diff mbox series

[v2,2/3] pmdomain: imx93-pd: don't unprepare clocks on driver remove

Message ID 20240825143428.556439-2-dario.binacchi@amarulasolutions.com (mailing list archive)
State New
Headers show
Series [v2,1/3] pmdomain: imx93-pd: replace dev_err() with dev_err_probe() | expand

Commit Message

Dario Binacchi Aug. 25, 2024, 2:34 p.m. UTC
The removed code was added to handle the case where the power domain is
already on during the driver's probing. In this use case, the "is_off"
parameter is passed as false to pm_genpd_init() to inform it not to call
the power_on() callback, as it's unnecessary to perform the hardware
power-on procedure since the power domain is already on. Therefore, with
the call to clk_bulk_prepare_enable() by probe(), the system is in the
same operational state as when "is_off" is passed as true after the
power_on() callback execution:

 probe() -> is_off == true  -> clk_bulk_prepare_enable() called by power_on()
 probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()

Reaching the same logical and operational state, it follows that upon
driver removal, there is no need to perform different actions depending
on the power domain's on/off state during probing.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

(no changes since v1)

 drivers/pmdomain/imx/imx93-pd.c | 3 ---
 1 file changed, 3 deletions(-)

Comments

Ulf Hansson Sept. 13, 2024, 12:01 p.m. UTC | #1
On Sun, 25 Aug 2024 at 16:34, Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> The removed code was added to handle the case where the power domain is
> already on during the driver's probing. In this use case, the "is_off"
> parameter is passed as false to pm_genpd_init() to inform it not to call
> the power_on() callback, as it's unnecessary to perform the hardware
> power-on procedure since the power domain is already on. Therefore, with
> the call to clk_bulk_prepare_enable() by probe(), the system is in the
> same operational state as when "is_off" is passed as true after the
> power_on() callback execution:
>
>  probe() -> is_off == true  -> clk_bulk_prepare_enable() called by power_on()
>  probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()
>
> Reaching the same logical and operational state, it follows that upon
> driver removal, there is no need to perform different actions depending
> on the power domain's on/off state during probing.

Well, I guess in most cases genpd would have tried to turn off the PM
domain when it is getting removed. However, there are really no
guarantees for that to happen. We should probably look into that as a
general improvement for genpd.

>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

The above said, this still looks like an improvement to me, so I
decided to queue this up for next, thanks!

Kind regards
Uffe


> ---
>
> (no changes since v1)
>
>  drivers/pmdomain/imx/imx93-pd.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/drivers/pmdomain/imx/imx93-pd.c b/drivers/pmdomain/imx/imx93-pd.c
> index 44daecbe5cc3..fb53a8e359bc 100644
> --- a/drivers/pmdomain/imx/imx93-pd.c
> +++ b/drivers/pmdomain/imx/imx93-pd.c
> @@ -90,9 +90,6 @@ static void imx93_pd_remove(struct platform_device *pdev)
>         struct device *dev = &pdev->dev;
>         struct device_node *np = dev->of_node;
>
> -       if (!domain->init_off)
> -               clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> -
>         of_genpd_del_provider(np);
>         pm_genpd_remove(&domain->genpd);
>  }
> --
> 2.43.0
>
diff mbox series

Patch

diff --git a/drivers/pmdomain/imx/imx93-pd.c b/drivers/pmdomain/imx/imx93-pd.c
index 44daecbe5cc3..fb53a8e359bc 100644
--- a/drivers/pmdomain/imx/imx93-pd.c
+++ b/drivers/pmdomain/imx/imx93-pd.c
@@ -90,9 +90,6 @@  static void imx93_pd_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 
-	if (!domain->init_off)
-		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
-
 	of_genpd_del_provider(np);
 	pm_genpd_remove(&domain->genpd);
 }