: si@700 {
-		compatible = "fsl,t1040-qe-si";
-		reg = <0x700 0x80>;
-	};
-
-* Serial Interface Block RAM(SIRAM)
-
-store the routing entries of SI
-
-Required properties:
-- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
-  "fsl,t1040-qe-siram".
-- reg : Address range of SI RAM.
-
-Example:
-
-	siram1: siram@1000 {
-		compatible = "fsl,t1040-qe-siram";
-		reg = <0x1000 0x800>;
-	};
-
-* QE Firmware Node
-
-This node defines a firmware binary that is embedded in the device tree, for
-the purpose of passing the firmware from bootloader to the kernel, or from
-the hypervisor to the guest.
-
-The firmware node itself contains the firmware binary contents, a compatible
-property, and any firmware-specific properties.  The node should be placed
-inside a QE node that needs it.  Doing so eliminates the need for a
-fsl,firmware-phandle property.  Other QE nodes that need the same firmware
-should define an fsl,firmware-phandle property that points to the firmware node
-in the first QE node.
-
-The fsl,firmware property can be specified in the DTS (possibly using incbin)
-or can be inserted by the boot loader at boot time.
-
-Required properties:
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: A standard property.  Specify a string that indicates what
-          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
-
-   - fsl,firmware
-      Usage: required
-      Value type: <prop-encoded-array>, encoded as an array of bytes
-      Definition: A standard property.  This property contains the firmware
-          binary "blob".
-
-Example:
-	qe1@e0080000 {
-		compatible = "fsl,qe";
-		qe_firmware:qe-firmware {
-			compatible = "fsl,qe-firmware";
-			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
-		};
-		...
-	};
-
-	qe2@e0090000 {
-		compatible = "fsl,qe";
-		fsl,firmware-phandle = <&qe_firmware>;
-		...
-	};