diff mbox series

[1/1] dt-bindings: soc: fsl: cpm_qe: convert network.txt to yaml

Message ID 20240809175113.3470393-1-Frank.Li@nxp.com (mailing list archive)
State Superseded
Headers show
Series [1/1] dt-bindings: soc: fsl: cpm_qe: convert network.txt to yaml | expand

Commit Message

Frank Li Aug. 9, 2024, 5:51 p.m. UTC
Convert binding doc newwork.txt to yaml format.

HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.

ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml

mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
This one is quite old. The detail informaiton is limited.
---
 .../devicetree/bindings/net/fsl,cpm-enet.yaml |  59 ++++++++
 .../devicetree/bindings/net/fsl,cpm-mdio.yaml |  55 +++++++
 .../bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml | 140 ++++++++++++++++++
 .../bindings/soc/fsl/cpm_qe/network.txt       | 130 ----------------
 4 files changed, 254 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
 create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
new file mode 100644
index 0000000000000..da836477e8bad
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
@@ -0,0 +1,59 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Network for cpm enet
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,cpm1-scc-enet
+          - fsl,cpm2-scc-enet
+          - fsl,cpm1-fec-enet
+          - fsl,cpm2-fcc-enet
+          - fsl,qe-enet
+      - items:
+          - enum:
+              - fsl,mpc8272-fcc-enet
+          - const: fsl,cpm2-fcc-enet
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  fsl,cpm-command:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: cpm command
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@11300 {
+        compatible = "fsl,mpc8272-fcc-enet",
+                     "fsl,cpm2-fcc-enet";
+        reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        interrupts = <20 8>;
+        interrupt-parent = <&pic>;
+        phy-handle = <&phy0>;
+        fsl,cpm-command = <0x12000300>;
+    };
+
diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
new file mode 100644
index 0000000000000..b1791a3c490e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale CPM MDIO Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,pq1-fec-mdio
+          - fsl,cpm2-mdio-bitbang
+      - items:
+          - const: fsl,mpc8272ads-mdio-bitbang
+          - const: fsl,mpc8272-mdio-bitbang
+          - const: fsl,cpm2-mdio-bitbang
+
+  reg:
+    maxItems: 1
+
+  fsl,mdio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: pin of port C controlling mdio data
+
+  fsl,mdc-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: pin of port C controlling mdio clock
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@10d40 {
+        compatible = "fsl,mpc8272ads-mdio-bitbang",
+                     "fsl,mpc8272-mdio-bitbang",
+                     "fsl,cpm2-mdio-bitbang";
+        reg = <0x10d40 0x14>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        fsl,mdio-pin = <12>;
+        fsl,mdc-pin = <13>;
+    };
+
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
new file mode 100644
index 0000000000000..64ffbf75dd9d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
@@ -0,0 +1,140 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-Level Data Link Control(HDLC)
+
+description: HDLC part in Universal communication controllers (UCCs)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ucc-hdlc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rx-clock-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    oneOf:
+      - pattern: "^brg([0-9]|1[0-6])$"
+      - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+  tx-clock-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    oneOf:
+      - pattern: "^brg([0-9]|1[0-6])$"
+      - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+  fsl,tdm-interface:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Specify that hdlc is based on tdm-interface
+
+  fsl,rx-sync-clock:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: rx-sync
+    enum:
+      - none
+      - rsync_pin
+      - brg9
+      - brg10
+      - brg11
+      - brg13
+      - brg14
+      - brg15
+
+  fsl,tx-sync-clock:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: tx-sync
+    enum:
+      - none
+      - tsync_pin
+      - brg9
+      - brg10
+      - brg11
+      - brg13
+      - brg14
+      - brg15
+
+  fsl,tdm-framer-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: required for tdm interface
+    enum: [e1, t1]
+
+  fsl,tdm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of TDM ID
+
+  fsl,tx-timeslot-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface.
+      time slot mask for TDM operation. Indicates which time
+      slots used for transmitting and receiving.
+
+  fsl,rx-timeslot-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface.
+      time slot mask for TDM operation. Indicates which time
+      slots used for transmitting and receiving.
+
+  fsl,siram-entry-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface
+      Must be 0,2,4...64. the number of TDM entry.
+
+  fsl,tdm-internal-loopback:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      optional for tdm interface
+      Internal loopback connecting on TDM layer.
+
+  fsl,hmask:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description: |
+      HDLC address recognition. Set to zero to disable
+      address filtering of packets:
+      fsl,hmask = /bits/ 16 <0x0000>;
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    communication@2000 {
+        compatible = "fsl,ucc-hdlc";
+        reg = <0x2000 0x200>;
+        rx-clock-name = "clk8";
+        tx-clock-name = "clk9";
+        fsl,rx-sync-clock = "rsync_pin";
+        fsl,tx-sync-clock = "tsync_pin";
+        fsl,tx-timeslot-mask = <0xfffffffe>;
+        fsl,rx-timeslot-mask = <0xfffffffe>;
+        fsl,tdm-framer-type = "e1";
+        fsl,tdm-id = <0>;
+        fsl,siram-entry-id = <0>;
+        fsl,tdm-interface;
+    };
+
+  - |
+    communication@2000 {
+        compatible = "fsl,ucc-hdlc";
+        reg = <0x2000 0x200>;
+        rx-clock-name = "brg1";
+        tx-clock-name = "brg1";
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
deleted file mode 100644
index 6d2dd8a31482a..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
+++ /dev/null
@@ -1,130 +0,0 @@ 
-* Network
-
-Currently defined compatibles:
-- fsl,cpm1-scc-enet
-- fsl,cpm2-scc-enet
-- fsl,cpm1-fec-enet
-- fsl,cpm2-fcc-enet (third resource is GFEMR)
-- fsl,qe-enet
-
-Example:
-
-	ethernet@11300 {
-		compatible = "fsl,mpc8272-fcc-enet",
-			     "fsl,cpm2-fcc-enet";
-		reg = <11300 20 8400 100 11390 1>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		interrupts = <20 8>;
-		interrupt-parent = <&PIC>;
-		phy-handle = <&PHY0>;
-		fsl,cpm-command = <12000300>;
-	};
-
-* MDIO
-
-Currently defined compatibles:
-fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
-fsl,cpm2-mdio-bitbang (reg is port C registers)
-
-Properties for fsl,cpm2-mdio-bitbang:
-fsl,mdio-pin : pin of port C controlling mdio data
-fsl,mdc-pin : pin of port C controlling mdio clock
-
-Example:
-	mdio@10d40 {
-		compatible = "fsl,mpc8272ads-mdio-bitbang",
-			     "fsl,mpc8272-mdio-bitbang",
-			     "fsl,cpm2-mdio-bitbang";
-		reg = <10d40 14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fsl,mdio-pin = <12>;
-		fsl,mdc-pin = <13>;
-	};
-
-* HDLC
-
-Currently defined compatibles:
-- fsl,ucc-hdlc
-
-Properties for fsl,ucc-hdlc:
-- rx-clock-name
-- tx-clock-name
-	Usage: required
-	Value type: <string>
-	Definition : Must be "brg1"-"brg16" for internal clock source,
-		     Must be "clk1"-"clk24" for external clock source.
-
-- fsl,tdm-interface
-	Usage: optional
-	Value type: <empty>
-	Definition : Specify that hdlc is based on tdm-interface
-
-The property below is dependent on fsl,tdm-interface:
-- fsl,rx-sync-clock
-	Usage: required
-	Value type: <string>
-	Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tx-sync-clock
-	Usage: required
-	Value type: <string>
-	Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tdm-framer-type
-	Usage: required for tdm interface
-	Value type: <string>
-	Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
-		     are not supported.
-
-- fsl,tdm-id
-	Usage: required for tdm interface
-	Value type: <u32>
-	Definition : number of TDM ID
-
-- fsl,tx-timeslot-mask
-- fsl,rx-timeslot-mask
-	Usage: required for tdm interface
-	Value type: <u32>
-	Definition : time slot mask for TDM operation. Indicates which time
-		     slots used for transmitting and receiving.
-
-- fsl,siram-entry-id
-	Usage: required for tdm interface
-	Value type: <u32>
-	Definition : Must be 0,2,4...64. the number of TDM entry.
-
-- fsl,tdm-internal-loopback
-	usage: optional for tdm interface
-	value type: <empty>
-	Definition : Internal loopback connecting on TDM layer.
-- fsl,hmask
-	usage: optional
-	Value type: <u16>
-	Definition: HDLC address recognition. Set to zero to disable
-		    address filtering of packets:
-		    fsl,hmask = /bits/ 16 <0x0000>;
-
-Example for tdm interface:
-
-	ucc@2000 {
-		compatible = "fsl,ucc-hdlc";
-		rx-clock-name = "clk8";
-		tx-clock-name = "clk9";
-		fsl,rx-sync-clock = "rsync_pin";
-		fsl,tx-sync-clock = "tsync_pin";
-		fsl,tx-timeslot-mask = <0xfffffffe>;
-		fsl,rx-timeslot-mask = <0xfffffffe>;
-		fsl,tdm-framer-type = "e1";
-		fsl,tdm-id = <0>;
-		fsl,siram-entry-id = <0>;
-		fsl,tdm-interface;
-	};
-
-Example for hdlc without tdm interface:
-
-	ucc@2000 {
-		compatible = "fsl,ucc-hdlc";
-		rx-clock-name = "brg1";
-		tx-clock-name = "brg1";
-	};