diff mbox series

gpio: vf610: add get_direction() support

Message ID 20240722062809.915867-1-haibo.chen@nxp.com (mailing list archive)
State New
Headers show
Series gpio: vf610: add get_direction() support | expand

Commit Message

Bough Chen July 22, 2024, 6:28 a.m. UTC
From: Haibo Chen <haibo.chen@nxp.com>

For IP which do not contain PDDR, currently use the pinmux API
pinctrl_gpio_direction_input() to config the output/input, pinmux
currently do not support get_direction(). So here add the GPIO
get_direction() support only for the IP which has Port Data
Direction Register (PDDR).

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/gpio/gpio-vf610.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Stefan Wahren July 22, 2024, 10:32 a.m. UTC | #1
Hi Haibo,

Am 22.07.24 um 08:28 schrieb haibo.chen@nxp.com:
> From: Haibo Chen <haibo.chen@nxp.com>
>
> For IP which do not contain PDDR, currently use the pinmux API
> pinctrl_gpio_direction_input() to config the output/input, pinmux
> currently do not support get_direction(). So here add the GPIO
> get_direction() support only for the IP which has Port Data
> Direction Register (PDDR).
>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
> ---
>   drivers/gpio/gpio-vf610.c | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
> index 07e5e6323e86..08ca8377b19c 100644
> --- a/drivers/gpio/gpio-vf610.c
> +++ b/drivers/gpio/gpio-vf610.c
> @@ -151,6 +151,19 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
>   	return pinctrl_gpio_direction_output(chip, gpio);
>   }
>
> +static int vf610_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
> +{
> +	struct vf610_gpio_port *port = gpiochip_get_data(gc);
> +	unsigned long mask = BIT(gpio);
thanks for sending this patch. I'm fine with this patch, but could we
use u32 to make it clear about the range of the mask?

Regards
> +
> +	mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
> +
> +	if (mask)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
> +}
> +
>   static void vf610_gpio_irq_handler(struct irq_desc *desc)
>   {
>   	struct vf610_gpio_port *port =
> @@ -362,6 +375,12 @@ static int vf610_gpio_probe(struct platform_device *pdev)
>   	gc->get = vf610_gpio_get;
>   	gc->direction_output = vf610_gpio_direction_output;
>   	gc->set = vf610_gpio_set;
> +	/*
> +	 * only IP has Port Data Direction Register(PDDR) can
> +	 * support get direction
> +	 */
> +	if (port->sdata->have_paddr)
> +		gc->get_direction = vf610_gpio_get_direction;
>
>   	/* Mask all GPIO interrupts */
>   	for (i = 0; i < gc->ngpio; i++)
Bough Chen July 23, 2024, 2:45 a.m. UTC | #2
> -----Original Message-----
> From: Stefan Wahren <wahrenst@gmx.net>
> Sent: 2024年7月22日 18:32
> To: Bough Chen <haibo.chen@nxp.com>; linus.walleij@linaro.org;
> brgl@bgdev.pl
> Cc: linux-gpio@vger.kernel.org; linux-kernel@vger.kernel.org;
> imx@lists.linux.dev
> Subject: Re: [PATCH] gpio: vf610: add get_direction() support
> 
> Hi Haibo,
> 
> Am 22.07.24 um 08:28 schrieb haibo.chen@nxp.com:
> > From: Haibo Chen <haibo.chen@nxp.com>
> >
> > For IP which do not contain PDDR, currently use the pinmux API
> > pinctrl_gpio_direction_input() to config the output/input, pinmux
> > currently do not support get_direction(). So here add the GPIO
> > get_direction() support only for the IP which has Port Data Direction
> > Register (PDDR).
> >
> > Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
> > ---
> >   drivers/gpio/gpio-vf610.c | 19 +++++++++++++++++++
> >   1 file changed, 19 insertions(+)
> >
> > diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
> > index 07e5e6323e86..08ca8377b19c 100644
> > --- a/drivers/gpio/gpio-vf610.c
> > +++ b/drivers/gpio/gpio-vf610.c
> > @@ -151,6 +151,19 @@ static int vf610_gpio_direction_output(struct
> gpio_chip *chip, unsigned gpio,
> >   	return pinctrl_gpio_direction_output(chip, gpio);
> >   }
> >
> > +static int vf610_gpio_get_direction(struct gpio_chip *gc, unsigned
> > +int gpio) {
> > +	struct vf610_gpio_port *port = gpiochip_get_data(gc);
> > +	unsigned long mask = BIT(gpio);
> thanks for sending this patch. I'm fine with this patch, but could we use u32 to
> make it clear about the range of the mask?

Yes, u32 seems more clear here, but I notice all other place use unsigned long, so I keep the same code style.
I go through the history of this driver, seems no specific explanation about the unsigned long. 
If anyone know the reason, please comment.

Best Regards
Haibo Chen 
> 
> Regards
> > +
> > +	mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
> > +
> > +	if (mask)
> > +		return GPIO_LINE_DIRECTION_OUT;
> > +
> > +	return GPIO_LINE_DIRECTION_IN;
> > +}
> > +
> >   static void vf610_gpio_irq_handler(struct irq_desc *desc)
> >   {
> >   	struct vf610_gpio_port *port =
> > @@ -362,6 +375,12 @@ static int vf610_gpio_probe(struct platform_device
> *pdev)
> >   	gc->get = vf610_gpio_get;
> >   	gc->direction_output = vf610_gpio_direction_output;
> >   	gc->set = vf610_gpio_set;
> > +	/*
> > +	 * only IP has Port Data Direction Register(PDDR) can
> > +	 * support get direction
> > +	 */
> > +	if (port->sdata->have_paddr)
> > +		gc->get_direction = vf610_gpio_get_direction;
> >
> >   	/* Mask all GPIO interrupts */
> >   	for (i = 0; i < gc->ngpio; i++)
Stefan Wahren July 29, 2024, 4:27 p.m. UTC | #3
Am 23.07.24 um 04:45 schrieb Bough Chen:
>> -----Original Message-----
>> From: Stefan Wahren <wahrenst@gmx.net>
>> Sent: 2024年7月22日 18:32
>> To: Bough Chen <haibo.chen@nxp.com>; linus.walleij@linaro.org;
>> brgl@bgdev.pl
>> Cc: linux-gpio@vger.kernel.org; linux-kernel@vger.kernel.org;
>> imx@lists.linux.dev
>> Subject: Re: [PATCH] gpio: vf610: add get_direction() support
>>
>> Hi Haibo,
>>
>> Am 22.07.24 um 08:28 schrieb haibo.chen@nxp.com:
>>> From: Haibo Chen <haibo.chen@nxp.com>
>>>
>>> For IP which do not contain PDDR, currently use the pinmux API
>>> pinctrl_gpio_direction_input() to config the output/input, pinmux
>>> currently do not support get_direction(). So here add the GPIO
>>> get_direction() support only for the IP which has Port Data Direction
>>> Register (PDDR).
>>>
>>> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
>>> ---
>>>    drivers/gpio/gpio-vf610.c | 19 +++++++++++++++++++
>>>    1 file changed, 19 insertions(+)
>>>
>>> diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
>>> index 07e5e6323e86..08ca8377b19c 100644
>>> --- a/drivers/gpio/gpio-vf610.c
>>> +++ b/drivers/gpio/gpio-vf610.c
>>> @@ -151,6 +151,19 @@ static int vf610_gpio_direction_output(struct
>> gpio_chip *chip, unsigned gpio,
>>>    	return pinctrl_gpio_direction_output(chip, gpio);
>>>    }
>>>
>>> +static int vf610_gpio_get_direction(struct gpio_chip *gc, unsigned
>>> +int gpio) {
>>> +	struct vf610_gpio_port *port = gpiochip_get_data(gc);
>>> +	unsigned long mask = BIT(gpio);
>> thanks for sending this patch. I'm fine with this patch, but could we use u32 to
>> make it clear about the range of the mask?
> Yes, u32 seems more clear here, but I notice all other place use unsigned long, so I keep the same code style.
> I go through the history of this driver, seems no specific explanation about the unsigned long.
I understand, but i don't think there is a reason for using unsigned
long. So maybe this is a good opportunity to clean this up.

Regards
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 07e5e6323e86..08ca8377b19c 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -151,6 +151,19 @@  static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
 	return pinctrl_gpio_direction_output(chip, gpio);
 }
 
+static int vf610_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct vf610_gpio_port *port = gpiochip_get_data(gc);
+	unsigned long mask = BIT(gpio);
+
+	mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+
+	if (mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
 static void vf610_gpio_irq_handler(struct irq_desc *desc)
 {
 	struct vf610_gpio_port *port =
@@ -362,6 +375,12 @@  static int vf610_gpio_probe(struct platform_device *pdev)
 	gc->get = vf610_gpio_get;
 	gc->direction_output = vf610_gpio_direction_output;
 	gc->set = vf610_gpio_set;
+	/*
+	 * only IP has Port Data Direction Register(PDDR) can
+	 * support get direction
+	 */
+	if (port->sdata->have_paddr)
+		gc->get_direction = vf610_gpio_get_direction;
 
 	/* Mask all GPIO interrupts */
 	for (i = 0; i < gc->ngpio; i++)