diff mbox series

[1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file

Message ID 20240905221020.2159230-1-Frank.Li@nxp.com (mailing list archive)
State Superseded
Headers show
Series [1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file | expand

Commit Message

Frank Li Sept. 5, 2024, 10:10 p.m. UTC
Add an overlay file to enable I3C support on the i.MX93, replacing I2C1
with I3C. I3C is compatible with I2C, but it has not yet been enabled in
arm64's defconfig. This overlay allows users to conveniently utilize I3C
on the imx93-9x9-qsb platform until I3C and its driver become more mature
and ready for full switch to I3C.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  4 +
 .../boot/dts/freescale/imx93-9x9-qsb-i3c.dtso | 73 +++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso

Comments

Peng Fan Sept. 6, 2024, 8:07 a.m. UTC | #1
> Subject: [PATCH 1/1] arm64: dts: imx93-9x9-qsb: add I3C overlay file
> 
> Add an overlay file to enable I3C support on the i.MX93, replacing I2C1
> with I3C. I3C is compatible with I2C, but it has not yet been enabled in
> arm64's defconfig. This overlay allows users to conveniently utilize I3C
> on the imx93-9x9-qsb platform until I3C and its driver become more
> mature and ready for full switch to I3C.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |  4 +
>  .../boot/dts/freescale/imx93-9x9-qsb-i3c.dtso | 73
> +++++++++++++++++++
>  2 files changed, 77 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb-
> i3c.dtso
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 9d3df8b218a2e..032f07adc0c53 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -240,6 +240,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-
> mek.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
> +
> +imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
> +
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb diff --git
> a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
> b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
> new file mode 100644
> index 0000000000000..94d562fa8077d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 NXP

Update '2022' to '2024'.

> + */
> +
> +#include <dt-bindings/clock/imx93-clock.h> 

Drop this include.

#include
> +<dt-bindings/interrupt-controller/arm-gic.h>

Use irq.h

Regards,
Peng.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 9d3df8b218a2e..032f07adc0c53 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -240,6 +240,10 @@  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
+
+imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
new file mode 100644
index 0000000000000..94d562fa8077d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
@@ -0,0 +1,73 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&lpi2c1 {
+	status = "disabled";
+};
+
+&i3c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i3c1>;
+	#address-cells = <3>;
+	#size-cells = <0>;
+	i2c-scl-hz = <400000>;
+	status = "okay";
+
+	tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb1_drd_sw {
+	remote-endpoint = <&typec1_dr_sw>;
+};
+
+&iomuxc {
+	pinctrl_i3c1: i3c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__I3C1_SCL	0x40000186
+			MX93_PAD_I2C1_SDA__I3C1_SDA	0x40000186
+		>;
+	};
+};