diff mbox series

[6/6] arm64: dts: imx93: add ddr edac support

Message ID 20240709-imx95_edac-v1-6-3e9c146c1b01@nxp.com (mailing list archive)
State Superseded
Headers show
Series EDAC: fsl-ddr, add imx9 support | expand

Commit Message

Frank Li July 9, 2024, 8:23 p.m. UTC
Add ddr edac support for imx93.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Peng Fan July 10, 2024, 2:25 a.m. UTC | #1
> Subject: [PATCH 6/6] arm64: dts: imx93: add ddr edac support
> 
> Add ddr edac support for imx93.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 4a3f42355cb8f..6faba848fe286 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -1279,6 +1279,14 @@ usbmisc2: usbmisc@4c200200 {
>  			#index-cells = <1>;
>  		};
> 
> +		memory-controller@4e300000 {
> +			compatible = "nxp,imx9-memory-controller";
> +			reg = <0x4e300000 0x800>, <0x4e301000
> 0x1000>;
> +			reg-names = "ctrl", "inject";
> +			interrupts = <GIC_SPI 91
> IRQ_TYPE_LEVEL_HIGH>;
> +			little-endian;
> +		};
> +
>  		ddr-pmu@4e300dc0 {

Should the ddr-pmu be part of memory controller?

Regards,
Peng.

>  			compatible = "fsl,imx93-ddr-pmu";
>  			reg = <0x4e300dc0 0x200>;
> 
> --
> 2.34.1
>
Frank Li July 10, 2024, 2:38 p.m. UTC | #2
On Wed, Jul 10, 2024 at 02:25:02AM +0000, Peng Fan wrote:
> > Subject: [PATCH 6/6] arm64: dts: imx93: add ddr edac support
> > 
> > Add ddr edac support for imx93.
> > 
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > index 4a3f42355cb8f..6faba848fe286 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > @@ -1279,6 +1279,14 @@ usbmisc2: usbmisc@4c200200 {
> >  			#index-cells = <1>;
> >  		};
> > 
> > +		memory-controller@4e300000 {
> > +			compatible = "nxp,imx9-memory-controller";
> > +			reg = <0x4e300000 0x800>, <0x4e301000
> > 0x1000>;
> > +			reg-names = "ctrl", "inject";
> > +			interrupts = <GIC_SPI 91
> > IRQ_TYPE_LEVEL_HIGH>;
> > +			little-endian;
> > +		};
> > +
> >  		ddr-pmu@4e300dc0 {
> 
> Should the ddr-pmu be part of memory controller?

imx9-memory-controller is actually EDAC, which independent with ddr pmu.
I think ddr-pmu should be seperate node.

Frank

> 
> Regards,
> Peng.
> 
> >  			compatible = "fsl,imx93-ddr-pmu";
> >  			reg = <0x4e300dc0 0x200>;
> > 
> > --
> > 2.34.1
> > 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 4a3f42355cb8f..6faba848fe286 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1279,6 +1279,14 @@  usbmisc2: usbmisc@4c200200 {
 			#index-cells = <1>;
 		};
 
+		memory-controller@4e300000 {
+			compatible = "nxp,imx9-memory-controller";
+			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+			reg-names = "ctrl", "inject";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
 		ddr-pmu@4e300dc0 {
 			compatible = "fsl,imx93-ddr-pmu";
 			reg = <0x4e300dc0 0x200>;