diff mbox series

[v2,4/4] arm64: dts: imx8qm-mek: Add PCIe and sata

Message ID 20241003181542.620461-4-Frank.Li@nxp.com (mailing list archive)
State New
Headers show
Series [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support | expand

Commit Message

Frank Li Oct. 3, 2024, 6:15 p.m. UTC
Add PCIe[a,b] and sata support for i.MX8QM-MEK board.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- add space before {
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 62 ++++++++++++++++++++
 1 file changed, 62 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 62203eed6a6cb..e983633a4bb31 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -181,6 +181,17 @@  reg_can2_stby: regulator-can2-stby {
 		vin-supply = <&reg_can2_en>;
 	};
 
+	reg_pciea: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_pciea_reg>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mpcie_3v3";
+		gpio = <&lsio_gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vref_1v8: regulator-adc-vref {
 		compatible = "regulator-fixed";
 		regulator-name = "vref_1v8";
@@ -296,6 +307,12 @@  &cm41_intmux {
 	status = "okay";
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
 &i2c0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -541,6 +558,25 @@  &fec2 {
 	status = "okay";
 };
 
+&pciea {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pciea>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pciea>;
+	status = "okay";
+};
+
+&pcieb {
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
 &qm_pwm_lvds0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_lvds0>;
@@ -640,6 +676,10 @@  &sai7 {
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -829,6 +869,28 @@  IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
 		>;
 	};
 
+	pinctrl_pciea: pcieagrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021
+			IMX8QM_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29		0x06000021
+			IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20
+		>;
+	};
+
+	pinctrl_pciea_reg: pcieareggrp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13			0x06000021
+		>;
+	};
+
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL1_CLKREQ_B_HSIO_PCIE1_CLKREQ_B		0x06000021
+			IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x04000021
+			IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x06000021
+		>;
+	};
+
 	pinctrl_pwm_lvds0: pwmlvds0grp {
 		fsl,pins = <
 			IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT		0x00000020