Message ID | 20240820143911.444048-1-Frank.Li@nxp.com (mailing list archive) |
---|---|
State | In Next, archived |
Headers | show |
Series | [v4,1/1] dt-bindings: extcon: ptn5150: add child node port | expand |
On Tue, Aug 20, 2024 at 10:39:11AM -0400, Frank Li wrote: > Add child node 'port' to allow connect to usb controller to do role-switch > if id pin of ptn5150 have not connected to chip's usb ID function pin. > > Fix below warning: > arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
24. 8. 20. 23:39에 Frank Li 이(가) 쓴 글: > Add child node 'port' to allow connect to usb controller to do role-switch > if id pin of ptn5150 have not connected to chip's usb ID function pin. > > Fix below warning: > arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > Change from v3 to v4 > - remove extra empty line > - fix Indentation in example > Change from v2 to v3 > - only add port to existed example. > Change from v1 to v2 > - add example for id pin have not connect to main chip's id example. > - commit 095b96b2b fix "port" warning, but add new warning "connector" is > not exist. And follow commit revert this change. > 690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector > - I have not board in hand to debug why "connector" is not work. > --- > .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml > index d5cfa32ea52dd..072b3c0c5fd03 100644 > --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml > +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml > @@ -37,6 +37,11 @@ properties: > GPIO pin (output) used to control VBUS. If skipped, no such control > takes place. > > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + A port node to link the usb controller for the dual role switch. > + > required: > - compatible > - interrupts > @@ -58,5 +63,11 @@ examples: > interrupt-parent = <&msmgpio>; > interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; > vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; > + > + port { > + endpoint { > + remote-endpoint = <&usb1_drd_sw>; > + }; > + }; > }; > }; Applied it. Thanks.
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52dd..072b3c0c5fd03 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -37,6 +37,11 @@ properties: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + required: - compatible - interrupts @@ -58,5 +63,11 @@ examples: interrupt-parent = <&msmgpio>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; };
Add child node 'port' to allow connect to usb controller to do role-switch if id pin of ptn5150 have not connected to chip's usb ID function pin. Fix below warning: arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Change from v3 to v4 - remove extra empty line - fix Indentation in example Change from v2 to v3 - only add port to existed example. Change from v1 to v2 - add example for id pin have not connect to main chip's id example. - commit 095b96b2b fix "port" warning, but add new warning "connector" is not exist. And follow commit revert this change. 690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector - I have not board in hand to debug why "connector" is not work. --- .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)